A small candle is 37cm from a concave mirror having a radius of curvature of 22cm .
What is the focal length of the mirror? Follow the sign conventions.

Answers

Answer 1

The focal length of the concave mirror is -37cm.To find the focal length of the concave mirror, we need to apply the mirror formula. The formula is: 1/f = 1/v + 1/u

Where f is the focal length, v is the image distance, and u is the object distance. According to the sign conventions, u is negative because the object is in front of the mirror, and v is negative because the image is formed behind the mirror. We are given u = -37cm and R = -22cm (since the mirror is concave), so we can find the image distance using the relation:

1/f = 1/v - 1/R
1/f = 1/-37 - 1/-22
1/f = -0.027
f = -37c

To know more about focal length visit :-

https://brainly.com/question/31755962

#SPJ11


Related Questions

Mass on a spring: a 0.150-kg cart that is attached to an ideal spring with a force constant (spring constant) of 3.58 n/m undergoes simple harmonic oscillations with an amplitude of 7.50 cm. what is the total mechanical energy of the system? mass on a spring: a 0.150-kg cart that is attached to an ideal spring with a force constant (spring constant) of 3.58 n/m undergoes simple harmonic oscillations with an amplitude of 7.50 cm. what is the total mechanical energy of the system? a) 0.0101 j b) 0.0201 j c) 0.269 j d) 0.134 j e) 0 j

Answers

The total mechanical energy of the mass on a spring system with a 0.150-kg cart attached to an ideal spring with a force constant of 3.58 N/m and an amplitude of 7.50 cm is option c) 0.269 J. the potential energy and kinetic energy of the find the total mechanical energy.



The frequency can be found using the formula f = 1/T, where T is the period of the oscillation. The period is the time it takes for the cart to complete one full oscillation, which is equal to the time it takes for it to travel from the maximum displacement on one side to the maximum displacement on the other side and back again. This time is equal to twice the time it takes for the cart to travel from the equilibrium position to the maximum displacement on one side, which is given

this is only the mechanical energy at the equilibrium position. As the cart oscillates, the potential energy and kinetic energy will vary, but their sum will remain constant. So the total mechanical energy of the system is actually equal to the initial mechanical energy, which is 0.0101 J + 0.0349 J = 0.045 J Convert amplitude from cm to Amplitude = 7.50 cm = 0.075 m : Use the formula for total mechanical energy of a mass-spring system Total Mechanical Energy (E) = (1/2) * k * A^2 Where k is the spring constant (3.58 N/m) and A is the amplitude (0.075 m). Plug in the values and calculate the energy E = (1/2) * 3.58 N/m * (0.075 m)^2 E = 0.010125 J 0.0101 J, the total mechanical energy of the system is approximately 0.0101 J.

To know more about mechanical energy Visit;

https://brainly.com/question/29408366

#SPJ11

the preset wavelength is the wavelength, in nanometers, where absorbance is smallest. (true or false)

Answers

The statement that the preset wavelength is the wavelength, in nanometers, where absorbance is smallest is incorrect.

The term "preset wavelength" typically refers to a specific wavelength at which a measurement or analysis is conducted. It is not necessarily the wavelength where absorbance is smallest.

Absorbance is a property that can vary with wavelength, and the wavelength at which absorbance is smallest is known as the "minimum absorbance wavelength" or "peak transmittance wavelength."

This wavelength can vary depending on the specific substance and its molecular structure. The preset wavelength, on the other hand, is a wavelength chosen for a particular experiment or measurement, often based on the specific characteristics or properties being investigated, and may not necessarily correspond to the wavelength of minimum absorbance.

Therefore, the preset wavelength and the wavelength of minimum absorbance are not necessarily the same.

Learn more about wavelength here:

https://brainly.com/question/30532991

#SPJ4

a ray of light that is traveling through air strikes a piece of glass with an angle of incidence of 39o. what is the angle of refraction in the glass? use the simulation to check your answer.

Answers

The angle of refraction in the glass can be calculated using Snell's Law. Given an angle of incidence of 39°, the angle of refraction is approximately 25.5°.

To find the angle of refraction, we need to use Snell's Law, which is n1 * sin(θ1) = n2 * sin(θ2), where n1 and n2 are the indices of refraction of the two media (air and glass), and θ1 and θ2 are the angles of incidence and refraction, respectively.
Assuming the index of refraction for air is approximately 1 and for glass is 1.5, we can substitute the values into the equation:
1 * sin(39°) = 1.5 * sin(θ2)
Now, divide both sides by 1.5:
sin(39°)/1.5 = sin(θ2)
Next, find the inverse sine of the result to get θ2:
θ2 = arcsin(sin(39°)/1.5)
θ2 ≈ 25.5°
Thus, the angle of refraction in the glass is approximately 25.5°.

Learn more about Snell's Law here:

https://brainly.com/question/8757345

#SPJ11

an object's moment of inertia is 1.90 kgm2 . its angular velocity is increasing at the rate of 3.80 rad/s2 .What is the net torque on the object?

Answers

The net torque on the object is 7.22 Nm.

You can use the following formula to determine the amount of net torque an object has:

Moment of Inertia (I) multiplied by Angular Acceleration () equals the Net Torque ().

If we know the value of the moment of inertia, I, which is 1.90 kgm2, and the angular acceleration,, which is 3.80 rad/s2, then we can plug those numbers into the formula as follows:

τ = [tex]1.90 kgm^2 * 3.80 rad/s^2[/tex]

In order to calculate the product,

τ = 7.22 Nm

Therefore, the net torque on the object is 7.22 Nm.

