develop a matlab program to solve the matrix eigenvalue problem. the smallest eigenvaluewill give you the critical load. be sure to use a sufficient number of discrete points to getan accurate result for the eigenvalue. use your program to analyze the design of a a material, cross-section and length

The CPT code for peritoneal dialysis with two repeated physician evaluations is 90951. This code is used to bill for the initial insertion of the catheter into the peritoneal cavity, the exchange of dialysis solution, and the monitoring and adjustment of the treatment regimen by the physician.

The two repeated physician evaluations refer to the follow-up visits that are necessary to ensure the patient is responding well to the treatment and that any necessary changes are made to their dialysis plan. It is important to note that the CPT code for peritoneal dialysis with two repeated physician evaluations may vary depending on the specific circumstances of the procedure, so it is important to consult with a healthcare provider or billing specialist to ensure accurate coding and billing.

To know more about CPT code visit:

https://brainly.com/question/30410104

#SPJ11

Regarding information technology governance and corporate governance The correct statement  is b) that information technology governance is a subset of corporate governance.

This means that IT governance is an important aspect of overall corporate governance, which is the responsibility of management. While the CIO and internal auditors may play a role in IT governance, it is ultimately the responsibility of the management team to ensure that IT systems and processes are aligned with business objectives and effectively managed.

The COSO framework is a generally accepted framework for both IT governance and management, as well as overall corporate governance. Overall, IT governance is an important part of corporate governance that requires collaboration and coordination among various stakeholders.

To know more about technology visit:

https://brainly.com/question/9171028

#SPJ11

The best example of point-of-care service and documentation is nurses using bedside terminals to record vital signs.

This practice allows for real-time documentation of patient data and immediate access to it by healthcare providers, increasing accuracy and improving patient safety. Additionally, the use of bedside terminals can reduce the risk of errors in transcription and communication, as the data is directly entered into the electronic medical record.

This approach also allows for quick identification of any changes in patient status, enabling early intervention and prevention of complications. Overall, the use of bedside terminals for point-of-care service and documentation is an effective way to enhance patient care and streamline documentation processes.

learn more about point-of-care service here:

https://brainly.com/question/30483828

#SPJ11

The speedup for a processor with a 200ns clock frequency and 10 equally pipelined stages, with pipeline latches taking 5ns each, can be calculated by comparing the execution time of a non-pipelined processor to that of the pipelined processor.

In a non-pipelined processor, the clock frequency directly determines the time required to execute a single instruction. In this case, the clock frequency is 200ns. For the pipelined processor, each stage is processed in parallel, reducing the effective time required for each instruction. However, the pipeline latches introduce additional delay. With 10 equally pipelined stages, the total delay caused by the pipeline latches is 5ns * (10 - 1) = 45ns.

To calculate the speedup, we need to compare the execution time of a non-pipelined processor with that of the pipelined processor. In the non-pipelined processor, the execution time of an instruction is 200ns. In the pipelined processor, each stage takes 200ns, but due to the pipelining, multiple instructions are processed simultaneously. Therefore, the effective execution time of an instruction in the pipelined processor is reduced to 200ns / 10 = 20ns. The speedup can be calculated by dividing the execution time of the non-pipelined processor by the execution time of the pipelined processor: 200ns / 20ns = 10.

Therefore, the speedup for this processor, with 10 equally pipelined stages and pipeline latches taking 5ns each, is 10, meaning that the pipelined processor can execute instructions approximately 10 times  Therefore, the speedup for this processor, with 10 equally pipelined stages and pipeline latches taking 5ns each, is 10, meaning that the pipelined processor can execute instructions approximately 10 times faster than the non-pipelined processor.

Learn more about frequency here: https://brainly.com/question/30625605

#SPJ11

The correct answer to the question is D) Web 2.0.

The term "Web 2.0" was coined in the early 2000s to describe a new approach to building and using the internet that emphasized user participation, collaboration, and social networking. This was a departure from the earlier version of the web, known as Web 1.0, which was largely characterized by static websites and limited user engagement.

Web 2.0 technologies and platforms allowed users to create and share content, connect with others through social media, and personalize their online experiences. Examples of Web 2.0 applications include blogs, wikis, social networking sites.These tools enabled users to share their own ideas, opinions, and experiences, and to collaborate with others in new and innovative ways.

