Explain grounding in your own words

Answers

Answer 1
Earthing is a safety device against the excessive current in the circuit or against the fatal presence of current.

Related Questions

A cheetah can accelerate from rest to a speed of 30. 0 m/s in 7. 00 s. What is its acceleration?.

Answers

The cheetah that can accelerate from rest to a speed of 30.0 m/s in 7.00s has an acceleration of: 4.285 m/s²

The formula and procedure we will use to solve this exercise is:

a = (vf - vi) /t

Where:

a = accelerationvf = final velocityvi = initial velocityt = time

Information about the problem:

vi= 0 m/svf = 30.0 m/st = 7.00 sa=?

Applying the acceleration formula we have:

a = (vf - vi) /t

a = (30.0 m/s - 0 m/s) /7.00 s

a = (30.0 m/s m/s) /7.00 s

a = 4.285 m/s²

What is acceleration?

It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2

Learn more about acceleration at: brainly.com/question/14344386

#SPJ4

What does small q show in the following formula: q1=q2=Q=CeqV?

Answers

Answer:

A parallel plate capacitor of capacitance C is charged using a battery. • Charge = Q, potential difference = V. • Battery is then disconnected.The electric field is a function of position, but does not depend on the test charge. It is a real entity, because we will show that it carries energy! Hope this helps!

if you Launch a cannonball at a launch angle of 55° and an initial speed of 30m/s. What is the cannonball's range?

Answers

Answer:

86.2 m  range

Explanation:

Vertical component of initial shot = 30 sin 55= 24.575 m/s

Now you can find out for how long it is in the air

     when it hits the ground , position = 0

            0 = 24.575 t  - 1/2 ( 9.81) t ^2

                         finds t = 5.01 seconds       (Using quadratic formula)

HORIZONTAL component = 30 cos 55 = 17.21 m/s

    it travels this speed for 5.01 seconds

               5.01 * 17.21 = 86.2 m

(a) A proton moving with velocity →v = vi experiences a magnetic force →F = Fi(j) . Explain what you can and cannot infer about \overrightarrow{\mathbf{B}} from this information.

Answers

The current must be along +x axis.

What is electric current?

A stream of charged particles, such electrons or ions, traveling through an electrical conductor or a vacuum is known as an electric current. It is calculated as the net rate of passage of electric charge through a surface or into a control volume. Charge carriers, which can be any one of a number of particle kinds depending on the conductor, are the moving particles. Electrons travelling through a wire are frequently the charge carriers in electric circuits. They may be electrons or holes in semiconductors. Ions are the charge carriers in an electrolyte, whereas ions and electrons make up plasma, an ionized gas.

Explanation:

Given,

Velocity of proton,V = [tex]V_{i} i[/tex]

Magnetic force,F = [tex]F_{i} j[/tex]

Magnetic Field= B

(a)

If proton (p+) is moving in ve x-direction.

So,current(I) must be along +x axis.

To learn more about electric current ,visit:

https://brainly.com/question/2264542

#SPJ4

An object is moving and velocity of 8 m/s and accelerates to 35 m/s or 6.3 seconds. what is the acceleration?

Answers

Answer:

4m/s^2

Explanation:

u find the average of the two velocities then place the outcome in the acceleration formula given time as 6.3 seconds .....dividing the average of the velocities

A stone of mass 0.12 kg is fired from a catapult. The velocity of the stone changes from 0 to 5.0 m / s in 0.60 s. What is the average resultant force acting on the stone while it is being fired?

Answers

Answer:

Explanation:

The answer will be the 1.66N

According to the 1 equation of motion:

v=u+at; where v=final velocity, u=initial velocity, a= acceleration, t=time

According to the given value in question

0=5+a*0.60

a= -5/0.60

a=-13.88m/s2

Now according to the Newton’s 2 law

F=ma; where F=force, m=mass

F=0.12*13.88

F=1.66N

So, the average resultant force acting on the stone while it is being fired will be 1.66N.

Know more about the equations of motion from the below given link:

https://brainly.com/question/25951773

orange light has a wavelength, λ, of 6.0 × 10-7 m. in a vacuum, the speed of light, c, is 3.0 × 108 m/s. what is the frequency, f, of the orange light? (remember: 1 hz

Answers

The frequency of orange light is 5 x 10¹⁴ Hz or 500 THz.

