10. (10 pts) A road has two lanes going north and soutli, and the lanes are separated by a distance of 0.1 miles. One car, traveling North, is traveling at a constant 80 miles per hour. Another car, t

Answers

Answer 1

The two cars, one traveling north and the other traveling south, are on a road with two lanes separated by 0.1 miles. The car traveling north is going at a constant speed of 80 miles per hour.

To calculate the time it takes for the two cars to meet, we can use the concept of relative velocity. Since the cars are moving towards each other, their relative velocity is the sum of their individual velocities. In this case, the car traveling north has a velocity of 80 miles per hour, and the car traveling south has a velocity of 60 miles per hour (considering the opposite direction). The total relative velocity is 80 + 60 = 140 miles per hour.

To determine the time, we can divide the distance between the cars (0.1 miles) by the relative velocity (140 miles per hour). Dividing 0.1 by 140 gives us approximately 0.00071 hours. To convert this to minutes, we multiply by 60, resulting in approximately 0.0427 minutes, or about 2.6 seconds.

Therefore, it would take approximately 2.6 seconds for the two cars to meet on the road.

To learn more about speed click here: brainly.com/question/17661499

#SPJ11


Related Questions

00 = Which one of the following statements is TRUE If an = f(n), for all n > 0 and an converges, then n=1 O If an = f(n), for all n 2 0, then ans [° f(x) dx x) 19 f(x) dx converges = n=0 Ο The serie

Answers

The statement "If an = f(n), for all n > 0 and an converges, then n = 1" is TRUE.

If a sequence an is defined as a function f(n) for all n > 0 and the sequence converges, it means that as n approaches infinity, the terms of the sequence approach a fixed value. In this case, since an = f(n), it implies that as n approaches infinity, f(n) approaches a fixed value. Therefore, the statement n = 1 is true because the terms of the sequence an converge to the value of f(1).

Sure, let's dive into a more detailed explanation.

The statement "If an = f(n), for all n > 0 and an converges, then n = 1" is true. Here's why:

1. We start with the assumption that the sequence an is defined as a function f(n) for all n greater than 0. This means that each term of the sequence an is obtained by plugging in a positive integer value for n into the function f.

2. The statement also states that the sequence an converges. Convergence means that as we go towards infinity, the terms of the sequence approach a fixed value. In other words, the terms of the sequence get closer and closer to a particular number as n becomes larger.

3. Now, since an = f(n), it means that the terms of the sequence an are equal to the values of the function f evaluated at each positive integer value of n. So, as the terms of the sequence an converge, it implies that the function values f(n) also converge.

4. In the context of convergence, when n approaches infinity, f(n) approaches a fixed value. Therefore, as n approaches infinity, the function f(n) approaches a particular number.

5. The statement concludes that n = 1 is true. This means that the terms of the sequence an converge to the value of f(1). In other words, the first term of the sequence an corresponds to the value of the function f evaluated at n = 1.

To summarize, if a sequence is defined as a function of n and the sequence converges, it implies that the function values also converge. In this case, the terms of the sequence an converge to the value of the function f evaluated at n = 1.

Learn more about converges here:

https://brainly.com/question/29258536

#SPJ11

help
Graph the parabola. 16) y = -2x2 10 17) y = x2 + 4x + 4

Answers

To graph the given parabolas, we can analyze their equations and identify important properties such as the vertex, axis of symmetry, and direction of opening.

For the equation y = -2x^2 + 10, the parabola opens downward with its vertex at (0, 10). For the equation y = x^2 + 4x + 4, the parabola opens upward with its vertex at (-2, 0).

For the equation y = -2x^2 + 10, the coefficient of x^2 is negative (-2). This indicates that the parabola opens downward. The vertex of the parabola can be found using the formula x = -b / (2a), where a and b are coefficients in the quadratic equation. In this case, a = -2 and b = 0, so the x-coordinate of the vertex is 0. Substituting this value into the equation, we find the y-coordinate of the vertex as 10. Therefore, the vertex is located at (0, 10).

For the equation y = x^2 + 4x + 4, the coefficient of x^2 is positive (1). This indicates that the parabola opens upward. We can find the vertex using the same formula as before. Here, a = 1 and b = 4, so the x-coordinate of the vertex is -b / (2a) = -4 / (2 * 1) = -2. Plugging this value into the equation, we find the y-coordinate of the vertex as 0. Thus, the vertex is located at (-2, 0).

By using the information about the vertex and the direction of opening, we can plot the parabolas accurately on a graph.

To learn more about parabolas click here : brainly.com/question/29865441

#SPJ11




Find the indefinite integral using the substitution x = 4 sin 0. (Remember to use absolute values where appropriate. Use C for the constant of integration.) | 16 – x2 dx Х

Answers

To evaluate the indefinite integral ∫(16 - [tex]x^{2}[/tex]) dx using the substitution x = 4sinθ, we need to substitute x and dx in terms of θ and dθ, respectively.

Given x = 4sinθ, we can solve for θ as θ =[tex]sin^{(-1)[/tex] (x/4).

To find dx, we differentiate x = 4sinθ with respect to θ:

dx/dθ = 4cosθ

Now, we substitute x = 4sinθ and dx = 4cosθ dθ into the integral:

∫(16 - [tex]x^{2}[/tex] ) dx = ∫(16 - (4sinθ)²) (4cosθ) dθ

               = ∫(16 - 16sin²θ) (4cosθ) dθ

We can simplify the integrand using the trigonometric identity sin²θ = 1 - cos²θ:

∫(16 - 16sin²θ) (4cosθ) dθ = ∫(16 - 16(1 - cos²θ)) (4cosθ) dθ

                                   = ∫(16 - 16 + 16cos²θ) (4cosθ) dθ

                                   = ∫(16cos²θ) (4cosθ) dθ

Combining like terms, we have:

∫(16cos²θ) (4cosθ) dθ = 64∫cos³θ dθ

Now, we can use the reduction formula to integrate cos^nθ:

∫cos^nθ dθ = (1/n)cos^(n-1)θsinθ + (n-1)/n ∫cos^(n-2)θ dθ

Using the reduction formula with n = 3, we get:

∫cos³θ dθ = (1/3)cos²θsinθ + (2/3)∫cosθ dθ

Integrating cosθ, we have:

∫cosθ dθ = sinθ

Substituting back into the expression, we get:

∫cos³θ dθ = (1/3)cos²θsinθ + (2/3)sinθ + C

Finally, substituting x = 4sinθ back into the expression, we have:

∫(16 - x²) dx = (1/3)(16 - x²)sin(sin^(-1)(x/4)) + (2/3)sin(sin[tex]^{-1}[/tex](x/4)) + C

                       = (1/3)(16 - x²)(x/4) + (2/3)(x/4) + C

                       = (4/12)(16 - x²)(x) + (8/12)(x) + C

                       = (4/12)(16x - x³) + (8/12)x + C

                       = (4/12)(16x - x³ + 2x) + C

                       = (4/12)(18x - x^3) + C

                       = (1/3)(18x - x^3) + C

Therefore, the indefinite integral of (16 - x²) dx, using the substitution x = 4sinθ, is (1/3)(18x - x³ ) + C.

learn more about indefinite integral here:

https://brainly.com/question/28036871

#SPJ11

a. Find the nth-order Taylor polynomials of the given function centered at the given point a, for n = 0, 1, and 2. b. Graph the Taylor polynomials and the function. f(x)= 13 In (x), a = 1 The Taylor p

Answers

The nth-order Taylor polynomials of the function f(x) = 13ln(x) centered at a = 1, for n = 0, 1, and 2, are as follows:

a) For n = 0, the zeroth-order Taylor polynomial is simply the value of the function at the center: P0(x) = f(a) = f(1) = 13ln(1) = 0. b) For n = 1, the first-order Taylor polynomial is obtained by taking the derivative of the function and evaluating it at the center: P1(x) = f(a) + f'(a)(x - a) = f(1) + f'(1)(x - 1) = 0 + (13/x)(x - 1) = 13(x - 1). c) For n = 2, the second-order Taylor polynomial is obtained by taking the second derivative of the function and evaluating it at the center: P2(x) = f(a) + f'(a)(x - a) + (1/2)f''(a)(x - a)^2 = f(1) + f'(1)(x - 1) + (1/2)(-13/x^2)(x - 1)^2 = 13(x - 1) - (13/2)(x - 1)^2. To graph the Taylor polynomials and the function, we plot each of them on the same coordinate system. The zeroth-order Taylor polynomial P0(x) is a horizontal line at y = 0. The first-order Taylor polynomial P1(x) is a linear function with a slope of 13 and passing through the point (1, 0). The second-order Taylor polynomial P2(x) is a quadratic function. By graphing these polynomials along with the function f(x) = 13ln(x), we can visually observe how well the Taylor polynomials approximate the function near the center a = 1.

Learn more about Taylor polynomial here:

https://brainly.com/question/30481013

#SPJ11

The height, h, in metres, of a firework as a function of time, t, in seconds, is given by h(t) = -4.9t2 +98t+2. Determine the maximum height of the firework. Verify it is a maximum.

Answers

the maximum height of the firework is 492 meters, and it is indeed a maximum.

To determine the maximum height of the firework and verify that it is a maximum, we can analyze the given function h(t) = -4.9t^2 + 98t + 2.

The maximum height of the firework corresponds to the vertex of the parabolic function because the coefficient of t^2 is negative (-4.9), indicating a downward-opening parabola. The vertex of the parabola (h, t) can be found using the formula:

t = -b / (2a)

where a = -4.9 and b = 98.

t = -98 / (2 * (-4.9))

t = -98 / (-9.8)

t = 10

So, the time at which the firework reaches its maximum height is t = 10 seconds.

To find the maximum height, substitute t = 10 into the function h(t):

h(10) = -4.9(10)^2 + 98(10) + 2

h(10) = -4.9(100) + 980 + 2

h(10) = -490 + 980 + 2

h(10) = 492

Therefore, the maximum height of the firework is 492 meters.

To verify that it is a maximum, we can check the concavity of the parabolic function. Since the coefficient of t^2 is negative, the parabola opens downward. This means that the vertex represents the maximum point on the graph.

To know more about parabola visit;

brainly.com/question/29267743

#SPJ11

The market for Potion is monopolistic competitive. The market demand is shown
as follow:
P = 32 - 0.050
Suppose the total cost function for each firm in the market is:
C = 125 + 2g How many number of firms (and output for each firm) would be in the long run
equilibrium condition?

Answers

The long-run equilibrium will have five firms, and each firm will have an output of 66.67 units.

Given: The market for Potion is monopolistic competitive.

The market demand is shown as follows:P = 32 - 0.050 Suppose the total cost function for each firm in the market is:C = 125 + 2gFormula used: Long-run equilibrium condition, where MC = ATC.

The market demand is shown as follows:P = 32 - 0.050At the equilibrium level of output, MC = ATC. The firm is earning only a normal profit. Therefore, the price of the product equals the ATC. Thus, ATC = 125/g + 2.

Number of firms in the long run equilibrium can be found by using the following equation: MC = ATC = P/2The MC of the firm can be calculated as follows:

[tex]MC = dTC/dqMC = 2g[/tex]

Since the market for Potion is monopolistic competitive, the price will be greater than the MC, thus we get, P = MC + 2.5.

Substituting these values in the above equation, we get: 2g = (32 - 0.05q) / (2 + 2.5)2g = 6.4 - 0.01q50g = 12.5 - qg = 0.25 - 0.02qThus, we can calculate the number of firms in the market as follows:Number of firms = Market output / Individual firm's output

Individual firm's output is given by:q = (32 - P) / 0.05 = (32 - 2.5 - MC) / 0.05 = 590 - 40gTherefore, the number of firms in the market is:

Number of firms = (Market output / Individual firm's output)

Market output is the same as total output, which is the sum of individual firm's output. Thus,

Market output = [tex]n * q = n * (590 - 40g)n * (590 - 40g) = 1250n = 5[/tex]

Output per firm is calculated as follows: q = 590 - 40gq = 590 - 40 (0.25 - 0.02q)q = 600/9q = 66.67The long-run equilibrium will have five firms, and each firm will have an output of 66.67 units.

Learn more about equilibrium here:

https://brainly.com/question/31104772


#SPJ11

2. Let A be a 3 x 3 matrix. Assume 1 and 2 are the only eigenvalues of A. Determine whether the following statements are always true. If true, justify why. If not true, provide a counterexample. State

Answers

To determine whether the statements are always true, we need to consider the properties of eigenvalues and eigenvectors.

Statement 1: A is diagonalizable.

If A has only two distinct eigenvalues, 1 and 2, it may or may not be diagonalizable. For the statement to be true, A should have three linearly independent eigenvectors corresponding to the eigenvalues 1 and 2. If A has three linearly independent eigenvectors, it can be diagonalized by forming a diagonal matrix D with the eigenvalues on the diagonal and a matrix P with the eigenvectors as columns. Then, A = PDP^(-1).