The rise of Web 2.0 had a profound impact on the internet, ushering in a new era of user-driven content creation and interaction. Today, many of the most popular websites and applications are built on Web 2.0 principles,These platforms continue to evolve, providing new opportunities for users to connect, collaborate, and share their ideas and experiences with the world.

Learn more about Web 2.0 here:

https://brainly.com/question/18756729

#SPJ11

The current standard for PKI that specifies a strict hierarchical system for CAs issuing certificates is X.509. The correct option is C.

It is a widely used standard that defines the format of public key certificates, including information about the certificate holder and the CA that issued it. X.509 enables secure communication by providing a standardized way of verifying the identity of users and devices in a network. It is used in a variety of applications, including SSL/TLS, VPNs, and digital signatures. X.509 also supports the use of intermediate CAs, allowing for a more flexible and scalable certificate hierarchy.

This standard is essential for ensuring the authenticity and security of digital certificates. SSL, SSH, and HTTPS are protocols that utilize X.509 certificates for secure communication, but they are not the hierarchical system that governs the issuance of certificates. X.509 provides a structured way to verify the identities of entities and establish trust among parties in online communication.

To know more about certificates visit:-

https://brainly.com/question/17011621

#SPJ11

The number a (alpha) that Alice will send to Bob is D. 4.

The Diffie-Hellman method allows Alice and Bob to agree on a shared secret key without actually communicating the key itself. Instead, they each choose a secret number and perform some mathematical operations to generate a shared value that can be used as the key.

In this scenario, Alice and Bob are using Y=5 and P=7, which means they will be using the function 5X (mod 7) to generate their shared value. Alice chooses a secret number of 2 (A), while Bob chooses a secret number of 4 (B).
Both Alice and Bob now have a shared value of 4, which they can use as their secret key to encrypt and decrypt messages.

To know more about number visit:

https://brainly.com/question/31566755

#SPJ11

The WHERE clause in SQL is used to add conditions to select statements therefore the correct option is b.

It allows you to specify certain criteria that must be met in order for the query to return data. For example, you can use the WHERE clause to retrieve only records where a specific column equals a certain value, or where a certain date range is met.

The WHERE clause essentially filters out data that doesn't meet the specified conditions, and returns only the data that does. In other words, it allows you to refine your query results based on specific criteria.

To know more about conditions visit:

https://brainly.com/question/32359319

#SPJ11

The most popular screen resolution among the options listed below is 1920x1080 (Full HD).

Among the options listed, 1920x1080 (Full HD) is the most widely adopted screen resolution across various devices, including smartphones, tablets, laptops, and monitors. This resolution provides a balance between sharpness and performance, offering a clear and detailed display without excessive strain on system resources.

Full HD resolution (1920x1080) has become the standard for many devices due to its compatibility with a wide range of content, including movies, videos, and games. It offers a 16:9 aspect ratio, which is well-suited for multimedia consumption and allows for a cinematic viewing experience. Moreover, Full HD resolution is widely supported by operating systems, software applications, and websites, ensuring seamless compatibility and usability across different platforms. While higher resolutions like 2K (2560x1440) and 4K (3840x2160) have gained popularity in recent years, 1920x1080 remains the most prevalent screen resolution due to its balance between visual quality and system requirements. It provides a satisfactory level of detail for most users while still being accessible on a wide range of devices, making it the preferred choice for many consumers.

Learn more about operating systems here-

https://brainly.com/question/6689423

#SPJ11

Data transmissions over a WAN connection typically involve the transfer of information over a larger geographic area, often between different buildings, cities, or even countries. Option B, where a network administrator in the office remotely accesses a web server located in the data center at the edge of the campus, best describes a situation where data transmissions over a WAN connection are occurring.

In this scenario, the network administrator is accessing information from a remote location over the WAN connection, which allows for the transfer of data between different networks or geographic locations. Options A, C, and D describe situations that involve data transmissions, but they are more likely to occur over a local area network (LAN) rather than a WAN connection. For example, an employee printing a file through a networked printer in another building (option A) typically involves the use of a LAN, where the printer and computer are connected to the same network.

Similarly, sharing a database file with a co-worker in a branch office on the other side of the city (option C) may involve the use of a LAN if both offices are part of the same network. Finally, sending an email to all employees in the department with offices located in several buildings (option D) may involve the use of a LAN or WAN depending on how the email is sent and received, but it is not a clear example of data transmissions over a WAN connection.

