As a particle moves 12 meters along an electric field of strength of 80 Newtons per Coulomb its electrical potential energy decreases by 5.2 x 10^-18 Joules.

What is the particle charge?







Giving out brainliest please help this is due today.

The statement "the resistivity of a wire is zero when no current is passing through it" is false. The resistivity of a wire is determined by the material the wire is made from and does not change when current is passed through it.

The measure of the resistance of a material to the movement of electrical current is called resistivity. It is calculated by taking the resistance of the object's cross-sectional area and length. The resistance of an object is defined as the ratio of the voltage drop across the object's terminals to the current that passes through it.

The definition of resistivity also implies that it is a property that is constant at a given temperature, and it is a characteristic of the material that is independent of its shape or size. Resistance is a characteristic of an object that depends on its size, shape, and material. It is the inherent opposition of a material to the flow of an electric current through it.

Read more about resistivity :

https://brainly.com/question/17563681

#SPJ11

Answer:

the resistance of the copper wire 20 meters long and with a diameter of 0.05 cm is 0.342 ohms.

Explanation:

To calculate the resistance of the copper wire, we need to use the formula:

R = (ρ * L) / A

where R is the resistance of the wire, ρ is the resistivity of copper, L is the length of the wire, and A is the cross-sectional area of the wire.

The resistivity of copper is 1.68 × 10^-8 Ω·m.

First, we need to calculate the cross-sectional area of the wire:

A = π * (d/2)^2

A = π * (0.05cm/2)^2

A = 0.0019635 cm^2

Note that we converted the diameter from centimeters to meters, since the resistivity is given in ohms per meter.

Now, we can calculate the resistance of the wire:

R = (ρ * L) / A

R = (1.68 × 10^-8 Ω·m * 20m) / 0.0019635 cm^2

R = 0.342 Ω

Therefore, the resistance of the copper wire 20 meters long and with a diameter of 0.05 cm is 0.342 ohms.

Answer:

0.835cm or 1.145cm

Explanation:

We know that in simple harmonic motion, the speed is at its maximum at the equilibrium point (midpoint) and zero at the amplitude. Therefore, we need to find the displacement from the midpoint where the speed is half of its maximum.

Let's start by finding the maximum velocity. We know that the velocity is given by:

v = Aωcos(ωt)

where A is the amplitude, ω is the angular frequency, and t is the time. At the equilibrium point, where the displacement is zero, the velocity is at its maximum. Therefore:

v_max = Aω

Next, we need to find the velocity when the speed is half of v_max. The speed is given by the absolute value of the velocity:

speed = |v| = Aω|cos(ωt)|

When the speed is half of v_max, we have:

Aω|cos(ωt)| = 0.5v_max

Substituting v_max = Aω, we get:

|cos(ωt)| = 0.5

Since the cosine function oscillates between -1 and 1, we have two possible solutions:

cos(ωt) = 0.5 or cos(ωt) = -0.5

Solving for ωt, we get:

ωt = arccos(0.5) = π/3 or ωt = 2π/3

or

ωt = -arccos(0.5) = -π/3 or ωt = -2π/3

We only need to consider the positive solutions, since displacement is always positive. Therefore:

ωt = π/3 or ωt = 2π/3

The displacement corresponding to these times can be found using the equation for displacement in simple harmonic motion:

x = Acos(ωt)

Substituting ωt = π/3, we get:

x = 1.67cos(π/3) = 0.835 cm

Substituting ωt = 2π/3, we get:

x = 1.67cos(2π/3) = 1.145 cm

Therefore, the particle's speed equals one half of its maximum speed at a positive displacement of either 0.835 cm or 1.145 cm from the midpoint of its motion.

The maximum speed at which the car can traverse the curve without slipping is 14.2 m/s.

The maximum speed that a car can traverse an unbanked curve without slipping is determined by the centripetal force acting on the car, which is provided by the force of static friction between the road and the car's tires.

The formula for centripetal force is given by:

F_c = m*v² / r

where Fc is the centripetal force, m is the mass of the car, v is the speed of the car, and r is the radius of the curve.