Learn more about Torque, here:

https://brainly.com/question/30338175

#SPJ1

a hollow sphere of inner radius 8 cm and outer radius 9 cm floats half submerged in a liquid of density 800 kg/m3 what is the mass of the sphere? what is the density of the material of which the sphere is made?

Answers

Mass of the sphere is 2.68 kg and density of the material is 1290 kg/m3.


The buoyant force acting on the sphere is equal to the weight of the displaced liquid. Since the sphere is half submerged, the volume of the displaced liquid is equal to half the volume of the sphere. Using the formula for the volume of a hollow sphere, we get V = (4/3)π(9^3 - 8^3) = 468π/3 cm3. The weight of the displaced liquid is therefore 468π/3 × 800 × 10^-6 = 0.939 kg.
Since the sphere is in equilibrium, the weight of the sphere is equal to the buoyant force. Using the formula for the volume of the sphere, we get V = (4/3)π(9^3) - (4/3)π(8^3) = 168π cm3. The weight of the sphere is therefore 168π × 1290 × 10^-6 = 2.68 kg.
Thus, the mass of the sphere is 2.68 kg and the density of the material is 1290 kg/m3.

Learn more about buoyant force here:

https://brainly.com/question/7379745

#SPJ11

Trying to determine its depth, a rock climber drops a pebble into a chasm and hears the pebble strike the ground 3.16 s later. (a) If the speed of sound in air is 343 m/s at the rock climber's location, what is the depth of the chasm?____ m (b) What is the percentage of error that would result from assuming the speed of sound is infinite? __%

Answers

(a) The depth of the chasm can be calculated using the equation: depth = (speed of sound) × (time elapsed) / 2.

Given that the speed of sound in air is 343 m/s and the time elapsed is 3.16 s, we can calculate the depth as follows:

depth = (343 m/s) × (3.16 s) / 2 ≈ 542.476 m.

Therefore, the depth of the chasm is approximately 542.476 m.

(b) To calculate the percentage of error resulting from assuming the speed of sound is infinite, we can compare the actual time taken with the assumed time if the speed of sound were infinite.

The assumed time, t_assumed, would be equal to the depth of the chasm divided by the assumed infinite speed of sound (which is not a physical value). Let's denote the depth as d and the actual time taken as t_actual.

t_assumed = d / (speed of sound assumed infinite)

The percentage of error, %error, can be calculated using the formula:

%error = (|t_assumed - t_actual| / t_actual) × 100.

In this case, t_actual is 3.16 s as given.

Assuming the speed of sound is infinite, we have:

t_assumed = d / (speed of sound assumed infinite) = d / ∞ = 0.

Hence, the percentage of error would be:

%error = (|0 - 3.16| / 3.16) × 100 ≈ 100%.

Therefore, assuming the speed of sound is infinite would result in a 100% error in calculating the time and consequently the depth of the chasm.

Learn more about speed of sound here:

https://brainly.com/question/15381147

#SPJ11

Final answer:

To determine the depth of the chasm, we use the equation v = d/t. The depth of the chasm is calculated to be 1084.48 meters. It is not possible to calculate the percentage of error when assuming the speed of sound is infinite.

Explanation:

To determine the depth of the chasm, we can use the equation v = d/t, where v is the velocity of sound, d is the depth of the chasm, and t is the time it takes for the sound to reach the climber. Rearranging the equation, we have d = v x t. Given that the speed of sound is 343 m/s and the time it takes for the sound to reach the climber is 3.16 s, we can calculate the depth of the chasm as follows:



d = (343 m/s) x (3.16 s) = 1084.48 m



Therefore, the depth of the chasm is 1084.48 meters.



To calculate the percentage of error that would result from assuming the speed of sound is infinite, we can use the formula:



Percentage of error = [(actual value - assumed value) / actual value] x 100%



In this case, the assumed value would be infinity. Since the actual value is 343 m/s, the formula becomes:



Percentage of error = [(343 m/s - ∞) / 343 m/s] x 100%



However, dividing by infinity is undefined, so we cannot calculate the percentage of error in this case.

Learn more about Speed of sound here:

https://brainly.com/question/35989321

#SPJ12

a girl attempts to swim directly across a stream 15 meters wide. when she reaches the other side, she notices she also drifted 15 meters downstream. the magnitude of her displacement is closest to...

Answers

The girl's displacement can be found using the Pythagorean theorem. The distance she swam directly across the stream is the horizontal component of her displacement, which is 15 meters.

The distance she drifted downstream is the vertical component of her displacement, which is also 15 meters. Therefore, the magnitude of her displacement is the square root of (15^2 + 15^2) = 21.2 meters (rounded to the nearest tenth).

The Pythagorean theorem is a fundamental principle in mathematics that relates the lengths of the sides of a right triangle. It states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides.

Mathematically, the Pythagorean theorem can be expressed as:

a² + b² = c²

where

"a" and "b" represent the lengths of the two sides (legs) of the right triangle.

"c" represents the length of the hypotenuse.

To know more about Pythagorean theorem, visit:

https://brainly.com/question/14930619

#SPJ11

A typical asteroid has a density of about 2500 kg/m3. Use your result from part (a) to estimate the radius of the largest asteroid from which you could reach escape speed just by jumping.

Answers

To estimate the radius of the largest asteroid from which you could reach escape speed just by jumping, we need to consider the gravitational potential energy and kinetic energy involved.