We need to know about photon frequency to solve this problem. The photon frequency can be determined as

f = c / λ

where f  is frequency, c is speed of light (3x10⁸ m/s) and λ is wavelength.

From the question above, we know that:

c = 3x10⁸ m/s

λ = 6 x 10¯⁷ m

By substituting parameters, we get

f = c / λ

f =  3 x 10⁸ /( 6 x 10¯⁷ )

f = 5 x 10¹⁴ Hz

For more on frequency at: https://brainly.com/question/10728818

#SPJ4

what does is mean if the VR of the machine is 2?​

Answers

Answer:

Velocity ratio of simple machine is the ratio of distance traveled by the effort to the distance traveled by the load in the machine. As velocity ratio or ideal mechanical advantage is a simple ratio of two distances.Hence always remains constant. Option A is correct.

*PLEASE MARK AS BRAINLIEST*

Answer:

Velocity ratio of simple machine is the ratio of distance traveled by the effort to the distance traveled by the load in the machine. As velocity ratio or ideal mechanical advantage is a simple ratio of two distances.Hence always remains constant. Option A is correct.

Explanation:

EXTRA:Velocity ratio of a lever is 3 means distance travelled by effort is 3 times the distance travelled by the load. Efficiency of the pulley is 60% means 40% of the energy is lost in the machine due to the friction.

EXTRA:Ans:- MA of a lever is 3 it means that the load is 3 times of effort and VR of a lever is 4 it means that effort distance is 4 times of load distance.

PLEASE MARK AS BRAINLIEST GAVE MORE INFO THAN 1ST ANSWER!

a car with a velocity of 22 m/s is accelerated uniformly at the rate of 1.6 m/s'' for 6.8 s. what is its final velocity?

Answers

The final velocity of the car, given the data is 32.88 m/s

What is acceleration?

This is defined as the rate of change of velocity which time. It is expressed as

a = (v – u) / t

Where

a is the acceleration v is the final velocity u is the initial velocity t is the time

How to determine the final velocity

The following data were obtained from the question:

Initial velocity (u) = 22 m/sAcceleration (a) = 1.6 m/s²Time (t) = 6.8 s Final velocity (v) = ?

The final velocity of the car can be obtained as follow:

a = (v – u) / t

1.6 = (v – 22) / 6.8

Cross multiply

v – 22 = 1.6 × 6.8

v – 22 = 10.88

Collect like terms

v = 10.88 + 22

v = 32.88 m/s

Learn more about acceleration:

https://brainly.com/question/491732

#SPJ1

It takes a sample of molecules 10 s to diffuse 1.0 mm. how long will it take to diffuse 2.0 mm ?

Answers

The time taken to diffuse 2.00 mm will be 20 seconds.

The velocity of diffusion(v) is given by the following formula:

v = Distance/Time

We are given that it takes a sample of molecules 10 seconds to diffuse 1.00 mm.

Thus, its velocity is

v = 1.0 mm/10 s = 0.1 mm/s

In the second case, the distance is given, so we can calculate the time required for diffusion by again applying the same formula

0.1 = 2.00 mm/Time

On rearranging above equation, we get

Time = 20 seconds

Thus, the time taken to diffuse 2.00 mm will be 20 seconds.

To know more about "diffusion", refer to the link given below:

brainly.com/question/24746577?referrer=searchResults

#SPJ4

Marta gives long, involved answers to every question, even simple ones. She uses technical vocabulary even if the people she is talking to do not understand it. What is the BEST advice Marta’s supervisor could give her?

A.
Use technology to your team’s advantage.

B.
Manage information, not people.

C.
Make sure your networks are strong.

D.
Adapt your communication style.

Please HELP

Answers

Answer:

D. Adapt your communication style.

Explanation:

It is quite difficult to gauge the protocol here given the lack of information about the work environment; but as a general answer, communication skills are always handy. Furthermore, it seems that Marta in particular struggles with this. Assuming Marta is providing a specialized service of a sort, she would need to understand that there is a reason why her services are required at all. Through this, hopefull she'll understand that they are most likely outside of this field of work, and ergo [she] must cater and gear her actions towards the interest of the person(s) in question.

It is to be noted that this is merely my surmise.

D adapt your communication style

A monochromatic light beam is incident on a barium target that has a work function of 2.50 \mathrm{eV} . If a potential difference of 1.00 \mathrm{~V} is required to turn back all the ejected electrons, what is the wavelength of the light beam? (a) 355 nm(b) 497 nm(c) 744 nm(d) 1.42 pm(e) none of those answers

Answers

The wavelength of the light beam required to turn back all the ejected electrons is 497 nm which is option (b).