To know more about Data transmissions  visit:-

https://brainly.com/question/32127477

#SPJ11

True. Most modern processors have various performance registers that can be used to count events, including the clock tick counter.

These performance registers allow software developers to measure and analyze the performance of their applications, and identify bottlenecks or areas for improvement. By monitoring events such as cache misses, branch mispredictions, and instruction execution, developers can gain insights into the behavior of their code and optimize it for better performance.

Performance registers are specialized registers in a processor that help monitor and count specific events, like clock ticks, cache hits, and instruction execution. These registers enable developers and engineers to analyze the performance of a processor and optimize the software running on it.

To know more about registers visit:-

https://brainly.com/question/32267631

#SPJ11

Suppose you encounter a situation in which a while loop in your program runs without stopping. What could you do to improve the codehe correct option is: C.Updating the conditional statement in the while loop.

Suppose you are working with a while loop that is running without stopping, it means that the condition you have set in the while loop is not getting fulfilled. Therefore, updating the conditional statement in the while loop will help in making the loop stop.Instead of restarting your computer or switching to a for loop, you can troubleshoot the issue by checking the conditional statement of the while loop.

This is a better solution and less time-consuming.Updating the conditional statement will make sure that the loop runs for a certain number of times and then stops. It will also help in increasing the efficiency of the program.Using try/except statements to catch and handle the exception is useful when an exception occurs in the program. It is not a solution to this problem. Therefore, the answer is C. Update the conditional statement in the while loop.

Learn more about while loop: https://brainly.com/question/26568485

#SPJ11

Usually, it is located near the top of the screen bezel.

On most laptops, the integrated microphone is typically located near the top of the screen bezel, either on the left or right side.

Some laptops may have multiple microphones for better audio quality or noise cancellation, in which case they can be located on both sides of the screen bezel or near the keyboard.

Learn more about  microphones at:

https://brainly.com/question/22939468

#SPJ4

When the number of children of an inner vertex can be one or two, different trees can deliver the same pre-order traversal arrangement, driving uncertainty in tree reproduction.

On the off chance that the number of children of an inside vertex can be one or two, it is conceivable to have two diverse trees whose pre-order traversals result within the same grouping. This can be known as a "vague" circumstance.

To demonstrate this, consider the taking after the case:

Tree 1:

A

/

B C

Tree 2:

A

/

B

C

Both Tree 1 and Tree 2 have the same pre-order traversal sequence of "ABC". In any case, they are basically diverse trees. In Tree 1, C could be a kin of B, whereas, in Tree 2, C could be a child of B. Hence, the same pre-order traversal sequence can compare to diverse trees in this case.

Learn more about sequence here:

https://brainly.com/question/7882626

#SPJ4

Modifying relay-type process control circuits typically requires changes in the O input circuit modules and O circuit operating voltage levels, as well as adjustments to the O circuit wiring and O output circuit modules.

When modifying relay-type process control circuits, the O input circuit modules need to be updated to accommodate any changes in the system. These modules are responsible for receiving signals from sensors or other input devices and transmitting them to the control circuitry. If the modification involves adding or removing sensors, or if the existing sensors require different signal conditioning, the O input circuit modules may need to be adjusted accordingly. In some cases, modifying the relay-type process control circuit may also involve changing the operating voltage levels of the O circuit. This is particularly relevant if the modification involves integrating new components or devices that operate at different voltage levels than the existing ones. Adjusting the operating voltage ensures compatibility and proper functioning of the circuit.

Additionally, modifying relay-type process control circuits often requires making changes to the O circuit wiring. This includes rearranging or adding new connections between components, such as relays, switches, or indicator lights. Proper wiring ensures the correct flow of signals and power throughout the circuit, enabling effective control and monitoring of the process. Finally, the O output circuit modules may need to be modified when altering relay-type process control circuits. These modules are responsible for driving the output devices, such as motors, valves, or alarms, based on the control signals received. If the modification involves changing the output devices or their specifications, the O output circuit modules may require adjustment or replacement to ensure compatibility and proper operation. Overall, modifying relay-type process control circuits involves adjusting the O input circuit modules, O circuit operating voltage levels, O circuit wiring, and O output circuit modules to accommodate the desired changes in the control system.