The maximum speed of the car can be determined by equating the centripetal force to the maximum static friction force:

F_f = μs * m * g

where Ff is the maximum static friction force, μs is the coefficient of static friction, m is the mass of the car, and g is the acceleration due to gravity.

Setting these two equations equal to each other and solving for v, we get:

m*v²/ r = μ_s * m * g

v² = μ_s * g * r

v = [tex]\sqrt{Ms * g * r)}[/tex]

Plugging in the given values, we get:

v = [tex]\sqrt{0.67 * 9.81 m/s^{2} * 50 m)}[/tex]

v = 14.2 m/s

Learn more about the centripetal: https://brainly.com/question/14249440

#SPJ11

The wavelength of the colored light is 4.00 x [tex]10^{-7}[/tex] m, or 4.00 x [tex]10^{-4}[/tex] cm.

The wavelength of a certain colored light with a frequency of about 7.5 x [tex]10^{14}[/tex] Hz can be calculated using the following equation: wavelength (λ) = velocity of light (c) / frequency (f). The velocity of light is a constant, so it is equal to 3.00 x [tex]10^{8}[/tex] m/s.

Plugging the given frequency into the equation, we get: λ = 3.00 x [tex]10^{8}[/tex]  m/s / 7.5 x [tex]10^{14}[/tex] Hz
Solving for wavelength, we get:
λ = 4.00 x [tex]10^{-7}[/tex] m, or 4.00 x [tex]10^{-4}[/tex] cm
This means that the wavelength of the colored light is 4.00 x [tex]10^{-7}[/tex] m, or 4.00 x [tex]10^{-4}[/tex] cm.

To summarize, the frequency of the colored light is 7.5 x [tex]10^{14}[/tex] Hz, and the corresponding wavelength is 4.00 x [tex]10^{-7}[/tex] m, or 4.00 x [tex]10^{-4}[/tex] cm. This can be calculated by using the equation: wavelength (λ) = velocity of light (c) / frequency (f).

For more such questions on Wavelength.

https://brainly.com/question/20462619#

#SPJ11

The brightness of the 3 bulbs compares to each other if a constant potential difference between its terminals at points 1 and 2 is bulb A is brightest compared to B and equal due to sharing current.

From the figure, we know that brightest to leаst bright: А and B/C (B and C аre sаme). B аnd C аre in the sаme brаnch, so they both hаve the sаme current. Since they both hаve the sаme resistаnce, they hаve the sаme power/brightness аs eаch other.

Since B аnd C shаre а voltаge drop equаl to A, they’ll eаch hаve less voltаge thаn A аs well. With less current АND less voltаge thаn A, they’ll both be dimmer thаn A. BC hаs аn equivаlent resistаnce of 1/2 А. This meаns the voltаge drop аcross BC is 1/2 the voltаge аcross А.

Your question is incomplete, but most probably your full question can be seen in the Attachment.

For more information about potential difference refers to the link: https://brainly.com/question/12198573

#SPJ11

The distance between the two bicycles at t=0 is 15.6 meters.

The length of the line connecting two places represents the distance between them. Subtracting the different coordinates will reveal the distance if the two points are on the same horizontal or vertical line. To find the distance between the two bicycles at time t=0, we need to find their positions at that time.

For the first bicycle,

X1 = -6.0 m + (7.5 m/s)t

    = -6.0 + 7.5 × 0

    = -6.0 m.

For the second bicycle,

X2 = 9.6 m + (-4.5 m/s)t

     = 9.6 + (-4.5) × 0

     = 9.6 m.

Therefore, the distance between the two bicycles at time t=0 is:

Distance = X2 - X1

               = 9.6 m - (-6.0 m)

               = 15.6 m

So the distance between the two bicycles at t=0 is 15.6 meters.

To learn more about distance, refer to:

https://brainly.com/question/26550516

#SPJ4

The pressure of a fluid that comes out of a pipe that was closed on both ends, but then is opened up on one end is equal to the atmospheric pressure.

This is because when the pipe was closed, the pressure inside the pipe is equal to the atmospheric pressure outside the pipe. When one end is opened, the pressure inside the pipe is still equal to the atmospheric pressure outside the pipe, so the pressure of the fluid that comes out is equal to the atmospheric pressure.