Escape speed refers to the minimum speed required for an object to escape the gravitational pull of a celestial body. The escape speed can be calculated using the formula:

Escape speed (v) = √(2GM/r)

Where G is the gravitational constant (approximately 6.67430 × 10^-11 m³/(kg·s²)), M is the mass of the celestial body, and r is its radius.

In this case, we are assuming that reaching escape speed just by jumping means imparting enough kinetic energy to overcome the gravitational potential energy. Therefore, the initial kinetic energy is equivalent to the change in gravitational potential energy.

The gravitational potential energy (PE) is given by the formula:

PE = -GMm/r

Where m is the mass of the jumping object and r is the radius of the celestial body.

To reach escape speed, the kinetic energy (KE) must be equal to the absolute value of the gravitational potential energy:

KE = |PE|

Since both the gravitational potential energy and kinetic energy involve mass (m), we can cancel out the mass in the equation.

GM/r = v²/2

Simplifying the equation, we get:

r = GM/v²

Substituting the known values, with the assumption that the mass of the jumping object is negligible compared to the mass of the asteroid, and the escape speed is equal to the speed achieved by jumping, we have:

r = (6.67430 × 10^-11 m³/(kg·s²)) * (2500 kg/m³) / v²

The value of v² is the square of the escape speed achieved by jumping. However, the specific value of this speed is not provided, so we cannot provide a numerical estimate for the radius of the largest asteroid from which you could reach escape speed just by jumping.

learn more about "potential energy":- https://brainly.com/question/21175118

#SPJ11

For a concentration cell, the standard cell potential is always:
Select the correct answer below:
a. positive.
b. negative.
c. zero.
d. need more information.

Answers

A concentration cell is a type of electrochemical cell in which the same electrode material is used as both the anode and cathode, but the concentrations of the reactants or products are different in each half-cell.

The correct  answer is: c. zero.

In a concentration cell, the standard cell potential is always zero because there is no net driving force for electron transfer since both electrodes are identical in composition and potential. However, there will be a non-zero voltage if the concentrations of the solutions are different, which can cause a flow of electrons from the more concentrated half-cell to the less concentrated half-cell until equilibrium is reached.

A concentration cell is an electrochemical cell where the two electrodes are made of the same material and are immersed in solutions with different concentrations. The standard cell potential, denoted as E°, is the difference in potential between the two half-cells under standard conditions (1 M concentration, 1 atm pressure, and 25°C temperature). In a concentration cell, both half-cells have the same standard reduction potential, so their difference (E°) will be zero.

To know more about electrochemical visit:

https://brainly.com/question/12034258

#SPJ11

While operating a personal watercraft, the engine shuts off and. a. you can still maneuver the vessel b. you lose the ability to steer and the vessel will continue to move in the direction you were going c. you lose the ability to steer and the vessel quickly comes to a full stop d. the vessel will slow down and start going in a circle

Answers

If the engine of a personal watercraft suddenly shuts off, the answer to what happens next depends on the specific circumstances. In some cases, the operator may still be able to maneuver the vessel even with the engine off. This could be the case if the watercraft has enough momentum and direction to glide along without the engine.

However, in other cases, losing the engine may mean losing the ability to steer the vessel. This could result in the watercraft continuing to move in the direction it was going before the engine stopped. In this situation, the operator would have to rely on other methods to slow down or stop the vessel, such as using a manual kill switch or turning off the fuel supply.

Alternatively, if the engine fails completely and suddenly, the watercraft could come to a full stop fairly quickly, leaving the operator without any ability to steer. It is also possible that the vessel could slow down and start moving in a circular pattern, depending on factors like wind, waves, and current.

Ultimately, the key to staying safe while operating a personal watercraft is to be prepared for all scenarios and to have the necessary skills and equipment to handle unexpected situations like engine failure.

When operating a personal watercraft, if the engine shuts off, the correct answer is (b). You lose the ability to steer and the vessel will continue to move in the direction you were going. When the engine stops, the watercraft loses propulsion, which means there is no thrust being generated to move it forward or change its direction. As a result, the personal watercraft will continue to coast along the same path due to its momentum, making it difficult to steer or control. To regain control and steer the vessel, you need to restart the engine and generate enough thrust to maneuver effectively.

To know more about Momentum and the directions visit

https://brainly.com/question/31751344

SPJ11

14-2 0.55 pts what was discovered as a direct result of thomson's experiments with gas discharge tubes? select one:

Answers

Thomson's experiments with gas discharge tubes led to the discovery of the electron, a negatively charged subatomic particle.

This finding was a direct result of his work with cathode ray tubes, which showed that these rays were made of negatively charged particles. This discovery significantly contributed to our understanding of atomic structure.

Thomson observed that the gas in the tubes emitted rays that originated from the cathode (negative electrode) and traveled towards the anode (positive electrode). These rays, now known as cathode rays, exhibited certain properties that led Thomson to propose the existence of a new particle called the electron. Thomson conducted further experiments to study the properties of cathode rays. He found that the rays were deflected by electric and magnetic fields, indicating that they carried a negative charge. By measuring the extent of the deflection, Thomson was able to determine the charge-to-mass ratio of the electron.

To know more about magnetic fields, visit:

https://brainly.com/question/14848188

#SPJ11

consider a spring, as described above, that has one end fixed and the other end moving with speed v . assume that the speed of points along the length of the spring varies linearly with distance l from the fixed end. assume also that the mass m of the spring is distributed uniformly along the length of the spring. calculate the kinetic energy of the spring in terms of m and v . (hint: divide the spring into pieces of length dl ; find the speed of each piece in terms of l , v , and l ; find the mass of each piece in terms of dl , m , and l ; and integrate from 0 to l . the result is not 12mv2 , since not all of the spring moves with the same speed.)

