A 55.0-kg woman cheats on her diet and eats a 540 Calorie ( 540 kcal ) jelly doughnut for breakfast. (c) If the human body is only 25.0% efficient in converting chemical potential energy to mechanical energy, how many steps must the woman climb to work off her breakfast?

The electric field at a distance of 7.00 cm is 8.60×10^−2C/m2

The charge per unit area of wall is

σ = (8.60×10^−6C/cm2)( 100cm /m)^2 = 8.60×10^−2C/m2

The electric field at a distance of 2.00 cm is then

E =  σ /7∈0  = (8.60×10^−2C/m^2) / 7(8.85×10−12C2/N⋅m2)

= 1.38×10^9N/C away from the wall.

Electric field, an electric property associated with each point in space when the charge is present in any form. The magnitude and direction of the electric field are expressed by the value of E, called electric field strength or electric field intensity or simply the electric field.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ4

Answer:

net force= -50N +70N

=20N

Explanation:

The balls are moving in opposite directions as indicated and to the right is (-) while to left is (+). Therefore net force is equal to sum of the force

The cue ball travels to the left with a force of +70 N and collides with the four-ball moving towards the right with a force of -50 N.

A push or a pull that alters or tends to alter an object's uniform motion or state of rest, as well as altering an object's direction or shape, is referred to as force. It either accelerates items or increases the pressure they are under. The interaction between two items is, to put it simply, a push or a pull on the object. It is the fundamental driver of motion starting from stillness.

Given information according to the question,

The cue ball travels to the left with a force of +70 N and,

The force by four balls moving to the right is -50 N.

Net force, N = 70 N - 50 N

N = 20 N towards the left direction.

To know more about Force :

https://brainly.com/question/13191643

#SPJ2

Part A: Since the magnetic field is proportional to the number of turns per length (n), it follows that the magnetic field within the solenoid stays constant when both the number of turns and the length are doubled.

Answer C for portion B) is accurate; there are still the same number of turns per length.

A solenoid, to put it simply, transforms electrical energy into mechanical work. Many turns of tightly wound copper wire make up the coil. A powerful magnetic field or flux is produced when an electrical current passes through this wire.

Many turns of tightly wound copper wire make up the coil. A powerful magnetic field or flux is produced when an electrical current passes through this wire.

The housing, which is often composed of iron or steel, encloses the coil and concentrates the magnetic field it produces.

By concentrating the magnetic field, which generates the necessary mechanical force, the plunger is drawn to the stop.

To learn more about function of a solenoid visit:

https://brainly.com/question/21842920

#SPJ4

Answer:

true

Explanation:

correct me if i'm wrong

Answer:

False

Explanation:

A convenient definition of temperature is that it is a measure of the average translation kinetic energy associated with the disordered microscopic motion of atoms and molecules. The flow of heat is from a high temperature region towards a lower temperature region.What is the microscopic energy?

Microscopic Energy. This energy is defined as the energy associated with the random, disordered motion of molecules and due to intermolecular forces.Is temperature a direct measure of the amount of energy in an object?

Temperature is a direct measurement of thermal energy, meaning that the hotter an object is, the more thermal energy it has. Heat is a measure of how much thermal energy is transferred between two systems. It is easy to turn mechanical energy into thermal energy, for example using friction.

The tension in the cord is 4.6 N

According to Newton's second law, an object's acceleration is determined by two factors: the net force acting on the object and the mass of the object.

So, if we chose the positive +x uphill for the FedEx box of mass m2= 1.0 kg and +ve axis for m1 = 3.0 kg such that their accelerations have the same magnitude.

As we apply Newton's second law to each box, we discover that:

[tex]\mathbf{F - T -m_2gsin\theta = m_2a}[/tex]

where;

Thus, the first equation can be rewritten as:

[tex]\mathbf{F-m_2gsin\theta = (m_1+m_2)a}[/tex]

Now, the acceleration moving in the same direction can be computed as:

[tex]\mathbf{a=\dfrac{12N (1.0 kg)(9.8 \ m/s^2)sin 37^0}{(1.0+3.0)kg}}[/tex]

a = 1.53 m/s²

Finally, the tension [tex]\mathbf{T=m_1a}[/tex] = (3.0 kg) (1.53 m/s²)

= 4.6 N

Learn more about Newton's second law here:

https://brainly.com/question/18026805

#SPJ1

Answer:

5000N

Explanation:

Force is given by the formula F = ma where m is the mass and a the acceleration

Plugging in given values of m and a gives us

F = 1000 kg x 5 m/s² = 5000 Newtons or simply 5000N

Answer:

1.2 m/s

Explanation:

You must divide the distance by time in order to find velocity! 50/45. He was going 1.2 m/s!