When a pipe that has been closed on both ends is opened at one end, the pressure of the fluid that comes out of the pipe is given by Bernoulli's principle.

The principle of Bernoulli states that the sum of pressure and kinetic energy per unit volume of an incompressible fluid is constant at all points along a streamline. If the fluid flows through a narrow constriction, the fluid's velocity must increase to maintain the mass flow rate (conservation of mass).

Bernoulli's principle can be represented mathematically as:

P + 1/2ρv² + ρgh = constant

where P is pressure, ρ is density, v is velocity,g is the gravity constant, h is the height

Therefore, the pressure of a fluid that comes out of a pipe that is opened up on one end is equal to the atmospheric pressure.

To know more about atmospheric pressure click here:

https://brainly.com/question/30166820

#SPJ11

The speed of the 2.86 g marble after the collision is 1.05 m/s.

We can use the conservation of momentum to solve this problem:

Before the collision:

m1 = 6.63 g = 0.00663 kg (mass of the first marble)

v1 = 1.41 m/s (velocity of the first marble)

m2 = 2.86 g = 0.00286 kg (mass of the second marble)

v2 = 0 m/s (initial velocity of the second marble)

After the collision:

v1' = 0.86 m/s (final velocity of the first marble)

v2' = ? (final velocity of the second marble)

Using conservation of momentum:

[tex]m1v1 + m2v2 = m1v1' + m2v2'[/tex]

Substituting the known values:

[tex]0.00663 kg * 1.41 m/s + 0.00286 kg * 0 m/s = 0.00663 kg * 0.86 m/s + 0.00286 kg * v2'[/tex]

Solving for v2':

[tex]v2' = (0.00663 kg * 1.41 m/s - 0.00663 kg * 0.86 m/s) / 0.00286 kgv2' = 1.05 m/s[/tex]

Therefore, the speed of the 2.86 g marble after the collision is 1.05 m/s.

To know more about "-  head-on collisions here

https://brainly.com/question/30224237

#SPJ4

Answer:

Explanation:

To solve this problem, we can use the principle of conservation of energy, which states that the initial mechanical energy of the marble (kinetic energy) is equal to its final mechanical energy (potential energy plus kinetic energy), neglecting any losses due to friction:

Initial kinetic energy = Final potential energy + final kinetic energy

1/2 mv^2 = mgh + 1/2 mv_f^2

where m is the mass of the marble, v is its initial speed, h is the height the marble reaches before coming to a stop, and v_f is the final speed of the marble (which is zero in this case).

(a) To find the distance the marble travels up the plane before coming to a stop, we need to find the height h, which we can do by solving the above equation for h:

h = (1/2 v^2)/(g sinθ)

where g is the acceleration due to gravity (9.8 m/s^2) and θ is the angle of inclination of the plane (which is not given in the problem, so we'll assume it's 30 degrees).

Plugging in the given values, we get:

h = (1/2 × 7.0^2)/(9.8 × sin30) = 6.4 m

Therefore, the marble travels 6.4 meters up the plane before coming to a stop.

(b) To find the time it takes the marble to travel up the plane, we can use the kinematic equation:

v_f = v_i + at

where v_i is the initial velocity (7.0 m/s), v_f is the final velocity (zero), a is the acceleration of the marble, and t is the time it takes to travel up the plane.

The acceleration of the marble can be found using the component of gravity along the plane, which is given by:

a = g sinθ

Plugging in the values, we get:

0 = 7.0 + (9.8 sin30)t

Solving for t, we get:

t = (7.0/4.9) sec = 1.4 sec

Therefore, the marble takes 1.4 seconds to travel up the plane.

The speed at which the compact car has the same kinetic energy as the truck going 33 km/h is approximately 170 m/s.

The formula for calculating kinetic energy is K.E. = 1/2 x mass x speed². Therefore, the speed of the compact car is the

[tex]\sqrt{(32266/982)} * 33[/tex]  km/h = 126.46 km/h.

The kinetic energy (KE) of an object is given by the formula:

[tex]KE = 1/2 * m * v^2[/tex]

where m is the mass of the object and

v is its velocity.

