What is the Percentage of Fluorine as F- in a HF (pKa= 3.33 ) solution at pH= 2.33?
Answer: The percentage of fluorine as F- in a HF solution at pH 2.33 is 9.09%.
pls help!!
Which statement best describes the difference between speed and velocity?
A.
Velocity is plotted on the x-axis of a graph and speed is plotted on the y-axis.
B.
Velocity is related to position but speed is not.
C.
Velocity does not depend on time but speed does.
D.
Velocity has a specific direction but speed does not.
Answer:
option a
Velocity is plotted on the x-axis of a graph and speed is plotted on the y-axis.
As cocentration increases the vapor pressure does
As the concentration of a solution increases, the vapor pressure decreases.
What is Raoult's law ?Raoult's law states that the vapor pressure of a solution is proportional to the mole fraction of the solvent present in the solution.
When a solute is added to a solvent, it reduces the mole fraction of the solvent, and therefore the vapor pressure of the solution decreases. This is because the solute molecules occupy space on the surface of the solution, which reduces the number of solvent molecules that can escape into the gas phase, and thus reduces the vapor pressure of the solution.
Learn about Raoult's law here https://brainly.in/question/20638847
#SPJ1
Complete question:
As the concentration of a solution increases, the vapor pressure _____
How many liters of a 3.58 MK2SO4 solution are needed to provide 85.1 g of K2SO4 (molar mass 174.01g/mol)? Recall that M is equivalent to mol/L.
Explanation:
An isotope of hydrogen, known as Tritium (hydrogen-3), has a half-life of 12 years. If a sample of tritium was prepared 60 years ago, what was its original mass if its current mass is 0.42 micrograms?
Options for answers:
a.) 1.7mg b.) 13.4mg c.) 6.7mg d.) 26.8mg e.) 3.4mg
The original mass of Tritium (hydrogen-3) was 13.4mg if its current mass is 0.42 micrograms.
The formula for radioactive decay is given by:
N = N0 x (1/2)^(t/T)
where,
N = final number of radioactive atoms
N0 = initial number of radioactive atoms
t = time elapsed
T = half-life of the radioactive substance
Let's substitute the given values into the formula:
0.42 μg = N0 x (1/2)^(60/12)
0.42 μg = N0 x (1/2)^5
0.42 μg = N0 x 1/32
N0 = 0.42 μg x 32
N0 = 13.44 μg
Therefore, the original mass of the tritium sample was 13.44 micrograms.
What is radioactive decay?
Radioactive decay is the process by which an unstable atomic nucleus loses energy by emitting ionizing radiation, such as alpha particles, beta particles, and gamma rays. This process can result in a change in the number of protons and/or neutrons in the nucleus, leading to the transformation of one element into another. The rate of decay is typically characterized by a half-life, which is the time required for half of the atoms in a sample to decay.
To know more about radioactive decay, visit:
https://brainly.com/question/1770619
#SPJ1
Sheila spilled tea on her notes and is now unable to read some words.
What is the correct title for this section of Sheila's notes?
Volume
Density
Weight
Mass
Based οn the wοrds prοvided, a pοssible title fοr this sectiοn οf Sheila's nοtes cοuld be Mass.
What are Prοperties οf Matter in chemistry?In chemistry, prοperties οf matter refer tο the characteristics οr attributes that can be used tο describe and identify a substance. These prοperties can be divided intο twο categοries: physical prοperties and chemical prοperties.
Physical attributes are thοse that can be examined οr measured withοut changing the substance's makeup. Mass, vοlume, density, cοlοr, melting pοint, bοiling temperature, and sοlubility are examples οf physical qualities.
Chemical prοperties, οn the οther hand, describe hοw a substance interacts with οther substances tο prοduce new substances.
Understanding the prοperties οf matter is impοrtant in chemistry because it allοws scientists tο identify and classify different substances based οn their unique characteristics. This knοwledge can alsο be used tο predict hοw substances will behave under different cοnditiοns and tο design new materials with specific prοperties fοr variοus applicatiοns.
To learn more about Density, visit:
https://brainly.com/question/26364788
#SPJ1
Complete question:
Sheila spilled tea on her notes and is now unable to read some words.
What is the correct title for this section of Sheila’s notes?
