Can someone PLEASE help me with this im struggling bad
Answer:
4.5+2.34= 6.844.5-5 =-0.56.00+3.411= 9.4113.4×2.32 = 7.8887.77/2.3= 3.377. 1200×23.4=28080
9. = 78.512
10. =341.199
11= 7.45
12 =65.0023
13.=3400210.34
Explanation:
please mark me as branliest
hope it is helpful
Which statement best describes why an element's atomic number is different from its atomic mass?
A. The atomic number represents the number of electrons, while the atomic mass represents the total mass of the protons and neutrons.
B. The atomic number represents the number of protons, neutrons, and electrons, while the atomic mass represents the total mass of the protons, neutrons, and electrons.
C. The atomic number represents the number of protons, while the atomic mass represents the total mass of the protons, neutrons, and electrons.
D. The atomic number represents the number of protons, while the atomic mass represents the total mass of the protons and electrons.
Answer: C
Explanation: The atomic number is fixed by the number of protons. An element will have an exact number of protons. The neutrons can vary, and they are the reason elements have isotopes (all the same number of protons, but some have differing numbers of neutrons). Electrons are too small to be counted in the atomic weight figures.
Calculate the moles in 3x10^22molecules of water
Answer:
It is 0.05 moles of water
Explanation:
From avogadro's number:
[tex]{ \sf{6.02 \times {10}^{23} \: mole cules= 1 \: mole }} \\ { \sf{3 \times {10}^{22} \: molecules = ( \frac{3 \times {10}^{22} }{6.02 \times {10}^{23} }) \: moles }} \\ \\ { \sf{ = 0.05 \: moles}}[/tex]
Answer:
[tex]\boxed {\boxed {\sf 0.05 \ mol \ H_2O}}[/tex]
Explanation:
We are asked to calculate the number of moles of water, given the molecules of water.
We will convert moles to molecules using Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance. In this case, the particles are molecules of water or H₂O.
We will convert using dimensional analysis, so we must set up a ratio using Avogadro's Number.
[tex]\frac {6.022 \times 10^{23} \ molecules \ H_2O} { 1 \ mol \ H_2O}[/tex]
We are converting 3 × 10²² molecules of water to moles, so we must multiply the ratio by this value.
[tex]3 \times 10^{22} \ molecules \ H_2O*\frac {6.022 \times 10^{23} \ molecules \ H_2O} { 1 \ mol \ H_2O}[/tex]
Flip the ratio so the units of molecules of water cancel.
[tex]3 \times 10^{22} \ molecules \ H_2O*\frac{ 1 \ mol \ H_2O} {6.022 \times 10^{23} \ molecules \ H_2O}[/tex]
[tex]3 \times 10^{22} *\frac{ 1 \ mol \ H_2O} {6.022 \times 10^{23}}[/tex]
[tex]\frac {3 \times 10^{22}} {6.022 \times 10^{23}} \ mol \ H_2O[/tex]
[tex]0.04981733643 \ mol \ H_2O[/tex]
The original value of molecules of water ( 3 × 10²² ) has 1 significant figure, so our answer must have the same number of sig figs. For our answer that is the hundredth place. The 9 in the thousandth place tells us to round the 4 in the hundredth place up to a 5.
[tex]0.05 \ mol \ H_2O[/tex]
3×10²² molecules of water are equal to 0.05 moles of water.
Which of the following is a scientific question you could ask about shoes?
A. Are modern sandals similar to sandals from the 1960s?
B. What shoes will be popular next summer?
C. What is my favorite shoe color?
D. Are there any running shoes that help people run faster?
Answer:
D. Are there any running shoes that help people run faster?
Explanation:
because it's the question that more seems scientific.
i hope this helps
6. When conducting experiments, scientists use
to help guide their processes.
When conducting research, scientists use the scientific method to collect measurable, empirical evidence in an experiment related to a hypothesis (often in the form of an if/then statement), the results aiming to support or contradict a theory.
Hope this helps you!
Which of the following statements correctly explains why the excretory system is different from the digestive system? (1 point)
The excretory system is different from the digestive system because it removes waste from the body by filtering water, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering urine, which
includes mostly the by-products of metabolism
The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism, filtering food
The excretory system is different from the digestive system because it removes waste from the body by filtering blood, which
includes mostly the by-products of metabolism,
The body is composed of several systems. Each system involves various organs and associated structures.
The correct answer is "The excretory system is different from the digestive system because it removes waste from the body by filtering food, which
includes mostly the by-products of metabolism."
The digestive system is mostly concerned with the breakdown of food and its subsequent absorption in the body. Several organs are responsible for this from the mouth to the small intestine.
The excretory system filters removes wastes from the body by filtering food substances which includes mostly the by-products of metabolism.
Learn more: https://brainly.com/question/13258877
Which of these is a reason why nuclear power is important?