Learn more about circuits  here-

https://brainly.com/question/12608491

#SPJ11

With regerard to TCP Reno, note that since the maximum calibrated segment on the graph is 45 units on the y- axis, this means that  the 160th segment would fall outside the range of the graph, indicating that it is not depicted on the graph.

TCP Reno is a congestion control algorithm used in the Transmission Control Protocol (TCP), a widely used protocol for reliable data transmission over IP networks.

TCP Reno aims to detect and respond to network congestion by reducing its transmission rate when packet loss occurs.

It uses a combination of packet loss detection through the detection of duplicate acknowledgments and the adjustment of the congestion window size to regulate network traffic and improve overall network performance.

Learn more about TCP at:

https://brainly.com/question/14280351

#SPJ4

Full Question:

Although part of your question is missing, you might be referring to this full question:

Unless the different protocol is explicitly stated, assuming tcp reno is the protocol experiencing the behavior shown in the figure. question 54 during what transmission round is the 160th segment sent?

See attached image.

The statement "Underlined text displays below the hyperlink" is not true when creating object hyperlinks.

When creating object hyperlinks, the underlined text does not typically display below the hyperlink. Instead, the underlined text is usually displayed as part of the hyperlink itself. The underlining is used to indicate that the text is clickable and represents a hyperlink.

In the context of creating object hyperlinks in applications like Microsoft Office, such as Word, Excel, or PowerPoint, you would typically select the text or object that you want to turn into a hyperlink. Then, you would use the "Insert Hyperlink" dialog box or a similar feature to define the destination or action associated with the hyperlink.

Learn more about hyperlink on

https://brainly.com/question/17373938

#SPJ4

Here's how you can use the `writeln` method of the `document` object to display the user agent in a tag on the webpage:

First, you need to retrieve the user agent information from the `window.navigator` object using the `userAgent` property. This property contains a string that identifies the user agent (i.e. the browser) making the request.

Once you have retrieved the user agent information, you can use the `writeln` method to display it in a tag on the webpage. Here's an example code snippet that demonstrates how to do this:

```



Display User Agent Information



 var userAgentInfo = window.navigator.userAgent;
 document.writeln("<p>Your User Agent: <a href='#'>" + userAgentInfo + "</a></p>");



```

In this example, we first retrieve the user agent information using `window.navigator.userAgent` and store it in a variable called `userAgentInfo`.

Next, we use the `writeln` method to display the user agent information within a paragraph tag on the webpage. We also include an anchor tag (``) around the user agent information, although this is optional.

When you load this webpage in your browser, you should see a message that displays the user agent information (e.g. "Your User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/83.0.4103.116 Safari/537.36").

Learn more about HTML here:

https://brainly.com/question/30139884

#SPJ11

An answer questionnaire is a valuable tool for measuring users' reactions to the support services they receive. This type of survey allows businesses to gather feedback on their support services and identify areas where improvements can be made.

An answer questionnaire is a form of survey that measures users' reactions to the support services they receive. It is designed to gather feedback on the quality of support services, including positive and negative experiences. This information can be used to identify areas where improvements are needed, such as training, communication, or response times. Answer questionnaires provide valuable insights into customers' perceptions of a business's support services and can help companies improve their overall customer service experience.

An answer questionnaire is an essential tool for businesses that want to gather feedback on their support services. By measuring users' reactions to support services, businesses can identify areas for improvement and provide a better customer service experience. Answer questionnaires provide valuable insights into customers' perceptions of a business's support services and can help companies enhance their support offerings to better meet customer needs.

To know more about businesses visit:
https://brainly.com/question/31668853
#SPJ11

Amazon S3 supports static web hosting for HTML, CSS, JavaScript, and image files. This means that a company can use Amazon S3 alone to host their website if it consists of only static content. Static content refers to files that do not change frequently, such as a company's about page or product descriptions.

However, if the website has dynamic content, such as user-generated data or a content management system, a traditional web server would be necessary to handle the server-side scripting. In conclusion, Amazon S3 is a viable option for hosting a static website without the need for a traditional web server.

