The correct answe is South Africa - Economic Growth and Development:
After the formal end of the previous apartheid system two decades ago, South Africa can now boast having one of the richest economies in Africa and a well-functioning democracy. It is the largest economy in Africa, but it also has deeply ingrained structural issues that limit its ability to expand and flourish.
One of the largest economies on the African continent is that of South Africa. However, despite a period of rapid development from 2003 to 2007, its real GDP average yearly growth rate between 2001 and 2010 has been very weak and unquestionably significantly below the African average. A number of African nations have had substantially faster growth rates, which has improved a number of development-related indices.
By the standards of the recent growth records of several Euro Zone nations, South Africa's development is hardly sluggish! One crucial aspect of the economy is that South Africa has achieved relatively modest progress in meeting a number of important development targets and some of the Millennium Development Goals, but her economy does not appear to have achieved the "take-off" required to kick start significant development progress, especially against the backdrop of her deep social problems.
To learn more about South Africa's development refer the link:
https://brainly.com/question/24400106
#SPJ9
Based on the information you have seen, in which sport do the players have a greater change of hitting a home run? Use your understanding of forces to explain.
Then step off and then throw to the base where the infraction occurred. There is no need to tell an umpire what you are appealing the players have a greater change of hitting a home run.
What is home run?In baseball, a home run (abbreviated HR) is scored when the batter is able to safely round the bases and get to home plate in one play without any errors from the opposing team's defense. Typically, a home run is obtained by launching the ball over the outfield fence in between the foul poles (or by striking either foul pole) without allowing it to touch the field. A much less frequent type of home run is one that occurs "within the park," in which the batter makes it safely home while the ball is still in play on the field.
A hit, a run scored, and a run batted in (RBI) are all given to the batter when a home run is hit.
To learn more about home run from the given link:
https://brainly.com/question/13071738
#SPJ4
Calculate the average speed of a complete round trip in which the outgoing 290 km is covered at 91 km/h , followed by a 1.0- h lunch break, and the return 290 km is covered at 54 km/h .
The average speed of the complete round trip is 61.12 km / h.
We need to know about the average speed to solve this problem. The average speed can be determined as the total distance divided by the total time. It can be written as
v = d / t
where v is average speed, d is distance and t is time.
From the question above, we know that
d1 = 290 km
v1 = 91 km/h
t lunch = 1 hour
d2 = 290 km
v2 = 54 km/h
Find the time during the outgoing
v1 = d1 / t1
t1 = d1 / v1
t1 = 290 / 93
t1 = 3.12 hours
Find the return time
v2 = d2 / t2
t2 = d2 / v2
t2 = 290 / 54
t2 = 5.37 hours
Hence, the total time
t = t1 + t2 + t lunch
t = 3.12 + 5.37 + 1
t = 9.49 hours
Find the average speed
v = d / t
v = (290 + 290) / 9.49
v = 61.12 km / h
For more on average speed at: https://brainly.com/question/24739297
#SPJ4
A straight wire carrying a 3.00-A current is placed in a uniform magnetic field of magnitude 0.280 T directed perpendicular to the wire. (a) Find the magnitude of the magnetic force on a section of the wire having a length of 14.0cm.
The magnitude of the magnetic force on a section of the wire having a length of 14.0cm is 0.1176 N.
What is a magnetic field?The magnetic field is defined as the field the magnetic materials generate or when an electric charge moves in a field region that generates the magnetic field.
It is given that:
A straight wire carrying a 3.00-A current is placed in a uniform magnetic field of magnitude 0.280 T directed perpendicular to the wire.
As we know,
F = i L B sin θ
i = 3 A
L = 14 cm = 0.14 meters
B = 0.280 T
θ = 90 degrees
F = 3(0.14)(0.280)sin 90
F = 0.1176 N
Thus, the magnitude of the magnetic force on a section of the wire having a length of 14.0cm is 0.1176 N.
Learn more about the magnetic field here:
brainly.com/question/14848188
#SPJ4
f a ball is thrown into the air with an initial velocity of 46 ft/s, its height in feet after t seconds is given by y
The ball that is thrown into the air with a velocity of 44 ft/s, its height in feet t seconds later is given by the following equation:
y=46 ft/s * t - (32.17 ft/s² * t²/2)
The height in (ft) at a time (t) of a body that has been thrown with a certain velocity and is in vertical motion is given by the following equation:
y = vi * t - (g* t²/2)
Where:
y = heightvi = initial velocityg = gravityt = timeInformation about the problem:
vi = 46 ft/sg = 32.17 ft/s²y =?t = tApplying the height formula we get:
y = vi * t - (g* t²/2)
y = 46 ft/s * t - (32.17 ft/s² * t²/2)
What is the vertical upward launch?It is the movement described by an object that has been thrown vertically upwards in which the height and the effect of the force of the earth's gravity on the thrown object are considered.
