f a ball is thrown into the air with an initial velocity of 46 ft/s, its height in feet after t seconds is given by y

The woman needs to climb a step of 1.05 m to work off her breakfast.

The potential energy of an object is the energy that is stored in the object due to its position above the ground level.

The potential energy of the woman can be used to determine the number of steps she needs to climb.

potential energy + heat energy = chemical energy

1 kcal = 4184 J

0.540 kcal = ?

= 2259.36 J

P.E = mgh

55 x 9.8 x h = 0.25(2259.36)

h = 1.05 m

Thus, the woman needs to climb a step of 1.05 m to work off her breakfast.

Learn more about potential energy here: https://brainly.com/question/14427111

#SPJ1

The emf induced in the coil as a function of time is 2.2 mV.

The emf induced in the coil is calculated as follows;

emf = NAdB/dt

where;

A is area of the coil, A = πr² = π(2.7 x 10⁻³)² = 2.29 x 10⁻⁵ m².

dB/dt = 3.2cos(1046π) = 3.2

emf = (30 x 2.29 x 10⁻⁵ x 3.2) = 2.2 x 10⁻³ V

emf = 2.2 mV

Thus, the emf induced in the coil as a function of time is 2.2 mV.

Learn more about induced emf here: https://brainly.com/question/13744192

#SPJ1

The average normal strain in wires A, C and D is found to be 0.035, 0.035 and 0.059 respectively when there is a change in the angle by 2° clockwise.

A physical measurement called strain illustrates how much an object's dimensions vary while it is under stress. The ratio between the object's changed length and its initial length is known as the linear strain.

All wires are stretched when the stiff lever rotates 2° in a clockwise direction around pin B.

Elongation would be R x angle in radian

Elongation in the wire A = 200 mm x 3.142 x 2/180 = 6.982 mm

Elongation in the wire C = 300 x 3.142 x 2/180 = 10.473 mm

Elongation in the wire D = 500 x 3.142 x 2/180 = 17.455 mm

Therefore,

Average normal strain in the wire A = 6.982/200 = 0.03491

Average normal strain in the wire C = 10.473/300 = 0.03491

Average normal strain in the wire D = 17.455/300 = 0.05818

Learn more about Strain here:

https://brainly.com/question/17147070

#SPJ4

Answer:

5000N

Explanation:

Force is given by the formula F = ma where m is the mass and a the acceleration

Plugging in given values of m and a gives us

F = 1000 kg x 5 m/s² = 5000 Newtons or simply 5000N

Explanation:

Endothermic reaction as heat from the environment is absorbed.

the transformation from solid to liquid is due to the latent heat of fusion/ enthalpy of fusion.

the heat energy absorbed from the environment is used to break the bonds of the solid structure therein converting it to a liquid. this is the reason why the temperature of the substance is constant at the state changes.

The total resistance of the RLC series circuit is determined as 20 ohms.

The total resistance of the RLC series circuit is calculated as follows;

R = Vrms / Irms

where;

Substitute the given parameters and solve for the total resistance

R = (180) / (9)

R = 20 ohms

Thus, the total resistance of the RLC series circuit is determined as 20 ohms.

Learn more about total resistance of RLC circuit here: https://brainly.com/question/27387167

#SPJ1

The distance of a car that accelerates at 4 m/s² until it reaches 36 m/s is 162m.

The distance moved by a body can be calculated using the following formula:

S = ut + ½at²

Where;

However, the time taken must be calculated first as follows:

t = 36m/s ÷ 4m/s²

t = 9s

S = 0 × t + ½ × 4 × 9²

S = 0 + ½ × 81 × 2

S = 162m

Therefore, the distance of a car that accelerates at 4 m/s² until it reaches 36 m/s is 162m.

Learn more about distance at: https://brainly.com/question/13511093

#SPJ1

Speed of light in terms of astronomical unit is 0.12AU/min.

