A mineral contains 675 parent atoms and 225 daughter atoms and the half-life for the radioactive element is 40 million years, the age of the rock is: approximately 46.8 million years
The half-life of the radioactive substance is 40 million years. The number of parent atoms is 675 and the number of daughter atoms is 225. To calculate the age of the rock, we must first calculate the number of half-lives. The number of daughter atoms increases as time passes, while the number of parent atoms decreases.
After each half-life, the number of parent atoms decreases by 50%, and the number of daughter atoms increases by 50%. For example, after one half-life, 337.5 parent atoms remain, and 562.5 daughter atoms have been produced. The rock's age can be determined by determining how many half-lives have elapsed. In order to calculate the number of half-lives, the following equation is used:
The number of parent atoms remaining = the original number of parent atoms × (1/2)number of half-lives
Since the initial number of parent atoms is 675, we have:
[tex]225 = 675 × (1/2)number of half-lives[/tex]
Solving for the number of half-lives, we get:
[tex]number of half-lives = log(225/675) ÷ log(1/2) ≈ 1.17[/tex]
Since one half-life is 40 million years, the age of the rock is:
Age = number of half-lives × half-life
Age = 1.17 × 40 million years = 46.8 million years
Therefore, the age of the rock is approximately 46.8 million years.
To know more about radioactive refer here:
https://brainly.com/question/1770619#
#SPJ11
will the lattice energy for lif be larger or smaller than that of lii? group of answer choices larger smaller
The lattice energy for LiF will be greater than that of LiI.
Thus, the correct answer is larger.
What is lattice energy?Lattice energy, also known as lattice enthalpy, is the energy that must be supplied to completely separate one mole of an ionic compound into its gaseous ions. The lattice energy of an ionic compound depends on two things: the charge on the ions and the size of the ions.
This energy can be calculated by subtracting the energy required to separate the ions from the energy gained when the ions bond. The reason why the lattice energy of LiF is higher than that of LiI is the smaller the ions and the higher the charge, the more energy will be released when they come together to form a crystal lattice. Li+ and F- ions are both smaller in size and higher in charge than Li+ and I- ions, respectively.
As a result, the lattice energy of LiF will be larger than that of LiI.
For more information about Lattice energy refers to the link: https://brainly.com/question/18222315
#SPJ11
student plans to react 2.1 mol of aluminum using this reaction
2AL (5) + 6H20(g) > 2AL(OH) 3 () + 3H2 (g)
The student multiples the 2.1 mol by the ratio 6:2. What did the student calculate?
Answer:
The student is calculating how many moles of water are required to fully react with 2.1 moles of aluminum.
Explanation:
2AL + 6H20 > 2AL(OH)3 + 3H2
The ratio 6:2 is the same as the molar ratio of H2O to Al: (6 moles H2O)/(2 moles Al). The student is likely calculating how many moles of water is required to fully react with 2.1 moles of Al.
sodium metal is also readily oxidized by oxygen. if the product of the reaction were dissolved in water, what would be the color of the litmus for a litmus test? explain. what is the product?
What happens to the charges in current electricity?
Answer:
This is just a quick tip.
Explanation:
An electric current is the movement of particles, starting at the moment when an external voltage is applied at one of the ends of the conductor. That, in turn, generates an electric field on the negatively charged electrons that are attracted to the positive terminal of the external voltage.
determine the type of alcohol corresponding to each given description or name. an alcohol with two other carbons attached to the carbon with the hydroxyl group
The type of alcohol with two other carbons attached to the carbon with the hydroxyl group is isopropanol or isopropyl alcohol (CH3)2CHOH.
Alcohol is an organic compound with a hydroxyl (OH) group bonded to a saturated carbon atom is called an alcohol. The simplest alcohols are methanol, ethanol, and propanol.The alcohol class is significant because it includes a variety of useful and prevalent compounds. A few examples of alcohols include ethanol, methanol, and isopropyl alcohol, isopropanol.
An alcohol is isopropyl alcohol or isopropanol (CH3)2CHOH, it's a colorless, flammable liquid that has a slightly sweet odor. It is miscible in water and most organic solvents and is used primarily as a solvent and rubbing alcohol. Isopropyl alcohol has been used as an antiseptic since the 1920s. Isopropyl alcohol's antiseptic properties are due to its ability to denature proteins.
