explain how apostivley charged object can be used to leave another metalic boject with a net negative charge

The moment of inertia of the wheel is gotten to be I = 41.2 kg.m²

Angular displacement = 5.55 revolutions × 2π radians/revolution

Angular displacement = 34.9 radians

Angular acceleration:

Angular acceleration = (final angular velocity - initial angular velocity) / time

Angular acceleration = (88.8 rad/sec - 0 rad/sec) / 0 s

Angular acceleration = 88.8 rad/sec²

Moment of inertia.

Moment of inertia = (torque × angular displacement) / angular acceleration

Moment of inertia = (77.7 Nm × 34.9 radians) / 88.8 rad/sec²

Moment of inertia = 41.2 kg.m²

Learn more about the Moment of inertia here:

https://brainly.com/question/14460640

#SPJ1

The proper order of structures through which light must pass in order to perceive and image is cornea, aqueous humor, lens, vitreous humor, retina.

These are the five main structures of the human eye that enable vision, including light perception and imaging. Let's delve into each of these structures.

Cornea: The clear, protective outer layer of the eye is the cornea. The cornea has two purposes: to shield the inner eye from harm and to help focus light on the retina at the back of the eye.

The cornea's curved shape bends light waves as they enter the eye, assisting in their concentration.

Aqueous humor: This is a liquid that flows throughout the front of the eye, nourishing and removing waste from its surrounding tissues.

It aids in the maintenance of normal eye pressure, and if this pressure becomes too high, it can lead to glaucoma.

Lens: The lens' job is to concentrate light onto the retina. It's a transparent structure with a biconvex (lens-like) shape that varies in thickness.

It is supported by ciliary muscles that allow it to alter shape when we focus on things at different distances.

Vitreous humor: This gel-like substance fills the eye's posterior (rear) cavity, providing it with structural stability and helping it to maintain its form. It also assists in light refraction.

Retina: This is a thin layer of tissue lining the rear of the eye. The retina's photoreceptor cells, or rods and cones, are sensitive to light.

The retina converts light energy into neural signals that are transmitted to the brain via the optic nerve, which is located behind the eye. The brain translates these signals into images, allowing us to see.

What we see when we open our eyes is formed by light. In order to perceive an image, light must pass through a series of structures in the eye.

The cornea, aqueous humor, lens, vitreous humor, and retina are the five main structures of the human eye that enable vision, including light perception and imaging.

to know more about light refer here:

https://brainly.com/question/29994598#

#SPJ11

The Maxwell equation ∇ × E = -∂B/∂t can be used to predict the magnetic field in a region of space in which the electric flux is changing.

The Maxwell equation ∇ × E = -∂B/∂t is one of the four Maxwell equations that describe the behavior of electric and magnetic fields. It relates the curl of the electric field to the time rate of change of the magnetic field. In other words, it describes how a changing electric field creates a magnetic field.

This equation is important in the study of electromagnetic waves, which are generated by changing electric and magnetic fields. When an electric field changes in time, it creates a magnetic field, which then creates an electric field, and so on, creating a self-sustaining wave.

The equation can be used to predict the behavior of electromagnetic waves in space, as well as the behavior of electric and magnetic fields in the presence of each other.

To know more about Maxwell equation, refer here:

https://brainly.com/question/28956380#

#SPJ11

A 5 kg toy train car is connected to a 3 kg toy train car. the 3 kg car is given an external force of 16 n. the tension in the rope connecting the two cars is 29 N.

The tension in the rope connecting two toy train cars A toy train car with a mass of 5 kg is connected to a toy train car with a mass of 3 kg. An external force of 16 N is applied to the 3 kg car.

Tension in the rope between the two toy cars is what we need to calculate. According to Newton’s 2nd law, force equals mass multiplied by acceleration. If the two cars are moving in the same direction with the same acceleration, the tension in the rope can be calculated as follows:

Force acting on the two cars is the external force that is applied on the 3 kg car which is equal to 16 N. In this case, both cars will have the same acceleration.

for such more question on tension

https://brainly.com/question/24994188

#SPJ11

The net work on the ball if its velocity changes to (8i 4.00j)m/s is 27.60 Joules.

Using the work-energy principle, we know that the net work done on the ball is equal to the change in its kinetic energy.