We are given the masses and velocities of the compact car and the truck. Let's calculate the kinetic energy of the truck first:

[tex]KE_{(truck)}= 1/2 * m_{truck} * v_{truck}^2[/tex]

[tex]KE_{(truck)}= 1/2 * 32266* (33)^2[/tex] (kg )*(km/h)²

[tex]KE_{(truck)} = 1.42*10^9[/tex] J

Now, let's set the kinetic energy of the car equal to the kinetic energy of the truck and solve for the velocity of the car:

[tex]KE_{(car)} = KE_{truck}[/tex]

[tex]1/2 * m_{(car)} * v_{(car)}^2 = 1.42*10^9[/tex] J

Rearranging the equation, we get:

[tex]v_{(car)}^2 = (2 * KE_{truck}) / m_{(car)}[/tex]

[tex]v_{car}^2 = (2 * 1.42*10^9)/982[/tex]J/kg

[tex]v_{car}^2= 2.89*10^6[/tex] m²/s²

Taking the square root of both sides, we get:

[tex]v_{car} = \sqrt{2.89*10^2}[/tex] m²/s²

[tex]v_{car}[/tex]=170 m/s

Therefore, the speed at which the compact car has the same kinetic energy as the truck going 33 km/h is approximately 170 m/s.

To practice more questions about kinetic energy:

https://brainly.com/question/29763149

#SPJ11

Answer:

Γ = F X R

If the force is right angle to the lever arm then

Γ = F R = 42 N * .17 m = 7.1 N-m

Yes, adding too many fins on a surface can cause the overall heat transfer coefficient and heat transfer to increase.

This is because the presence of fins can increase the surface area available for heat exchange, allowing more heat to be transferred over a given period of time. Fins can also improve the convective heat transfer coefficient and turbulence levels of the surrounding fluid.
When adding fins to a surface, it is important to consider the fin spacing and height to ensure that the fins do not impede the flow of the surrounding fluid. For instance, if the fins are too close together, they can cause an increase in the pressure drop of the fluid and reduce the efficiency of the heat exchange. Likewise, if the fins are too high, they can block the flow of the fluid.
It is also important to consider the type of material used for the fins. Fin materials can affect the thermal conductivity of the fins, which in turn can influence the heat transfer rate. Furthermore, if the fins are made from a material that is not resistant to corrosion, the effectiveness of the fins may be reduced over time.
In summary, adding too many fins on a surface can cause the overall heat transfer coefficient and heat transfer to increase. It is important to consider the fin spacing, height, and material when determining the most efficient fin configuration for a given surface.

For more such questions on heat transfer

https://brainly.com/question/2341645

#SPJ11

The most fundamental stage of studying matter and energy is quantum physics. It aims to comprehend the traits and behaviours of the very substances that make up nature.

According to this theory, the universe of any object transforms into an array of parallel universes with an identical number of possible states for that object, one in each universe. This occurs as soon as the potential for any object to be in any state arises.

By examining the interactions between particles of matter, quantum physicists investigate how the universe functions. This career might suit your interests if you like math or physics.

To know more about quantum physics visit:-

https://brainly.com/question/10430663

#SPJ9

The speed acquired by the body is 49m/s and 59m/s respectively.

The speed can be calculated using the formula:

v= u + gt,  where v= final speed, u= initial speed = 0 for a freely falling body, g= acceleration due to gravity, t= time.

The speed acquired by a freely falling object 5 seconds after being dropped from a rest position is 49 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 5 seconds it will be moving at a speed of 5 * 9.8 = 49 m/s.

The speed 6 seconds after being dropped from a rest position is approximately 59 m/s. This is because an object dropped from rest will accelerate at a rate of 9.8 m/s², so after 6 seconds it will be moving at a speed of 6 * 9.8 = 58.8 m/s.

In summary, the speed of an object dropped from rest 5 seconds after being dropped is 49 m/s, and 6 seconds after it is approximately 59 m/s.

To know more about speed, refer here:

https://brainly.com/question/17661499#

#SPJ11

Thermionic diodes are the most widely used diodes because of their small size and weight, this statement is: false.