Learn more about eigenvectors here;  

https://brainly.com/question/31043286

#SPJ11

A company manufactures 2 models of MP3 players. Let x represent the number (in millions) of the first model made, and let y represent the number (in millions) of the second model made. The company's revenue can be modeled by the equation R(x, y) = 90x+80y - 2x² - 3y² - xy Find the marginal revenue equations R₂(x, y) - R₂(x, y) - We can achieve maximum revenue when both partial derivatives are equal to zero. Set R0 and R₁ 0 and solve as a system of equations to the find the production levels that will maximize revenue. Revenue will be maximized when:

Answers

To find the production levels that will maximize revenue, we need to find the values of x and y that make both partial derivatives of the revenue function equal to zero.

Let's start by finding the partial derivatives:

Rₓ = 90 - 4x - y (partial derivative with respect to x)

Rᵧ = 80 - 6y - x (partial derivative with respect to y)

To maximize revenue, we need to set both partial derivatives equal to zero:

90 - 4x - y = 0 ...(1)

80 - 6y - x = 0 ...(2)

We now have a system of two equations with two unknowns. We can solve this system to find the values of x and y that maximize revenue.

Let's solve the system of equations:

From equation (1):

y = 90 - 4x ...(3)

Substitute equation (3) into equation (2):

80 - 6(90 - 4x) - x = 0

Simplifying the equation:

80 - 540 + 24x - x = 0

24x - x = 540 - 80

23x = 460

x = 460 / 23

x = 20

Substitute the value of x back into equation (3):

y = 90 - 4(20)

y = 90 - 80

y = 10

Therefore, the production levels that will maximize revenue are x = 20 million units for the first model and y = 10 million units for the second model.

To learn more about partial derivatives visit;

brainly.com/question/6732578

#SPJ11

Which inequality correctly orders the numbers

Answers

The inequality which correctly orders the numbers is -5 < -8/5 < 0.58.

The correct answer choice is option C.

Which inequality correctly orders the numbers?

-8/5

-5

0.58

From least to greatest

-5, -8/5, -0.58

So,

-5 < -8/5 < 0.58

The symbols of inequality are;

Greater than >

Less than <

Greater than or equal to ≥

Less than or equal to ≤

Equal to =

Hence, -5 < -8/5 < 0.58 is the inequality which represents the correct order of the numbers.

Read more on inequality:

https://brainly.com/question/25275758

#SPJ1

these are the answers: a) parallel and distinct b) coincident c)
coincident
d) coincident. thanks.
- 2. Which pairs of planes are parallel and distinct and which are coincident? a) 2x + 3y – 72 – 2 = 0 4x + 6y – 14z - 8 = 0 b) 3x +9y – 62 – 24 = 0 4x + 12y – 8z – 32 = 0 c) 4x – 12y

Answers

Let's analyze each pair:

a) 2x + 3y - 7z - 2 = 0 and 4x + 6y - 14z - 8 = 0
Divide the second equation by 2:
2x + 3y - 7z - 4 = 0
This equation differs from the first one only by the constant term, so they have the same normal vector. Therefore, these planes are parallel and distinct.

b) 3x + 9y - 6z - 24 = 0 and 4x + 12y - 8z - 32 = 0
Divide the first equation by 3:
x + 3y - 2z - 8 = 0
Divide the second equation by 4:
x + 3y - 2z - 8 = 0
These equations are identical, so the planes are coincident.

c) Unfortunately, the third pair of equations is incomplete. Please provide the complete equations to determine if they are parallel and distinct or coincident.

To know more about equation visit:

https://brainly.com/question/11624077

#SPJ11

Living room is 20. 2 meters long and it's width half the size of it's length. The difference between the length and width of her living room ?

Answers

The living room is 20.2 meters long and its width is half the size of its length, which means the width is 10.1 meters. The difference between the length and width of the living room is 10.1 meters.

Given:

Length of the living room = 20.2 meters

Width of the living room = half the size of the length

To find the width of the living room, we need to divide the length by 2:

Width = 20.2 meters / 2

Width = 10.1 meters

Now, we can calculate the difference between the length and width of the living room:

Difference = Length - Width

Difference = 20.2 meters - 10.1 meters

Difference = 10.1 meters

Therefore, the difference between the length and width of the living room is 10.1 meters.

In conclusion, the living room is 20.2 meters long and its width is half the size of its length, which means the width is 10.1 meters. The difference between the length and width of the living room is 10.1 meters.

For more questions on length

https://brainly.com/question/28108430

#SPJ8

Please use R programming to solve this question.
Consider a situation with 3 white and 5 black balls in a bag. Four balls are drawn from the bag, without
replacement. Write down every possible sample and calculate its probability.

Answers

In the given situation with 3 white and 5 black balls in a bag, we will calculate every possible sample of four balls drawn without replacement and their corresponding probabilities using R programming.

To calculate the probabilities of each possible sample, we can use combinatorial functions in R. Here is the code to generate all possible samples and their probabilities:

# Load the combinat library

library(combinat)

# Define the number of white and black balls

white_balls <- 3

black_balls <- 5

# Generate all possible samples of four balls

all_samples <- permn(c(rep("W", white_balls), rep("B", black_balls)))

# Calculate the probability of each sample

probabilities <- sapply(all_samples, function(sample) prod(table(sample)) / choose(white_balls + black_balls, 4))

# Combine the samples and probabilities into a data frame

result <- data.frame(Sample = all_samples, Probability = probabilities)

# Print the result

print(result)

Running this code will output a data frame that lists all possible samples and their corresponding probabilities. Each sample is represented by "W" for white ball and "B" for black ball. The probability is calculated by dividing the number of ways to obtain that particular sample by the total number of possible samples (which is the number of combinations of 4 balls from the total number of balls).

By executing the code, you will obtain a table showing each possible sample and its associated probability. This will provide a comprehensive overview of the probabilities for each sample in the given scenario.

Learn more about combinatorial functions  here:

https://brainly.com/question/32415345

#SPJ11







Use the method of Lagrange multipliers to find the maximum value of the f(x, y, z) = 2.C - 3y - 4z, subject to the constraint 2x² + + y2 + x2 = 16.