Answer: 34

Explanation:

A box is at rest on an inclined surface. The last diagram correctly illustrates all forces, including any component force, therefore the correct option is D.

When two physical objects' surfaces come into contact, a force called friction acts to hinder or resist the relative motion of the items. Any two surfaces of things cannot simply slide over or across one another due to the friction force. It depends on the amount of force used on the object.

Additionally, there should be no net vertical forces acting on the inclined block. Fv=0

Therefore, the appropriate diagram is D.

Learn more about force on:

https://brainly.com/question/15624880

#SPJ1

A box is at rest on an inclined surface. Which diagram correctly illustrates all forces, including any component forces?

Assume the x-axis is parallel to the surface.

The emf induced in the coil as a function of time is 2.2 mV.

The emf induced in the coil is calculated as follows;

emf = NAdB/dt

where;

A is area of the coil, A = πr² = π(2.7 x 10⁻³)² = 2.29 x 10⁻⁵ m².

dB/dt = 3.2cos(1046π) = 3.2

emf = (30 x 2.29 x 10⁻⁵ x 3.2) = 2.2 x 10⁻³ V

emf = 2.2 mV

Thus, the emf induced in the coil as a function of time is 2.2 mV.

Learn more about induced emf here: https://brainly.com/question/13744192

#SPJ1

Speed of light in terms of astronomical unit is 0.12AU/min.

The astronomical unit (symbol: au, or AU) is a measurement of length that is approximately 150 million kilometers (93 million miles) or 8.3 light minutes long, representing the distance between the Earth and the Sun. As Earth orbits the Sun, its actual distance from the Sun changes by roughly 3%, going from its greatest value (aphelion) to its smallest value (perihelion), and back again, once a year. Originally intended to represent the average of Earth's aphelion and perihelion, the astronomical unit has been precisely defined as 149597870700 m since 2012. The astronomical unit is mostly used to calculate distances within or around other stars and other solar systems. It is also a crucial element in the definition of the parsec, another astronomical measure of length.

To know more about astronomical unit, visit:

https://brainly.com/question/8590563

#SPJ4

Answer:

Hope my answer is understandable to you.

The car that would have the acceleration of 3m/s^2 would be of mass 4 kg.

To know more about Force and acceleration visit:

https://brainly.com/question/1046166?

#SPJ4

The tank that has a volume of 46575 m³ with a concentration of 65 mg/l has a total mass of mercury of: 3027.375 kg

To solve this problem the formulas and the procedures that we have to use are:

Where

Information about the problem:

Using the volume formula we get:

v=  long * wide * deep

v(solution) =  115 m * 45 m * 9 m

v(solution) = 46575 m³

By converting the volume units from m³ to liters we have:

v(solution) = 46575 m³ * 1000 l/1m³

v(solution) = 43.575*10^6 l

Applying the concentration formula and clearing the mass we get:

c= m(solute)/v(solution)

m(solute) = c * v(solution)

m(mercury) = 65 mg (mercury)/l (solution)  * 43.575*10^6 l (solution)

m(mercury) = 3.027375*10^9 mg

By converting the mass units from (mg) to (kg) we have:

m(mercury) = 3.027375*10^9 mg * 1 kg/ 1 * 10^6 mg

m(mercury) = 3027.375 kg

In chemistry a solution is known as a homogeneous mixture of two or more components called:

Learn more about chemical solution at: brainly.com/question/13182946 and brainly.com/question/25326161

#SPJ4

Answer:

Im not sure if this is correct but it might be 15.3

Explanation:

8.5kg multiplied by 1.8 m/s is 15.3

Answer:

KE = 13.77 J

Explanation:

KE=1/2 mv^2

The intensity delivered to the eardrum is [tex]3.0 \times {10^{ - 8}}\,W/{m^2}$[/tex].