Answers

The kinetic energy of the spring is (1/2) times the product of its mass (m) and the square of the speed (v).

The kinetic energy of the spring can be calculated by dividing it into small pieces along its length and summing up the kinetic energies of each piece.

Consider a small element of the spring with length dl located at distance l from the fixed end. The speed of this element can be found using the given linear relationship:

v(l) = (v/l) * l

where, v(l) is the speed of the element at distance l and v is the speed of the moving end of the spring.

The mass of this element can be calculated based on the uniform distribution of mass:

dm = (m/l) * dl

where, dm is the mass of the element and m is the total mass of the spring.

The kinetic energy of each element can be calculated as:

dKE = (1/2) * dm * v(l)^2

Substituting the expressions for dm and v(l):

dKE = (1/2) * (m/l) * dl * [(v/l) * l]^2

Simplifying:

dKE = (1/2) * (m/l) * dl * (v^2)

To find the total kinetic energy of the spring, we integrate this expression from 0 to l:

KE = ∫(0 to l) (1/2) * (m/l) * dl * (v^2)

Integrating with respect to dl:

KE = (1/2) * (m/l) * (v^2) * ∫(0 to l) dl

KE = (1/2) * (m/l) * (v^2) * [l] (evaluated from 0 to l)

KE = (1/2) * (m/l) * (v^2) * l

Simplifying:

KE = (1/2) * m * v^2

Therefore, the kinetic energy of the spring in terms of mass (m) and speed (v) is given by (1/2) * m * v^2.

The kinetic energy of the spring is (1/2) times the product of its mass (m) and the square of the speed (v).

To know more about spring visit:

https://brainly.com/question/23885190

#SPJ11

How do the work-energy and impulse-momentum theorems relate to the principles of energy and momentum conservation? Explain the role of the system versus the environment, and consider what these theorems imply if we consider the universe to be the system.

Answers

The work-energy theorem and the impulse-momentum theorem are fundamental principles in physics that describe the relationships between energy, momentum, work, and forces. These theorems are closely related to the principles of energy and momentum conservation.

Work-Energy Theorem: The work-energy theorem states that the work done on an object is equal to the change in its kinetic energy. Mathematically, it can be expressed as W = ΔKE. This theorem highlights the relationship between the work done on an object and the resulting change in its energy.

Impulse-Momentum Theorem: The impulse-momentum theorem states that the change in momentum of an object is equal to the impulse applied to it. Mathematically, it can be expressed as Δp = J, where Δp is the change in momentum and J is the impulse.

In terms of conservation principles, the work-energy theorem is closely related to the principle of energy conservation, while the impulse-momentum theorem is closely related to the principle of momentum conservation.

Learn more about Work-Energy Theorem from

https://brainly.com/question/22236101

#SPJ11

two masses are connected by a string which passes over a pulley with negligible mass and friction. one mass hangs vertically and one mass slides on a 30.0 degree frictionless incline. the vertically hanging mass is 3.00 kg and the mass on the incline is 6.00 kg. the magnitude of the acceleration of the 3.00 kg mass is

Answers

The magnitude of the acceleration of the 3.00 kg mass is 6.54 m/s².

Since the system is connected by a string passing over a pulley, both masses have the same acceleration. We can find the acceleration by analyzing the forces acting on the masses. For the 3.00 kg mass, the only force acting on it is its weight, which is 29.4 N (3.00 kg x 9.8 m/s²).

For the 6.00 kg mass, its weight component acting parallel to the incline is 58.8 N (6.00 kg x 9.8 m/s² x sin(30°)). Since there is no friction, there is no force acting perpendicular to the incline. Using Newton's second law, we can set up an equation: 29.4 N = (6.00 kg x 9.8 m/s²)sin(30°) - T, where T is the tension in the string.

Solving for T, we get 48.5 N. Since both masses have the same acceleration, we can use the equation F = ma and plug in the values we found for T and the 3.00 kg mass's weight. Solving for a, we get 6.54 m/s².

Learn more about tension here:

https://brainly.com/question/30037765

#SPJ11

. the red light emitted by a ruby laser has a wavelength of 694.3 nm. what is the difference in energy between the initial state and final state corresponding to the emission of the light?

Answers

The energy difference between the initial and final states can be calculated using the formula E = hc/λ.

The wavelength of light is related to the energy of the photon according to the Planck's law.

Where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength. Substituting the given values, we get E = (6.626 x 10^-34 J s x 3 x 10^8 m/s)/(694.3 x 10^-9 m) = 2.85 x 10^-19 J. This means that the transition from the initial state to the final state releases energy of 2.85 x 10^-19 J, which corresponds to the emission of the red light by the ruby laser.

To know more about energy difference visit :-

https://brainly.com/question/20513712

#SPJ11

Compare the gravitational potential energy when the particle is launched to the potential energy when the particle is at the peak of its trajectory: a) they are equal b) the potential energy at the peak is greater than the gravitational potential energy when launched c) the gravitational potential energy when launched is greater than the potential energy at the peak d) it depends on the mass of the particle

Answers

The gravitational potential energy when launched is greater than the potential energy at the peak.  we can explain that gravitational potential energy is the energy possessed by an object due to its position in a gravitational field. When a particle is launched upwards,

the gravitational potential energy at the peak is still less than the potential energy when the particle was launched. This is because the gravitational potential energy is directly proportional to the height from the reference point (usually the ground). At the peak of the trajectory, the particle has a greater distance from the ground and hence a higher potential energy. But at the same time, it also has a lower distance from its starting point, and therefore, a lower potential energy compared to when it was launched.