Answers

To find the maximum value of f(x, y, z) = 2x - 3y - 4z subject to the constraint 2x² + y² + z² = 16, we can use the method of Lagrange multipliers.  First, we define the Lagrangian function L(x, y, z, λ) as:

L(x, y, z, λ) = f(x, y, z) - λ(g(x, y, z) - 16) where g(x, y, z) is the constraint equation 2x² + y² + z² = 16 and λ is the Lagrange multiplier.

Next, we find the partial derivatives of L with respect to each variable:

∂L/∂x = 2 - 4λx

∂L/∂y = -3 - 2λy

∂L/∂z = -4 - 2λz

∂L/∂λ = g(x, y, z) - 16

Setting these partial derivatives equal to zero, we have the following equations:

2 - 4λx = 0

-3 - 2λy = 0

-4 - 2λz = 0

g(x, y, z) - 16 = 0

Learn more about Lagrangian function here: brainly.com/question/5939042

#SPJ11

Use Euler's method with step size h = 0.2 to approximate the solution to the initial value problem at the points x = 6.2, 6.4, 6.6, and 6.8. y' = (y² + y), y(6) = 2 Complete the table using Euler's m

Answers

Euler's method is used to approximate the solution to the initial value problem y' = (y² + y), y(6) = 2 at specific points. With a step size of h = 0.2, the table below provides the approximate values of y at x = 6.2, 6.4, 6.6, and 6.8.

Given the initial value problem y' = (y² + y) with y(6) = 2, we can apply Euler's method to approximate the solution at different points. Euler's method uses the formula:

y(i+1) = y(i) + h * f(x(i), y(i)),

where y(i) is the approximate value of y at x(i), h is the step size, and f(x(i), y(i)) is the derivative of y with respect to x evaluated at x(i), y(i).

Let's compute the approximate values using Euler's method with a step size of h = 0.2:

Starting with x = 6 and y = 2, we can fill in the table as follows:

|   x   |   y   |

|-------|-------|

|  6.0  |  2.0  |

|  6.2  |   -   |

|  6.4  |   -   |

|  6.6  |   -   |

|  6.8  |   -   |

To find the values at x = 6.2, 6.4, 6.6, and 6.8, we need to calculate the value of y using the formula mentioned earlier.

For x = 6.2:

f(x, y) = y² + y = 2² + 2 = 6

y(6.2) = 2 + 0.2 * 6 = 3.2

Continuing the calculations for x = 6.4, 6.6, and 6.8:

For x = 6.4:

f(x, y) = y² + y = 3.2² + 3.2 = 11.84

y(6.4) = 3.2 + 0.2 * 11.84 = 5.368

For x = 6.6:

f(x, y) = y² + y = 5.368² + 5.368 = 35.646224

y(6.6) = 5.368 + 0.2 * 35.646224 = 12.797245

For x = 6.8:

f(x, y) = y² + y = 12.797245² + 12.797245 = 165.684111

y(6.8) = 12.797245 + 0.2 * 165.684111 = 45.534318

The completed table is as follows:

|   x   |    y   |

|-------|--------|

|  6.0  |   2.0  |

|  6.2  |   3.2  |

|  6.4  |  5.368 |

|  6.6  | 12.797 |

|  6.8  | 45.534 |

Therefore, using Euler's method with a step size of h = 0.2, we have approximated the solution to the initial value problem at x = 6.2, 6.4, 6.6, and 6.8.

Learn more about Euler's method here:

brainly.com/question/30699690

#SPJ11

consider the equation ut=uxx, 00. suppose u(0,t)=0,u(1,t)=0. suppose u(x,0)=−8sin(πx)−7sin(2πx)−2sin(3πx) 2sin(4πx) fill in the constants in the solution:

Answers

The solution to the given partial differential equation, ut = uxx, with the given initial conditions can be found by applying separation of variables and using the method of Fourier series expansion. The solution will be a linear combination of sine functions with specific coefficients determined by the initial condition.

To solve the partial differential equation ut = uxx, we can assume a solution of the form u(x,t) = X(x)T(t) and substitute it into the equation. This leads to X''(x)/X(x) = T'(t)/T(t), which must be equal to a constant, say -λ².

Applying the boundary conditions u(0,t) = 0 and u(1,t) = 0, we find that X(0) = 0 and X(1) = 0. This implies that the eigenvalues λ are given by λ = nπ, where n is a positive integer.

Using separation of variables, we can write the solution as u(x,t) = ∑[An sin(nπx)e^(-n²π²t)], where An are constants to be determined.

Given the initial condition u(x,0) = -8sin(πx) - 7sin(2πx) - 2sin(3πx) + 2sin(4πx), we can expand this function in terms of sine functions and match the coefficients with the series solution. By comparing the coefficients, we can determine the values of An for each term.

By substituting the determined values of An into the solution, we obtain the complete solution to the given partial differential equation with the given initial condition.

Learn more about Fourier series here:

https://brainly.com/question/31705799

#SPJ11

solve for x 6x+33 and 45 and 28

Answers

The values of x for 45 and 28 will be 2 and -0.83.

Let the total value by 'Y'

So the given equation can be re-written as:

Y= 6x+33.....(i)

For the first value of Y=45,

We can put the values in (i) as:

45=6x+33

x=2

For the second value of Y=28,

we can put the values in (i) as:

28=6x+33

x=-0.83

Thus, the values of x are 2 and -0.83 for the two cases.

To learn more about simple equations,

https://brainly.com/question/14756252

6
h

−1=−3start fraction, h, divided by, 6, end fraction, minus, 1, equals, minus, 3
h =h=h, equals

Answers

The solution to the equation is h = -1/3.

To solve the equation:

6h - 1 = -3

We will isolate the variable h by performing algebraic operations.

Let's solve step by step:

Add 1 to both sides of the equation:

6h - 1 + 1 = -3 + 1

Simplifying:

6h = -2

Divide both sides of the equation by 6:

(6h) / 6 = (-2) / 6

Simplifying:

h = -1/3

Equation to be solved: 6h - 1 = -3

We shall use algebraic procedures to isolate the variable h.

Let's tackle this step-by-step:

To both sides of the equation, add 1:

6h - 1 + 1 = -3 + 1

Condensing: 6h = -2

Subtract 6 from both sides of the equation:

(6h) / 6 = (-2) / 6

To put it simply, h = -1/3

6h - 1 = -3 is the answer to the equation.

Algebraic procedures will be used to isolate the variable h.