Learn more about alcohol at:
https://brainly.com/question/29579537
#SPJ11
how the temperature and vapor pressure are related knowing the enthalpy of vaporization at the boiling temperature
If I have 6.00 moles of gas held at a temperature of 93.5 C and in a container with a volume of 41.7 liters, what is the pressure of the gas (ka)?
We can use the ideal gas law to find out the pressure of the gas.
★ PV = nRT
★P = nRT/V
Where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the ideal gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.
We are given-
Moles of gas,n = 6 Temperature, T = 93.5 C = 366.5KVolume of gas, V= 41.7 LOn substituting the values -
→ P = ( 6 × 0.0821×366.5)/41.7
→ P = 180.54/41.7
→ P =4.33 atm
→ P = 4.33×101.3 KPa
→P = 438.629 KPa
Henceforth, the pressure of the gas is 438.629 KPa.
during the nitration of methyl benzoate, which acts as a nucleophile? group of answer choices methyl benzoate hno3 h2so4 benzene a mixture of hno3 and h2so4
During the nitration of methyl benzoate, acts as a nucleophile is a. methyl benzoate.
Nitration is a chemical reaction process in which an aromatic ring is treated with a mixture of nitric acid and sulphuric acid (nitration mixture) to add one or more nitro functional groups to the ring. Aromatic compounds like benzene, toluene, or naphthalene, are often used as substrates.
The compound that undergoes nitration is generally an electron-rich compound. The reaction mechanism of the nitration reaction includes the generation of an intermediate compound known as nitronium ion, NO2+. In this case, during the nitration of methyl benzoate, the methyl benzoate acts as the nucleophile.HTML formatted answer:The nucleophile during the nitration of methyl benzoate is the methyl benzoate.
Learn more about nucleophile at:
https://brainly.com/question/6357352
#SPJ11
a lead fishing sinker is immersed in a solution of fe2 and cu2 . which of the two cations will the lead metal react with? fe2 cu2 write the balanced reaction that will occur. be sure to include the physical states of all species.
The two cations, Fe2+ and Cu2+, present in the solution will react with lead metal to form Pb2+ in lead fishing sinker immersed in a solution of Fe2+ and Cu2+. The balanced reaction that will occur is given below; Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s)
When the lead fishing sinker is immersed in the solution containing Fe2+ and Cu2+, the lead metal will get oxidized to Pb2+ in both the cases, forming two separate reaction equations. Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) (Equation 1)Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s) (Equation 2)Here, in the reaction 1, the Fe2+ cation acts as an oxidizing agent and gets reduced to Fe, while the Pb metal gets oxidized to Pb2+.
In reaction 2, the Cu2+ cation acts as an oxidizing agent and gets reduced to Cu, while the Pb metal gets oxidized to Pb2+.Lead is a less reactive metal and gets easily oxidized. This leads to the formation of Pb2+ ions in the solution. The lead metal is immersed in the solution and thus gets oxidized as per the redox reactions mentioned above. The two reactions occur independently in the presence of Fe2+ and Cu2+ ions.
Know more about redox reactions here:
https://brainly.com/question/13293425
#SPJ11
for the reaction, determine how many moles of chlorine cl2 would be needed to react with 3 moles of phosphorus p4 to entirely use up all the phosphorus
For the given reaction, the moles of chlorine required to react with 3 moles of phosphorus to completely use up all the phosphorus.
The balanced chemical equation for the reaction is:
P4 + 6Cl2 → 4PCl3
Now, the stoichiometric ratio between P4 and Cl2 can be seen from the balanced equation as 1 mole of P4 reacts with 6 moles of Cl2.
So,
3 moles of P4 will require= 6 moles of Cl2 × (3 moles of P4 / 1 mole of P4)= 18 moles of Cl2
Therefore, 18 moles of Cl2 would be required to react with 3 moles of P4 to entirely use up all the phosphorus.
Note:
The balanced chemical equation is used to calculate the moles of reactants and products involved in a chemical reaction.
The mole ratio between the reactants and products can be determined from the balanced chemical equation.
To know more about the moles https://brainly.com/question/26416088
#SPJ11
the density of normal water (the hydrogens do not have neurons) at 20c is 0.9982 g/ml. calculate the density you would expect for heavy water by assuming the deuterium is the same size as normal hydrogen when it is part of the water
The density of heavy water at 20°C is 0.112 g/ml.
The density of normal water at 20°C is 0.9982 g/ml. To calculate the density of heavy water, we need to consider the difference in mass between normal hydrogen (H) and deuterium (D).