The astronomical unit (symbol: au, or AU) is a measurement of length that is approximately 150 million kilometers (93 million miles) or 8.3 light minutes long, representing the distance between the Earth and the Sun. As Earth orbits the Sun, its actual distance from the Sun changes by roughly 3%, going from its greatest value (aphelion) to its smallest value (perihelion), and back again, once a year. Originally intended to represent the average of Earth's aphelion and perihelion, the astronomical unit has been precisely defined as 149597870700 m since 2012. The astronomical unit is mostly used to calculate distances within or around other stars and other solar systems. It is also a crucial element in the definition of the parsec, another astronomical measure of length.

To know more about astronomical unit, visit:

https://brainly.com/question/8590563

#SPJ4

Answer:

Hope my answer is understandable to you.

Considering the definition of velocity, the magnitude of the helicopter's displacement is 700 meters.

Velocity is a physical magnitude that relates the displacement of an object, the time it takes to make this change in position and direction.

In other words, the velocity can be defined as the amount of space traveled per unit of time with which a body moves, considering the direction.

The velocity can be calculated using the expression:

velocity= displacement÷ time

In this case, you know:

Replacing in the definition of velocity:

70 m/s= displacement÷ 10 s

Solving:

70 m/s× 10 s= displacement

700 m= displacement

Finally, the magnitude of the helicopter's displacement is 700 meters.

Learn more about velocity:

brainly.com/question/25008118

brainly.com/question/4418301

brainly.com/question/24990123

brainly.com/question/14244558

brainly.com/question/25288184

#SPJ1

The distance should be 4m from the wire in order to get the magnetic field of 0.100μ .

It is given that magnetic field 40.0 cm away from a straight wire is  1.00μT having  current 2.00 A .

From equation (1)  magnetic field 40.0 cm = 0.4m away from a straight wire is 1.00μT which is given by    [tex]1.00=\frac{u_0I}{2\pi \times0.4}[/tex]      .....(2)

From equation (1)  magnetic field 'r' m away from a straight wire is 0.100μT which is given by    [tex]0.100=\frac{u_0I}{2\pi \times r}[/tex]       ...(3)

On dividing equation (2) by (3) , we get

             [tex]\frac{1}{0.1} =\frac{r}{0.4} \\\\r=4m[/tex]

Learn more about magnetic field here :

https://brainly.com/question/27939568

#SPJ4

Dropped from a bridge and allowed to fall freely to the ground is an object. Modeling the object's height over time using h(t) = 144 - 16t2 is possible

An item that is falling only due to gravity is said to be in free fall. This means that any moving object that is simply being affected by gravity is said to be "in a condition of free fall." An item of this kind will accelerate downhill at a rate of 9.8 m/s/s. If an item is just moving in one direction—downward or upward toward its peak—and is only affected by gravity, then its acceleration value is 9.8 m/s/s.

The initial velocity of an object being dropped from a height is zero meters per second (m/s) as opposed to being hurled.

To know more about Freefall visit:

https://brainly.com/question/24401643

#SPJ4

Answer:

the energy of photon will be half.

Explanation:

If you need a deeper explanation please let me know. Hope I helped!

The intensity delivered to the eardrum is [tex]3.0 \times {10^{ - 8}}\,W/{m^2}$[/tex].

The area is measured on a plane perpendicular to the direction of the energy's transmission, and the power transferred per unit area is known in physics as the intensity or flux of radiant radiation. The SI system's fundamental units are watts per square meter. The average power transmission across the course of a wave, such as sound waves or electromagnetic waves like light or radio waves, is referred to as the "intensity" of the wave. The term "intensity" can be used to characterize a wide range of energy exchange scenarios. For example, one may calculate the amount of kinetic energy that each drop of water from a sprinkler is carrying. It is possible to determine intensity using the energy density.