Work function is a material property defined as the minimum amount of energy  required to infinitely remove electrons from the surface of a particular solid. The potential difference required to support all emitted electrons is called the stopping potential which is given by [tex]v_0=\frac{K.E_m_a_x}{e}[/tex] .....(1)where [tex]v_0[/tex] is the stopping potential and e is the charge of the electron given by [tex]1.6\times10^-^1^9[/tex] .

It is given that work function (Ф) of monochromatic light is 2.50 eV.

Einstein photoelectric equation  is given by:

[tex]K.E_m_a_x=E-\phi[/tex]      ....(2)

where K.E(max) is the maximum kinetic energy.

Substituting (1) into (2) , we get

  [tex]ev_0=E-\phi\\1.6\times10^{-19} \times1=E-2.50\\E=1.6\times10^{-19}+2.50\\E=2.50eV[/tex]

As we know that [tex]E=\frac{hc}{\lambda}[/tex]  ....(3)

where Speed of light,[tex]c = 3\times10^8 m/s[/tex] and Planck's constant , [tex]h = 6.63\times 10^-^1^9Js = 4.14\times 10^-^1^5 eVs[/tex]

From equation (3) , we get

[tex]\lambda=\frac{hc}{E} \\\\\lambda=\frac{ 4.14\times 10^-^1^5 \times 3 \times10^8}{2.50} \\\\\lambda=\frac{1240\times10^-^9}{2.50} \\\\\lambda=496.8\times10^-^9\\\\\lambda=497nm[/tex]

Learn about more einstein photoelectric equation  here:

https://brainly.com/question/11683155

#SPJ4

a large beaker of water is filled to its rim with water. a block of wood is then carefully lowered into the beaker until the block is floating. in this process, some water is pushed over the edge and collects in a tray. the weight of the water in the tray is a large beaker of water is filled to its rim with water. a block of wood is then carefully lowered into the beaker until the block is floating. in this process, some water is pushed over the edge and collects in a tray. the weight of the water in the tray is less than the weight of the block. greater than the weight of the block. equal to the weight of the block.

Answers

The correct answer is Equal to the weight of the block.

We are aware that when an object floats, the water it displaces weighs the same as the weight of the floating body. The upthrust is now equivalent to the body weight in this situation. The beaker is overflowing with water in this instance. The body was then created to float into it. When it reaches equilibrium in water, it expels water that must have been the same weight as it. Over the edge, the liquid spilled, collecting on the tray.

Therefore, the amount of water gathered on the tray must match the weight of the person floating.

Learn more about weight here-

https://brainly.com/question/10069252

#SPJ4


The proportions and arrangement of atoms in any compound are always

the same

or

different

Answers

The correct option is A True
According to the law of constant proportions any compound is made up of elements in a definite proportion by mass. Also, this proportion does not depend on the source of the compound.

Hence, water (
H
2
O
) will always have hydrogen to oxygen atoms in the ratio of 2:1, in its molecule, regardless of its source.

A football player pushes a 590 n tackling sled. his coach observes this and believes that this is too light and wants to present the player with a greater physical challenge. he asks two players (player a weighs 100 kg and player b weighs 125 kg). the coefficient of static friction between the sled and grass is 0.70. how much force must the player exert to start the tackling sled in motion with players a and b on it

Answers

The player has to apply a force of 1956.5N to start tackling sled in motion.

Coefficient of static friction μ[tex]_{s}[/tex] = 0.70

Weight of sled = mg

                        = 590N

Weight of Player A = [tex]m_{a}g[/tex]

                               = 100 × 9.8

                              = 980N

Weight of Player B = [tex]m_{b}g[/tex]

                               = 125 × 9.8

                              = 1225N

Combined weight of sled:

W =  (590+980+1225)N

   = 2795N

Now, friction on sled:

f = μ[tex]_{s}[/tex]R

  = 0.70 × 2795

  = 1956.5N

Therefore, the player has to apply force equal to static friction to start tackling sled in motion.

∴ Force = Static friction =  1956.5N

Read more about Force:

https://brainly.com/question/20363353

#SPJ4

2. Do you think the density of the ice affected the melting rate of the ice, or do you think adding the objects affected the melting rates?