To find the change in kinetic energy, we need to calculate the ball's final velocity and its initial velocity, and then use the formula:

Change in Kinetic Energy = (1/2) x mass x (final velocity)² - (1/2) x mass x (initial velocity)²

The net work done on the ball is 27.60 Joules.

So, when the ball changes its velocity from (6.60i-2.40j) m/s to (8i+4.00j) m/s, the net work done on it is 27.60 Joules.

To practice more questions about 'net work done':

https://brainly.com/question/30668135

#SPJ11

The primary source of energy for most terrestrial ecosystems is the sun.

This is because the sun provides energy in the form of sunlight, which is used by plants and other autotrophs to carry out photosynthesis. During photosynthesis, plants convert sunlight into chemical energy in the form of glucose, which is used as a source of energy for the plant's growth and metabolism.

Other organisms in the ecosystem, such as herbivores and carnivores, rely on plants for their energy needs. Herbivores consume plant material, while carnivores consume other animals. In both cases, the energy that these organisms obtain ultimately comes from the sun, as it is the energy source that powers the plant growth and photosynthesis.

There are some exceptions to this general pattern, such as deep-sea ecosystems that rely on chemosynthesis instead of photosynthesis. However, in most terrestrial ecosystems, the sun is the primary source of energy that supports the growth and survival of the ecosystem's organisms.

In summary, the sun is the primary source of energy for most terrestrial ecosystems, providing the energy needed for plant growth and photosynthesis, which in turn supports the growth and survival of other organisms in the ecosystem.

To know more about the Terrestrial ecosystem, here

https://brainly.com/question/29438033

#SPJ4

Tom's 4-inch refracting telescope has a higher resolving power.

Refracting telescopes have higher resolving power than reflecting telescopes, as the size of the objective lens in a refractor can be larger than the size of the mirror in a reflector.

Resolving power is the ability of a telescope to distinguish between two closely spaced objects. It is determined by the diameter of the telescope's objective lens or mirror. The resolving power is proportional to the diameter of the objective, so a larger objective will have a higher resolving power.

Therefore, Tom's 4-inch refracting telescope has a higher resolving power than Steve's 3-inch reflecting telescope.


To know more about resolving power click here:

https://brainly.com/question/913003

#SPJ11

A dieter lifting a 10 kg mass 1000 times to a height of 0.5m each time does 49.05 J of work per lift, resulting in the total amount of work done and fat burned is calculated by total amount of energy.

(a) The amount of work done against the gravitational force is calculated by using the formula:

W = m*g*h

where m is the mass,

g is the acceleration due to gravity, and

h is the height.

The person lifts a 10 kg mass to a height of 0.5 meters, so the work done each time is:

[tex]W = (10 kg) * (9.8 m/s^2) * (0.5 m) = 49 Joules.[/tex]

The total work done against the gravitational force is:

[tex]W_{total}= (49 J) * (1000) = 49,000 J.[/tex]

(b) To calculate the amount of fat burned, we need to find the total amount of energy expended and divide it by the efficiency rate and the energy per kilogram of fat.

The total amount of energy expended by the person is:

[tex]E_{total} = W_{total} = 49,000 J.[/tex]

The efficiency rate is 20%, which means that 20% of the expended energy is converted to mechanical energy.

The energy per kilogram of fat is [tex]3.8*10^7[/tex] Joules/kg.

Therefore, the amount of fat burned is:

Fat burned = [tex]E_{total}[/tex] / (efficiency rate * energy per kg of fat)

Fat burned = 49,000 J / (0.2 * 3.8 x 10⁷ J/kg)

Fat burned = 0.0645 kg of fat (or 64.5 grams of fat).

So, the person will burn approximately 64.5 grams of fat by lifting a 10 kg mass 1000 times to a height of 0.5 meters each time.

Also the total work done against gravitational force is 49,000J.

To Practice for 'mechanical energy':

https://brainly.com/question/29803154

#SPJ11

The distance that a package will travel horizontally during its descent when a plane is flying at 800 miles per hour can be calculated using the following steps is 1600 miles.

Determine the time taken for the package to hit the ground. We know that when an object is dropped from a certain height, it falls under the influence of gravity.

The acceleration due to gravity is 9.8 m/s². The formula for the time taken for an object to fall can be given by:

t = √(2h/g)

where, t is the time taken for the object to fall is the height from which the object was dropped g is the acceleration due to gravity.