The area is measured on a plane perpendicular to the direction of the energy's transmission, and the power transferred per unit area is known in physics as the intensity or flux of radiant radiation. The SI system's fundamental units are watts per square meter. The average power transmission across the course of a wave, such as sound waves or electromagnetic waves like light or radio waves, is referred to as the "intensity" of the wave. The term "intensity" can be used to characterize a wide range of energy exchange scenarios. For example, one may calculate the amount of kinetic energy that each drop of water from a sprinkler is carrying. It is possible to determine intensity using the energy density.

Calculations:

[tex]${\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_1}}}{{{I_0}}}} \right)$ and ${\beta _2} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}}} \right)$$ = {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}}} \right) - 10{\log _{10}}\left( {\dfrac{{{I_1}}}{{{I_0}}}} \right)$[/tex][tex]$ \ {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}} \times \dfrac{{{I_0}}}{{{I_1}}}} \right)$ [Using $\log a - \log b = \log \left( {\dfrac{a}{b}} \right)$][/tex]

[tex]$ \arrow = {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_1}}}} \right)$\[ \arrow = \dfrac{{{\beta _2} - {\beta _1}}}{{10}} = {\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_1}}}} \right)\][/tex]

[tex]\[ \arrow ={10^{\dfrac{{{\beta _2} - {\beta _1}}}{{10}}}} = \dfrac{{{I_2}}}{{{I_1}}}\]\[ \arrow ={I_2} = {I_1}{10^{\dfrac{{{\beta _2} - {\beta _1}}}{{10}}}}\]Thus, we have ${I_2} = 3.0 \times {10^{ - 11}}\,W/{m^2} \times {10^{\dfrac{{30.0}}{{10}}}}$$ \arrow= {I_2} = 3.0 \times {10^{ - 11}} \times {10^3}\,W/{m^2}$$ \arrow ={I_2} = 3.0 \times {10^{ - 8}}\,W/{m^2}$[/tex]

To learn more about intensity ,visit:

https://brainly.com/question/17583145

#SPJ4

The wavelength of initial node is 2.34m.

The wavelength, which in physics refers to the length over which a periodic wave repeats, is its spatial period. It is the distance between two successive corresponding wave points of the same phase, such as two neighboring crests, troughs, or zero crossings, and it is a feature of both traveling waves and standing waves, as well as other spatial wave patterns. The spatial frequency is defined as the wavelength's inverse. Greek letter lambda, which means "wavelength," is frequently used to denote it. Sometimes, modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids are all referred to by the term wavelength.

Wave lengthλ=[tex]\frac{v}{f} = \frac{343 m/g}{146.6/g} =2.34m[/tex].

To learn more about wavelength,visit:

https://brainly.com/question/4112024

#SPJ4

The acceleration of the ball while it is in contact with the wall is 4036.023 m/s²

ball strikes the wall at a speed of 17.9m/sec

after striking its goes in opposite direction with a speed of 16.0026m/sec

We have given that speed towards the wall is positive

So, u = 17.9m/sec

v = -16.0026m/sec

t = 0.0084 sec

We know that acceleration is given by

a = v-u/t

where

v = final speed

u = initial speed

t = time taken

a = v-u/t

a = 17.9 - (-16.0026) / 0.0084

a = 33.9026 / 0.0084

a = 4036.023 m/s²

So the acceleration of the ball while it is in contact with the wall is 4036.023 m/s²

To know more about acceleration

https://brainly.com/question/13390099

#SPJ1

The force that gravitation exerts upon a body, equal to the mass of the body times the local acceleration of gravity is known as weight.

Weight is the force of gravity acting on a body.

The formula is :

                                W =mg

Here,

W is the weight or force acting on the body. m is the mass of the body, and g is the gravitational acceleration.

Since weight is also a force, so its SI unit is also newton. The value of weight varies from place to place depending on the gravity. Its value can also be equal to zero.

If you need to learn about the difference between mass and weight, click here

https://brainly.com/question/23876249?referrer=searchResults

#SPJ4

The total resistance of the RLC series circuit is determined as 20 ohms.