Since deuterium has one proton and one neutron, its mass is about twice that of hydrogen.
Assuming the size of deuterium is the same as normal hydrogen when it is part of water, the molar mass of heavy water would be 2 x 1.0079 g/mol (the molar mass of H2O), or 2.0158 g/mol.
Since the density of a substance is equal to the mass of the substance per unit volume, the density of heavy water at 20°C would be equal to 2.0158 g/mol/18 g/mol, which is equal to 0.112 g/ml.
This is approximately 11.2% greater than the density of normal water at 20°C.
Water consists of two hydrogen atoms bonded to one oxygen atom. In the case of normal water, both hydrogen atoms are normal hydrogen (H), while in heavy water, one of the hydrogen atoms is replaced by deuterium (D).
As deuterium is about twice as massive as hydrogen, its presence increases the mass of the molecule, resulting in a higher density.
The density of heavy water at 20°C is approximately 11.2% greater than the density of normal water, due to the presence of deuterium, which has twice the mass of hydrogen.
By assuming the size of deuterium is the same as normal hydrogen, the expected density of heavy water at 20°C by multiplying the molar mass of water (1.0079 g/mol) by two, giving us a density of 0.112 g/ml.
to know more about density refer here:
https://brainly.com/question/15164682#
#SPJ11
A rigid container with a volume of 35.0 mL is filled with enough gas to have a
pressure of 2.62 atm and then sealed so no more gas could enter and none could
leave. The original temperature is 298.52 K and the final temperature is 357.30
K. What is the pressure in the container at the higher temperature.
The pressure in the container at the higher temperature would be 3.37 atm.
Ideal gas equationTo solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
Since the container is sealed and the number of moles of gas cannot change, we can set the initial and final pressures and volumes equal to each other, and solve for the final pressure:
P1V1/T1 = P2V2/T2
Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the final pressure and temperature, respectively.
Substituting the given values, we get:
2.62 atm × 35.0 mL / 298.52 K = P2 × 35.0 mL / 357.30 K
Simplifying, we get:
P2 = (2.62 atm × 35.0 mL / 298.52 K) × (357.30 K / 35.0 mL)
P2 = 3.37 atm
Therefore, the pressure in the container at the higher temperature is approximately 3.37 atm.
More on the ideal gas equation can be found here: https://brainly.com/question/28837405
#SPJ1
a mixture containing nitrogen and hydrogen weighs 3.54 g and occupies a volume of 7.48 l at 305 k and 1.03 atm. calculate the mass percent of n2. assume ideal-gas behavior and report answer as a percent. (3 sf) [1.24]
Answer: Mass percent N2 = 79.55% (to 3 significant figures).
To calculate the mass percent of N2 in the mixture, first calculate the molar mass of the mixture, which is:
Molar mass = (3.54g * 1 mol/28.0134 g) + (7.48 l * 1.03 atm * 0.08206 l * atm / (305 K * 0.7302 mol/g))
Molar mass = 3.542 g/mol
Then, calculate the mass percent of N2 in the mixture:
Mass percent N2 = (28.0134 g * 1 mol/3.542 g) * 100%
Mass percent N2 = 79.55% (to 3 significant figures).
Learn more about Mass percent here:
https://brainly.com/question/5394922#
#SPJ11
for the reaction 2KlO3 —> + 3O2 how many moles of potassium iodate are required to produce 250g of oxygen
To determine the number of moles of KIO3 required to produce 250g of O2, we need to use stoichiometry and the molar mass of O2. the molar mass of O2 The molar mass of O2 is 32 g/mol 16 g/mol for each oxygen atom.
What is an atom ?An atom is the basic unit of matter, consisting of a nucleus of protons and neutrons, with electrons in orbit around the nucleus. Atoms are incredibly small, with a diameter of about 0.1 to 0.5 nanometers. The identity of an element is determined by the number of protons in the nucleus of its atoms.
What is a nucleus ?The nucleus is a dense, positively charged central core of an atom that contains protons and neutrons. It is surrounded by negatively charged electrons that orbit around the nucleus in shells or energy levels. The number of protons in the nucleus determines the atomic number and chemical properties of an element. The nucleus also holds most of the mass of an atom. In summary, the nucleus is the central region of an atom where most of its mass is concentrated, and it is made up of protons and neutrons.