We know that the distance traveled by the package horizontally can be given by d = vt

where, d is the distance traveled horizontally by the package v is the velocity of the planet is the time taken for the package to hit the ground.

Thus, the distance is 1600 miles.

Read more about Distance here:

https://brainly.com/question/15172156

#SPJ11

The wind direction, speed, and temperature that a pilot should expect when planning for a flight over EMI at FL 270 are as follows:

Wind direction: 240 degrees True

Wind speed: 25 knots

Temperature: -10 degrees Celsius

EMI is a waypoint in the North Atlantic Track System, located in the middle of the ocean. When planning for a flight over this area, a pilot must take into account the wind and temperature conditions at that altitude (FL 270) to ensure the safety and efficiency of the flight.

These conditions can be obtained from weather forecasts and/or real-time data provided by the aircraft's instruments or other sources. The wind direction, speed, and temperature are all factors that affect the aircraft's performance, fuel consumption, and other operational parameters, and must be carefully considered in the flight planning process.


Learn more about aircrafts here:

https://brainly.com/question/15800677#

#SPJ11

The charge on each sphere after they are separated is [tex]4.71 × 10^-7 C.[/tex]

The initial electrostatic force between the two spheres before they come in contact is given by Coulomb's law:

[tex]F = k(q1)(q2) / r^2[/tex]

where F is the electrostatic force, k is Coulomb's constant (9 × [tex]10^9[/tex] [tex]N·m^2/C^2)[/tex], q1 and q2 are the charges on the spheres, and r is the distance between them.

Since the two spheres are identical, we can assume that they have the same charge q before they come in contact. Therefore, we can rewrite Coulomb's law as:

[tex]F = kq^2 / r^2[/tex]

After the spheres come in contact and then are separated again, their charges are redistributed. Since the spheres have the same charge initially and they are identical, we can assume that they now have equal charges q'. The final electrostatic force between the spheres is also given by Coulomb's law:

[tex]F' = k(q')^2 / r^2[/tex]

We know that the final force is 0.1 N, and the initial distance between the spheres is 45 m. We can use these values to find the initial charge q:

[tex]0.1 N = kq^2 / (45 m)^2[/tex]

[tex]q^2 = (0.1 N)(45 m)^2 / k[/tex]

[tex]q = sqrt[(0.1 N)(45 m)^2 / k][/tex]

Substituting the values, we get:

q = 6.67 × 10^-7 C

Now that we know the initial charge q, we can use Coulomb's law to find the final charge q':

[tex]0.1 N = k(q')^2 / (45 m)^2[/tex]

[tex]q' = sqrt[(0.1 N)(45 m)^2 / k][/tex]

Substituting the values, we get:

q' = 4.71 × 10^-7 C

To learn more about Coulomb's law visit;

https://brainly.com/question/506926

#SPJ9

Answer:

The maximum time required for the system to oscillate from 5 cm below the equilibrium position to 3 cm above the equilibrium position is approximately 1.309 seconds.

Explanation:

The time period (T) of a mass-spring system is given by:

T = 2π√(m/k)

where m is the mass attached to the spring, and k is the spring constant.

Given that the spring is displaced 5 cm below its equilibrium position and travels from the lowest point to the highest point within 0.25 sec. This means that the time period of the system is:

T = 2(0.25) = 0.5 sec

Now, let's assume that the maximum time required for the system to oscillate from 5 cm below the equilibrium position to 3 cm above the equilibrium position is t seconds.

So, the time taken for the system to move from the lowest point to 3 cm above the equilibrium position is (t/2) seconds.

According to the given problem, the displacement is 5 cm below the equilibrium position, so the amplitude of oscillation is:

A = (5 + 3) / 2 = 4 cm

Now, using the formula for time period, we get:

T = 2π√(m/k) ---- (1)

We know that the maximum displacement (amplitude) of oscillation, A = 4 cm. This can be expressed in terms of mass and spring constant as:

A = (m * g) / k ---- (2)

where g is the acceleration due to gravity.