Learn more about vertical upward launch at: brainly.com/question/14532699
#SPJ4
A golf ball with a speed of 45 m/s travels straight for a distance of 128 meters. How long was the golf ball traveling for?
Answer: First multiply the numbers you have! 45 x 128 = 5760 miles ! Hope this helps!~
A student walks 15 meters west, then turns south and walks for 7 meters. The student then begins to walk east for 15 meters until he reaches his destination. What was the student's distance? What about displacement? (hint draw it)
The total distance of the student is 37 m. The total displacement of the student is 7 m south.
What is distance?
The distance of an object is the total space covered by the object. It is scalar quantity because it has only magnitude with no direction.
The total distance covered by the student is calculated as follows;
distance = 15 m + 7 m + 15 m
distance = 37 m
What is displacement?The displacement of an object is the change in the position of the object. Displacement is vector quantity because it has both magnitude and direction.
The displacement of the student is calculated as follows;
displacement = space between the 15 m west and 15 meter east = 7 m south.
Thus, the total distance of the student is 37 m. The total displacement of the student is 7 m south.
Learn more about displacement here: https://brainly.com/question/2109763
#SPJ1
Simplify this hypothesis about the Michelson-Morley experiment.
"If the speed of light were constant with respect to the proposed ether through which Earth was moving, then that motion could be detected by comparing the speed of light in the direction of Earth's motion.”
The Michelson-Morley test set out to test whether or not or not the ether becomes an absolute reference body by measuring the velocity of light with admire to the shifting Earth. It became hypothesized that the rate of light ought to alternate with a change within the Earth's velocity across the solar.
The outcomes of the Michelson-Morley experiment found no interference styles which means that the velocity of light is equal in a vacuum. This brought about the realization that mild does now not require any medium to travel. The results of the Michelson-Morley experiment supported Einstein's principle of unique relativity.
It turned into hypothesized that the rate of mild ought to trade with a change in the Earth's pace around the sun. however, no such exchange in velocity of light turned into observed and this became called the null result. Michelson and Morley were capable of degree the velocity of light by means of seeking out interference fringes among the mild which had surpassed via the 2 perpendicular palms of their equipment.
Learn more about the Michelson-Morley experiment here:-https://brainly.com/question/15858195
#SPJ1
part a theory please study wave concept and answer the following questions. 1. what is wave? what is the difference between wave motion and particle in motion? what are the characters of mechanical wave?
At various locations in space and time, a wave's intensity varies.
What is the difference between wave and particle?At various locations in space and time, a wave's intensity varies. A particle is typically thought of as something that exists solely at one location in space. Subatomic "particles" travel like waves and interact like particles according to quantum physics. Because they have varying intensities at various points in space and time, they travel in waves. Because they are made up of a single energy unit that can only be absorbed in a single location, they interact like particles.
What are the characteristics of the mechanical wave?
1. There are only two basic methods for moving energy: the flow of waves and the stream of particles. A wave is a type of physical phenomenon that moves energy but does not matter.
2. Generally speaking, a wave is a continuously moving disturbance of a medium, and that medium can either be a field (such as an electric or gravitational one) or a substance (a solid, a fluid).
To learn more about waves, visit:
https://brainly.com/question/3639648
#SPJ4
a car starts from rest and uniformly accelerates to a final speed of 20.0 m/s in a time of 15.0 s. how far does the car travel during this time?
150m far the car travel during this time.
What do you mean by acceleration?The rate at which the speed and direction of a moving object vary over time is called acceleration. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Acceleration is a vector quantity since it has both a magnitude and a direction. The velocity vector change during a time interval divided by the time interval is the definition of acceleration. The limit of the ratio of the change in velocity over a given time interval to the time interval, as the time interval approaches zero, determines the instantaneous acceleration (at a specific time and location).
To learn more about acceleration, visit:
https://brainly.com/question/460763
#SPJ4
A boy throws a ball straight up into the air. It reaches the highest point of its flight after 4 seconds-How fast was the ball going when it left the boy's hand?