4.4.2 nuclear power
Answer:
Fossil fuels will run out soonA gas has a volume of 4.25 m3 at a temperature of 95.0°C and a pressure of 1.05 atm. What temperature will the gas have at a pressure of 1.58 atm and a volume of 2.46 m3
Answer:
[tex]\boxed {\boxed {\sf 82.7 \textdegree C}}[/tex]
Explanation:
We are asked to find the temperature of a gas given a change in pressure and volume. We will use the Combined Gas Law, which combines 3 gas laws: Boyle's, Charles's, and Gay-Lussac's.
[tex]\frac {P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
Initially, the gas has a pressure of 1.05 atmospheres, a volume of 4.25 cubic meters, and a temperature of 95.0 degrees Celsius.
[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{P_2V_2}{T_2}[/tex]
Then, the pressure increases to 1.58 atmospheres and the volume decreases to 2.46 cubic meters.
[tex]\frac {1.05 \ atm * 4.25 \ m^3}{95.0 \textdegree C}= \frac{1.58 \ atm *2.46 \ m^3}{T_2}[/tex]
We are solving for the new temperature, so we must isolate the variable T₂. Cross multiply. Multiply the first numerator by the second denominator, then multiply the first denominator by the second numerator.
[tex](1.05 \ atm * 4.25 \ m^3) * T_2 = (95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)[/tex]
Now the variable is being multiplied by (1.05 atm * 4.25 m³). The inverse operation of multiplication is division, so we divide both sides by this value.
[tex]\frac {(1.05 \ atm * 4.25 \ m^3) * T_2}{(1.05 \ atm * 4.25 \ m^3)} = \frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]
[tex]T_2=\frac{(95.0 \textdegree C)*(1.58 \ atm * 2.46 \ m^3)}{(1.05 \ atm * 4.25 \ m^3)}[/tex]
The units of atmospheres and cubic meters cancel.
[tex]T_2=\frac{(95.0 \textdegree C)*(1.58* 2.46 )}{(1.05 * 4.25 )}[/tex]
Solve inside the parentheses.
[tex]T_2= \frac{(95.0 \textdegree C)*3.8868}{4.4625}[/tex]
[tex]T_2= \frac{369.246}{4.4625} \textdegree C}[/tex]
[tex]T_2 = 82.74420168 \textdegree C[/tex]
The original values of volume, temperature, and pressure all have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place. The 4 in the hundredth place to the right tells us to leave the 7 in the tenths place.
[tex]T_2 \approx 82.7 \textdegree C[/tex]
The temperature is approximately 82.7 degrees Celsius.
How old is a piece of cotton cloth if the half-life of carbon-14 is 5,730 years, and the carbon-14 composition of the cloth is 22 percent that of living plants?
Answer:5600 years
Explanation:
the amount of time it takes for the quantity to lose 50% (Half life) of its value. The half-life of carbon-14 is about 5600 years. Thus, after 5600 years, a piece of cotton cloth will contain half the carbon-14 that was in the original cotton plant.
What is the equation used to calculate the density of a material?
Answer:
density = (mass) divided by (volume)
or just D = M/V
what are adipoyl chloride used for or uses?
Answer:
Explanation:
It is a colorless liquid. It reacts with water to give adipic acid. It is prepared by treatment of adipic acid with thionyl chloride.
Adipoyl Chloride can be used in the synthesis of nylon. Also it is used in the synthesis of chiral polymer for membrane application.
So if I was shrunken into a tiny person what would you do to me like would you take care of me would you crush me with your bare feet or something
Explanation:
It is really bad when you are in some kind of problems and you don't have anybody to help you out. You do not even know where you will meet a person you treated good or bad. We have to treat every human equally,no matter the outcome.
So in my opinion, I would take care of you.
Helppppp….. is this right?
Answer:
Yes, it is correct.
Explanation:
400 cm = 4 m
40 m = 40 m
0.4 km = 400m
Therefore, 400 cm < 40 m < 0.4 km
Answer:
Explanation:
400 centimeter....... smallest
0.4 kilometer .............. middlest
40 meter..................... greatest
What is the Color of trioxonitrate
Answer:
And the ans is yellowish
11. What is the mass of the object in the picture below? The density is 0.789g/mL.
Hint: You will need to find the volume first!
Answer: 3.156 grams
Explanation: The additional volume is 4 ml. (0.789 g/ml)*(4 ml) = 3.156 grams
Write an ionic equation for oxygen reacting with water to form hydroxide ions at the cathode
Explanation:
oxygen (O)will react with water(H2O) to form hydroxide which is (OH
Based on the definition given,
which sentence correctly uses
the word compare?
A. Compare the total amount of rainfall in
California for the year 2011.
B. Compare the similarities of the climate
in Ireland with the climate in Greenland.
C. Compare the best way to prepare to
take a standardized test.
Answer: B. Compare the similarities of the climate in Ireland with the climate in Greenland.
We should Compare the similarities of the climate in Ireland with the climate in Greenland.
How many GRAMS of phosphorus are present in 2.75 moles of phosphorus pentachloride ?