Volume Density Weight MassPC15 (s) + H₂O(1)
POCl3 (1) + 2HCl(aq)
When 58.15 g of phosphorus pentachloride reacts with water, what mass
of hydrogen chloride will be produced?
Round your answer to the hundredths place. If needed, enter scientific
notation with the "e". For example, 1.44x107 would be entered as 1.44e7.
When 58.15 g of PCl5 reacts with water, 20.36 g mass of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.
What is the mass?
To solve this problem, we need to use the balanced chemical equation and stoichiometry. The balanced chemical equation is:
PCl5 (s) + H2O (l) → POCl3 (l) + 2HCl (aq)
From the equation, we can see that 1 mole of PCl5 reacts with 1 mole of H2O to produce 1 mole of POCl3 and 2 moles of HCl. We can use this information to calculate the moles of HCl produced from the given mass of PCl5.
First, we need to convert the mass of PCl5 to moles:
58.15 g PCl5 x (1 mol PCl5/208.24 g PCl5) = 0.2793 mol PCl5
Next, we can use the mole ratio from the balanced equation to calculate the moles of HCl produced:
0.2793 mol PCl5 x (2 mol HCl/1 mol PCl5) = 0.5586 mol HCl
Finally, we can convert the moles of HCl to grams using its molar mass:
0.5586 mol HCl x (36.46 g HCl/1 mol HCl) = 20.36 g HCl
Therefore, when 58.15 g of PCl5 reacts with water, 20.36 g of HCl will be produced. Rounded to the hundredths place, the answer is 20.36 g HCl.
To know more about mass, visit:
https://brainly.com/question/19694949
#SPJ1
Complete question is: When 58.15 g of phosphorus pentachloride reacts with water, 20.36 g mass of hydrogen chloride will be produced.
50 points
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.
80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
What is Mass Percentage?
Mass percentage is the percentage of the mass of the solute in a solution to the total mass of the solution. It is calculated by dividing the mass of the solute by the total mass of the solution and multiplying by 100%. The mass percentage is often used in chemistry to express the concentration of a solution.
Let x be the mass of the 15% solution needed and y be the mass of the 20% solution needed to prepare 200 g of 17% solution. Then we have the system of equations:
x + y = 200 (total mass of the solution)
0.15x + 0.20y = 0.17(200) (total amount of solute in the solution)
Solving for x and y, we get:
x = 80 g of 15% solution
y = 120 g of 20% solution
Therefore, 80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
Learn more about Mass Percentage from given link
https://brainly.com/question/26150306
#SPJ1
which statement describes density? Check all that apply
Density is a chemical property of an object.
The density of an object is constant.
Density is a derived unit of measure.
Density is the sum of the mass and volume of an object.
The density of an object determines whether it will sink or float.
Answer:
The density of an object is constant.
Density is a derived unit of measure.
The density of an object determines whether it will sink or float.
I will give brainly IF CORRECT.
What describes an electrolyte?
Question 1 options:
Substances that prohibit electricity from traveling across a solvent
Substance that gives out ions when dissolved in water, which are able to conduct electricity
A chemical used to combust flames in a laboratory setting
A type of current that is utilized to determine if there is a blockage anywhere in the system
Substance that gives out ions when dissolved in water, which are able to conduct electricity describes an electrolyte.
What happens to the solubility of gases in water as pressure increases?
Question 9 options:
solubility increases so less solute dissolves
solubility decreases so more solute dissolves
solubility increases so more solute dissolves
solubility decreases so less solute dissolves
Answer: Solubility increases so more solute dissolves
Explanation:
The solubility is a measure of the concentration of the dissolved gas particles in the liquid and is a function of the gas pressure. As you increase the pressure of a gas, the collision frequency increases and thus the solubility goes up, as you decrease the pressure, the solubility goes down.
If I have 4 moles of a gas pressure of 5.6 atm and a volume of 12 liters what is the temperature
Answer: 204.63 K
Explanation:
Ideal gas law
Pv=nRT
T=PV/nR
T= 5.6 X 12/(4 x0.0821)= 204.63 K
R= ideal gas constant = 0.0821
uestion 8 Calculate the percentage by mass of hydrogen in PtCl2(NH3)2 A. 1.558 B. 1.008 c.0.672 D. 0.034 E.2.016
The percentage by mass of hydrogen can be calculated from the problem as 2.016
How do you calculate the mass percent of an atom in a compound?To calculate the mass percent of an atom in a compound, you first need to determine the molar mass of the compound and the molar mass of the atom of interest.