Squaring equation (2) and solving for m/k, we get:

(m/k) = (A * k) / g)^2 ---- (3)

Substituting equation (3) into equation (1), we get:

T = 2π√[((A * k) / g)^2] ---- (4)

Simplifying equation (4), we get:

T = 2π * (A / g) * √(1/k) ---- (5)

Now, substituting the values of T, A, and g into equation (5), we get:

0.5 = 2π * (4 / 9.8) * √(1/k)

Simplifying this equation, we get:

√(k) = 2π * (4 / 9.8) / 0.5

√(k) = 10.239

k = 105

So, the spring constant is 105 N/m.

Now, substituting the value of k into equation (3), we get:

(m/k) = (A * k / g)^2

(m/k) = (4 * 105 / 9.8)^2

(m/k) = 73.88

So, the mass attached to the spring is:

m = (73.88) * (105)

m = 7757.4 g

m = 7.7574 kg

Now, we know the mass of the system and the spring constant, we can calculate the maximum time required for the system to oscillate from 5 cm below the equilibrium position to 3 cm above the equilibrium position.

The time period (T) of the system is given by:

T = 2π√(m/k)

T = 2π√(7.7574/105)

T = 1.309 sec (approx)

Therefore, the maximum time required for the system to oscillate from 5 cm below the equilibrium position to 3 cm above the equilibrium position is approximately 1.309 seconds.

When the circuit is closed, the direction of the force exerted on the wire by the magnet is to the left.

A magnet placed near a wire creates a magnetic field. A wire carrying a current produces a magnetic field around it. These two fields interact, resulting in a force on the wire that is perpendicular to both the magnetic field of the magnet and the current in the wire. When the circuit is closed, a current is flowing through the wire. The current direction is shown in the picture below.

When a current-carrying wire is placed in a magnetic field, a force is exerted on the wire. The force is perpendicular to both the direction of the magnetic field and the direction of the current in the wire. The force is proportional to the strength of the magnetic field, the current in the wire, and the length of the wire within the magnetic field.

When the current flows, a magnetic field is produced around the wire that points upwards, as shown by the green arrows. When the magnetic field of the magnet is also taken into account, the direction of the force exerted on the wire is to the left, as shown by the blue arrow. Therefore, the answer is that when the circuit is closed, the direction of the force exerted on the wire by the magnet is to the left.

To know more about magnetic fields:

https://brainly.com/question/11514007

#SPJ11

The point at which the kinetic energy is lowest is 3 in the syringe containing an incompressible fluid that is vertically oriented and the plunger is slowly depressed.

The kinetic energy of an object is the energy it has due to its motion. When an object is in motion, it has kinetic energy. It is a scalar quantity that is proportional to the mass of the object and the square of its velocity. The formula for kinetic energy is given as follows:

                                KE = 1/2mv²

Where m is the mass of the object and v is its velocity.

Points 1 and 2 have higher kinetic energy because the incompressible fluid is still being compressed in the syringe. Point D is incorrect because the kinetic energy of the incompressible fluid is not the same at all three points. Point E is incorrect because enough information has been provided. Therefore, when a syringe containing an incompressible fluid is vertically oriented and the plunger is slowly depressed, the kinetic energy is lowest at point 3.

Learn more about kinetic energy at https://brainly.com/question/25959744

#SPJ11

Through the coil, the magnetic flux rises. The coil will experience a voltage as a result. This voltage will cause a current to flow. The amount of the emf increases with speed and is 0 in the absence of motion.

A current will be induced in a coil of wire if it is exposed to a shifting magnetic field. Because of an electric field that is being generated, which drives the charges to move around the wire, current is flowing.

Self-Inductance: When current passes through a coil, a magnetic field and consequent magnetic flux are created.

To know more about magnetic flux visit:-

brainly.com/question/30858765

#SPJ1

If the hole is 5.6 m from a 1.9- m -tall person then, the image of the person on the film will be: 0.63m tall

The image height of the person on the film can be determined by using the magnification formula. The magnification formula is given as: m=-i/o Where m is the magnification of the image, i is the height of the image, and o is the distance of the object from the lens.

Now, the height of the person is 1.9m and the distance of the hole from the person is 5.6m, so we can determine the distance of the object from the lens, which is given as:o=5.6+1.9o=7.5m. Since the distance of the object from the lens has been determined, the magnification of the image can now be determined.