Answers

The density of ice does not affect its melting rate. Adding objects will affect the melting rate.

A physical process called melting or fusing causes a substance to change its phase from a solid to a liquid. This happens when the solid's internal energy rises, usually as a result of heat or pressure being applied, which raises the substance's temperature to the melting point.The term "density" refers to an extensive quality, which means that it is independent of the substance's concentration. Every substance in the world demonstrates its distinctive density. Since it does not fluctuate, it would not affect the rate of melting. The addition of the objects could speed up the process, though, as each one generates heat that could act as the mediating force for the melting process.

To learn more about density, visit :

brainly.com/question/15164682

#SPJ9

As the people sing in church, the sound level everywhere inside is 101 dB . No sound is transmitted through the massive walls, but all the windows and doors are open on a summer morning. Their total area is 22.0 m² . (a) How much sound energy is radiated through the windows and doors in 20.0 min?

Answers

The sound energy radiated through the windows and doors in 20 min is 332.6 J.

What do you mean by Sound energy?

When a force, such as sound or pressure, causes an item or substance to vibrate, the result is sound energy. That energy moves through the substance in waves. Those sound waves are called kinetic mechanical energy. Sound waves are sometimes dubbed mechanical waves because sound waves require a physical medium to propagate. Liquids, gases, or solid materials transfer pressure variations, creating mechanical energy in waves. Like all waves, sound waves include peaks and valleys. The peaks are called compressions, while rarefaction is the term used for the lows. The oscillations between compression and rarefaction move through gaseous, liquid, or solid media to produce energy. The number of compression/rarefaction cycles in a given period determines the frequency of a sound wave.

Sound energy = E = power x time

energy = force x time / area

Given:

sound level, [tex]\beta=101 dB[/tex]

Area, A = [tex]22\;m^{2}[/tex]

Time, [tex]\triangle t=20\;min=1200\;s[/tex]

Intensity, [tex]I_{o}=1 \times 10^{-12}\;W/m^{2}[/tex]

We know that, Sound level is,

[tex]\beta=10 \times log\frac{I}{I_{o} }[/tex]

Solving the above equation for sound intensity,

[tex]I=I_{o}\times 10^{\frac{\beta}{10} }[/tex]

[tex]I=I \times 10^{-12} \times 10^{\frac{101}{10} }[/tex]

[tex]I=0.0126\;W/m^{2}[/tex]

Therefore, The sound energy is,

[tex]E = P \times \triangle t[/tex]

Substitute [tex]P=I \times A[/tex] in the above equation,

[tex]E = I \times A \times \triangle t[/tex]

[tex]E = 0.0126 \times 22 \times 1200[/tex]

[tex]E = 332.6\;J[/tex]

To learn more about sound energy, Visit:

https://brainly.com/question/582060

#SPJ4

you should begin viewing a bacteria specimen with what objective lens? view available hint(s)for part g you should begin viewing a bacteria specimen with what objective lens? 100x 10x 40x

Answers

Some people view bacteria specimens with a 100x objective lens in order to see the smallest details. Others may use a 10x objective lens for more general purposes, such as examining stained slides or pictures. And still others may use a 40x objective lens to gain maximum resolution when viewing images of thick samples.

It is important to choose the appropriate magnification for your needs so that you can properly examine the specimen under study.

Why is the 100x objective lens necessary to see bacteria?Bacteria must, of course, be viewed at the maximum magnification and resolution possible because to their small size. Due to optical restrictions, this is approximately 1000x in a light microscope. To improve resolution, the oil immersion method is performed. This calls for a unique 100x objective.

To learn more about bacterial specimen, visit:

https://brainly.com/question/1412064

#SPJ4

Some towns depend on water from snow that falls high up in the mountains, melts, and flows down the mountain. Some years, spring comes early and the snow begins to melt earlier than usual. What is one problem of early water runoff that engineers might be asked to solve? What criteria and constraints might need to be considered for concerns such as materials, space, and cost?

Answers

The problem of early water runoff that engineers might be asked to solve is the issue of Impervious surfaces, or surfaces that are unable to absorb water.

What criteria and constraints might need to be considered are?

They are:

RoadsSidewalks, Parking lots are impervious surfaces. Car-washing soapsLitterSpilled gas, etc.