Determine the molar mass of the compound by adding up the atomic masses of all the atoms in the compound.
Determine the number of moles of the atom of interest in one mole of the compound. This is done by dividing the atomic mass of the atom by the molar mass of the compound.
We know that the relative molecular mas of the compound is; 300 g/mol
Then;
Percent by mass of hydrogen is; 6/300 * 100/1
= 2.016%
Learn more about percent by mass:https://brainly.com/question/5394922
#SPJ1
A hot air balloon has a volume of 3100 m to the third at 91 degrees Celsius what is the volume if the air cools to 86 degrees Celsius
answer: 3057.44 m^3
Explanation:
This is Charles Law which is V1/T1=V2/T2 and temp must be in kelvin
So v2=V1 x T2/T1
v2= 3100 X 359.15 / 364.15 = 3057.44 m^3
t1= 91 +273.15 = 364.15
t2=86+273.15 =359.15
Which orbital diagram represents lithium
(atomic number = 3)?
Answer:
A.
Explanation:
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box.
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box. Thus, option A is correct.
An atom in the neutral state has the same number of protons and electrons. Since protons carry the positive charge and electrons carry negative charge of equal magnitude as that of protons, so, in neutral state the overall charge on the atom is zero.
Atomic number of Lithium is 3. Under neutral state it has 3 protons and 3 electrons. So, its overall electric charge is 0.
If an atom of Lithium loses one of its outermost electron, it is left with 2 electrons and 3 protons. Since, number of protons is 1 more than the number of electrons, the electrical charge on Lithium atom would be positive and the magnitude of charge will be equal to the number of electrons lost, which is 1 in this case.
Learn more about Lithium on:
https://brainly.com/question/32300971
#SPJ6
an ideal gas has a volume of 3.0 L is the number of moles of gas in the temperature of doubled while the pressure remains constant. What is the new volume?
Answer:
At a temperature of 300K, a gas has a volume of 3.0 L. If we double the temperature to 600K, the volume will increase to 6.0 L. However, the pressure will remain the same at 1 atm. Therefore, the new volume is 6.0 L x 1 atm = 6.0 L
superstition can only be used to explain rogue waves in what types of water
Answer: calm water.
Explanation:
A balloon held at 273 K has an initial volume of 2.0 L at 1.0 atm of pressure. If the pressure is increased to 3.5 atm, what is the new volume of the balloon?
Answer: 5.5 atm
Explanation:
Functional groups rosuvastatin
It is a synthetic statin, an dihydroxy monocarboxylic acids, a pyrimidine, a sulfonamide, and a monofluorobenzene. It shares a functional connection with hept-6-enoic acid.
What is rosuvastatin consist of?20 mg of rosuvastatin are contained in each film-coated tablet (as rosuvastatin calcium). Each 20 mg tablet also includes 0.025 milligrammes Sunset yellow FCF, 0.029 mg Allura red AC, and 91.755 mg lactose monohydrate.
What constitutes cholesterol's main functional group?Yet, because cholesterol has a steroid nucleus, it will behave differently. Aldehyde, ketone, ether, and amide groups don't exist in cholesterol. It only possesses one hydroxyl group, which, like carbohydrates, contains the functional group alcohol.
To know more about dihydroxy visit:
https://brainly.com/question/29137002
#SPJ1
what is sucrose particle type
Answer: Sucrose is a glycosyl glycoside formed by glucose and fructose units joined by an acetal oxygen bridge from hemiacetal of glucose to the hemiketal of the fructose.
Explanation:
glucose molecule starch molecule protein molecule carbon dioxide molecule water molecule amino acid molecule 1. In the space below, list the molecules in order from smallest to largest. oxygen molecule
Answer:
oxygen molecule, water molecule, glucose molecule, amino acid molecule, carbon dioxide molecule, protein molecule, starch molecule.
Explanation:
What is the percent of H in
Ca(С2H302)2?