Let's go through the following step-by-step problem:

Additionally, both sides of the equation are 1:

6h - 1 + 1 = -3 + 1

Simplification: 6h = -2

Divide the equation's two sides by 6:

(6h) / 6 = (-2) / 6

Condensing: h = -1/3

For similar questions on equation

https://brainly.com/question/17145398
#SPJ8

or each of the following, find two unit vectors normal to the surface at an arbitrary point on the surface. a) The plane ax + by + cz = d, where a, b, c and d are arbitrary constants and not all of a, b, c are 0. (b) The half of the ellipse x2 + 4y2 + 9z2 = 36 where z > 0. (c)z=15cos(+y2). (d) The surface parameterized by r(u, v) = (Vu2 + 1 cos (), 2Vu2 + 1 sin (), u) where is any real number and 0< < 2T.

Answers

In problem (a), we need to find two unit vectors normal to the plane defined by the equation ax + by + cz = d. In problem (b), we need to find two unit vectors normal to the upper half of the ellipse [tex]x^{2}[/tex] + 4[tex]y^{2}[/tex]+ 9[tex]z^{2}[/tex] = 36, where z > 0. In problem (c), we need to find two unit vectors normal to the surface defined by the equation z = 15cos(x + [tex]y^{2}[/tex]). In problem (d), we need to find two unit vectors normal to the surface parameterized by r(u, v) = ([tex]v^{2}[/tex] + 1)cos(u), (2[tex]v^{2}[/tex]+ 1)sin(u), u.

(a) To find two unit vectors normal to the plane ax + by + cz = d, we can use the coefficients of x, y, and z in the equation. By dividing each coefficient by the magnitude of the normal vector, we can obtain two unit vectors perpendicular to the plane.

(b) To find two unit vectors normal to the upper half of the ellipse[tex]x^{2}[/tex] + 4[tex]y^{2}[/tex]+ 9[tex]z^{2}[/tex]= 36, where z > 0, we can consider the gradient of the equation. The gradient gives the direction of maximum increase of a function, which is normal to the surface. By normalizing the gradient vector, we can obtain two unit vectors normal to the surface.

(c) To find two unit vectors normal to the surface z = 15cos(x + [tex]y^{2}[/tex], we can differentiate the equation with respect to x and y to obtain the partial derivatives. The normal vector at any point on the surface is given by the cross product of the partial derivatives, and by normalizing this vector, we can obtain two unit vectors normal to the surface.

(d) To find two unit vectors normal to the surface parameterized by r(u, v) = ([tex]v^{2}[/tex] + 1)cos(u), (2v^2 + 1)sin(u), u, we can differentiate the parameterization with respect to u and v. Taking the cross product of the partial derivatives gives the normal vector, and by normalizing this vector, we can obtain two unit vectors normal to the surface.

Note: The specific calculations and equations required to find the normal vectors may vary depending on the given equations and surfaces.

Learn more about vectors here: https://brainly.com/question/15650260

#SPJ11

hw
help
Find the derivative of the trigonometric function f(x) = 7x cos(-x). Answer 2 Points f'(x) = =

Answers

The derivative of the trigonometric function f(x) = 7x cos(-x) can be found using the product rule and the chain rule.

The product rule states that the derivative of the product of two functions is equal to the derivative of the first function multiplied by the second function, plus the first function multiplied by the derivative of the second function. In this case, let's consider the functions u(x) = 7x and v(x) = cos(-x). Taking the derivatives of these functions, we have u'(x) = 7 and v'(x) = -sin(-x) * (-1) = sin(x).

Applying the product rule, we can find the derivative of f(x):

f'(x) = u'(x) * v(x) + u(x) * v'(x)

= 7 * cos(-x) + 7x * sin(x)

Simplifying the expression, we have: f'(x) = 7cos(-x) + 7xsin(x)

Therefore, the derivative of the trigonometric function f(x) = 7x cos(-x) is f'(x) = 7cos(-x) + 7xsin(x).

Learn more about chain rule here: https://brainly.com/question/31296489

#SPJ11

Q3
3) Given the function f (x, y) = y sin x + e* cos y, determine a) fx b) fy c) fax d) fug e) fry

Answers

From the given function we can determined :

a) fx = y cos(x) + e^x cos(y)

b) fy = sin(x) - e^x sin(y)

c) fax = -y sin(x) + e^x cos(y)

d) fug = cos(x) - e^x sin(y)

e) fry = -e^x cos(y)

To find the partial derivatives of the function f(x, y) = y sin(x) + e^x cos(y), we differentiate with respect to x and y using the appropriate rules:

a) fx: To find the partial derivative of f with respect to x (fx), we differentiate y sin(x) + e^x cos(y) with respect to x, treating y as a constant.

fx = d/dx (y sin(x)) + d/dx (e^x cos(y))

Since y is treated as a constant with respect to x, the derivative of y sin(x) with respect to x is simply y cos(x):

fx = y cos(x) + d/dx (e^x cos(y))

The derivative of e^x cos(y) with respect to x is e^x cos(y) since cos(y) is treated as a constant with respect to x:

fx = y cos(x) + e^x cos(y)

b) fy: To find the partial derivative of f with respect to y (fy), we differentiate y sin(x) + e^x cos(y) with respect to y, treating x as a constant.

fy = d/dy (y sin(x)) + d/dy (e^x cos(y))

Since x is treated as a constant with respect to y, the derivative of y sin(x) with respect to y is simply sin(x):

fy = sin(x) + d/dy (e^x cos(y))

The derivative of e^x cos(y) with respect to y is -e^x sin(y) since cos(y) is treated as a constant with respect to y:

fy = sin(x) - e^x sin(y)

c) fax: To find the partial derivative of fx with respect to x (fax), we differentiate fx = y cos(x) + e^x cos(y) with respect to x.

fax = d/dx (y cos(x) + e^x cos(y))

Differentiating y cos(x) with respect to x, we get -y sin(x):

fax = -y sin(x) + d/dx (e^x cos(y))

The derivative of e^x cos(y) with respect to x is e^x cos(y):

fax = -y sin(x) + e^x cos(y)

d) fug: To find the partial derivative of fx with respect to y (fug), we differentiate fx = y cos(x) + e^x cos(y) with respect to y.

fug = d/dy (y cos(x) + e^x cos(y))

Differentiating y cos(x) with respect to y, we get cos(x):

fug = cos(x) + d/dy (e^x cos(y))

The derivative of e^x cos(y) with respect to y is -e^x sin(y):

fug = cos(x) - e^x sin(y)

e) fry: To find the partial derivative of fy with respect to y (fry), we differentiate fy = sin(x) - e^x sin(y) with respect to y.

fry = d/dy (sin(x) - e^x sin(y))

The derivative of sin(x) with respect to y is 0 since sin(x) is treated as a constant with respect to y:

fry = 0 - d/dy (e^x sin(y))

The derivative of e^x sin(y) with respect to y is e^x cos(y):

fry = -e^x cos(y)

To practice more questions on partial derivatives:

brainly.com/question/28751547

#SPJ11








(5 pts) Find the open intervals where the function is increasing and decreasing. 10) f(x) = 0.25x2.0.5% (6 pts) Find all intervals where the function is concave upward or downward, and find all inflec

Answers

The answer are:

1.The function is increasing for all positive values of x.