While thermionic diodes are still used in some applications, they are not the most widely used diodes.Thermionic diodes work by using the emission of electrons from a heated cathode, which then travel across a vacuum to a cooler anode.

This is also called a vacuum diode. While this technology was the basis for early electronics, it has largely been replaced by semiconductor diodes, which are much smaller, more efficient, and easier to manufacture.

Semiconductor diodes, such as silicon or germanium diodes, are used in a wide variety of applications, including rectifiers, voltage regulators, and switching circuits. They are small and lightweight, making them ideal for use in electronic devices such as cell phones, computers, and other portable electronics.

Additionally, semiconductor diodes have a much longer lifespan than thermionic diodes, making them a more reliable choice. While thermionic diodes may still be used in some specialized applications, such as in high-power vacuum tubes or in some scientific instruments, they are no longer the most widely used diodes.

To know more about electrons refer here:

https://brainly.com/question/1255220#

#SPJ11

The power input to the heat pump is 25 kW.

The COP (coefficient of performance) of the heat pump is 4.0. This means that for every unit of power consumed by the heat pump, it supplies four units of heat to the building.

The rate at which the heat pump supplies heat to the building is 100 kW.

Therefore, the power input to the heat pump can be calculated as:

Power input = Power output / COP

Power input = 100 kW / 4.0

Power input = 25 kW

Hence, the power input to the heat pump is 25 kW.

To know more about power input click here:

https://brainly.com/question/1141300

#SPJ11

Each plate has a charge that is roughly 113.17 pC in size.

According to the equation Q=CV, where Q is the charge in Coulombs, C is the capacitance in Farads, and V is the potential difference between the plates in volts, Both the capacitance and the applied voltage affect how much charge moves into the plates.

We can use the following formula to determine the size of the charge present on each plate of a parallel-plate capacitor:

Q = CV

It is critical to remember that the parallel-plate capacitor's capacitance is determined by:

C = εA/d

It makes use of the free space permittivity (0).

We'll assume that the provided capacitance of 7.9 pF is accurate.

Using the formula Q = CV, we get:

Q = (7.9 pF) x (14.3 V) = 113.17 pC

To know more about charge visit:-

https://brainly.com/question/14713274

#SPJ1

When the whole mass accelerates together as a single entity, the acceleration of the system is 0.62 m/s²

To determine the acceleration of the system, the mass on one end of the rope must be subtracted from the mass on the other end of the rope.

The mass of each child is 30 kg. The number of children is 13.

Therefore, 30 x 13 = 390 kg is the total mass of the children.

The mass of each parent is 60 kg. There are five parents.

So the total mass of the parents is 5 x 60 = 300 kg.

Total mass is the sum of the masses of the parents and children, which is 300 + 390 = 690 kg.

The force applied by the children is 150 N/child, and there are 13 children

So the total force applied by the children is 150 x 13 = 1950 N.

The force applied by the parents is 475 N/adult, and there are five parents, so the total force applied by the parents is 475 x 5 = 2375 N.

The net force is the difference between the forces applied by the children and the forces applied by the parents, which is 425 N to the east (2375 N - 1950 N).

Use the formula F = ma, where F is force, m is mass, and a is acceleration, to determine the acceleration of the system. The formula should be rearranged to solve for acceleration. a = F/m

Substitute the values into the formula:

a = 425 N / 690 kg

acceleration:a = 0.62 m/s²

Therefore, the acceleration of the system is 0.62 m/s².

To know more about acceleration click here:

https://brainly.com/question/30660316

#SPJ11

The method of trying different approaches to solve a problem until one works is called trial and error.

It involves experimenting with different methods or strategies until the correct solution is found. It is a common problem-solving method used in many fields, including physics, mathematics, engineering, and computer science. It can be a time-consuming process, but it can also be an effective way to arrive at a solution when other methods fail.

What is trial and error method?

The trial and error method is a problem-solving strategy that involves experimenting with different solutions or approaches until the correct one is found. This method is commonly used when the problem is complex or the solution is not obvious. The trial and error method involves trying different approaches, observing the results, and adjusting the approach until the desired outcome is achieved. It is often a time-consuming process but can be effective in finding solutions when other methods fail.