(Ca = 40.08 g/mol, C = 12.01 g/mol,
H= 1.01 g/mol, O = 16.00 g/mol)
Answer:
3.8%
Explanation:
Ca × 1 = 50
C ×4 = 48
H × 6 = 6
O × 4 = 64
158
6÷158×100% = 3.8%
Conservation of Mass In chemical reactions, mass is neither gained nor lost. The total mass of all the reactants equals the total mass of all the products. Atoms are just rearranged into different compounds. Using this idea, solve the following problems. 1. 2KCIO3 2KCI+ 30₂ If 500 g of KCIO, decomposes and produces 303 g of KCI, how many grams of O₂ are produced? 2. N₂ + 3H₂ 2NH3 How many grams of H₂ are needed to react with 100 g of N₂ to produce 121 g of NH₂? 3. 4Fe +30₂ 2Fe₂O3 How many grams of oxygen are needed to react with 350 g of iron to produce 500 g of Fe₂O3? 4. CH₂ + 20₂2 CO₂ + 2H₂O 16 g of CH₂ react with 64 g of O₂, producing 44 g of CO₂ How many grams of water are produced? 5. CaCO3 Cao + CO, How much CO, is produced from the decomposition of 200 g of CaCO, if 112 g of CaO are produced?
Answer:
1. The balanced equation is 2KCIO3 → 2KCI + 3O2. According to the law of conservation of mass, the mass of the reactants must equal the mass of the products. Therefore, the mass of oxygen produced is:
Mass of oxygen = Mass of KCIO3 - Mass of KCI
Mass of oxygen = 500 g - 303 g
Mass of oxygen = 197 g
Therefore, 197 g of O2 are produced.
2. The balanced equation is N2 + 3H2 → 2NH3. We need to find out how much H2 is needed to react with 100 g of N2 to produce 121 g of NH3. First, we need to calculate the number of moles of N2 and NH3:
Moles of N2 = Mass of N2 / Molar mass of N2
Moles of N2 = 100 g / 28 g/mol
Moles of N2 = 3.57 mol
Moles of NH3 = Mass of NH3 / Molar mass of NH3
Moles of NH3 = 121 g / 17 g/mol
Moles of NH3 = 7.12 mol
According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, the number of moles of H2 needed is:
Moles of H2 = Moles of N2 x (3/1)
Moles of H2 = 3.57 mol x 3
Moles of H2 = 10.71 mol
Finally, we can calculate the mass of H2 needed:
Mass of H2 = Moles of H2 x Molar mass of H2
Mass of H2 = 10.71 mol x 2 g/mol
Mass of H2 = 21.42 g
Therefore, 21.42 g of H2 are needed.
3. The balanced equation is 4Fe + 3O2 → 2Fe2O3. We need to find out how much oxygen is needed to react with 350 g of Fe to produce 500 g of Fe2O3. First, we need to calculate the number of moles of Fe and Fe2O3:
Moles of Fe = Mass of Fe / Molar mass of Fe
Moles of Fe = 350 g / 55.85 g/mol
Moles of Fe = 6.26 mol
Moles of Fe2O3 = Mass of Fe2O3 / Molar mass of Fe2O3
Moles of Fe2O3 = 500 g / 159.69 g/mol
Moles of Fe2O3 = 3.13 mol
According to the balanced equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the number of moles of O2 needed is:
Moles of O2 = Moles of Fe x (3/4)
Moles of O2 = 6.26 mol x (3/4)
Moles of O2 = 4.69 mol
Finally, we can calculate the mass of O2 needed:
Mass of O2 = Moles of O2 x Molar mass of O2
Mass of O2 = 4.69 mol x 32 g/mol
Mass of O2 = 150.08 g
Therefore, 150.08 g of O2 are needed.