2.The function is decreasing for all negative values of x.

3.The function is concave downward for all positive values of x.

4.The function is concave upward for all negative values of x.

5.The function does not have any inflection points.

What is the nature of a function?

The nature of a function refers to the characteristics and behavior of the function, such as whether it is increasing or decreasing, concave upward or downward, or whether it has any critical points or inflection points. Understanding the nature of a function provides insights into its overall shape and how it behaves over its domain.

To determine the open intervals where the function [tex]f(x)=0.25x^{0.5}[/tex] is increasing or decreasing, as well as the intervals where it is concave upward or downward, we need to analyze its first and second derivatives.

Let's begin by finding the first derivative of f(x):

[tex]f'(x)=\frac{d}{dx}(0.25x^{0.5})[/tex]

Using the power rule of differentiation, we have:

[tex]f'(x)=(0.5)(0.25)(x^{-0.5})[/tex]

Simplifying further:

[tex]f'(x)=0.125x^{-0.5}[/tex]

Next, we can find the second derivative by taking the derivative of f′(x):

[tex]f"(x)=\frac{d}{dx}(0.125x^{-0.5})[/tex]

Again using the power rule, we get:

[tex]f"(x)=(-0.125)(0.5)(x^{-1.5})[/tex]

Simplifying:

[tex]f"(x)=(-0.0625)(x^{-1.5})[/tex]

Now, let's analyze the results:

1.Increasing and Decreasing Intervals:

To determine where the function is increasing or decreasing, we need to examine the sign of the first derivative ,f′(x).

Since [tex]f'(x)=0.125x^{-0.5}[/tex], we observe that f′(x) is always positive for positive values of x and always negative for negative values of x. Therefore, the function is always increasing for positive x and always decreasing for negative x.

2.Concave Upward and Concave Downward Intervals:

To determine the intervals where the function is concave upward or downward, we need to examine the sign of the second derivative ,f′′(x).

Since [tex]f"(x)=-0.0625x^{-1.5}[/tex], we observe that f′′(x) is always negative for positive values of x and always positive for negative values of x. Therefore, the function is concave downward for positive x and concave upward for negative x.

3.Inflection Points:

Inflection points occur where the concavity of the function changes. In this case, the function [tex]f(x)=0.25x^{0.5}[/tex] does not have any inflection points since the concavity remains constant (concave downward for positive x and concave upward for negative x).

Therefore,

The function is increasing for all positive values of x.The function is decreasing for all negative values of x.The function is concave downward for all positive values of x.The function is concave upward for all negative values of x.The function does not have any inflection points.

Question: Find the open intervals where the function is increasing and decreasing .The function is [tex]f(x)=0.25x^{0.5}[/tex].Find all intervals where the function is concave upward or downward, and find all inflection points.

To learn more about the nature of a function from the given link

brainly.com/question/30772392

#SPJ4

Find all values of the constant for which y=eis a solution to the equation 3y+ - 20 (19) Find all values of the constants A and B for which y - Ax + B is a solution to the equation y- 4y +y

Answers

There are no values of the constant for which y = eˣ is a solution to the equation 3y'' - 20y = 0.

to find the values of the constant for which y=eˣ is a solution to the equation 3y'' - 20y = 0, we need to substitute y = eˣ into the equation and solve for the constant.

let's start by finding the first and second derivatives of y = eˣ:y' = eˣ

y'' = eˣ

now substitute these derivatives into the equation:3y'' - 20y = 3(eˣ) - 20(eˣ) = (3 - 20)eˣ = -17eˣ

since y = eˣ is a solution to the equation, we have -17eˣ = 0. this equation holds only if eˣ = 0, but eˣ is never equal to 0 for any value of x. next, let's find the values of the constants a and b for which y = ax + b is a solution to the equation y'' - 4y' + y = 0.

first, we find the first and second derivatives of y = ax + b:

y' = ay'' = 0

now substitute these derivatives into the equation:

y'' - 4y' + y = 00 - 4a + ax + b = 0

matching the coefficients of the terms with corresponding powers of x:

a = 4ab = -4a

from the first equation, we have a = 0, which means a can be any value.

substituting a = 0 into the second equation, we get b = 0.

Learn more about Derivative here:

https://brainly.com/question/29020856

#SPJ11

Problem 2. (15 pts) Find an equation relating the real numbers a, b, and c so that the linear system
x + 2y −3z = a
2x + 3y + 3z = b
5x + 9y −6z = c
is consistent (i.e., has at least one solution) for any values of a, b, and c satisfying that equation.

Answers

There is no real number solution to this equation. Therefore, it is not possible to find an equation relating a, b, and c that guarantees the given linear system to be consistent for any values of a, b, and c.

To ensure that the given linear system is consistent for any values of a, b, and c, we need to find an equation that guarantees the existence of a solution.

This can be achieved by setting up a condition on the coefficients of the system such that the determinant of the coefficient matrix is zero.

Let's consider the coefficient matrix A:

A = [[1, 2, -3],

[2, 3, 3],

[5, 9, -6]]

We want to find an equation relating a, b, and c such that the determinant of A is zero.

det(A) = 0

Using the properties of determinants, we can expand the determinant along the first row:

det(A) = 1 * det([[3, 3], [9, -6]]) - 2 * det([[2, 3], [5, -6]]) + (-3) * det([[2, 3], [5, 9]])

Simplifying further, we have:

det(A) = 1 * (3*(-6) - 39) - 2 * (2(-6) - 35) + (-3) * (29 - 3*5)

det(A) = -54 + 2*(-12) - 3*3

det(A) = -54 - 24 - 9

det(A) = -87

Setting the determinant equal to zero, we get:

-87 = 0

However, there is no real number solution to this equation. Therefore, it is not possible to find an equation relating a, b, and c that guarantees the given linear system to be consistent for any values of a, b, and c.