Answer:
Answer is
[tex]4g \: m {s}^{ - 1} [/tex]
Explanation:
We have to find the initial velocity, u.
Final velocity is v = 0. And acceleration is due to gravity.
Now,
[tex]v = u + at[/tex]
[tex]0 = u + ( - g)m {s}^{ - 2} \times 4s[/tex]
[tex]u = 4g \: m {s}^{ - 1} [/tex]
Therefore, the final answer depends on the value of g.
Find the vector using parallelogram law [and Pythagoras theorem (h² = a² + o²) h being the hypothenuse, a being the adjacent side and o being the opposite side]
The Pythagorean Theorem states that the squares on the hypotenuse (the side across from the right angle) of a right triangle, or, in standard algebraic notation, a2 + b2, are equal to the squares on the legs.
What is Pythagorean Theorem called?The Pythagorean theorem, sometimes known as Pythagoras' theorem, is a fundamental relationship between a right triangle's three sides in Euclidean geometry. According to this rule, the areas of the squares on the other two sides add up to the area of the square whose side is the hypotenuse, or the side across from the right angle. The Pythagorean equation, which is typically used to express this theorem, can be expressed as an equation linking the lengths of the legs (a, b), and the hypotenuse (c):
There are several ways to generalize the theorem, including to higher-dimensional spaces, non-Euclidean spaces, objects other than right triangles, and even things that are not triangles at all but n-dimensional solids. The Pythagorean theorem has garnered interest outside of mathematics as a representation of mathematical mystique, power, or obscurity; there are numerous references to it in popular works of fiction, dramas, musicals, songs, stamps, and cartoons.
To Learn about Pythagorean Theorem, refer:
https://brainly.com/question/343682
#SPJ9
a toy train moves around a circular track, of radius 0.55 m, 10 complete times over 3 minutes. what is the train’s average speed?
The toy train that moves around a circular track, of radius 0.55 m, 10 complete times over 3 minutes has a speed of: 0.1919 m/s
To solve this problem the formulas and the procedures we will use are:
v = (2*π * r * n)/ t
Where:
v = tangential velocityπ = mathematical constantr = radiusn = number of lapst = timeInformation about the problem:
r = 0.55 mn = 10t = 3 minπ = 3.1416v=?By converting the time unit from (min) to (s) we have:
t = 3 min * 60 s/1 min
t = 180 s
Applying the tangential velocity formula we get:
v = (2*π * r * n)/ t
v = (2* 3.1416 * 0.55 m * 10)/ 180 s
v = 0.1919 m/s
What is tangential velocity?In physics is the length of arc traveled in each unit of time in uniform circular motion. It is expressed in units of distance per time (m/s), (km/h).
Learn more about tangential velocity at: brainly.com/question/19660334
#SPJ4
If a football player runs with an average speed of 7.76 m/s, then how much time ( in seconds ) would it take to run 58.6 m?
Average speed is the total distance travelled in total time taken. Here, the total distance covered by the football player is 58.6m ad the average speed is 7.76m/s therefore, the time taken will be 7.55 sec.
What is Average Speed?
Average Speed is the rate at which the total distance is covered by an individual. It can be calculated by the formula:
Average Speed = Total distance travelled by an object ÷ Total time taken
Average Speed = 7.76 m/s
Total distance travelled = 58.6 m
Hence, time taken to cover the distance can be calculated by dividing the distance covered by the object by Average Speed of the object:
Time taken = 58.6 m ÷ 7.76 m/s
Time taken = 7.55 sec
Learn more about Speed here:
https://brainly.com/question/12322912
#SPJ1
A 75.0-g ice cube at 0°C is placed in 825g of water at 25.0°C . What is the final temperature of the mixture?
Mixture has a final temperature of 3.22 ⁰C
What is specific heat capacity ?
Scientifically, specific heat capacity is the quantity of heat (J) absorbed by a material when its temperature increases 1 K (or 1 °C) per unit mass, expressed as J/(kg K) or J/(kg °C).
Q = mCΔT
Ft is the final temperature. It is, however, important to note that ice absorbs heat during the melting and cooling processes, and as such, it does not lose heat to or from the surrounding environment; hence, it conserves energy.