To know more about trial and error method, visit:

https://brainly.com/question/4123314

#SPJ1

The time it takes for the ball to reach the ground is 1.63 seconds.
The magnitude of the final velocity of the ball is 17.2 m/s.

To calculate this, we can use the equations of motion for horizontal motion with constant acceleration:

x = x0 + v0t + (1/2)at2

v2 = v02 + 2a(x - x0)

Here, x

is the initial velocity (17.2 m/s), x is the final distance (11.0 m), and a is the acceleration due to gravity (-9.8 m/s).
Substituting in the given values, we get:

11.0 m = 2.0 m + (17.2 m/s)(t) + (-9.8 m/s2)(t2)/2

(17.2 m/s)2 = (17.2 m/s)2 + 2(-9.8 m/s2)(11.0 m - 2.0 m)
Since the initial velocity was directed horizontally, the magnitude of the final velocity is the same as the initial velocity (17.2 m/s).

For such more questions on initial velocity:

brainly.com/question/29110645

#SPJ11

The voltage waveform is more sinusoidal than the current waveform.

This is because the voltage source is assumed to be an ideal source, which means that the voltage is supplied without loss or fluctuation while the current waveform is distorted due to the loads present in the circuit. When a voltage waveform is applied to a circuit with inductance and capacitance, the resulting current waveform will be distorted and will not be sinusoidal. The current waveform is affected by the presence of capacitance and inductance in the circuit, which cause the current to lag behind the voltage. The current waveform becomes more distorted as the load resistance increases.

More on voltage and current waveform: https://brainly.com/question/30054547

#SPJ11

When two marbles of different masses collide, their velocities will change depending on the masses and the collision force. In this case, the 27.8 g marble was traveling to the right at 21.0 cm/s and overtook the 13.9 g marble traveling in the same direction at 11.5 cm/s.

After the collision, the 13.9 g marble moved to the right at 23.9 cm/s. The velocity of the 27.8 g marble after the collision can be calculated by applying the conservation of momentum.

Momentum is the product of mass and velocity, and when two objects collide, the total momentum is conserved. This means that the sum of the momentum of the two marbles before the collision must be equal to the sum of the momentum after the collision.

Thus, the velocity of the 27.8 g marble after the collision can be calculated by subtracting the momentum of the 13.9 g marble after the collision from the momentum of the 27.8 g marble before the collision. The resulting velocity of the 27.8 g marble after the collision is 17.1 cm/s.

Know more about Momentum here

https://brainly.com/question/30487676#

#SPJ11

The work done by the weight lifter is 7260 J.

The weight lifter does 7,260 J of work when lifting the 390-N weights. This is calculated by multiplying the force (390 N) by the distance (1.80 m) that the weights were moved.

W = Fd, where W is work, F is force, and d is distance.

The weight lifter must apply a force to lift the weights. This force is what enables the weight lifter to move the weights from ground level to a position over his head.

The force applied is measured in Newtons, and the distance moved is measured in meters. The work done is measured in joules (J).

The work done by the weight lifter, we need to multiply the force applied (390 N) by the distance moved (1.80 m). So, W = Fd, W = 390 N x 1.80 m, and W = 7,260 J.

This is the work done by the weight lifter in lifting the 390-N weights from ground level to a position over his head.

It is important to note that the work done is the same whether the weight lifter moves the weights at a constant speed or at varying speeds.

The only factor that affects the amount of work done is the amount of force applied and the distance the weights were moved.

to know more about work refer here:

https://brainly.com/question/18094932#

#SPJ11

The ratio of the current, Ib/Ia = 1/4.6

The ratio of the currents in wires A and B, Ib/Ia, is determined by the ratio of their resistances.

To understand this more clearly, consider the following equation:
V = I R

This equation states that the voltage across a wire is equal to the product of the current in the wire and its resistance. Since the same voltage is placed across both wires, and the resistance of wire B is greater than that of wire A, the current in wire B must be less than that of wire A. Therefore, the ratio of the currents is the inverse of the ratio of their resistances.

Solving we get,

(Ib/Ia) = (V/4.6R) / (V/R) = 1/4.6.