When the  particle is launched, it has an initial height (h1), and when it reaches the peak of its trajectory, it has a final height (h2).  Since the particle has risen to the peak of its trajectory, it's clear that h2 > h1. GPE1 = m * g * h1 (at launch) are   GPE2 = m * g * h2 (at peak) As h2 > h1 and mass (m) and gravity (g) remain constant, it is evident that GPE2 > GPE1. Therefore, the potential energy at the peak is greater than the gravitational potential energy when launched.

To know more about gravitational Visit;

https://brainly.com/question/3009841

#SPJ11

which part of an optical microscope contains a magnifying lens

Answers

In an optical microscope, the magnifying lens is located in the objective lens, which is located close to the specimen being observed. The objective lens is responsible for gathering light from the specimen and focusing it to form an image. The image is then magnified further by the eyepiece lens, which is located at the opposite end of the microscope. Together, the objective lens and the eyepiece lens produce a magnified image of the specimen that can be observed and studied. The quality of the objective lens is crucial for obtaining a clear and sharp image, and it is often the most expensive component of an optical microscope.
The part of an optical microscope that contains a magnifying lens is the objective lens. An optical microscope typically has multiple objective lenses mounted on a rotating turret, allowing for a range of magnification options. These lenses work together with the eyepiece lens to provide the magnified view of the sample being observed.

Here's a step-by-step explanation of how an optical microscope works:

1. Place the sample on the microscope stage and secure it with stage clips.
2. Select the desired objective lens by rotating the turret.
3. Adjust the focus using the coarse and fine focus knobs.
4. Light from the microscope's illumination source passes through the condenser lens and onto the sample.
5. The light then travels through the sample, with some parts of the sample either reflecting, absorbing, or transmitting the light.
6. The transmitted light continues through the objective lens, which magnifies the image of the sample.
7. The magnified image then passes through the body tube of the microscope and reaches the eyepiece lens.
8. The eyepiece lens provides further magnification and focuses the image onto your eye or camera, allowing you to observe the magnified sample.

By using different objective lenses, you can achieve various levels of magnification to examine samples at different scales. Optical microscopes are essential tools in many fields, including biology, geology, and materials science.

To know more about optical microscope visit

https://brainly.com/question/14009956

SPJ11

in quantum mechanics a node (nodal surface or plane) is the_

Answers

In quantum mechanics, a node (nodal surface or plane) is the region or surface where the wave function of a particle or system of particles equals zero. It represents a point of zero probability density for finding the particle at that specific location.

Nodes are significant because they define the spatial distribution and behavior of the wave function. The number and arrangement of nodes determine the energy levels and shapes of atomic orbitals, as well as the allowed electron configurations and properties of molecules

For example, in the case of atomic orbitals, the wave functions describe the probability distribution of finding an electron in a specific region around the atomic nucleus. The nodes in these wave functions create distinct regions of zero electron density, which contribute to the overall shape and characteristics of the orbitals.

Nodes play a fundamental role in understanding the wave nature of particles and the quantum mechanical behavior of systems. They provide insights into the spatial distribution and behavior of wave functions, allowing us to predict and explain various properties and phenomena in the quantum realm.

Learn more about wave function here:

https://brainly.com/question/32239960

#SPJ11

Assume hydrogen atoms in a gas are initially in their ground state.
If free electrons with kinetic energy 12.75 eV
collide with these atoms, what photon wavelengths will be emitted by the gas?
Express your answer using four significant figures. If there is more than one answer, enter each answer in ascending order separated by a comma.

Answers

The emitted photon wavelengths will be 97.37 nm, 97.72 nm, 97.79 nm, and 97.87 nm.

Determine the emitted photon wavelengths?

When free electrons with kinetic energy collide with hydrogen atoms in their ground state, they can excite the atoms to higher energy levels. As the excited atoms return to their ground state, they emit photons with specific wavelengths.

To calculate the emitted photon wavelengths, we can use the energy difference between the excited state and the ground state. The energy of a photon is given by E = hc/λ, where E is the energy, h is Planck's constant, c is the speed of light, and λ is the wavelength.

The energy difference between the ground state and the first excited state in hydrogen is known to be 10.2 eV. Since the incoming electrons have a kinetic energy of 12.75 eV, the excess energy of 2.55 eV is available for photon emission.

To find the corresponding wavelength, we convert the excess energy into joules and then use the energy-wavelength relationship. The calculation results in wavelengths of 97.37 nm, 97.72 nm, 97.79 nm, and 97.87 nm.

To know more about hydrogen, refer here:

https://brainly.com/question/28937951#

#SPJ4

the video shows a collapsing cloud of interstellar gas, which is held together by the mutual gravitational attraction of all the atoms and molecules that make up the cloud. as the cloud collapses, the overall force of gravity that draws the cloud inward blank because 1 of 2target 2 of 2

Answers

The main answer to your question is that the overall force of gravity that draws the cloud inward increases as the cloud collapses. However, for a more long answer and explanation, we can dive deeper into the physics behind this phenomenon.

In a collapsing cloud of interstellar gas, each atom and molecule within the cloud experiences a gravitational force due to all the other atoms and molecules around it. As the cloud collapses, this force of gravity becomes stronger and stronger because the particles are moving closer together. This increase in gravitational force causes the cloud to collapse even further, which in turn increases the force of gravity even more.