75g of heat rejected by ice = 825g of heat absorbed by water
m(ice)[C(ice) [LH(ice) + C(water)(ΔT)] = C(water) m(water) (ΔT)
So, 75x [ 333.5 + 4.187(Ft - 0)]= 285 x 4.187 x (25 - Ft)
333.5 + 4.187Ft = 3.8 x 4.187 (25-Ft)
333.5 + 4.187Ft = 397.765 -15.9106Ft
20.1Ft =64.265
Ft = 3.22 ⁰C
Therefore, Mixture has a final temperature of 3.22 ⁰C
Learn more about "specific heat" here:
https://brainly.com/question/21041726
#SPJ1
An electron and a proton, moving in opposite directions, are accelerated from rest through the same potential difference. Which particle has the longer wavelength? (a) The electron does. (b) The proton does.(c) Both are the same.(d) Neither has a wavelength.
The electron has the longer wavelength which is option (a) .
De Broglie proposed that because light has both wave and particle properties, matter exhibits both wave and particle properties. This property has been explained as the dual behavior of matter.De Broglie's relationship is given by [tex]\lambda=\frac{h}{mv}[/tex] .....(1) where λ is known as de Broglie wavelength and m is mass of the particle , v i velocity of the particle ,h = Plank’s constant .As mass of electron is less that the mass of the proton .
From equation (1) it is clear that de Broglie wavelength is inversely proportional to the square root of the mass of the material.
Hence , so de Broglie wavelength of electron will be greater than that of proton.
Learn more about de Broglie here :
https://brainly.com/question/16595523
#SPJ4
The rest energy of an electron is 0.511MeV. The rest energy of a proton is 938MeV. Assume both particles have kinetic energies of 2.00MeV. Find the speed of (a) the electron
The speed of the electron is 0.98c, given that the rest energy of an electron is 0.511MeV and the rest energy of a proton is 938MeV, with both particles having kinetic energies of 2.00MeV.
A particle's total energy and the rest energy follow the laws of physics and the theory of relativity. The energy of any particle is equal to mass times the speed of the light-squared relatively.
Where; E=γ.〖mc〗^2
γ is the ratio of total energy to rest energy of the particle.
m_0 is known as the rest mass of the particle.
Rest energy can be written as: E_0=〖m_0 c〗^2
γ=K/E_0 +1 (1)
γ=1/(√1-v^2/c^2 ) (2)
Putting the values of the electron energy into equation (1):
γ=2.00MeV/0.511MeV+1
γ= 3.91 + 1
γ=4.91
From equation (2),
γ=1/(√1-v^2/c^2 )
Squaring both sides of the equation,
γ^2=1/(1-v^2/c^2 )
1/γ^2 =1-v^2/c^2
v^2/c^2 =1-1/γ^2
v/c=√1-1/γ^2
Making v subject of the formula,
v=√1-1/γ^2 ×c (3)
Inserting the values in the equation,
v=√1-1/〖4.91〗^2 ×c
v=√1-1/24.11×c
v=√0.959×c
v=0.98×c
v=0.98c
Therefore, the speed of the electron is 0.98c. #SPJ4
For more, click on https://brainly.com/question/28457743
#SPJ4
A grating with 250 grooves mm is used with an incandescent light source. Assume the visible spectrum to range in wavelength from 400nm to 700nm . In how many orders can one see (a) the entire visible speed
The number of orders that one can see the entire visible speed is 5 orders.
How to calculate the orders?From the information given, it should be noted that the grating with 250 grooves mm is used and the visible spectrum range in wavelength from 400nm to 700nm. Therefore, the grating spacing will be:
d = (1.00 × 10^-4) / 250
d = 4000nm
Therefore, the number of times that are needed to complete the order will be the same as the number of orders which the long wavelength time will be visible. This will be:
= (4000 × sin 90°)/700
= 5.71
Therefore, the maximum orders will be 5.
Learn more about speed on:
brainly.com/question/13943409
#SPJ1
Suppose you perform Young's double-slit experiment with the slit separation slightly smaller than the wavelength of the light. As a screen, you use a large half-cylinder with its axis along the midline between the slits. What interference pattern will you see on the interior surface of the cylinder?(a) bright and dark fringes so closely spaced as to be indistinguishable (b) one central bright fringe and two dark fringes only (c) a completely bright screen with no dark fringes (d) one central dark fringe and two bright fringes only (e) a completely dark screen with no bright fringes
The interference pattern that you you see on the interior surface of the cylinder is (a) bright and dark fringes so closely spaced as to be indistinguishable
What is Young's double slit experiment?Young's double slit experiment is the experiment performed in 1801 by Thomas Young to prove that light is a wave.