In the water cycle, runoff is known to be when water just "streaming off" the surface of the ground. The rain need to also drains downhill, just like the water a person use to wash their  car does as a person work are all part of runoff.

Therefore, The problem of early water runoff that engineers might be asked to solve is the issue of Impervious surfaces, or surfaces that are unable to absorb water.

Learn more about water runoff  from

https://brainly.com/question/27137213

#SPJ1

The motion of a transparent medium influences the speed of light. This effect was first observed by Fizeau in 1851. Consider a light beam in water. The water moves with speed v in a horizontal pipe. Assume the light travels in the same direction as the water moves. The speed of light with respect to the water is c / n , where n=1.33 is the index of refraction of water.(b) Show that for v<

Answers

It is proved that when v<<c , then speed of the light measured in the laboratory frame is , u = c/n + v -v/n^2 .

Given ,

The motion of a transparent medium influences the speed of light .

The water moves with speed v in a horizontal pipe .

Assume that the light travels in the same direction as the water moves .

The speed of the light with respect to the water is c/n

Where n = 1.33 is the refractive index of water .

Let us assume ,

u' be the speed of light in water , in the frame moving with the water .

u' is related to the refractive index of water ,n as :

u'=c/n

where , c is the speed of light .

let , u be the speed of light in water in the lab frame .

Now , u and u' are related as : u = (u'+ v )/(1+ u'v/c^2)

Here v is the speed of water in the horizontal pipe .

we know the value of u' , so by substituting the value , we will get ,

u= (c/n+ v)/(1+cv/nc^2)

u= c/n(1+ nv/c)/(1+v/nc)

(b) We have , v<<c

v/c<<1 .

so , (1+v/nc )^-1 = (1-v/nc)

Now substituting this , we will get ,

u = c/n(1+nv/c) (1-v/nc)

u≈c/n(1+ nv/c-v/cn)

u≈c/n + v - v/n^2

Hence , it is proved that when v<<c , then speed of the light measured in the laboratory frame is , u = c/n + v -v/n^2 .

Learn more about speed here :

brainly.com/question/13943409

#SPJ4

Disclaimer : incomplete question , here is the complete question .

Question: The motion of a transparent medium influences the speed of light. This effect was first observed by Fizeau in1851. Consider a light beam in water. The water moves with speed v in a horizontal pipe. Assume the light travels in the same direction as the water moves. The speed of light with respect to the water is c / n , where n=1.33 is the index of refraction of water.(a) Use the velocity transformation equation to show that the speed of the light measured in the laboratory frame isu = c/n (1 + nv/c / 1+ v/nc) . (b) show that for v<<c , the expression from part (a) becomes , to a good approximation , u ≈ c/n + v - v/n^2 .

A proton moves at 0.950 c . Calculate its (c) kinetic energy.

Answers

The kinetic energy of the proton is 1982.31 MeV.

We need to know about relativistic energy to solve this problem. The rest energy of the object can be determined by

Eo = m₀ . c²

where Eo is rest energy, m₀ is rest mass and c is the speed of light (3 x 10⁸ m/s).

The total energy of object can be described as

E = Eo / √(1 - v²/c²)

where E is total energy, v is the object speed.

Kinetic energy can be defined as energy change from rest energy until total energy. It can be determined as

KE = E - Eo

where KE is kinetic energy.

From the question above, we know that :

m₀ = 1.6 x 10¯²⁷ kg

c = 3 x 10⁸ m/s

v = 0.95c

Find the rest energy

Eo = m₀ . c²

Eo = 1.6 x 10¯²⁷ . (3 x 10⁸)²

Eo = 1.44 x 10¯¹⁰ joule

Eo = 1.44 x 10¯¹⁰ / (1.6 x 10¯¹⁹) eV

Eo = 900 x 10⁶ eV

Eo = 900 MeV

Determine the total energy

E = Eo / √(1 - v²/c²)

E = 900 / √(1 - (0.95c)²/c²)

E = 900 / 0.31

E = 2882.31 MeV

Calculate the kinetic energy

KE = E - Eo

KE = 2882.31 MeV - 900 MeV

KE = 1982.31 MeV

Find more on relativistic energy at: https://brainly.com/question/23920189

#SPJ4

What does weight require?

Responses

gravity and volume

gravity and volume

only mass

only mass

mass and gravity

mass and gravity

mass and volume

Answers

Answer:

Mass and gravity

Explanation:

[tex]{ \rm{weight = mass \times gravity}}[/tex]

Weight is the force exerted on an object due to gravity. The correct answer is mass and gravity. The correct option is an option  (3).