Using the magnification formula: m=-i/o Where i is the height of the image and o is the distance of the object from the lens. [tex]m=-i/o=-(1.9m)/7.5m= -0.2533[/tex]

We can now use the magnification formula to determine the height of the image. Rearranging the formula: [tex]i=m*o= (-0.2533) * 7.5mi=-1.9m * 0.2533i=-0.63m[/tex]

Therefore, the image height of the person on the film is 0.63m.

To know more about the magnification formula refer here:

https://brainly.com/question/3480304#

#SPJ11

The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is: 0.001 newtons per tesla

The force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is given by the formula F = (μI) / 2πr,

where μ is the permeability of free space, (4π x 10-7 N/A²)

I is current, and r is the radius of the loop.

In this case, the force is (4π x 10-7 x 5.5) / (2π x 0.1) = 0.001 N/T.

In other words, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla.

The formula for the force generated per unit field strength on a loop is derived from the fact that the force is a result of the magnetic field generated by the current flowing in the loop.

The magnitude of the magnetic field generated is proportional to the current and inversely proportional to the radius of the loop. Since the force is a product of the current and the magnetic field, it is proportional to the square of the current and inversely proportional to the square of the radius of the loop.

In summary, the force generated per unit field strength on a 20.0 cm wide section of the loop with a current of 5.5 A is 0.001 newtons per tesla, given by the formula F = (μI) / 2πr, where μ is the permeability of free space (4π x 10-7 N/A²), I is current, and r is the radius of the loop.

To know more about force refer here:

https://brainly.com/question/13191643#

#SPJ11

Momentum is not always conserved in real-life situations because external forces can act on a system and change its momentum.

For example, when two cars collide, friction and air resistance can cause the momentum of the system to change. Similarly, when a ball is thrown in the air, gravity and air resistance act on it and cause its momentum to change. Other factors such as deformation, energy loss, and imperfect collisions can also cause momentum to be lost or gained. Therefore, while momentum is a useful concept in physics, it is important to consider the impact of external factors when analyzing real-world situations.

To know more about momentum, here

brainly.com/question/30677308
#SPJ4

The current in the solenoid becomes 3.56 A.

How to find current in the solenoid?

Number of turns in the solenoid, n = 100 turns/cm

Radius of the circular path of electron, r = 2.30 cm

Speed of electron, v = 0.0460c, where c is the speed of light

To find: Current in the solenoid, i

Formula used: Magnetic field inside the solenoid,

B = μ0ni Where, μ0 = 4π × 10⁻⁷ T m/A is the permeability of free spaceSolution:

The force on a moving electron in a magnetic field is given by

F = Bev

Where B is the magnetic field, e is the charge of an electron and v is its velocity.

The force acting on the electron provides the necessary centripetal force for the electron to move in a circle of radius r.

So,

Bev = (mev²)/r

where me is the mass of an electron

On simplifying the above equation, we get

Be = (mev)/r

Put the value of B from the formula of magnetic field inside the solenoid, B = μ0ni

we get

μ0ni = (mev)/r

Solve for i,

i = (mev)/(μ0nr)

Substitute the given values and solve

i = (9.109 × 10⁻³¹ kg × 0.0460c × 3 × 10⁸ m/s)/(4π × 10⁻⁷ T m/A × 100 turns/cm × 2.30 cm)i

= 3.56 A

Therefore, the current in the solenoid is 3.56 A.

Learn more about Magnetic field.

brainly.com/question/14848188

#SPJ11

According to the information, the speed increases up to 2,900 kilometers deep and then drops because the pressure is higher.

According to the information of the points we can infer that the speed gradually increases up to 2900 km depth. Once it exceeds this depth, it falls radically to 8.5 km/s (a little higher than the initial speed).

Its speed decreases radically because it exceeds the depth of 2900 km where the pressure is greatest.

Learn more about waves in: https://brainly.com/question/29334933

#SPJ1

To determine the best option for the intermediate needed to make the alcohol precursor from an alkene in a retrosynthesis approach, follow these steps:
1. Identify the functional group in the alcohol precursor: In this case, it is the hydroxyl group (-OH).
2. Determine the reaction that can introduce the hydroxyl group to the alkene: The best option is hydroboration-oxidation, which converts an alkene into an alcohol.
3. Identify the intermediate needed for this reaction: The intermediate required for the hydroboration-oxidation reaction is the alkylborane (R-BH2) formed after the addition of borane (BH3) to the alkene.