Calculations:

[tex]${\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_1}}}{{{I_0}}}} \right)$ and ${\beta _2} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}}} \right)$$ = {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}}} \right) - 10{\log _{10}}\left( {\dfrac{{{I_1}}}{{{I_0}}}} \right)$[/tex][tex]$ \ {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_0}}} \times \dfrac{{{I_0}}}{{{I_1}}}} \right)$ [Using $\log a - \log b = \log \left( {\dfrac{a}{b}} \right)$][/tex]

[tex]$ \arrow = {\beta _2} - {\beta _1} = 10{\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_1}}}} \right)$\[ \arrow = \dfrac{{{\beta _2} - {\beta _1}}}{{10}} = {\log _{10}}\left( {\dfrac{{{I_2}}}{{{I_1}}}} \right)\][/tex]

[tex]\[ \arrow ={10^{\dfrac{{{\beta _2} - {\beta _1}}}{{10}}}} = \dfrac{{{I_2}}}{{{I_1}}}\]\[ \arrow ={I_2} = {I_1}{10^{\dfrac{{{\beta _2} - {\beta _1}}}{{10}}}}\]Thus, we have ${I_2} = 3.0 \times {10^{ - 11}}\,W/{m^2} \times {10^{\dfrac{{30.0}}{{10}}}}$$ \arrow= {I_2} = 3.0 \times {10^{ - 11}} \times {10^3}\,W/{m^2}$$ \arrow ={I_2} = 3.0 \times {10^{ - 8}}\,W/{m^2}$[/tex]

To learn more about intensity ,visit:

https://brainly.com/question/17583145

#SPJ4

When thermal energy is removed from particles, then the particles' kinetic energy decreases (Option D).

The expression particles' kinetic energy makes reference to the amount of motion energy (i.e. energy in movement) that contain the particles of an object, which depends on the temperature of the material.

In conclusion, when thermal energy is removed from particles, then the particles' kinetic energy decreases (Option D).

Learn more about particles' kinetic energy here:

https://brainly.com/question/17978589

#SPJ1

The car's acceleration would be for a mass of 4 kg is 3 m/s²

Given the information below:

12 Newtons of force.

Increasing speed Equals

By using Newton's Second Law of Motion, we can determine the mass of the car:

According to Newton's second law of motion, force is equal to the rate at which momentum changes. Force is defined as mass times acceleration for a constant mass.

force= mass* acceleration

This formula provides Newton's Second Law of Motion mathematically;

12= mass*3

mass=12/ 3

mass=4 kilogram

By changing the parameters in the formula, we obtain;

= 4 kilos of mass.

As a result, the vehicle with a mass of 4 kg would accelerate at 3 m/s².

Learn more about motion here-

brainly.com/question/22810476

#SPJ4

Given:

[tex]speed,\;v=449\;m/s[/tex]

We know that,

[tex]adiabatic index, \gamma = 1.667[/tex]

[tex]gas constant,\;R=8.314\;J[/tex]

The form speed of the sound in a monoatomic gas is,

[tex]v=\sqrt{\frac{\gamma\;R\;T}{M} }[/tex]

Substitute the known values in the above equation,

[tex]449=\sqrt{x} \frac{1.667 \times 8.314 \times 293}{M}[/tex]

[tex]M=\sqrt{x} \frac{1.667 \times 8.314 \times 293}{449}[/tex]

[tex]M=0.02014 \times (\frac{1000}{1})[/tex]

[tex]M=20.14\;g/mol[/tex]

Therefore, monoatomic gas is Neon gas (Ne)

Monatomic gas, which differs from diatomic, triatomic, or generally polyatomic gases in that it contains particles (molecules) made up of just one atom, includes gases like helium or sodium vapor. Because a monatomic gas lacks the rotational and vibrational energy components that characterize polyatomic gases, its thermodynamic behavior in the normal temperature range is incredibly straightforward. As a result, its heat capacity is independent of temperature and molecular weight (in this case, atomic weight), and its entropy (a measure of disorder) only depends on temperature and molecular weight.