To learn more about linear system visit:

brainly.com/question/31676374

#SPJ11

Whats the snow's depth at time t=5hours?
Snow is piling on a driveway so its depth is changing at a rate of r(t) = 10/1 - cos(0.5t) centimeters per hour, where t is the time in hours, 0

Answers

Given that the rate at which snow is piling on a driveway is r(t) = 10/(1-cos(0.5t)) cm per hour and the initial depth of the snow is zero. Approximately, the snow's depth at time t = 5 hours is 23.2 cm.

Therefore, we have to integrate the rate of change of depth with respect to time to obtain the depth of the snow at a given time t.

To integrate r(t), we will let u = 0.5t

so that du/dt = 0.5.

Therefore, dt = 2du.

Substituting this into r(t), we obtain; r(t) = 10/(1-cos(0.5t))= 10/(1-cosu)

∵ t = 2uThen, using substitution,

we can solve for the indefinite integral of r(t) as follows: ∫10/(1-cosu)du

= -10∫(1+cosu)/(1-cos^2u)du

= -10∫(1+cosu)/sin^2udu

= -10∫cosec^2udu - 10∫cotucosecu du

= -10(-cosec u) - 10ln|sinu| + C

∵ C is a constant of integration To evaluate the definite integral, we substitute the limits of integration as follows:

[u = 0, u = t/2]

∴ ∫[0,t/2] 10/(1-cos(0.5t))dt

= -10(-cosec(t/2) - ln |sin(t/2)| + C)At t = 5;

Snow's depth at t = 5 hours = -10(-cosec(5/2) - ln |sin(5/2)| + C)Depth of snow = 23.2 cm (correct to one decimal place)

Approximately, the snow's depth at time t = 5 hours is 23.2 cm.

To know more about integral

https://brainly.com/question/30094386

#SPJ11

From a boat on the lake, the angle of elevation to the top of the cliff is 25. 24. If the base of the cliff is 1183 feet from the boat, how high is the cliff

Answers

If the base of the cliff is 1183 feet from the boat, the height of the cliff is approximately 550.5 feet.

Let's denote the height of the cliff as h feet.

Given that the angle of elevation to the top of the cliff is 25.24° and the base of the cliff is 1183 feet from the boat, we can use the tangent function:

tangent(angle) = opposite/adjacent

In this case, the opposite side is the height of the cliff (h), and the adjacent side is the distance from the boat to the base of the cliff (1183).

Using the tangent function, we have:

tangent(25.24°) = h/1183

Rearranging the equation to solve for h, we have:

h = 1183 * tangent(25.24°)

Calculating this expression, we find:

h ≈ 1183 * 0.4655

h ≈ 550.5005

Learn more about height here:

https://brainly.com/question/27243378

#SPJ11

Use the Integral Test to determine whether the infinite series is convergent. n? 3 2 n=15 (n3 + 4) To perform the integral test, one should calculate the improper integral SI dx Enter inf for oo, -inf for -o, and DNE if the limit does not exist. By the Integral Test, the infinite series 22 3 3 NC n=15 (nở + 4)

Answers

By the Integral Test, the infinite series Σ((n^3 + 4)/n^2) from n = 15 to infinity converges.

To determine the convergence of the infinite series Σ((n^3 + 4)/n^2) from n = 15 to infinity, we can apply the Integral Test by comparing it to the corresponding improper integral.

The integral test states that if a function f(x) is positive, continuous, and decreasing on the interval [a, ∞), and the series Σf(n) is equivalent to the improper integral ∫[a, ∞] f(x) dx, then both the series and the integral either both converge or both diverge.

In this case, we have f(n) = (n^3 + 4)/n^2. Let's calculate the improper integral:

∫[15, ∞] (n^3 + 4)/n^2 dx

To simplify the integral, we divide the integrand into two separate terms:

∫[15, ∞] n^3/n^2 dx + ∫[15, ∞] 4/n^2 dx

Simplifying further:

∫[15, ∞] n dx + 4∫[15, ∞] n^(-2) dx

The first term, ∫[15, ∞] n dx, is a convergent integral since it evaluates to infinity as the upper limit approaches infinity.

The second term, 4∫[15, ∞] n^(-2) dx, is also a convergent integral since it evaluates to 4/n evaluated from 15 to infinity, which gives 4/15.

Since both terms of the improper integral are convergent, we can conclude that the corresponding series Σ((n^3 + 4)/n^2) from n = 15 to infinity also converges.

Therefore, by the Integral Test, the infinite series Σ((n^3 + 4)/n^2) from n = 15 to infinity converges.

Learn more about integral test here, https://brainly.com/question/31381575

#SPJ11


.Correlations each vector function with its respective graph
A. r(t)-(-+ + 1)i + (4 + 2)j + (2+ + 3)k B. 0.6. (2.-21 (1,2,3) r(t) = 2 cos ti + 2 sentj + tk II. C. r(t) - (1,12,329) III. D. (2.4.5) r(t) = 2 sen ti + 2 cos tj + e-k IV.

Answers

Each vector function has a unique graph that corresponds to its equation. These graphs help visualize the behavior and movement of the vectors in three-dimensional space.

A. The vector function r(t) = (-1 + t)i + (4 + 2t)j + (2 + t)k represents a straight line in three-dimensional space. The graph of this function would be a line that starts at the point (-1, 4, 2) and moves in the direction of the vector (1, 2, 1).

B. The vector function r(t) = (2cos(t))i + (2sin(t))j + tk represents a helix in three-dimensional space. The graph of this function would be a spiral that rotates around the z-axis, starting at the point (2, 0, 0).

C. The vector function r(t) = (1, 12, 3t) represents a line in three-dimensional space. The graph of this function would be a line that starts at the point (1, 12, 0) and moves in the direction of the z-axis.

D. The vector function r(t) = (2sin(t))i + (2cos(t))j + [tex]e^(-t)[/tex]k represents a curve in three-dimensional space. The graph of this function would be a curve that oscillates in the x-y plane while exponentially decaying along the z-axis.

Learn more about graphs here:

https://brainly.com/question/17267403

#SPJ11




(20 pts total – 4 pts each) Let A(x) = S f (t)dt and B(x) = * f (t)dt, where f(x) is defined = = in the figure below. y 2 y = f(x) 1 0 1 2 3 4 5 6 -1 -2+
a. Find A(4) and B(0). b. Find the absolut

Answers

a. A(4) and B(0) are determined for the given functions A(x) and B(x) defined in the figure.

b. The absolute maximum and minimum values of the function f(x) are found.

a. To find A(4), we need to evaluate the integral of f(t) with respect to t over the interval [0, 4]. From the figure, we can see that the function f(x) is equal to 1 in the interval [0, 4]. Therefore, A(4) = ∫[0, 4] f(t) dt = ∫[0, 4] 1 dt = [t] from 0 to 4 = 4 - 0 = 4.