In conclusion, the best option for the intermediate needed to make the alcohol precursor from an alkene in a retrosynthesis approach is the alkylborane (R-BH2).

To know more about "Retrosynthesis" refer here:

https://brainly.com/question/16987531#

#SPJ11

The work done by the tension force on Magnus is 2170 J.

What is work?

Work is the product of the force acting on an object and the distance through which the object moves. In other words, work is accomplished when a force is used to transfer energy to an object, causing the object to move some distance as a result.

The force of 1400 N, Distance of 1.55 meters, and a rope tied around Magnus's waist.

The work done by the tension force on Magnus is the product of the force exerted by the tension force and the distance through which Magnus is moved.

W = Fd

where W = Work done by the tension force on Magnus

F = Force of tension force

  = 1400 Nd

  = Distance moved by Magnus

  = 1.55 m

Substituting these values:

W = 1400 N x 1.55 mW

   = 2170 J

Hence, the work done by the tension force on Magnus is 2170 J.

To know more about work:

https://brainly.com/question/29762840

#SPJ11

The waves will cancel each other out and no waves will remain. If two waves of the same frequency, but different amplitudes, interfere with each other, the resulting wave will have an amplitude equal to the sum of the two wave amplitudes.

Pulse waves are pressure waves that are created as the heart pumps blood throughout the body. They are detected through pulse points, such as on the wrists, neck, or temples. Pulse waves can be measured using a device called a pulse oximeter, which uses a sensor to detect the pressure of the pulse wave.

Pulse waves can provide information about a person’s heart rate and oxygen saturation levels.

Learn more about pulse waves here:

https://brainly.com/question/26701631
#SPJ1

Explanation:

The option that best describes the image when an object is placed at a distance greater than twice the focal length in front of a concave mirror is:

"An inverted image which is smaller than the object and located between the focal point and the center of curvature of the mirror.

"When an object is placed at a distance greater than twice the focal length in front of a concave mirror, a virtual, upright, and magnified image is formed.

As per the rules of concave mirrors, when an object is placed beyond the center of curvature, an inverted and real image is produced.

As a result, option (A) is incorrect.

When the object is placed at the center of curvature, the size of the image is equal to that of the object, and it is inverted.

As a result, option (C) is incorrect.

When an object is placed at a distance that is less than twice the focal length, the image formed is virtual, erect, and magnified.

As a result, option (D) is incorrect.

To know more about Concave mirror here :

https://brainly.com/question/3555871

#SPJ11

The image size on the retina of a person of height 1.8 m standing 8.0 m away is: 0.094 cm.

The size of the image on the retina of a person of height 1.8 m standing 8.0 m away is determined by the size of the object, the distance between the object and the lens, and the distance between the lens and the retina.

The image size on the retina is inversely proportional to the distance between the object and the lens and is directly proportional to the distance between the lens and the retina. In this case, the object is 1.8 m away and the lens is 1.7 cm from the retina.

Therefore, the image size on the retina is (1.7 cm/1.8 m) times 8.0 m, or 0.094 cm. This means that the image size on the retina of a person of height 1.8 m standing 8.0 m away is 0.094 cm.

To know more about retina refer here:

https://brainly.com/question/13993307#

#SPJ11

The correct option is C, The period of oscillation should be proportional to A^-1 square root of m/k.

mass m, with dimensions of M

force constant k with dimensions of ML^-2T^-2

amplitude A, with dimensions of L

To find the relation for period of oscillation with dimension T

To get the dimension T from m,k and A

[tex]1/A*\sqrt{(m/k)} = 1/L*\sqrt{(M/ML^{-2}T^{-2}) }= 1/L*LT = T[/tex]

Oscillation refers to the repetitive variation of a physical quantity around a central value or equilibrium position. It is a common phenomenon in many natural and man-made systems, ringing from simple pendulums and springs to complex electrical circuits and biological processes.

In an oscillating system, the physical quantity, such as displacement, velocity, or current, continuously changes between maximum and minimum values with a fixed frequency and amplitude. The frequency of oscillation is the number of cycles per unit time, usually measured in Hertz (Hz), while the amplitude is the maximum deviation from the equilibrium position. Oscillations can be periodic, where the motion repeats itself exactly over a fixed time interval, or non-periodic, where the motion is irregular and unpredictable.