To know more about atom visit :
https://brainly.com/question/30898688
#SPJ1
help me please and thank you
The explanation that best describes what beta particles are blocked by is: This type of radiation is blocked by aluminum or metal foil.
What are beta particles?Beta particles are high-energy, high-speed electrons or positrons emitted by certain types of radioactive decay. Beta particles have a lower penetrating power than gamma rays and can be stopped by thin layers of materials such as aluminum or metal foil.
However, if the beta particle is more energetic, it may require a thicker material such as plastic, wood or thick clothing to block it. Lead or concrete can also be effective in stopping beta particles, but they are not as effective as they are in blocking gamma rays.
Learn more about beta particles at:
https://brainly.com/question/24312947
#SPJ1
which of the following are not results of adding a catalyst to a chemical system at equilibrium? select all that apply: the forward and reverse reaction rates are increased. the reaction quotient decreases. the reaction quotient is unaffected. the equilibrium constant increases.
Adding a catalyst to a chemical system at equilibrium does not result in the reaction fraction decreasing and the equilibrium constant increasing. Here options B and D are the correct answer.
Adding a catalyst to a chemical system at equilibrium can increase the rate of both the forward and reverse reactions, but it does not change the position of the equilibrium. The following are the possible effects of adding a catalyst:
A) The forward and reverse reaction rates are increased. This statement is true. A catalyst provides an alternate reaction pathway with a lower activation energy, which means more molecules can react in a given amount of time, resulting in an increase in both the forward and reverse reaction rates.
B) The reaction quotient decreases. This statement is not necessarily true. The reaction quotient (Q) depends on the concentrations of the reactants and products at any given point during the reaction. Adding a catalyst does not affect the concentrations of the reactants and products, so the reaction quotient remains the same.
C) The reaction quotient is unaffected. This statement is true. As mentioned above, the reaction quotient depends on the concentrations of the reactants and products, which are not affected by the addition of a catalyst.
D) The equilibrium constant increases. This statement is not true. The equilibrium constant is a constant value that depends only on the temperature and the stoichiometry of the balanced chemical equation. Adding a catalyst does not change the equilibrium constant value.
To learn more about chemical systems
https://brainly.com/question/12208104
#SPJ4
Complete question:
Which of the following are not the results of adding a catalyst to a chemical system at equilibrium? select all that apply:
A - the forward and reverse reaction rates are increased.
B - the reaction quotient decreases.
C - the reaction quotient is unaffected.
D - the equilibrium constant increases.
What is the equilibrium constant for the reversible reaction in aqueous medium below given that respective concentrations of A, B, C, and D are 0.0117 M, 0.00440 M, 0.00550 M, and 0.00780 M? 3A + 3B 2C + 3D Report your answer to the nearest whole number.
The equilibrium constant for the reversible reaction in aqueous medium is 88.
In order to determine the equilibrium constant for the reversible reaction in aqueous medium given that respective concentrations of A, B, C, and D are 0.0117 M, 0.00440 M, 0.00550 M, and 0.00780 M, we can use the equilibrium constant expression:
Kc = [tex][C]^{2} [D]^{3} / [A]^{3} [B]^{3}[/tex]
where [A], [B], [C], and [D] are the molar concentrations of the species involved in the reaction.
Substituting the concentration values into the equilibrium constant expression:
Kc =[tex](0.00550 M)^{2} (0.00780 M)^{3} / (0.0117 M)^{3} (0.00440 M)^{3}[/tex]
Kc = 87.8.
The equilibrium constant for the reversible reaction in aqueous medium is 88 (to the nearest whole number).
To learn more about equilibrium constant; https://brainly.com/question/3159758
#SPJ11
we know that most solids are more soluble in warm water than in cold water. does thesolubility of nh4cl fit this pattern? explain
Yes, the solubility of NH4Cl fits the pattern that most solids are more soluble in warm water than in cold water.
On increasing the temperature of the solvent, the solubility of the solute increases. The solubility of NH4Cl, which is an example of a solid, follows this trend. In other words, ammonium chloride (NH4Cl) dissolves more readily in warm water than in cold water.
When water is heated, the kinetic energy of the water molecules increases, causing them to move more rapidly. As a result, more space is created in the water, allowing it to dissolve more solute.
NH4Cl is a soluble salt that dissolves in water with a pH value of less than 7. It is readily soluble in water, with a solubility of 372 g/L at 20 degrees Celsius. As a result, increasing the temperature will increase the solubility of NH4Cl.