Weight requires both mass and gravity.

The formula for calculating weight is given by:

Weight = mass × gravitational acceleration

W = m × g

The gravitational acceleration is known by the strength of the gravitational field, which is typically constant at any given point.

The mass of an object and the strength of its gravitational field is its weight. It is the gravitational force that pulls an object toward the center of the Earth.

To know more about the weight and mass:

https://brainly.com/question/28122305

#SPJ3

Therefore, The correct option is (3).

The complete question is:

What does weight require?

1) gravity and volume

2) only mass

3) mass and gravity

4) mass and volume

Review. A global positioning system (GPS) satellite moves in a circular orbit with period 11h 58 min.(b) Determine its speed.

Answers

The global positioning system (GPS) satellite that moves in a circular orbit with period of 11h 58 min has a speed of: 3872.9848 m/s

To solve this problem the formulas and the procedures we will use are:

r =[(G* m *T²)/(4 * π²)]v = (2*π * r)/ T

Where:

r = orbital radiusG = Gravitational constantm = Mass of the EarthT = Time period of the satelliteπ = mathematical constantv = tangential velocity

Information about the problem:

T = 11h 58 minG = 6.67 × 10⁻¹¹ m³/kgs²m= 5.972 × 10²⁴ kgπ = 3.1416r =?v =?

By converting the time period of (h) and (min) from (s) we have:

T = (11h *3600 s/ 1 h) + (58 min * 60 s/1 min)

T = 39600 s +3480 s

T = 43080 s

Applying the orbital radius formula we get:

r =[(G* m *T²)/(4 * π²)]

r =[(6.67 × 10⁻¹¹ m³/kgs² * 5.972 × 10²⁴ kg *(43080 s)²)/(4 * (3.1416)²)]

r =[1.8725*10^22 m³]

r= 26.55465166*10^6 m

Applying the tangential velocity formula we get:

v = (2*π * r)/ T

v = (2 * 3.1416 * 26.55465166*10^6 m)/ 43080 s

v = 3872.9848 m/s

What is the orbital radius?

It is the maximum of the radial distribution curve of the outermost orbital.

Learn more about orbital radius at: brainly.com/question/14437688

#SPJ4

Sam jumped from a plane. His acceleration was -9.8 m/s². He hit the ground in 30
seconds. What was his velocity just before he hit the ground?

Answers

The velocity of Sam just before hitting the ground is 294 m/s.

The above situation represents a case of motion in one dimension.

This type of motion is governed by the following three equations of motion,

v = u + at

v² - u² = 2as

S = ut + 1/2 at²

As in the given case, the acceleration and time have been given and the final velocity is to be calculated, therefore the 1st equation can be used,

v = u+ at

As Sam jumped from the plane, his initial velocity is zero.

So,

v = 0 + 9.8(30)

v = 294 m/s.

Thus, Sam's velocity just before hitting the ground is 294 m/s.

Read more about Equations of motion:

https://brainly.com/question/14355103

#SPJ1

A light aircraft makes a flight during changeable weather conditions.

(a) Initially, in still air, the aircraft travels at a velocity of 44 ms' relative to the ground, on a bearing of 056°. Calculate the magnitude of the component of the aircraft's velocity that is directed northwards.

(b) A southward wind begins to blow with a velocity of 11 ms. The pilot does not correct the aircraft in response to the changing wind. Calculate the magnitude and bearing of the aircraft's new velocity.

Answers

Answer: a it goes north b goes south

Explanation:

Halley’s comet has a perihelion distance of 0. 6 au and an orbital period of 76 years. What is the aphelion distance of halley’s comet from the sun?.

Answers

The aphelion distance of Hailey's comet from the sun is 36 A. U.

The perihelion distance of Hailey's comet = 0.6 amu

The orbital period of Hailey's comet = 76 years

According to Kepler's law,

The time duration is T.

T = 76 years.

The semi-major axis is a.

The semi-major axis is,

[tex]T ^{2} =a ^{3} [/tex]

[tex]a = \sqrt[3]{(T) ^{2} }[/tex]

[tex]a = \sqrt[3]{(76) ^{2} }[/tex]

= 18 A. U

The aphelion distance of Hailey's comet from the sun is,

= 2 × a

= 2 × 18

= 36 A. U

Therefore, the aphelion distance of Hailey's comet from the sun is 36 A. U.