The total resistance of the RLC series circuit is calculated as follows;

R = Vrms / Irms

where;

Substitute the given parameters and solve for the total resistance

R = (180) / (9)

R = 20 ohms

Thus, the total resistance of the RLC series circuit is determined as 20 ohms.

Learn more about total resistance of RLC circuit here: https://brainly.com/question/27387167

#SPJ1

Explanation:

Endothermic reaction as heat from the environment is absorbed.

the transformation from solid to liquid is due to the latent heat of fusion/ enthalpy of fusion.

the heat energy absorbed from the environment is used to break the bonds of the solid structure therein converting it to a liquid. this is the reason why the temperature of the substance is constant at the state changes.

The frequency of oscillation is [tex]\frac{1}{2\pi } \sqrt{\frac{\mu B}{I} }[/tex].

The magnetic moment is the magnetism of a magnet or other item that creates a magnetic field, as well as its orientation and strength. Electromagnets, permanent magnets, elementary particles like electrons, different compounds, and a variety of celestial objects are examples of things that have magnetic moments (such as many planets, some moons, stars, etc). The phrase "magnetic moment" typically refers to a system's magnetic dipole moment, which can be represented by an analogous magnetic dipole, which has a magnetic north and south pole that are barely separated from one another. For sufficiently small magnets or at sufficiently wide distances, the magnetic dipole component is adequate. For extended objects, additional terms may be required in addition to the dipole moment, such as the magnetic quadrupole moment.

[tex]T = \frac{ Id^{2}\theta }{dt^{2} }[/tex]

[tex]-\mu B\theta=\frac{ Id^{2}\theta }{dt^{2} }[/tex]

[tex]\frac{d^{2}\theta }{dt^{2} } = -(\frac{\mu BI}{\theta} )[/tex]

By Comparing the above equation with the SHM equation

[tex]\frac{d^2 \theta} {dt^{2} } = -\omega^{2} \theta[/tex]

[tex]\omega^{2} =\frac{ \mu B}{I}[/tex]

Frequency = [tex]\frac{\mu}{2\pi }[/tex]

=[tex]\frac{\sqrt{\frac{\mu B}{I} } }{2\pi}[/tex]

=[tex]\frac{1}{2\pi } \sqrt{\frac{\mu B}{I} }[/tex]

To learn more about a magnetic moment, visit:

brainly.com/question/17000031

#SPJ4

Dropped from a bridge and allowed to fall freely to the ground is an object. Modeling the object's height over time using h(t) = 144 - 16t2 is possible

An item that is falling only due to gravity is said to be in free fall. This means that any moving object that is simply being affected by gravity is said to be "in a condition of free fall." An item of this kind will accelerate downhill at a rate of 9.8 m/s/s. If an item is just moving in one direction—downward or upward toward its peak—and is only affected by gravity, then its acceleration value is 9.8 m/s/s.

The initial velocity of an object being dropped from a height is zero meters per second (m/s) as opposed to being hurled.

To know more about Freefall visit:

https://brainly.com/question/24401643

#SPJ4

The electric flux through the surface is 5.65×〖10〗^2 Nm^2/C ≈5.6×〖10〗^2  Nm^2/C

The electric flux through a surface describes the number of electric field lines that cross that surface. It is expressed as the surface integral of the electric field through that surface.

Gauss's law states that for a closed surface, the electric flux through that surface depends only on the total charge present inside that surface. Hence, for a closed surface, the electric flux can be computed without evaluating any integrals.

The charges are: q1=3.0nC, q2=−2.0nC, q3=−7.0nC, and q4=1.0nC

Gauss's Law provides that the net electric flux through a closed surface depends only on the net charge enclosed by the surface, by the equation:

ϕ=Qnet÷ϵ0

where,

Φ is the net electric flux through the closed surface.

Qnet is the net charge enclosed by the surface.

∈_0=8.85×〖10〗^(-12) C^2/Nm^2 is the permittivity of free space.

The net charge inside the box is:

Qnet = q1+q2+q3+q4

=3.0nC−2.0nC−7.0nC+1.0nC

= −5.0nC=−5.0×10−9C

The net electric flux through the box is:

Φ=Q_net/∈_0

Φ=(-5.0×〖10〗^(-9) C)/(8.85×〖10〗^(-12) C^2/Nm^2 )

Φ=5.65×〖10〗^2 Nm^2/C ≈5.6×〖10〗^2  Nm^2/C

To learn more about charges inside a cavity. Click, https://brainly.com/question/14776586.