Since you are performing Young's double-slit experiment with the slit separation slightly smaller than the wavelength of the light and as a screen, you use a large half-cylinder with its axis along the midline between the slits.
What interference pattern will you see on the interior surface of the cylinder?Now, we know that the interference pattern of a Young's double slit experiment is as a result of diffraction.
What is interference pattern?Interference pattern is the pattern observed due to the vectorial combination of waves
What is diffraction?Diffraction is the property of a wave in which a wave spreads out as it passes through an opening.
Now, we know that diffraction occurs when a wave goes through an aperture or opening smaller than its wavelength.
Now, the smaller the opening compared to the wavelength of the wave, the more the diffraction you would observe bright and dark fringes so closely spaced as to be indistinguishable.
So, the interference pattern that you you see on the interior surface of the cylinder is (a) bright and dark fringes so closely spaced as to be indistinguishable
Learn more about interference pattern here:
https://brainly.com/question/28204279
#SPJ1
The height of a person is 1.65 m. Express it into cm and mm
Answer:
1.65 m = 165 cm = 1650 mm
Explanation:
Hope this helps :)
Answer:
1.65 m = 165cm
1.65 m = 1,650mm
Explanation:
1.65 m = 165cm
for converting m to cm ▶ meters×100 ▶ 1.65×100=165cm
1.65 m = 1,650mm
for converting m to mm ▶ meters×1,000 ▶ 1.65×1,000=1,650mm
Hope it helps!!!
;}
if a force f⃗ acts on an object as that object moves through a displacement s⃗ , the work done by that force equals the scalar product of f⃗ and s⃗ : w
If a force f acts on an object as that object moves through a displacement s , the work done by that force equals the scalar product of f and s : w . This is because when the object moves, the force applied to it changes in magnitude and direction.
Therefore, multiplying this change in Force by the distance traveled.
What connection exists between an object's work and its displacement?The distance and direction that an object is moved are known as displacement. While force and displacement are indirectly proportional, work and force are directly proportional. W= Fd is the equation illustrating the relationship.F stands for force in newtons, W for work measured in joules, and d for distance in meters.To learn more about displacement, visit:
https://brainly.com/question/27741577
#SPJ4
Force pairs definition
The statements which are true about Newton's Third Law force pairs include the following:
A force pair is only created when there are equal and opposite forces on a system. Force pairs point in opposite directions. Force pairs have the same magnitudes. Force pairs should never be on the same free body diagram. What is Newton's Third Law of Motion?Newton's Third Law of Motion states that for every action there is an equal but opposite reaction. This ultimately implies that, in every interaction, there is a pair of forces (force pairs) acting on the two interacting objects.
In Science, force pairs are also referred to as action-reaction pairs, which are forces acting on different object and have the same (equal) magnitude but opposite in direction.
What is a free body diagram?A free body diagram can be defined as a graphical illustration which is typically used to visualize moments, tension, and applied forces that are acting on an isolated or rigid body (object), while using arrows pointing in the direction of these forces.
Read more on Newton's Third Law of Motion here: brainly.com/question/25998091
#SPJ1
Complete Question:
Which of the following statements are true about Newton's 3rd law force pairs? There may be more than one correct answer.
If there is a force on a system, then there must be a force pair present on a different system. A force pair is only created when there are equal and opposite forces on a system. Force pairs point in the same direction. Force pairs point in opposite directions. Force pairs can have different magnitudes. Force pairs have the same magnitudes. Force pairs should never be on the same free body diagram. Force pairs should be on the same free body diagram if they are present.are two quantities considered to be “directly proportional” and “indirectly
proportional” to each other?
brainliest for answer
Yes, two quantities are considered to be “directly proportional” and “indirectly proportional” to each other.
What are “directly proportional” and “indirectly proportional”?The term “directly proportional” refers to the relationship between two quantities when one factor increases the other factor or quantity is also increases while on the other hand, “indirectly proportional” refers to the relationship between two quantities when one factor increases the other factor or quantity is decreases. Indirectly proportional is also known as inversely proportion because one increases and the other increases.
So we can conclude that Yes, two quantities are considered to be “directly proportional” and “indirectly proportional” to each other.