The collapsing cloud of interstellar gas is held together by the mutual gravitational attraction of all the atoms and molecules that make up the cloud. As the cloud collapses, the overall force of gravity that draws the cloud inward increases because the particles in the cloud are getting closer to each other. This causes the gravitational force between the particles to become stronger, following the inverse square law, which states that the gravitational force between two objects is inversely proportional to the square of the distance between them. In simpler terms, as the distance between the particles decreases, the gravitational force between them increases, causing the cloud to collapse further.

To know more about  increases Visit;

https://brainly.com/question/2285058

#SPJ11

The volume flow rate through a water hose is the volume of water per time that flows out of the hose. Suppose water is flowing at a volume flow rate of 1000 cm/s (cubic centimeters per second). What is the volume flow rate in m/hr (cubic meters per hour? Enter the numerical answer without units.

Answers

The volume flow rate in m/hr is 36 (without units).

To convert from cubic centimeters per second to cubic meters per hour, we need to first convert cubic centimeters to cubic meters and seconds to hours. There are 100 centimeters in a meter, so 1 cubic meter is equal to (100 cm)^3 = 1,000,000 cubic centimeters. There are 3,600 seconds in an hour.
So, the volume flow rate in m/hr can be calculated as follows:
1000 cm/s x (1 m/100 cm)^3 x (3600 s/1 hr) = 36 cubic meters per hour.

To know more about volume visit :-

https://brainly.com/question/28058531

#SPJ11

the human eye can response to as little as 10-18 j of light energy. for a wavelength near the peak of visual sensitivity, 550 nm, what is the minimum number of photons that lead to an observable flash? (be sure to round up, and submit your answer without units.)

Answers

we need to round up, the minimum number of photons that lead to an observable flash is 3. The human eye can respond to as little as 10^-18 joules of light energy. To find the minimum number of photons that lead to an observable flash at a wavelength of 550 nm, we need to first calculate the energy of a single photon.


We can use the equation E = hc/λ, where E is the energy of the photon, h is Planck's constant (6.63 x 10^-34 Js), c is the speed of light (3 x 10^8 m/s), and λ is the wavelength (550 x 10^-9 m).
E = (6.63 x 10^-34 Js)(3 x 10^8 m/s) / (550 x 10^-9 m) = 3.61 x 10^-19 J
Now, we can divide the minimum observable energy (10^-18 J) by the energy of a single photon to find the minimum number of photons:
Number of photons = (10^-18 J) / (3.61 x 10^-19 J/photon) = 2.77

To know more about photons visit :-

https://brainly.com/question/29409292

#SPJ11

Before you drive to school, the pressure in your car tire is 3 atm at 20°C. At the end of the trip
to school, the pressure gauge reads 3.2 atm. What is the new temperature in Kelvin of air inside the
tire?

Answers

In this case, we have:
P1 = 3 atm
V1 = Unknown (volume doesn't affect temperature change in this case)
T1 = 20°C + 273.15 (to convert to Kelvin)
P2 = 3.2 atm
V2 = Unknown (volume doesn't affect temperature change in this case)
T2 = Unknown (what we need to find)

Let's plug in the values into the combined gas law equation and solve for T2:

(3 atm × V1) / (20°C + 273.15 K) = (3.2 atm × V2) / T2

Since the volume is constant in this scenario, we can simplify the equation to:

3 / (20 + 273.15) = 3.2 / T2

Now we can solve for T2 by cross-multiplying:

3 × T2 = (20 + 273.15) × 3.2

T2 = (20 + 273.15) × 3.2 / 3

Calculating the right side of the equation:

T2 = 293.15 K × 3.2 / 3

T2 ≈ 314.53 K

Therefore, the new temperature in Kelvin of the air inside the tire at the end of the trip to school is approximately 314.53 K.

two stars have the same luminosity but one has a smaller radius than the other. what can you say about them?

Answers

If two stars have the same luminosity but one has a smaller radius than the other, it means that the smaller star must be more dense than the larger star.

This is because the luminosity of a star is determined by its surface temperature and size, while its density is determined by its mass and size. Therefore, the smaller star must have a higher mass than the larger star to compensate for its smaller size and maintain the same luminosity.
Luminosity is directly proportional to the star's surface area (which depends on its radius) and the fourth power of its temperature, as described by the Stefan-Boltzmann Law.

To know more about Stefan-Boltzmann Law, visit:

https://brainly.com/question/31676048

#SPJ11

a rocket engine can accelerate a rocket launched from rest vertically up with an acceleration of 21.4 m/s2. however, after 50.0 s of flight the engine fails. ignore air resistance.
What is the rocket’s altitude when the engine fails?

Answers

The rocket's altitude when the engine fails. To find this answer, we need to use a long answer involving the kinematic equation: h = 0.5 * at^2  where h is the altitude, a is the acceleration, and t is the time. are the Using the given values, we have:

is derived from the kinematic equations of motion and is used to find the displacement or altitude of an object under constant acceleration. In this case, the rocket is accelerating at 21.4 m/s^2 and we are finding its altitude after 50 seconds of flight.

Since the rocket starts from rest and we're ignoring air resistance, the initial_position and initial_velocity are both 0. We are given the acceleration (21.4 m/s²) and the time (50.0 s) when the engine fails. Plug in the values into the equation:altitude = 0 + 0 × 50 + 0.5 × 21.4 × 50^2 0.5 × 21.4 × 50^2: 0.5 × 21.4 × 2500 = 26,750  Add the results to get the final altitude altitude = 0 + 0 + 26,750 = 26,750 meters the rocket's altitude when the engine fails is 26,750 meters.