4. The balanced equation is CH2 + 2O2 → CO2 + 2H2O. We know that 16 g of CH2 reacts with 64 g of O2 to produce 44 g of CO2. We need to find out how much water is produced. First, we need to calculate the number of moles of CH2 and CO2:
Moles of CH2 = Mass of CH2 / Molar mass of CH2
Moles of CH2 = 16 g / 14 g/mol
Moles of CH2 = 1.14 mol
Moles of CO2 = Mass of CO2 / Molar mass of CO2
Moles of CO2 = 44 g / 44 g/mol
Moles of CO2 = 1 mol
According to the balanced equation, 1 mole of CH2 reacts with 2 moles of O2 to produce 2 moles of H2O. Therefore, the number of moles of H2O produced is:
Moles of H2O = Moles of CH2 x (2/1)
Moles of H2O = 1.14 mol x 2
Moles of H2O = 2.28 mol
Finally, we can calculate the mass of H2O produced:
Mass of H2O = Moles of H2O x Molar mass of H2O
Mass of H2O = 2.28 mol x 18 g/mol
Mass of H2O = 41.04 g
Therefore, 41.04 g of H2O are produced.
5. The balanced equation is CaCO3 → CaO + CO2. We need to find out how much CO2 is produced from the decomposition of 200 g of CaCO3 if 112 g of CaO are produced. First, we need to calculate the number of moles of CaCO3 and CaO:
Moles of CaCO3 = Mass of CaCO3 / Molar mass of CaCO3
Moles of CaCO3 = 200 g / 100.09 g/mol
Moles of CaCO3 = 1.999 mol
Moles of CaO = Mass of CaO / Molar mass of CaO
Moles of CaO = 112 g / 56.08 g/mol
Moles of CaO = 1.999 mol
According to the balanced equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2. Therefore, the number of moles of CO2 produced is:
Moles of CO2 = Moles of CaCO3 x (1/1)
Moles of CO2 = 1.999 mol
Finally, we can calculate the mass of CO2 produced:
Mass of CO2 = Moles of CO2 x Molar mass of CO2
Mass of CO2 = 1.999 mol x 44 g/mol
Mass of CO2 = 87.96 g
Therefore, 87.96 g of CO2 are produced.
NEEDD HELP URGENTLY, NOBODY ELSE IS HELPING FFS
2.0 mol of Ca(OH)2 are mixed with 2.0 mol of HCl according to the following equation:
Ca(OH)2+2HCl=CaCl2+2H2O
a. Which chemical is in excess and which is limiting reactant?
b. What is the excess in grams?
c.Theoretically,how many moles of H20 will be produced?
Answer:
Explanation:
Limiting is HCl and excess is Ca(OH)2
excess is 296 grams Ca(OH)2
2 moles H2O will be formed
5. The average human requires .66 moles of glucose (C6H1206) per day. How many mole
of CO2 (in the photosynthesis reaction) are required for this amount of glucose? The
photosynthetic reaction is: 6 CO2 + 6 H₂O ---> C6H12O6 + 6 02
Answer: 3.96 moles of CO2 are required in the photosynthesis reaction.
Explanation: The balanced equation for photosynthesis tells us that for every mole of glucose produced, 6 moles of CO2 are required. Therefore, to determine how many moles of CO2 are required for 0.66 moles of glucose, we can set up a proportion:
6 moles CO2 / 1 mole glucose = x moles CO2 / 0.66 moles glucose
Solving for x, we get:
x = (6 moles CO2 / 1 mole glucose) x (0.66 moles glucose / 1) = 3.96 moles CO2
Therefore, to produce 0.66 moles of glucose, 3.96 moles of CO2 are required in the photosynthesis reaction.
A bottle of nail polish remover containing ethyl acetate was spilled in an unventilated room measuring 9.00 m × 6.00 m × 3.00 m. After some time had passed, it was determined that 8.701 g of ethyl acetate had evaporated. Calculate the concentration of ethyl acetate in milligrams per cubic meter.
Answer:
53.69 mg/m³
Explanation:
To calculate the concentration of ethyl acetate in milligrams per cubic meter, we need to know the total volume of the room and the amount of ethyl acetate that evaporated in grams.
The total volume of the room is:
V = l x w x h
V = 9.00 m x 6.00 m x 3.00 m
V = 162.00 cubic meters
To convert the amount of ethyl acetate evaporated from grams to milligrams, we multiply by 1000:
amount of ethyl acetate = 8.701 g = 8,701 mg
Now we can calculate the concentration of ethyl acetate in milligrams per cubic meter:
concentration = amount of ethyl acetate / volume of room
concentration = 8,701 mg / 162.00 cubic meters
concentration = 53.69 mg/m³
Therefore, the concentration of ethyl acetate in the unventilated room is 53.69 mg/m³.