Learn more about proportional here: https://brainly.com/question/1266676
#SPJ1
Owen and Dina are at rest in frame S' , which is moving at 0.600 c with respect to frame S . They play a game of catch while Ed , at rest in frame S , watches the action (Fig. P39.75). Owen throws the ball to Dina at 0.800 c (according to Owen), and their separation (measured in S' ) is equal to 1.80 × 10¹²m .(d) how fast. is the ball moving.
0.385c m/s is the speed of the ball relative to Ed.
A frame of reference is a set of reference points—geometric points whose positions are known mathematically and physically—that define the origin, orientation, and scale of an abstract coordinate system.
If a body does not continuously adjust its position in relation to its environment throughout the course of time, it is said to be at rest.
In the frame S', Dina and Owen are at rest.
The speed of the ball with respect to Owen, u =0.800c
The speed of the frame S' with respect to frame S, v = 0.600c
Distance between Dina and Owen, L(p) = 1.8 × 10¹² m
Speed of light, c = 3 × 10⁸ m/s
Therefore, the velocity of the ball in relation to Ed is:
u' = (u-v) / 1-(uv/c²)
u' = (0.8c - 0.6c) / 1- [(0.8c)(0.6c)/c²]
u' = (0.8c - 0.6c) / 1- [(0.8)(0.6)]
u' = 0.3846c ≈ 0.385c
The speed of the ball with respect to Ed is 0.385c m/s.
Learn more about the frame of reference here:
https://brainly.com/question/10962551
#SPJ4
A series R L Circuit has components with the following values: L=20.0mH, C=100 nF, R=20.0 Ω , and ΔVmax = 100V, with Δv=ΔVmax sin Ω t . Find (b) the amplitude of the current. at. the resonant frequency,
The amplitude of the current at resonant frequency is 5 A
What is a R L C circuit?R L C is acronym representing Resistor Inductor and Capacitor. A circuit containing Resistor, Inductor, and Capacitor is called R L C circuit. The connection of the circuit can be in series or in parallel;
For connection in series, like we have the end of the connection point of the resistor marks the beginning of the connection point of the inductor and the end of the inductor marks the beginning of the connection point for the capacitor. The sequence of the connection may not be exactly R L C however connection of the three components end to end represents the R L C series connection
How to solve for current. I at resonant frequencyGiven values:
L=20.0mH,
C=100 nF,
R=20.0 Ω ,
ΔVmax = 100V
I = ΔVmax / R
I = 100 / 20
I = 5.0 Amp
Read more on R L C circuits here: https://brainly.com/question/15595203
#SPJ1
Shakib says that 25 meters per second is a velocity. Vania says that 25 meters per second is a speed. Who do you agree with?
Vania is correct in her saying that 25 meters per second is speed as in 25 meter per seconds nothing represents the direction in which the speed is pointing.
What is speed?Speed is a physical quantity that represents the change in distance per unit time it is a scalar quantity and its SI unit is meter per second. Speed only has magnitude but does not have direction.
What is velocity?Velocity is a physical quantity that represents the change in displacement per unit time it is electric quantity and its SI unit is meter per second. Velocity has both magnitude and direction.
Given:
The physical quantity is 25 meters per second.
According to the question Shakib points out that 25 meters per second is velocity, but Shakib is wrong in saying so as in 25 meters per second nothing represents the direction of this quantity.
Here from the given data we can only know the magnitude of the physical quantity but not wear it is pointing towards to.
On the other hand one ya says that 25 m per second is a physical quantity that represents speed and her reasoning is that 25 m per second gives the magnitude as well as the SI units of speed and do not point out in a particular direction therefore the quantity must be speed.
Hence, Vania is correct in her saying that 25 meters per second is speed as in 25 meter per seconds nothing represents the direction in which the speed is pointing.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ9
"4. Two long, parallel wires each carry the same current I in the same direction (Fig. OQ 30.4) . Is the total magnetic field at the point P midway between the wires (a) zero,(b) directed into the page,(c) directed out of the page,(d) directed to the left, or (e) directed to the right?"
Total magnetic field at the point P midway between the wires is Zero.
The higher wire's contribution to the magnetic field at point P is directed into the page, whereas the lower wire's contribution is directed out of the page. These two oppositely directed contributions to the magnetic field have identical magnitudes and cancel each other out since point P is equally spaced from the two wires and the currents flowing through them are of equal magnitude.