To know more about acceleration Visit;

https://brainly.com/question/2303856

#SPJ11

You have a hoop of charge of radius R and total charge -Q. You place a positron at the center of the hoop and give it a slight nudge in the direction of the central axis that is normal to the plain of the hoop. Due to the negative charge on the hoop, the positron oscillates back and forth. Place a positron a small distance above the plane of the ring and calculate the period of oscillation.

Answers

To calculate the period of oscillation for the positron in the given scenario, we need to consider the forces acting on it and apply the principles of electromagnetism.

The positron experiences an attractive force toward the negatively charged hoop, resulting in an oscillatory motion. The force between two charges can be determined using Coulomb's law:

F = (k * q1 * q2) / r²,

where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between them.

In this case, the positron experiences an attractive force toward the hoop due to the negative charge. However, as the positron moves closer to the hoop, the force decreases, and it increases as the positron moves away.

The positron undergoes simple harmonic motion, and the period of oscillation can be determined using the formula:

T = 2π * √(m / k),

where T is the period, m is the mass of the positron, and k is the effective spring constant.

In this scenario, we can consider the electrostatic force acting as an effective spring force. The spring constant can be calculated using Hooke's law:

k = -F / x,

where F is the force and x is the displacement from the equilibrium position.

Since the positron oscillates back and forth, the displacement is twice the distance from the center of the hoop to the equilibrium position.

By substituting the appropriate values into the formulas and considering the magnitudes of the forces, we can calculate the period of oscillation for the positron.

Note: The exact numerical values and calculations would depend on specific quantities such as the charge and radius of the hoop, the mass of the positron, and the distance above the plane of the ring. Without these specific values, an exact numerical calculation cannot be provided.

Learn more about simple harmonic motion here:

https://brainly.com/question/30404816


#SPJ11

What does the famous formula E = mc^2 have to do with special
relativity? (a) Nothing; it comes from a different theory.
(b) It is one of the two starting assumptions of special relativity.
(c) It is a direct consequence of the theory, and hence a way of
testing the theory

Answers

(c) It is a direct consequence of the theory, and hence a way of testing the theory.

The famous formula E = mc^2 is a fundamental equation in special relativity. It relates energy (E) to mass (m) and the speed of light (c). According to special relativity, mass and energy are interchangeable, and this equation demonstrates the equivalence between the two.

In special relativity, the theory proposed by Albert Einstein, the speed of light is considered to be a fundamental constant that sets the maximum speed at which information or physical effects can travel. The equation E = mc^2 shows that mass has an inherent energy content, even when it is at rest (rest mass energy), and this energy can be released or converted into other forms.

The equation has been extensively tested and verified through various experiments and observations, such as nuclear reactions and particle accelerators. It provides a way to calculate the energy associated with a given mass or vice versa, and it has significant implications in fields like nuclear physics, astrophysics, and quantum mechanics. Therefore, E = mc^2 is both a fundamental consequence of special relativity and a means to test and validate the theory.

learn more about "theory":- https://brainly.com/question/11555274

#SPJ11

a combination of two identical resistors in series have a equivalent resistance of 10 ohms what is the equivalent resistance of the combination of the same two resistors when connected in parallel

Answers

When two identical resistors are connected in series, the equivalent resistance is the sum of their individual resistances.

Let's assume the resistance of each resistor is R.

In series connection:

Equivalent resistance = R + R = 2R

Now, when the same two resistors are connected in parallel, the equivalent resistance can be calculated using the formula:

1/Equivalent resistance = 1/R + 1/R

Simplifying this expression gives:

1/Equivalent resistance = 2/R

To find the equivalent resistance, we take the reciprocal of both sides:

Equivalent resistance = R/2

Therefore, the equivalent resistance of the combination of the two identical resistors when connected in parallel is R/2.

Learn more about equivalent resistance is the sum of their individual resistances.  from

https://brainly.com/question/31788815

#SPJ11

a golfer strikes a 0.050-kg golf ball, giving it a speed of 70.0 m/s. what is the magnitude of the impulse imparted to the ball?

Answers

The magnitude of the impulse imparted to the golf ball can be determined using the impulse-momentum principle, which states that the impulse experienced by an object is equal to the change in momentum it undergoes.

The momentum of an object can be calculated by multiplying its mass by its velocity.

Given:

Mass of the golf ball (m) = 0.050 kg

Initial velocity of the golf ball (u) = 0 m/s (since it starts from rest)

Final velocity of the golf ball (v) = 70.0 m/s

The change in momentum (Δp) can be calculated as:

Δp = m * (v - u)

Substituting the given values:

Δp = 0.050 kg * (70.0 m/s - 0 m/s)

Δp = 0.050 kg * 70.0 m/s

Δp = 3.50 kg·m/s

Therefore, the magnitude of the impulse imparted to the golf ball is 3.50 kg·m/s.

Learn more about momentum principle here:

https://brainly.com/question/30275950

#SPJ11

The magnitude of the impulse imparted to the golf ball is 3.5 N·s.

Determine the magnitude of the impulse?

Impulse is defined as the change in momentum of an object. The magnitude of impulse can be calculated using the formula:

Impulse = Δp = m * Δv

Where:

Δp is the change in momentum,

m is the mass of the golf ball, and

Δv is the change in velocity.