To know more about website visit:

brainly.com/question/30700038

#SPJ11

The truth value for each of the following propositions is as follows:

If February has 30 days, then 7 is an even number. (Implication)

Truth value: True (since the antecedent is false, the implication is true)

February has 30 days iff 7 is an even number. (Biconditional)

Truth value: False (since the statements are not equivalent)

4.2 + 2 = 4 or 7 is an even number. (Disjunction)

Truth value: True (since at least one of the statements is true)

5.2 + 2 = 4 ⊕ 7 is an even number. (Exclusive OR)

Truth value: False (since both statements are false)

6.2 + 2 = 4 and 7 is an even number. (Conjunction)

Truth value: False (since one of the statements is false)

If February has 30 days, then 5 is a prime number. (Implication)

Truth value: True (since the antecedent is false, the implication is true)

February has 30 days or 7 is an even number. (Disjunction)

Truth value: True (since at least one of the statements is true)

Read more on truth value here https://brainly.com/question/28562089

#SPJ4

Locational tendencies of high tech industries do not include a preference for rural or remote areas with limited access to infrastructure or transportation networks.

These industries tend to cluster in urban and suburban areas that offer a highly skilled labor force, access to research and development facilities, and a strong network of suppliers and customers. Additionally, high tech industries often seek out locations with favorable business regulations, tax incentives, and support from local government and universities. While some high tech companies may operate in remote locations, they are often specialized in areas such as renewable energy or natural resource extraction, rather than software development or information technology.

learn more about Locational tendencies here:

https://brainly.com/question/24134629

#SPJ11

False. Good speakers often use connectives between main points to enhance the flow and coherence of their speech. Connectives, such as transitional phrases and linking words, help guide the audience through the speaker's ideas and create a logical structure.

They serve as signposts, signaling transitions between main points, emphasizing relationships, and highlighting key ideas. Connectives help listeners understand the speaker's message by providing cues about the organization and progression of the speech. They can include phrases like "firstly," "in addition," "on the other hand," "consequently," and many others. Effective speakers recognize the importance of connectives in maintaining the clarity and cohesion of their speech.

To learn more about  connectives click on the link below:

brainly.com/question/16780676

#SPJ11

The Samsung SmartThings device is best described as a control interface. It acts as a hub for various smart home devices, allowing the user to control them through a single app on their phone.

In this scenario, the individual with spinal muscular atrophy is using the app on her phone as the control interface to communicate wirelessly with the Samsung SmartThings device. The SmartThings device, in turn, serves as the intermediary between the user's phone and the smart lightbulbs, sending out wireless signals to turn them on and off or adjust their brightness.

The Samsung SmartThings device is not a user display or an appliance, although it may be connected to and control various appliances such as smart lightbulbs, thermostats, or security systems. It is also not an output distribution component, which typically refers to a device that distributes a signal to multiple devices such as an audio or video receiver. Rather, the Samsung SmartThings device is specifically designed as a central control interface for smart home devices, providing a seamless user experience by allowing the user to manage all their devices through a single app.

To know more about Samsung SmartThings visit:

https://brainly.com/question/29312993

#SPJ11

Cabling standards and technologies play a crucial role in ensuring efficient and reliable data transmission. Key standards include 10BaseT, 100BaseT, 1000BaseT, and 10GBaseT, which refer to Ethernet over twisted pair cables at 10 Mbps, 100 Mbps, 1 Gbps, and 10 Gbps, respectively.

The cables used in these standards are Cat5, Cat5e, Cat6, and Cat7, with Cat5e being an enhanced version of Cat5, and Cat6 and Cat7 offering higher performance. Cat5e is commonly used for 100BaseT, while Cat6 is suitable for 1000BaseT and 10GBaseT up to certain distances. Cat7 is designed for even higher speeds and improved performance.
It is essential to adhere to these cabling standards and select appropriate cables to ensure optimal data transmission and network performance.

learn more about Cabling standards here:

https://brainly.com/question/31607833

#SPJ11

The answer to this question is both true and false, depending on the setup and intended use. In some cases, it is possible to connect multiple monitors to a single video card, provided that the card has multiple video outputs and sufficient processing power to handle the additional displays.

However, in other cases, it may be necessary to install multiple video cards, particularly when using more than two monitors or when running graphics-intensive applications such as gaming or video editing software. Ultimately, the decision of whether or not to use multiple video cards when using multiple monitors will depend on the specific hardware and software requirements of the user, as well as their budget and performance needs.

learn more about multiple monitors here:

https://brainly.com/question/30438609

#SPJ11

We can see here that yes, there is  way in wordpress to make changes to something, but that change only impact the mobile view.