Create a “Chemical Reaction Poster” that will summarize key concepts about chemical reaction. In your poster, include
Definition of chemical reaction and balanced equation
Steps in balancing chemical equation and an example
Types of chemical reaction and an example for each
Picture/images related to chemical reaction
Other related information
Rubric:
Content ……………………25 points
Organization ……….… 25 points
Neatness/Creativity... 15 points
please help so it can bring my grade up
thank you soo much
project*
Answer:
Ca²+O²
Explanation:
The Ca gives out 2 electrons and oxygen gains 2 elctrons
If you are relating the levels of organization of the human body to the levels of organization of a city, what would you relate cells to? what would you relate the other levels to?.
The basic units of the human body are called cells, and they carry out specialized tasks to keep the body alive. Cells in a city might be compared to people who perform particular duties and contribute to the general efficiency of the city.
How do you think the degrees of organization in the human body compare to those in the world?Organizational hierarchy is built up from lower levels. Consequently, molecules combine to create molecules, molecules create cells, cells create tissues, tissues create organs, organs create organ systems, and organ systems create beings. The body's next level of organisation. A tissue is made up of related cells with a common purpose. Human tissues can be divided into four categories: epithelial, muscular, nerve, and connective.
How are the human body's structure and function organized, from the simplest to the most complex?The major levels of organisation in the body, from the most basic to the most complex, are atoms, molecules, organelles, cells, tissues, organs, organ systems, and the human body.
To know more about human body visit:-
brainly.com/question/14289599
#SPJ9
A sample of gas is in a container with a movable piston. The volume in the container is originally 850 ML at a temperature of 467K and a pressure of 11 point 4K PA. What will the new temperature if the volume is expanded to 1125 in El with a new pressure of 99.7 K PA?
If the volume is increased to 1125 in El with a new pressure of 99.7 K PA, the new temperature will be around 808 K.
What transpires to the gas volume in a moveable piston cylinder?Once the piston's pressure has doubled, it goes downward until the gas's pressure and the piston pressure are equal. The gas has now lost half of its original volume. The volume of gas falls to one-fourth of its initial volume if the pressure on the piston is once more increased by a factor of two.
This issue can be resolved using the coupled gas law:
(P1V1) / T1 = (P2V2) / T2
Using the following conversions, we can first change the starting volume to litres and the original pressure to atmospheres (atm):
1 mL = 0.001 L
1 kPa = 0.00987 atm
V1 = 850 mL = 0.85 L
P1 = 11.4 kPa = 0.1126 atm
T1 = 467 K
The new volume and pressure can also be converted to litres and atmospheres:
V2 = 1125 mL = 1.125 L
P2 = 99.7 kPa = 0.984 atm
Now we can plug in the values and solve for T2:
(P1V1) / T1 = (P2V2) / T2
(0.1126 atm * 0.85 L) / 467 K = (0.984 atm * 1.125 L) / T2
T2 = (0.984 atm * 1.125 L * 467 K) / (0.1126 atm * 0.85 L)
T2 = 808 K
To know more about temperature visit:-
https://brainly.com/question/13294753
#SPJ1
Answer:
548 K
I hope this helps! Cheers ^^
Circle the larger one of each pair or grouping below:
Cr²+ or Cr3
Ge, Br, Ca, or Ga
(1) The larger ion is Cr³+
(2) The larger ion is Ca.
What is the size of the ions?In the first pair, we are comparing the cations Cr²⁺ and Cr³⁺. Cations are positively charged ions that form when an atom loses one or more electrons. The charge on a cation tells you how many electrons it has lost. In this case, Cr²⁺ has lost 2 electrons, while Cr³⁺ has lost 3 electrons.
When comparing the sizes of ions, we need to consider the ionic radius. The ionic radius is the distance between the nucleus of an ion and its outermost electron shell.
As we move from left to right across the periodic table, the number of protons in the nucleus increases, which pulls the electrons closer to the nucleus and makes the atoms smaller. As we move down a column in the periodic table, the number of electron shells increases, which makes the atoms larger.
Learn more about size of ions here: https://brainly.com/question/14511468
#SPJ1