Given:

Mass of the golf ball, m = 0.050 kg

Initial velocity, v₁ = 0 m/s (assuming the ball was at rest initially)

Final velocity, v₂ = 70.0 m/s

The change in velocity is Δv = v₂ - v₁ = 70.0 m/s - 0 m/s = 70.0 m/s.

Substituting the values into the formula, we get:

Impulse = m * Δv = 0.050 kg * 70.0 m/s = 3.5 N·s.

Therefore, the magnitude of the impulse imparted to the golf ball is 3.5 N·s.

To know more about momentum, refer here:

https://brainly.com/question/30677308#

#SPJ4

calculate the acceleration of a rocket that starts at rest and reaches a velocity of 100 m/s in a time of 11 seconds.

Answers

To calculate the acceleration of the rocket, we can use the formula:

acceleration (a) = change in velocity (Δv) / time taken (t).

In this case, the rocket starts at rest, so the initial velocity (v1) is 0 m/s. The final velocity (v2) is 100 m/s, and the time taken (t) is 11 seconds.

Substituting the values into the formula, we have:

a = (v2 - v1) / t

 = (100 m/s - 0 m/s) / 11 s

 = 100 m/s / 11 s.

Calculating this expression, we find:

a ≈ 9.09 m/s².

Therefore, the acceleration of the rocket is approximately 9.09 m/s².

Hence, the acceleration of the rocket is approximately 9.09 m/s².

Learn more about acceleration here:

https://brainly.com/question/31946450

#SPJ11

Other Questions
Match the diseases to their causative agent groups.A. dinoflagellatesB. AlgaeC. trypanosomesD. AmoebaE. FungiF. ApicomplexansG. MetamonadH. nematode (helminth) Construct a precedence graph for the following programS1: a = x+ Y;S2 : b = 2 + 1; S3 Ca b; S4 : W=C+ 1; 6 Which of the following is not one of the top ten risks captured by Barry Boehm (the creator of the Spiral Model)Group of answer choicesa. Software requirements and user needs never changeb. Personnel shortfallsc. Unrealistic schedules and budgetsd. Shortfalls in externally furnished componentse. Developing the wrong software functionsf. Shortfalls in externally performed tasks the crowding-out effect of expansionary fiscal policy suggests that multiple choice private investment increases at the expense of government spending. saving increases at the expense of investment. government spending increases at the expense of private investment. imports replace domestic production. "In equilibrium, all investment opportunities must offer thesame reward-to-risk ratio." is this statement correct orincorrect? NorepinephrineNeurotransmitter that increases arousal and boosts mood. Scarce during depression and overabundant during mania. we notice a dripping faucet because of which factor of attention? Find the arc length of the following curve on the given interval. x = 8t", y = 12t?, Osts 1/3 Write the definite integral sa f(x) dx as the limit of a Riemann sum. Explain what variables/quantities you are using. A disruptive market change due to freer international trade, just like with new technology, creates tradeoffs in society. Select the two correct examples of this below. a)imports and exports are disrupted by a hurricane on the East Coast b)new jobs are created in an innovative product niche, whereas jobs are lost in outdated areas c)jobs are lost due to US companies relocating abroad to lower costs of production d)foreign companies are dumping low-priced goods on the US markets Can someone help me with this graph? state the number of sets of equivalent hydrogens in each compound and the number of hydrogens in each set. (a) 3-methylpentane (b) 2,2,4-trimethylpentane Is the function below continuous? If not, determine the x values where it is discontinuous. 2-22-1 if f(x) = {21 *S-4 if -4 Which of the following sets are bases of R??1. S, = {(1,0, 0), (1, 1, 0), (1, 1, 1)}.2. S, = {(1, 0, 0), (0, 1, 0), (0, 0, 1), (1, 1, 1)).3. S; = { (1, 1, 0), (0, 1, 1)).4. S4 = {(1, 1, 0), (0, 1, 1), (1, 0, -1)}. choose the molecule or compound that exhibits dispersion forces as its strongest intermolecular force a. nh3 b. ch4 c. s2 d. cf4 Some historians consider the late nineteenth century and early twentieth century to have been crucial decades in the development of Western thought. Which of the following best supports that contention?a.Discoveries in physics introduced the concepts of uncertainty and relativity, which challenged mechanistic models of the universe.b.Christian missionaries introduced strains of relativism into Western thought after encountering cultures with radically different world views.c.Efficiency experts employed scientific methods to regulate the workplace and thereby encouraged faith in economic progress.d.Visual artists inspired by photography made realism the dominant aim of painter and sculptors. deloitte suggests the quality of earnings from the audit perspective should consider all of the following except: multiple choice consider earnings components in relation to the earnings continuum consider large variances in an accounting estimates compared with actual determined amounts understand the sources of earnings be familiar with press coverage regarding financial performance Maximum profit can occur when marginal profit is zero. True O False the process whereby oxygen is depleted by the growth of microorganisms due to excess nutrients in aquatic systems is called - Sciences TEMPERATURE ("C) ESTION 3 HIW table below shows the results of a sturly that investigated the effect of temperature light on the yield of tomatoes in two greenhouses on a farm 31 NSC -10 5 10 15 20 25 30 AVERAGE YIELD OF TOMATOES PER PLANT (kg) HIGH LIGHT LEVELS LOW LIGHT LEVELS 0.5 1.5 Test: Ecosystems 3,0 3,6 3,5 2,5 2,5 5,0 8.5 7.8 6.2 State TWO steps the investigator may have taken into consideration during the planning stage of the investigation.