WordPress is a free and open-source content management system (CMS) based on PHP and MySQL. WordPress is used by millions of people around the world to create websites and blogs.

One way is to use the Device Toolbar in the Inspect Element tool in your web browser. To do this, open the page you want to make changes to in your web browser and then open the Inspect Element tool. Click on the Device Toolbar icon and then select the Mobile device from the list.

Learn more about wordpress on https://brainly.com/question/30369942

#SPJ4

One common way to decrease the IT spending of a company is B) move toward cloud computing.

Cloud computing refers to the delivery of computing services, such as servers, storage, databases, software, and analytics, over the internet ("the cloud"). By using cloud services, companies can avoid the upfront costs and ongoing maintenance of their own IT infrastructure, and instead pay for what they use on a pay-as-you-go basis.

This can lead to significant cost savings, as companies no longer need to invest in expensive hardware and software, or hire and train specialized IT personnel to manage it. In addition, cloud computing can provide greater scalability, flexibility, and accessibility, allowing companies to easily adjust their IT resources based on their changing needs. As a result, many companies are shifting their IT operations to the cloud.

To know more about cloud visit:

https://brainly.com/question/32144784

#SPJ11

To change your IP address on an Android device without being detected by sites or apps that may be monitoring for VPN or proxy usage, you can try using a few different methods. One option is to use a mobile hotspot, which allows you to connect to a different network and get a new IP address. Another option is to try using a DNS server that masks your IP address without using a VPN or proxy. Finally, you can try using a paid service that offers IP rotation, which will automatically change your IP address at regular intervals.

Changing your IP address on an Android device without being detected by sites or apps that are monitoring for VPN or proxy usage can be tricky, but there are a few methods you can try. One option is to use a mobile hotspot to connect to a different network and get a new IP address. Another option is to try using a DNS server that masks your IP address. Finally, you can use a paid service that offers IP rotation to automatically change your IP address at regular intervals. It's important to note that some sites and apps may still be able to detect these methods, so use caution when creating multiple accounts.

Changing your IP address on an Android device without being detected by sites or apps can be achieved through methods such as using a mobile hotspot, a DNS server that masks your IP address, or a paid service that offers IP rotation. However, it's important to be cautious as some sites and apps may still be able to detect these methods. It's best to use these methods ethically and responsibly, and to avoid creating multiple accounts for malicious or fraudulent purposes.

To know more about IP address visit:
https://brainly.com/question/31171474
#SPJ11

The statement is true. When a database is split using the Database Splitter, the tables are separated into two databases - a front-end database that contains the forms, queries, and reports, and a back-end database that contains the tables.

The front-end database links to the tables in the back-end database through a network connection or a shared folder. If the back-end database is moved to a different drive location, the physical drive locations of the tables will also change. This means that the front-end database will no longer be able to find the tables in their original location. To fix this issue, the Linked Table Manager must be used to change the physical drive locations of the tables in the back-end database so that the front-end database can link to them again.

To use the Linked Table Manager, open the front-end database and go to the External Data tab. Click on the Linked Table Manager button, which will open a window showing all of the linked tables in the front-end database. Select the tables that need to be updated and click on the "Linked Table Manager" button. In the next window, click on the "Always prompt for new location" checkbox and then browse to the new location of the back-end database. Once the new location has been selected, click on "Open" and the front-end database will be able to link to the tables in the back-end database again. In summary, if the back-end database is moved to a different drive location, the Linked Table Manager must be used to update the physical drive locations of the tables in the back-end database so that the front-end database can continue to use them. The front-end database links to the tables in the back-end database through a network connection or a shared folder. If the back-end database is moved to a different drive location, the physical drive locations of the tables will also change. This means that the front-end database will no longer be able to find the tables in their original location. To fix this issue, the Linked Table Manager must be used to change the physical drive locations of the tables in the back-end database so that the front-end database can link to them again. True After splitting a database using the Database Splitter, if the back-end database is moved to a different drive location, the Linked Table Manager must be used to change the physical drive locations of the tables located in the back-end database for the front-end database to be able to use them. Your answer is: True.

To know more about Database visit:

https://brainly.com/question/30163202

#SPJ11