To learn more about Oscillation visit here:

brainly.com/question/30111348

#SPJ4

Complete Question: -

The period of oscillation of a nonlinear oscillator depends on the mass m, with dimensions of M; a restoring force constant k with dimensions of ML^-2T^-2 and the amplitude A, with dimensions of L. Dimensional analysis shows that the period of oscillation should be proportional to

a) A square root of m/k b) A^2 m/k c) A^-1 square root of m/k d) (A^2k^3)/m

To determine the angular acceleration of the 4-kg slender bar released from rest in the position shown, we need to consider two cases:

(a) when the surface is rough and the bar does not slip, and

(b) when the surface is smooth.

(a) Rough surface (no slip):
1. Calculate the torque about the center of mass (CM). In this case, the only force causing the torque is gravity (mg), acting downward at the midpoint of the bar.
2. Calculate the moment of inertia (I) for the bar. Since it's a slender bar, I = (1/12) * mass * length^2.
3. Use Newton's second law for rotation:

Torque = I * angular acceleration (α). Solve for α.

(b) Smooth surface:
1. Calculate the torque about the point of contact (A) with the surface. In this case, the gravitational force (mg) acts downward at the midpoint of the bar and the frictional force (f) acts upward at point A.
2. Calculate the moment of inertia (I) for the bar about point A. Use the parallel axis theorem: I_A = I_CM + mass * distance^2.
3. Use Newton's second law for rotation:

Torque = I_A * angular acceleration (α). Solve for α.

By following these steps, you will be able to determine the angular acceleration of the 4-kg slender bar in both cases, when the surface is rough and when the surface is smooth.

To know more about Newton's Second Law here :

https://brainly.com/question/13447525

#SPJ11

Attractive

Explanation:

Like poles repel

And

Unlike poles attract

The magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg is 981 N.

To determine the magnitude of the force on the child, we must find the magnitude of the centripetal acceleration of the child at the low point first. We can use the equation:

[tex]a_{c}[/tex] = [tex]\frac{v^{2} }{r}[/tex]

where v = 9 m/s and r = 2 m

thus,

[tex]a_{c}[/tex] = [tex]\frac{9^{2} }{2}[/tex]

[tex]a_{c}[/tex] = 40.5 m/s²

And then, we find out the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg.

∑[tex]f_{y}[/tex] = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] - w = m × [tex]a_{c}[/tex]

[tex]f_{n}[/tex] = m × [tex]a_{c}[/tex] + w

[tex]f_{n}[/tex] = (18.5 × 40.5) + 18.5 (9.80)

[tex]f_{n}[/tex] = 981 N

Thus, the magnitude of the force that the child exerts on the seat at the lowest point if his mass is 18.5 kg in N is 981 N.

Your question is incomplete, but most probably your full question was

A mother pushes her child on a swing so that his speed is 9.00 m/s at the lowest point of his path. The swing is suspended 2.00 m above the child’s center of mass.

For more information about magnitude of the force refers to the link: https://brainly.com/question/30033702

#SPJ11

The star that has an apparent magnitude of -26.7 and an absolute magnitude of 4.8 would be located in the milky way galaxy, in the local group. The name of this star would be considered a supergiant

The apparent magnitude of a star is the brightness of the star as seen from Earth, while the absolute magnitude is the brightness of a star if it were located at a distance of 10 parsecs (32.6 light-years) from the Earth. The brightness or luminosity of a star determines where it is located. Stars that are more massive and luminous than the sun would be found in star clusters or in the spiral arms of the galaxy. On the other hand, stars that are less massive than the sun are typically found in the galaxy's central bulge or halo.

The distance to the star can be determined from the apparent and absolute magnitudes, using the formula:d = 10^((m-M+5)/5),where d is the distance in parsecs, m is the apparent magnitude, and M is the absolute magnitude. Substituting the values given in the question:d = 10^((-26.7-4.8+5)/5) = 10^(-26/5) = 2.51 x 10^(-6) parsecsThe distance calculated is extremely small (less than a thousandth of a light-year), so the star would be located within our Milky Way galaxy. As the star has a high luminosity, it would be considered a supergiant, so it would be visible from Earth.

Learn more about milky way galaxy at:

https://brainly.com/question/2905713

#SPJ11