Learn more about solids: https://brainly.com/question/19974931
#SPJ11
8.
a) Will all of the salt dissolve?
b) What mass of NaNO3 will dissolve at this temperature?
Grams of solute
Oh oh
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
KI
b. 10g of Ce₂(SO4)3 at 10°C.
c. 125g of KNO3 at 60°C.
NH37
d. 65g of NH4Cl at 80°C.
e. 12g of NH3 at 90°C.
NaNO3
KCIO3
KNO3
NHẠC
Ce2(SO4)3
0
0 10 20 30 40 50 60 70 80 90 100
Temperature (°C)
KCI
Naci
Determine if each of the following is unsaturated (U), saturated (S), or
supersaturated (S.S).
a. 55g of NH3 at 20°C.
f. 80g of NaNO3 at 10°C..
g. 145g of NaNO3 at 80°C.
h. 35g of NaCl at 100°C..
Whether a substance dissolves in a particular solvent depends on several factors, including the solubility of the substance in the solvent, the temperature of the solvent, and the amount of substance and solvent involved.
What is solubility?Solubility refers to the ability of a substance to dissolve in a solvent, which is typically a liquid, gas, or solid.
The solubility of salts tends to increase with temperature, so it is likely that more Ce₂(SO₄)₃ will dissolve at higher temperatures and not at 10°C.At 60°C, it is likely that all 125g of KNO₃ will dissolve in the solvent.At 80°C, it is likely that all 65g of NH₄Cl will dissolve in the solvent.55g of NH3 is less than what can dissolve in 1 liter of water at this temperature. Thus, the solution is unsaturated (U).At 10°C, the solubility of NaNO₃ in water is about 80 g/100 mL. Since the amount of NaNO₃ is equal to or less than the maximum amount that can dissolve in 100 mL of water, the solution is saturated (S).At 80°C, the solubility of NaNO₃ in water is about 200 g/100 mL. Since the amount of NaNO₃ is greater than the maximum amount that can dissolve in 100 mL of water, the solution is supersaturated (S.S).At 100°C, the solubility of NaCl in water is about 40 g/100 mL. Since the amount of NaCl is less than the maximum amount that can dissolve in 100 mL of water, the solution is unsaturated (U).To find out more about solubility, visit:
https://brainly.com/question/28170449
#SPJ1
explain why the actual strength of metals is 1 to 2 orders of magnitude lower than their theoretical strength? (2 points):
Metals have a high theoretical strength, but their actual strength is usually lower. This is because metals are made up of individual grains or crystals, which are all slightly misaligned with each other.
During loading, these misalignments create slip planes which concentrate the applied stress, leading to the material yielding (or deforming plastically) before it breaks.
Other causes of the reduced actual strength are stress corrosion cracking, fatigue, and defects like inclusions and grain boundaries.
The actual strength of a metal is affected by the grain size and the volume fraction of grain boundaries, as the grain boundaries are weaker than the grains themselves.
The shape and distribution of the grains also influence the strength, as the misalignments of the grains affect how stress is distributed in the material.
The microstructural features, such as the presence of inclusions, can affect the strength. Finally, the chemical composition and heat treatment of the metal can also have a great effect on the strength.
The actual strength of metals is lower than their theoretical strength due to the misalignments between grains, the presence of grain boundaries, stress corrosion cracking, fatigue, and microstructural features like inclusions.
Heat treatment and chemical composition can also affect the strength of metals.
to know more about metal refer here:
https://brainly.com/question/28650063#
#SPJ11
why might it be a good idea to include reactions that contain substrate but not enzyme in your kinetic analysis?
It is important to include reactions that contain the substrate but not the enzyme in your kinetic analysis to understand the substrate's effect on the reaction rate, independent of the enzyme.
It is a good idea to include reactions that contain substrate but not enzyme in your kinetic analysis because doing so will provide you with a control sample that will assist you in calculating the rate of reaction in the absence of enzyme. Therefore, the rate of reaction produced by this reaction will provide a benchmark against which the rate of reaction of the test sample containing enzyme can be measured.
Additionally, by including reactions that contain substrate but no enzyme, it is possible to measure the effects of other factors on the reaction rate. These factors may include temperature, pressure, pH, and the presence of inhibitors and activators.
In summary, including reactions that contain substrate but no enzyme in your kinetic analysis will enable you to quantify the effect of enzyme activity on the rate of reaction and understand the impact of other factors on the reaction rate.