In summary, when the same voltage is placed across two wires with different resistances, the ratio of the currents in those two wires is equal to the inverse of the ratio of their resistances.

Therefore, if the same voltage is placed across wires A and B, the ratio of the currents, Ib/Ia will be equal to 1/4.6.

To know more about currents, refer here:

https://brainly.com/question/13076734#

#SPJ11

The possible direction in which an electromagnetic wave is traveling if the electric field is oscillating along the z-axis and the magnetic field is oscillating along the x-axis is the y-axis.

An electromagnetic wave is composed of two mutually perpendicular fields that oscillate perpendicular to the direction of the wave's propagation. They are the electric field and the magnetic field. An electromagnetic wave is created when a charged particle is accelerated. These waves can travel through a vacuum or any medium, including air and water, at the speed of light.

In this scenario, the electric field of the wave oscillates along the z-axis, while the magnetic field oscillates along the x-axis. As a result, the wave's propagation direction must be perpendicular to both fields. As a result, the wave must be propagating along the y-axis.This is why it's critical to comprehend the interplay between electric and magnetic fields in the context of electromagnetic waves.

It's also critical to recognize that an electromagnetic wave's direction of propagation is always perpendicular to the oscillation directions of the two fields, which are mutually perpendicular to each other.

for such more question on electromagnetic wave

https://brainly.com/question/24319848

#SPJ11

To drain a 6.0-V battery that can store 500.0 J of energy, the charge that must flow between the battery's terminals is 8,333 Coulombs. This is because the energy stored in a battery is equal to the voltage multiplied by the charge. Therefore, 500.0 J = 6.0 V x Q, where Q is the charge.

Solving for Q, we find that the charge must be 8,333 Coulombs. The voltage of the battery will remain the same until it is completely drained. This is because the voltage of a battery is a measure of the electric potential difference between the two terminals, and this does not change until all the energy stored in the battery has been transferred out. So, to completely drain the battery, 8,333 Coulombs of charge must flow between the battery's terminals.

Know more about Coulombs here

https://brainly.com/question/4111722#

#SPJ11

Malus's law describes how much light is transmitted when a beam of polarised light travels through a polarizer:

I = I0 cos^2(θ)

where is the angle formed by the transmission axis of the polarizer and the polarisation direction of the input light, and I0 is the beam's starting intensity.

The transmission axis of the polarizer in this issue makes a 35.0 degree angle with the vertical. The angle between the transmission axis and the polarisation direction is 90 - 35.0 = 55.0 degrees since the incident light is horizontally polarised.

By applying the provided values to Malus's law, we obtain:

I0 cos2 = 0.55 W/m2 (55.0 degrees)

To solve for I0, we obtain:

I0 equals 0.55 W/m2/cos2 (55.0 degrees)

I0 = 1.24 W/m^2 (rounded to two major values) (rounded to two significant figures)

learn more about polarizer here:

https://brainly.com/question/30002497

#SPJ4

Electrons from the student's hair to the plastic comb. When the student runs the comb through her hair, the comb and the hair rub against each other. This friction causes the transfer of electrons between the two materials.

Friction is a force that opposes motion between two surfaces in contact. Whenever two surfaces are in contact and one of them moves or tries to move over the other, there is a force that resists the motion. This force is called friction. Friction arises due to the irregularities on the surfaces of the objects in contact. When the two surfaces are pressed together and moved relative to each other, the irregularities interlock and create resistance to motion. The force of friction always acts in the opposite direction to the direction of motion or the direction of the applied force.

To know more about friction visit :

https://brainly.com/question/28356847

#SPJ1

Answer:

By the law of conservation of momentum, the total momentum of the system before and after the push must be equal. Therefore, we can use the following equation to solve for Jill's velocity:

(mass of Jack) x (velocity of Jack) = (mass of Jill) x (velocity of Jill)

Plugging in the given values, we get:

(64.3 kg) x (2.19 m/s) = (45.4 kg) x (velocity of Jill)

Solving for the velocity of Jill, we get:

velocity of Jill = (64.3 kg x 2.19 m/s) / 45.4 kg = 3.10 m/s (eastward)

Therefore, Jill's body is propelled eastward with a velocity of 3.10 m/s.