Answer:
molecular weight of Phosphorus Pentachloride or grams The molecular formula for Phosphorus Pentachloride is PCl5. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Phosphorus Pentachloride, or 208.238761 grams.
Explanation:
may this answer is helpful for you
how many times larger is 45000 than 0.0045?
Answer:
10,000,000
Explanation:
45000÷0.0044
=10,000,000
Answer:
10,000,000 times larger.
Explanation:
Multiply 0.0045 by 10,000,000 to get 45000. Or, Divide 45000 by 0.0045 to get 10,000,000.
Evaporation of water off of the surface of leaves
a
Chemical Change
b
Physical Change
Read the information in the table below:
Reaction
Description Energy to IS break bonds is more tha renergy release to form bonds Energy to break bonds is less than energy release to form bonds
Which type of reaction is represented by B?
Answer: Exothermic
Explanation: The energy of the reactants is leass than that of the products. Conservation of energy means that the excess is given off, or exothermic.
Which equation represents a decomposition reaction?
O 4P +502 → 2P205
O H2SO4 + 2NaOH → Na2SO4 + 2H2O
O 2C8H18 + 2502 → 16CO2 + 18H2O
O 6NaNO3 → 6NaNO2 + 302
There are various type of chemical reactions in chemistry like combination reaction , displacement reaction. One of these is the decomposition reaction. The correct option is option D.
What is decomposition reaction?Decomposition reaction is the one in which molecules breaks down in its constituent in presence of energy. Energy can be in any form, it can be light energy , heat energy.
Decomposition of water is done by providing electricity and the reaction is called electrolysis. Lysis means to break. To give decomposition reaction molecule must have more than one element.
The fourth reaction describe a decomposition reaction (NaNO3 decomposed to become NaNO2 and O2). First and third reaction are considered combustion reaction (reacting with oxygen). Second reaction is acid-base reaction.
Therefore, the correct option is option D.
To learn more about decomposition reaction, here:
https://brainly.com/question/13134296
#SPJ2
what is force ?write its effects.
Answer:A force is a push or pull upon an object resulting from the object's interaction with another object.
A force acting on an object causes the object to change its shape or size, to start moving, to stop moving, to accelerate or decelerate
Comparison between availability of food & population in current scenario.
In UAE.
(10-marks)
100-200 words please
Answer:
Answer is in the attachment
hope it's helpful
Nhiệt phân hoàn toàn 1,88g Cu(NO3)2.Khí bay ra cho hấp thụ vào H2O tạo thành 2 l dd A. Dd A có pH= ?
Answer: theo mình thì mình làm như sau
cu(no3)2 nhiệt phân hết
\Rightarrow nNO2= 0,02mol
nO2=0,005mol
khi hấp thụ O2 và NO2 vào nước ta có
2NO2 + 1/2 O2\Rightarrow 2HNO3
phản ứng là vừa đủ nên
nHNo3= 0,02 mol
pH HNO3=2
khi cho 0,001mol NaOH vào thì phản ứng trung hòa
H+ + OH- \Rightarrow H20
nHNO3=0,02/20=0,001
nhận thấy nH+ =nOH- nên phản ứng vừa đủ
pH của dd Y=7
theo mình giải là như vậy
Explanation:
What causes the pressure inside oxygen tanks to change as they are filled?
A. The volume of the container changes.
B. The temperature of the gas changes.
C. The number of gas molecules changes.
D. The pressure outside the tanks changes.
Answer:
the answer is the number of gas molecules changes.
How would you calculate the density of an object?
mass/volume
mass * volume
mass/area
weight/mass
Answer:
Mass/Volume
Explanation:
Answer:
[tex]{ \sf{density = \frac{mass}{volume} }}[/tex]
electrolysis of aqueous copper(2) sulfate half ionic equation
Answer:
Copper is less reactive than hydrogen, so copper (Cu) is produced at the negative electrode. The half equation is: Cu2+ + 2e- → Cu
The hydroxide ion is more reactive than the sulphate ion, therefore this forms water (H2O) and oxygen at the positive electrode.
What is the signifcence of H, 2H, 3 H, H2, 2 He, Na,
Snaco, ouco, CO, 460?
H=hydrogen,H2=hydrogen atoms,
Which of the following would electrolysis NOT be used for?
A. Producing electricity
B. Extracting reactive metals
C. Plating metals onto other metals
D. Producing hydrogen gas
Answer:
D
Explanation:
Please mark me as brainlyest
Producing hydrogen gas. Hence, option D is correct.
What is electrolysis?Electrolysis is described by two half-reactions. These half reaction are the oxidation half-reaction and reduction half-reaction.
Electrolysis involves the transfer of electrons. Each half reaction is characterized by the loss or gain of electrons.
The only reason why producing hydrogen gas is not used most of the time is because electrolysis has very low efficiency, most of the energy finishes up being converted to heat and 95% of the hydrogen is produced by steam reforming.
Hence, option D is correct.
Learn more about electrolysis here:
https://brainly.com/question/12054569
#SPJ5