Learn more about kinetic analysis at https://brainly.com/question/31106231
#SPJ11
if the rate constant for a reaction triples when the temperature rises from 25 oc to 65 oc, what is the activation energy of the reaction? give answer in kj/mole.
The activation energy of the reaction, given that the rate constant has tripled when the temperature rose from 25 °C to 65 °C, is 42.6 kJ/mole.
Activation energy is the minimum energy required for a reaction to take place. It is calculated using the Arrhenius equation, which states that the rate constant, k, is proportional to the exponential of negative activation energy (Ea) divided by the gas constant (R) multiplied by the absolute temperature (T).
As the rate constant has tripled when the temperature increased, the activation energy can be calculated as Ea = -R * (1/T2 - 1/T1).
Plugging in the given temperature values of 25 °C and 65 °C and the gas constant, R, the activation energy is 42.6 kJ/mole.
To know more about rate constant click on below link:
https://brainly.com/question/14977272#
#SPJ11
One mole of which substance contains a total of 6. 02 X 10²³ atoms
One mole any of which substance contains a total of 6.023 X 10²³ atoms by atoms/molecule.
6.02 X 10²³ units of any given substance make up one mole of that material. The fact that one mole of a material has a mass in grammes that is exactly equal to the substance's formula weight is also significant. As a result, one mole of an element contains 6.02 X 10²³ of the element's atoms and has a mass in grammes equal to the element's atomic weight.
Make sure to be clear about what you're referring to while discussing the diatomic gases, sulphur, and phosphorus, which do not exist as single atoms.
1 mole of substance contains 6.023 X 10²³ molecules.
Volume of solution = 100 mL = 0.1 L
Molarity of solution = 0.02 M
Molarity = number of moles of solute/ Volume of solution (in L)
no. of moles of solute = molarity × volume
=0.02 mol L−1×0.1 L
= 0.002 mol.
Thus, 12.044 x 10²⁰ molecules of H2SO4 are present in 100mL of 0.02 M H2SO4 solution.
Learn more about Mole:
https://brainly.com/question/20432652
#SPJ4
Complete question;
One mole of any substance contains 6.022 × 1023 atoms/molecules. Number of molecules of H2SO4 present in 100 mL of 0.02M H2SO4 solution is.
ms. salis explains to her class that sodium (na) and chlorine (cl) atoms bond to make table salt (nacl). which is the best description of table salt?
Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.
Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.
Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.
Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.
It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.
Learn more about table salt here:
https://brainly.com/question/5528908
#SPJ11
In the lab, you modeled the effect of Earth's surface on properties of the atmosphere.
Which general principle of science is shown by the lab?
1. Every system has only two parts, such as Earth's surface and its atmosphere.
2. Each part of a system works independently of the other parts.
3. Changes to one part of a system can affect other parts of the system.
4. A model can describe only one part of a system.
Answer:
The general principle of science shown by the lab is: "Changes to one part of a system can affect other parts of the system."
Explanation:
This principle is also known as the principle of interdependence, which states that parts of a system are interconnected and can influence one another. In this case, the lab modeled how changes to Earth's surface, such as deforestation or urbanization, can affect the properties of the atmosphere, such as temperature and composition.
how many grams of fe are there in a sample of fe that contains the same number of moles as a 14.0 gram sample of ar?
The mass of the iron (Fe) sample that contains the same number of moles as a 14.0 g sample of Ar is 55.8 g.
To solve this problem, we must first determine the number of moles of Ar in the given 14.0 g sample. Ar's molar mass is 39.95 g/mol, according to the periodic table. Therefore, 14.0 g of Ar (1 mol Ar/39.95 g) = 0.350 mol Ar.
So the sample's Fe mass, which contains the same number of moles, is determined using the molar mass of iron (Fe) from the periodic table. Iron's molar mass is 55.8 g/mol. Therefore, the mass of the Fe sample is as follows:0.350 mol Fe x 55.8 g/mol = 19.53 g Fe. So, there are 19.53 grams of Fe in a sample of Fe that contains the same number of moles as a 14.0 g sample of Ar.
Learn more about iron (Fe) : https://brainly.com/question/30649367
#SPJ11
how many ml of 0.280 m barium nitrate are required as bariium sulfate all the sulfate ions from 25.0 ml of 0.350 m aluminum sulfate?