#SPJ4

Since the cannonball was launched horizontally (launch angle of 0) with a speed of 35m/s from a height of 15m, the time the cannonball remains in the air is for 1.75 s

A projectile is an object that moves through air in a parabolic path

Since the cannonball is a projectile and was launched horizontally (launch angle of 0) with a speed of 35m/s from a height of 15m, using the equation of motion y' - y = ut - 1/2gt² we find the time it takes the cannonball to reach the ground. or remain in the air

Since y' - y = ut - 1/2gt²  where

Substituting the values of the variables into the equation and solving for t, we have

y' - y = ut - 1/2gt²  

0 m - 15 m = 0 m/s × t - 1/2 (9.8 m/s²)t²  

- 15 m = 0 m/s - (4.9 m/s²)t²  

- 15 m = - (4.9 m/s²)t²  

t² = -15 m/- (4.9 m/s²)

t² = 3.061 s²

t = √3.061 s²

t = 1.75 s

So, the time the cannonball remains in the air is for 1.75 s

Learn more about projectile here:

https://brainly.com/question/24659939

#SPJ1

The distance of a car that accelerates at 4 m/s² until it reaches 36 m/s is 162m.

The distance moved by a body can be calculated using the following formula:

S = ut + ½at²

Where;

However, the time taken must be calculated first as follows:

t = 36m/s ÷ 4m/s²

t = 9s

S = 0 × t + ½ × 4 × 9²

S = 0 + ½ × 81 × 2

S = 162m

Therefore, the distance of a car that accelerates at 4 m/s² until it reaches 36 m/s is 162m.

Learn more about distance at: https://brainly.com/question/13511093

#SPJ1

When thermal energy is removed from particles, then the particles' kinetic energy decreases (Option D).

The expression particles' kinetic energy makes reference to the amount of motion energy (i.e. energy in movement) that contain the particles of an object, which depends on the temperature of the material.

In conclusion, when thermal energy is removed from particles, then the particles' kinetic energy decreases (Option D).

Learn more about particles' kinetic energy here:

https://brainly.com/question/17978589

#SPJ1

The car's acceleration would be for a mass of 4 kg is 3 m/s²

Given the information below:

12 Newtons of force.

Increasing speed Equals

By using Newton's Second Law of Motion, we can determine the mass of the car:

According to Newton's second law of motion, force is equal to the rate at which momentum changes. Force is defined as mass times acceleration for a constant mass.

force= mass* acceleration

This formula provides Newton's Second Law of Motion mathematically;

12= mass*3

mass=12/ 3

mass=4 kilogram

By changing the parameters in the formula, we obtain;

= 4 kilos of mass.

As a result, the vehicle with a mass of 4 kg would accelerate at 3 m/s².

Learn more about motion here-

brainly.com/question/22810476

#SPJ4

The force acting on a car will be an action type of force.

The effects of net force and mass on a material's acceleration are described by Newton's second law. Newton's second law is given as,

F = ma

Where m is the mass, a is the acceleration, and F is the force acting on a body.

The forces that actually affect a body's acceleration are referred to as the active forces when a specific body is under discussion. Ignore the resistance the car's front tires experience to make things easier.

A force of the action kind will be exerted on an automobile.

More about Newton's second law link is given below.

https://brainly.com/question/26751052

#SPJ4

Considering the definition of velocity, the magnitude of the helicopter's displacement is 700 meters.

Velocity is a physical magnitude that relates the displacement of an object, the time it takes to make this change in position and direction.

In other words, the velocity can be defined as the amount of space traveled per unit of time with which a body moves, considering the direction.

The velocity can be calculated using the expression:

velocity= displacement÷ time

In this case, you know:

Replacing in the definition of velocity:

70 m/s= displacement÷ 10 s

Solving:

70 m/s× 10 s= displacement

700 m= displacement

Finally, the magnitude of the helicopter's displacement is 700 meters.

Learn more about velocity:

brainly.com/question/25008118

brainly.com/question/4418301

brainly.com/question/24990123

brainly.com/question/14244558

brainly.com/question/25288184

#SPJ1