To know more about comets, refer to the below link:

https://brainly.com/question/28543341

#SPJ4

In a long, straight, vertical lightning stroke, electrons move downward and positive ions move upward and constitute a current of magnitude 20.0kA. At a location 50.0m east of the middle of the stroke, a free electron drifts through the air toward the west with a speed of 300 m/s . (a) Make a sketch showing the various vectors involved. Ignore the effect of the Earth's magnetic field.

Answers

A magnetic field, often known as a vector field, describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. A force acting on a charge while it travels through a magnetic field is perpendicular to both the charge's motion and the magnetic field.

In a long, straight, vertical lightning stroke, downward-moving electrons and upward-moving positive ions produce a current of magnitude I = 20.0 kA.

At a location r = 50.0 m east of the stroke's center, a free electron is moving through the atmosphere at a speed of v = 300 m/s.

Let B represent the magnetic field and F represent the magnetic force. The vector sketch may then be represented as follows:

Learn more about current here:

brainly.com/question/1100341

#SPJ4

At a convergent boundary, what is the relative motion of plates on each side of the boundary?.

Answers

Answer:

The plates move toward each other

Explanation:

Search this   and you can find the rest of answers for the test

GEO 1405 Chapter 2 Quiz

a mass on a spring undergoing simple harmonic motion completes 8 oscillations in 4.0 s. what is the period of the motion?

Answers

The period of oscillation is 0.5 second.

We need to know about period of oscillation to solve this problem. Period is how much time taken to do one oscillation. It can be determined as

T = t / n

where T is period, t is time and n is how many oscillations.

From the question above, we know that

n = 8

t = 4 s

By substituting the parameters, we get

T = t / n

T = 4 / 8

T = 0.5 second

Hence, the period of oscillation is 0.5 second.

Learn more about period at: https://brainly.com/question/24255969

#SPJ4

Describe how you would measure the diameter of a tennis ball

Answers

Place the tennis ball between two flat blocks such as wood as shown below. — Make sure the two blocks are parallel and had enclosed the entire ball. — Take a meter rule and measure the inside distance between the two blocks. This distance is the diameter of the tennis ball.
Other Questions
the nurse is planning to measure a patients blood pressure. what does the systolic measurement represent? What is the keyboard shortcut for pasting information that you have already copied to the clipboard?. according to the situational theory of leadership, a leader with a provides detailed objectives and explicit instructions about how tasks should be accomplished. I need help and Im not sure how to solve this. were supposed to copy the answers from our workbooks but I havent got mine :( find an equation for a line:a. with slope 6 passing through (-1, 4) b. that passes through (-5, 0) and (5, 6) URGENT!!! PLEASE ANSWER NOW! Which term describes the distribution of charges in a water molecule?polarevennegativeorganic is the common thread that is woven throughout all of the change process components. a. knowledge b. communication c. trust d. honesty The airline pilot made multiple jokes during the flight is an example of a(n) _________ verb.A. IntensiveB. IntransitiveC. IndefiniteD. Transitive psychologists disagree on whether is ever permissible in the conduct of psychological research. Malcolm answered 12 questions correctly on his social studies assignment and scored 75%. how many questions were on the assignment why erosion and deposition take place side by side give reason How do I do this equilibrium constant problem?[Ap Chem] 17. How are the separation methods for homogeneous and heterogeneous mixtures compared?A homogeneous mixture can be separated chemically, while a heterogeneous mixture can be separated physically.A homogeneous mixture could be separated through distillation, while a heterogeneous mixture could be separated through filtration.A homogeneous mixture could be separated through filtration, while a heterogeneous mixture could be separated through distillation.A homogeneous mixture can be separated physically, while a heterogeneous mixture can be separated chemically. i need help with this please which term describes aristotle's opinion on knowing the different types of government? pointless pointless unnecessary unnecessary critical critical impossible 6.(11x-47)(6x-2)m1Solve for missing variable l and m are parallel In right triangle $ABC,$ $\angle C = 90^\circ.$ Median $\overline{AM}$ has a length of $19,$ and median $\overline{BN}$ has a length of $18.$ What is the length of the hypotenuse of the triangle? what is the value of (x+y)^2 when x=2 and y= -4? 2x2+2x28161418HELP ME PLS you are stinky . i hope you know tht