To determine how many milliliters (ml) of 0.280 m barium nitrate are required to remove all of the sulfate ions from 25.0 ml of 0.350 m aluminum sulfate, you can use the following equation:
Molarity (M) = moles/volume (V)
First, calculate the number of moles of sulfate ions in the given volume of aluminum sulfate.
M = 0.350 M = moles/25.0 ml
moles = 0.350 M x 25.0 ml = 8.75 moles
Next, calculate the number of moles of barium nitrate that are needed to completely remove the sulfate ions.
M = 0.280 M = moles/V
moles = 8.75 moles/V
V = 8.75 moles/0.280 M = 31.25 ml
Therefore, 31.25 ml of 0.280 m barium nitrate is required to remove all of the sulfate ions from 25.0 ml of 0.350 m aluminum sulfate.
This is because molarity (M) is a measure of concentration that is equal to moles of a substance divided by the volume of the solution (V). Thus, to remove the sulfate ions from the aluminum sulfate solution, you must calculate the molarity of the aluminum sulfate, calculate the number of moles of sulfate ions in the solution, and then calculate the number of moles of barium nitrate that are needed to completely remove the sulfate ions. The volume of barium nitrate required is equal to the number of moles of sulfate ions divided by the molarity of the barium nitrate.
To know more about barium nitrate click on below link :
https://brainly.com/question/13275883#
#SPJ11
explain why a 0.01msolution of hydrochloric acid has a ph of 2 but a 0.01 msolution of acetic acid is 3.37
A 0.01m solution of hydrochloric acid has a pH of 2 because the hydrochloric acid is a strong acid and completely dissociates into its ions, H+ and Cl-, when it is dissolved in water.
This increases the amount of H+ in the solution, resulting in a low pH. On the other hand, acetic acid is a weak acid, which means that it does not completely dissociate into its ions when it is dissolved in water.
Therefore, there is not a large increase in H+ ions in the solution and the pH of the solution is not as low, resulting in a pH of 3.37.
To know more about hydrochloric acid, refer here:
https://brainly.com/question/27173946#
#SPJ11
a face-centered cubic cell contains x atoms at the corners of the cell and y atoms at the faces. what is the empirical formula of the solid?
The empirical formula of the solid can be represented as x:y.
The empirical formula of the solid is determined by the ratio of the atoms found at the corners and faces of the face-centered cubic cell.
Since the number of atoms at the corners is represented by x, and the number of atoms at the faces is represented by y, then the empirical formula of the solid can be represented as x:y.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the empirical formula of the solid can be written as 2:6, or 1:3.
The empirical formula of the solid, it is necessary to first determine the total number of atoms that make up the cell.
This can be done by multiplying the number of atoms at the corners (x) by 8, since there are 8 corners in a face-centered cubic cell, and adding the result to the number of atoms at the faces (y).
This total number of atoms can be represented as T, and can be written as T = 8x + y.
The empirical formula of the solid is then determined by dividing the number of atoms at the corners (x) and faces (y) by the total number of atoms (T). This calculation can be written as x/T and y/T.
Therefore, the empirical formula of the solid is determined by the equation x/T:y/T.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the total number of atoms in the cell is 14 (8x2 + 6).
Therefore, the empirical formula of the solid can be calculated as 2/14:6/14, or 1:3.
The empirical formula of the solid in a face-centered cubic cell can be determined by,
calculating the total number of atoms in the cell (8x + y), and then dividing the number of atoms at the corners (x) and faces (y) by this total number. The result is the empirical formula of the solid, which is represented as x:y.
to know more about empirical formula refer here:
https://brainly.com/question/14044066#
#SPJ11
the buret will be filled with 0.3000 m hcl and 25 ml of 0.40 m nahco3 solution will be in the beaker with methyl orange as the indicator. write a complete balanced equation for the neutralization reaction between hcl and nahco3.
The complete balanced equation for the neutralization reaction between HCl and NaHCO₃ is:
HCl + NaHCO₃ → NaCl + H₂O + CO₂
The reaction between hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃) is known as a neutralization reaction. In this reaction, HCl and NaHCO₃ combine to produce NaCl, water, and carbon dioxide.
The reaction can be represented by the following equation: HCl + NaHCO₃ → NaCl + H₂O + CO₂
This reaction already the balanced chemical equation for the reaction since the number of each element in the reactant side is equal to the number of each element in the product side.
Learn more about balanced equation here: https://brainly.com/question/11904811.
#SPJ11