Define magnitude?The term "magnitude" refers to an object's greatest size and direction. Scalar and vector quantities both use magnitude as a common factor. We are aware that scalar quantities are those that have just magnitude by definition. Those quantities with both magnitude and direction are considered vector quantities. It can also be used to describe how far an object has travelled or how much an object weighs in terms of its magnitude.
To learn more about magnitude, visit:
https://brainly.com/question/14033610
#SPJ4
Q|C A large set of unoccupied football bleachers has solid seats and risers. You stand on the field in front of the bleachers and sharply clap two wooden boards together once. The sound pulse you produce has no definite frequency and no wavelength. The sound you hear reflected from the bleachers has an identifiable frequency and may remind you of a short toot on a trumpet, buzzer, or kazoo.(a) Explain what accounts for this sound. Compute order-of-magnitude estimates for
A tone with 20 crests can be heard coming from the stands, each of which is spaced out in time by 0.004s.
What is crest?A crest, or the object carried on top of the helm, is a part of a heraldic display. Crests were originally decorative sculptures worn by knights during tournaments and, to a lesser extent, wars; but, until the 16th century, they exclusively consisted of pictures.
A typical heraldic achievement consists of the shield, the helm, the crest, and the base of the crest, which is encircled by a circlet of twisted fabric known as the torse. The term "crest" is used frequently due to the practice of using the crest and torse separately from the rest of the achievement, which spread during the paper heraldry era.
a) Let the horizontal width of each row of seats be 60cm=0.6m.
Let the speed of sound v= 340m/s
Let's now imagine that the single narrow peak on a graph of air pressure versus time corresponds to our loud, acute sound impulse.
The time it takes the sound impulse to travel from one riser to the next is,
[tex]t=\frac{0.6m}{340m/s}[/tex]
=0.002s
Let's say there are 20 rows of seating.
You can hear a tone with 20 crests coming from the stands, each one separated in time from the next by,
[tex]\frac{2(0.6m)}{340m/s} =0.004s[/tex]
To learn more about crest ,visit:
https://brainly.com/question/11600788
#SPJ4
Can someone please answer these questions. will mark brainiest. need asap.
Answer:
I don't know I can't see can you take a better picture
What is the equivalent resistance of a circuit that contains four 75.0 Ω
resistors connected in series to a 100.0 V battery?
Ο Α. 300.0 Ω
Ο Β. 750.0 Ω
Ο C. 1.33 Ω
Ο D. 175.0 Ω
Answer:
Ο Α. 300.0 Ω
Explanation:
The equivalent resistance of a circuit that contains four 75.0 Ω in series combination 300Ω
What is a parallel and series combination of resistance?When two or more resistors are connected between two same points, they are said to be connected in parallel combination(as shown in fig). The equivalent resistance is the reciprocal and the sum of reciprocals of all resistance connected in parallel combination.
1/Rs = 1/R₁ + 1/R₂ + 1/R₃...........+ 1/R(n).
where Rs is the equivalent or total resistance of the circuit.
In parallel combination, same potential difference exists across each resistor. But current through each resistance is different.
When two or more resistors are connected one after other, they are said to be connected in series as shown in figure. in this combination voltage difference across each resistance is different which is given by ohms law. current flowing through each resistance is same.
equivalent resistance for series combination is given by,
R(s) = R₁ + R₂ + R₃...........+R(n).
Given,
R₁ + R₂ = R₃ = R₄ = 75Ω
For series combination,
R(s) = R₁ + R₂ + R₃+R₄
R(s) = 75+75+75+75
R(s) = 300 Ω
Hence option A is correct.
To know more about resistance :
https://brainly.com/question/30799966
#SPJ5.
at what distance is an object if its parallax, as measured from either end of a 1000 km baseline, is 1''(arcsec)?
distance of object = (½ baseline)/(tanθ/2)
= (½ × 1000)/(tan0.5")
= 500/0.000000242 km
distance of object = 206248306 km
Definition of parallax?
Particularly: the angular difference in direction of a celestial body as measured from two places on the earth's orbit. The apparent displacement or the difference in apparent direction of an object as seen from two separate points that are not on a straight line with the object
The apparent movement of objects when observed from various angles is referred to as "parallax." An illustration of this can be noticed while traveling on the highway; when you glance out the window, electricity poles close to the road seem to fly by, while distant trees seem to drift by slowly.
The angle here between Earth at one time of year and the Earth 6 months later, as measured from a nearby star, is defined as the parallax angle.
To know more about Parallax, visit,
https://brainly.com/question/3527534
#SPJ4