Similarly, to find B(0), we need to evaluate the integral of f(t) with respect to t over the interval [0, 0]. Since the interval has no width, the integral evaluates to 0. Hence, B(0) = ∫[0, 0] f(t) dt = 0.

b. To find the absolute maximum and minimum values of the function f(x), we examine the values of f(x) within the given interval. From the figure, we can see that the maximum value of f(x) is 2, which occurs at x = 4. The minimum value of f(x) is -2, which occurs at x = 2. Therefore, the absolute maximum value of f(x) is 2, and the absolute minimum value of f(x) is -2.

Learn more about function here:

https://brainly.com/question/30721594

#SPJ11

3. To find the surface area of the part of the paraboloid
z=9−x2−y2 above the plane z=5 , what would be the projection region
(region of integration) on the xy-plane?
4. Finding the surface area Question 3 1 pts = To find the surface area of the part of the paraboloid z = 9 – x2 - y2 above the plane z= 5, what would be the projection region (region of integration) on the xy-plane? A disk of

Answers

The projection region on the xy-plane for the part of the paraboloid [tex]z = 9 - x^2 - y^2[/tex] above the plane z = 5 is a disk.

To understand why the projection region is a disk, we need to consider the equations of the surfaces involved. The equation z = 5 represents a horizontal plane parallel to the xy-plane, located at a height of 5 units above the origin.

The equation of the paraboloid, [tex]z = 9 - x^2 - y^2[/tex], represents an upward-opening parabolic surface centered at the origin. The region of interest is the part of the paraboloid that lies above the plane z = 5.

To determine the projection region on the xy-plane, we set z = 5 in the equation of the paraboloid:

[tex]5 = 9 - x^2 - y^2[/tex]

Rearranging the equation, we have:

[tex]x^2 + y^2 = 4[/tex]

This equation represents a circle centered at the origin with a radius of 2 units. Therefore, the projection region on the xy-plane is a disk of radius 2 units.

Learn more about paraboloid, below:

https://brainly.com/question/30882626

#SPJ11








Find the function y passing through the point (O.) with the given ifferential equation Use a graphing to graph the solution 10 10 -10 0 10

Answers

To find the function y that satisfies the given differential equation and passes through the point (O), we need more specific information about the differential equation itself.

The differential equation represents the relationship between the function y and its derivative. Without the specific form of the differential equation, it is not possible to provide an explicit solution.

Once the differential equation is provided, we can solve it to find the general solution that includes an arbitrary constant. To determine the value of this constant and obtain the particular solution passing through the point (O), we can substitute the coordinates of the point into the general solution. This process allows us to determine the specific function y that satisfies the given differential equation and passes through the point (O).

Graphing the solution involves plotting the function y obtained from solving the differential equation along with the given point (O). The graph will demonstrate how the function y varies with different values of the independent variable, typically represented on the x-axis. The graphing process helps visualize the behavior of the function and how it relates to the given differential equation.

Learn more about arbitrary constant here: brainly.com/question/29093928

#SPJ11

Other Questions
the strength of an electromagnet is primarily proportional to its sustainable development through technology cooperation is best illustrated by:The Paris agreement which aims to limit the rise of the average global temperature. Microsoft provided the Jane Goodal Institute with animal tracking tools. A Swiss company selling agricultural chemicals agreed to global sustainable development goals. Salesforce installed its own water recycling system when implementing an hr strategy, the organization must hold some individual accountable for achieving the goals. true false which statement does not apply to the bayreuth festival theater Consider the function f(x) = 5x + 2.0-1. For this function there are four important intervals: (-0,A),(A,B),(B,C), and (Co) where A, and are the critical numbers and the function is not defined at B F 1. Find k such that f(x) = kx is a probability density function over the interval (0,2). Then find the probability density function. a diagnostic colonoscopy (45378) and a diagnostic egd (43235) were performed on the same patient by the same physician on the same day during separate sessions. how are these procedures reported? write a program to ask 10 numbers and find out total even and odd numbers Which of the following conclusions might be drawn from the textbook's discussion of feeding disorders? Rumination disorder is an evolutionary ancient behavior left over from when food was more fibrous and more chewing was required. Pica is seen most often in adult males in stressful situations. Food texture problems can be an early sign of autism. Food preferences based on taste and texture are normal, especially in childhood. the timing of changes to locomotor adaptations, brain size, and canine size in hominins follows a pattern best described as: Given that your cos wave has a period of 3/4, what is the valueof b? 4. An object moves along a straight line so that in t seconds its position is sinet 3+cost Find the object's velocity at timet (3 marks) SE Select the American poets who write about God-centered faith...a. Audenb. Bryantc. Eliotd. Longfellowe. Whitman a flagpole, 12 m high is supported by a guy rope 25m long. Findthe angle the rope makes with the ground.Calculate the sine angle A. Customers at a large department store rated their satisfaction with their purchases, on a scale from 1 (least satisfied) to 10 (most satisfied). The cost of their purchases was also recorded. To three decimal places, determine the correlation coefficient between rating and purchase amount spent. Then describe the strength and direction of the relationship.Rating,x 6 8 2 9 1 5Amount Spent, y $90 $83 $42 $110 $27 $31show all work Juan lives in San Juan and commutes daily to work at the AMA or on the urban train.He uses the AMA 70% of the time and 30% of the time he takes the commuter train.When he goes to the AMA, he is on time for work 60% of the time.When he takes the commuter train, he gets to work on time 90% of the time.a. What is the probability that he will arrive at work on time?Round to 2 decimal placesHint: Tree Diagramb. What is the probability that he took the train given that he arrived on time?Round to 3 decimal places which of the following problems can faulty electrical equipment causea. Shock. b. Fire. c. Explosion. d. All of the above. Find the values of c such that the area of the region bounded by the parabolas y 16x2-c and y--16x is 144. (Enter your answers as a comma-separated list.) C.= Submit Answer Find anequation for the ellipse described:Vertices at (2, 5) & (2, -1); c = 2 malaria is a deadly disease caused by a one-celled organism (a protist) known as plasmodium falciparum. this protist makes its way to the human liver where it reproduces and spreads to other parts of the body. what term describes this protist?