To learn more about monoatomic gas, visit:

https://brainly.com/question/20024538

#SPJ4

The force acting on a car will be an action type of force.

The effects of net force and mass on a material's acceleration are described by Newton's second law. Newton's second law is given as,

F = ma

Where m is the mass, a is the acceleration, and F is the force acting on a body.

The forces that actually affect a body's acceleration are referred to as the active forces when a specific body is under discussion. Ignore the resistance the car's front tires experience to make things easier.

A force of the action kind will be exerted on an automobile.

More about Newton's second law link is given below.

https://brainly.com/question/26751052

#SPJ4

The electric flux through the surface is 5.65×〖10〗^2 Nm^2/C ≈5.6×〖10〗^2  Nm^2/C

The electric flux through a surface describes the number of electric field lines that cross that surface. It is expressed as the surface integral of the electric field through that surface.

Gauss's law states that for a closed surface, the electric flux through that surface depends only on the total charge present inside that surface. Hence, for a closed surface, the electric flux can be computed without evaluating any integrals.

The charges are: q1=3.0nC, q2=−2.0nC, q3=−7.0nC, and q4=1.0nC

Gauss's Law provides that the net electric flux through a closed surface depends only on the net charge enclosed by the surface, by the equation:

ϕ=Qnet÷ϵ0

where,

Φ is the net electric flux through the closed surface.

Qnet is the net charge enclosed by the surface.

∈_0=8.85×〖10〗^(-12) C^2/Nm^2 is the permittivity of free space.

The net charge inside the box is:

Qnet = q1+q2+q3+q4

=3.0nC−2.0nC−7.0nC+1.0nC

= −5.0nC=−5.0×10−9C

The net electric flux through the box is:

Φ=Q_net/∈_0

Φ=(-5.0×〖10〗^(-9) C)/(8.85×〖10〗^(-12) C^2/Nm^2 )

Φ=5.65×〖10〗^2 Nm^2/C ≈5.6×〖10〗^2  Nm^2/C

To learn more about charges inside a cavity. Click, https://brainly.com/question/14776586.

#SPJ4

Answer:

he would tap on the "close tab "button and see old the apps he has used in that period

Explanation:

A boat travels 12. 0 m while reduces its velocity from 9. 5 m/s to 5. 5 m/s, while it travels the 12. 0 m, the acceleration of the boat is -2.5 m/s²

The rate at which an object's velocity with respect to the time changes is referred to as acceleration. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration. According to Newton's Second Law, the amount of an object's acceleration is the combined result of two causes:

The given parameters;

distance traveled by boat, d = 12 m

initial velocity of boat, u = 9.5 m/s

final velocity of boat, v = 5.5 m/s

The acceleration of boat is calculated as;

[tex]v^{2}=u^{2}+2as\\ a=\frac{v^{2}-u^{2} }{2s}\\ a=\frac{5.5^{2}-9.5^{2} }{2*12}[/tex]

a=-2.5m/[tex]s^{2}[/tex]

Thus, the deceleration of boat is 2.5 m/s².

To know more about acceleration visit: https://brainly.com/question/12550364

#SPJ4

The electric field at a distance of 7.00 cm is 8.60×10^−2C/m2

The charge per unit area of wall is

σ = (8.60×10^−6C/cm2)( 100cm /m)^2 = 8.60×10^−2C/m2

The electric field at a distance of 2.00 cm is then

E =  σ /7∈0  = (8.60×10^−2C/m^2) / 7(8.85×10−12C2/N⋅m2)

= 1.38×10^9N/C away from the wall.

Electric field, an electric property associated with each point in space when the charge is present in any form. The magnitude and direction of the electric field are expressed by the value of E, called electric field strength or electric field intensity or simply the electric field.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ4

Answer:

Im not sure if this is correct but it might be 15.3

Explanation:

8.5kg multiplied by 1.8 m/s is 15.3

Answer:

KE = 13.77 J

Explanation:

KE=1/2 mv^2

Answer:

net force= -50N +70N

=20N

Explanation:

The balls are moving in opposite directions as indicated and to the right is (-) while to left is (+). Therefore net force is equal to sum of the force

The cue ball travels to the left with a force of +70 N and collides with the four-ball moving towards the right with a force of -50 N.

A push or a pull that alters or tends to alter an object's uniform motion or state of rest, as well as altering an object's direction or shape, is referred to as force. It either accelerates items or increases the pressure they are under. The interaction between two items is, to put it simply, a push or a pull on the object. It is the fundamental driver of motion starting from stillness.

Given information according to the question,

The cue ball travels to the left with a force of +70 N and,

The force by four balls moving to the right is -50 N.

Net force, N = 70 N - 50 N

N = 20 N towards the left direction.

To know more about Force :

https://brainly.com/question/13191643

#SPJ2

While current is the same in series and parallel, voltage is not. Therefore, because these three resistors are connected in parallel, their voltage is the same, or 12 volts. Using the equation V=IR, 12V=I*10Ω gives you a current of 1.2A.

A resistor is a passive two-terminal electrical component used in circuits to implement electrical resistance. Resistors have a variety of purposes in electronic circuits, reducing current flow, modifying signal levels, dividing voltages, biassing active components, and terminating transmission lines are a few examples. High-power resistors that can generate many watts of heat instead of electrical energy can be utilised as test loads for generators, power distribution systems, and motor controls. Fixed resistors' resistances only sporadically vary as a result of changes in operating voltage, time, or temperature. Variable resistors can be utilised as force sensors, heat sensors, light sensors, volume controls, lamp dimmers, humidity sensors, and chemical activity sensors.

To learn more about resistor,visit:

https://brainly.com/question/22718604

#SPJ4

The wavelength of initial node is 2.34m.

The wavelength, which in physics refers to the length over which a periodic wave repeats, is its spatial period. It is the distance between two successive corresponding wave points of the same phase, such as two neighboring crests, troughs, or zero crossings, and it is a feature of both traveling waves and standing waves, as well as other spatial wave patterns. The spatial frequency is defined as the wavelength's inverse. Greek letter lambda, which means "wavelength," is frequently used to denote it. Sometimes, modulated waves, their sinusoidal envelopes, or waves created by the interference of several sinusoids are all referred to by the term wavelength.

Wave lengthλ=[tex]\frac{v}{f} = \frac{343 m/g}{146.6/g} =2.34m[/tex].

To learn more about wavelength,visit:

https://brainly.com/question/4112024

#SPJ4

The average energy density of the solar component of electromagnetic radiation at this location is determined as 2.58 x 10⁻⁶ J.

The average energy density of the solar component of electromagnetic radiation at this location is calculated as follows;

U(avg) = (Brms)²/μ₀

U(avg) = (1.8 x 10⁻⁶)² / (4π x 10⁻⁷)

U(avg) = 2.58 x 10⁻⁶ J

Thus, the average energy density of the solar component of electromagnetic radiation at this location is determined as 2.58 x 10⁻⁶ J.

Learn more about average energy density here: https://brainly.com/question/13100708

#SPJ1

The force that gravitation exerts upon a body, equal to the mass of the body times the local acceleration of gravity is known as weight.

Weight is the force of gravity acting on a body.

The formula is :

                                W =mg

Here,

W is the weight or force acting on the body. m is the mass of the body, and g is the gravitational acceleration.

Since weight is also a force, so its SI unit is also newton. The value of weight varies from place to place depending on the gravity. Its value can also be equal to zero.

If you need to learn about the difference between mass and weight, click here

https://brainly.com/question/23876249?referrer=searchResults

#SPJ4

Answer:

1.2 m/s

Explanation:

You must divide the distance by time in order to find velocity! 50/45. He was going 1.2 m/s!

Answer: 34

Explanation: