How can speed and velocity be used to describe motion?

Answer: 0.24 atm

Explanation:

To calculate the new pressure, we use the equation given by Boyle's law. This law states that pressure is directly proportional to the volume of the gas at constant temperature.  

The equation given by this law is:

[tex]P_1V_1=P_2V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas = 1.0 atm

[tex]V_1[/tex] =  initial volume of gas = [tex]0.80 m^3[/tex]

[tex]P_2[/tex] = final pressure of gas= ?

[tex]V_2[/tex] = final volume of gas = [tex]3.32m^3[/tex]

Putting values in above equation, we get:

[tex]1.0\times 0.80m^3=P_2\times 3.32m^3[/tex]

[tex]P_2=0.24atm[/tex]

Thus the atmospheric pressure of the gas is 0.24 atm

Answer:

Im sorry i can't read it is to small

Answer:

90.44 m

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 30 m/s

Angle of projection (θ) = 40°

Acceleration due to gravity (g) = 9.8 m/s²

Range (R) =?

The range of the ball can be obtained as follow:

R = u² Sine 2θ / g

R = 30² Sine (2×40) / 9.8

R = 900 Sine 80 / 9.8

R = 900 × 0.9848 / 9.8

R = 886.32 / 9.8

R = 90.44 m

Therefore, the range of the tennis ball is 90.44 m

Answer:

Originally Answered: What is the unit of measurement of pressure in the atmosphere? The SI derived unit of pressure is the pascal , abbreviated Pa. This is a pressure exerted by a force of 1 newton acting over an area of 1m².

Explanation:

Hope this helps you a lot my boo!

Answer:

The answer for the first question is: 3,000,000 N/m

The answer for the second question is: If the question was, "Which of the following is the best example of kinetic energy being transformed into potential energy?" then the answer is winding the spring on a toy car

Explanation:

For the first question: I have no explanation, I just got it right on my test so I thought i'd help you out.

For the second question: (i'll try to explain the best I can).

Kinetic energy = energy in motion

Potential energy = stored energy

so when winding the spring of a car you are using energy in motion (kinetic energy) to create stored energy (potential energy) that will be used to move the car. So it goes something like:

kinetic energy > potential energy > kinetic energy

Answer:

The answer is A. Which is true

Answer:

1) A = lost volts, B = lower, C = a small pressure, D, = Newtons kg, E = Modulation.

2) A = True(?), B = true, C = True, D = True, E = not sure sorry.

Explanation:

Answer:

i think its b

Explanation:

its been awhile since I've worked on Newton's first law

Answer:

Yes the valency of oxygen is 2

Explanation:

since P=W/t

P=15204/40

P=380.1 Watt

Shockers acts as a shock absorber in the vehicle making the ride comfortable. When vehicle goes on rough road then it gets shocks from the road deformities the springs present in the shockers provide counter force and thus making the vehicle stable ride without shock.

[I copied this from the internet, but hope it helps!]

Answer:

Following are the solution to the given question:

Explanation:

Please find the complete question in the attached file.

[tex]a_x = 0\\\\a_y = -g = -9.81\ \ \frac{m}{s^2} \\\\v_{iy} = 0 \\\\y = v_{iy} \times t+ \frac{1}{2ay} \times t^2 \\\\ 15 = \frac{1}{2} \times 9.8 \times t^2 \\\\t = \sqrt{(2 \times \frac{15}{9.8})} \\\\[/tex]

  [tex]= 1.75 \ sec \\\\[/tex]

Distance:

[tex]x = v_{ix} \times t \\\\[/tex]

  [tex]= 8 \times 1.75\\\\= 14 m[/tex]

Using the concept of motion, the answers to the question posed on the motion of a dropped ball are :

The vertical component of acceleration is denoted as [tex]a_{y} [/tex] :

The gravitational force acting on the ball in the downward direction has an acceleration of - 9.8 m/s². Hence,

Gravitational force only acts downwards along the vertical, hence, horizontal component of acceleration will be Zero.

then the vertical component of x, will be 0

The initial vertical velocity ; [tex]V_{iy} is Zero [/tex] :

The time taken :

S = 0.5gt² ; S = distance = 15 meters ; g = - 9.81

15 = 0.5(9.8)t²

15 = 4.9t²

t² = (15 ÷ 4.9)

t² = 3.061

t = √3.061

t = 1.75 seconds

Landing Distance from building :

Horizontal speed × time taken

[tex]V_{ix} \times 1.75 [/tex]

[tex]8 \times 1.75 = 14 meters [/tex]

Therefore, the ball landed 14 meters away from the building.

Learn more : https://brainly.com/question/13981527

Answers:

The transportation industry is no stranger to the manipulation of everyday physics. Cars and trains utilize the wheel, which provides a smooth, steady motion.

The ears hear sounds which occur through the movement of air molecules, and the chemistry that drives all of biology depends on the physics of energy and molecules. Every day, for example, plants absorb sunlight, water, and carbon dioxide, creating glucose and releasing oxygen as a byproduct.

Brainlist pls!

Answer:

The work done by picking up 100 20-L bottles and raising it vertically 1 meter is 19614 joules.

Explanation:

By the Work-Energy Theorem, the work needed to raise vertically 100 bottles of water is equal to the gravitational potential energy, units for work and energy are in joules:

[tex]\Delta W = \Delta U_{g}[/tex] (1)

Where:

[tex]\Delta W[/tex] - Work.

[tex]\Delta U_{g}[/tex] - Gravitational potential energy.

The work is equal to the following formula:

[tex]\Delta W = n\cdot \rho \cdot V \cdot g \cdot \Delta h[/tex] (2)

Where:

[tex]n[/tex] - Number of bottles, dimensionless.

[tex]\rho[/tex] - Density of water, measured in kilograms per cubic meter.

[tex]V[/tex] - Volume, measured in cubic meters.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]\Delta h[/tex] - Vertical displacement, measured in meters.

If we know that [tex]n = 100[/tex], [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 0.02\,m^{3}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]\Delta h = 1\,m[/tex], then the work done is:

[tex]\Delta W = (100)\cdot \left(1000\,\frac{kg}{m^{3}} \right)\cdot (0.02\,m^{3})\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (1\,m)[/tex]

[tex]\Delta W = 19614\,J[/tex]

The work done by picking up 100 20-L bottles and raising it vertically 1 meter is 19614 joules.

Answer:

The ratio of lengths of the two mathematical pendulums is 9:4.

Explanation:

It is given that,

The ratio of periods of two pendulums is 1.5

Let the lengths be L₁ and L₂.

The time period of a simple pendulum is given by :

[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]

or

[tex]T^2=4\pi^2\dfrac{l}{g}\\\\l=\dfrac{T^2g}{4\pi^2}[/tex]

Where

l is length of the pendulum

[tex]l\propto T^2[/tex]

or

[tex]\dfrac{l_1}{l_2}=(\dfrac{T_1}{T_2})^2[/tex] ....(1)

ATQ,

[tex]\dfrac{T_1}{T_2}=1.5[/tex]

Put in equation (1)

[tex]\dfrac{l_1}{l_2}=(1.5)^2\\\\=\dfrac{9}{4}[/tex]

So, the ratio of lengths of the two mathematical pendulums is 9:4.

Answer:

here you have to find the range

Explanation:

[tex]range=\frac{u^{2}sin2\theta }{g}[/tex]

[tex]\frac{4.22^{2} * sin2(63) }{10}[/tex]

1.4431m

ice hokey, indoor soccer

Answer:

#1. decrease

#2. increases

#3. increases

#4.increases

Explanation:

Answer:

B= nimbus clouds

Answer:

B= nimbus clouds

Answer:

(i) Effort = 250 N

(ii) Velocity ratio = 6.667

(iii) work output = 20 000 Nm

Explanation:

Given: efficiency = 60%, mechanical advantage = 4.

(i) Mechanical advantage = [tex]\frac{Load}{effort}[/tex]

Load = 1000 N

⇒ Effort = [tex]\frac{Load}{Mechanical advantage}[/tex]

             = [tex]\frac{1000}{4}[/tex]

             = 250 N

Effort = 250 N

(ii) Efficiency = [tex]\frac{Mechanical advantage}{velocity ratio}[/tex] x 100%

Velocity ratio = [tex]\frac{Mechanical advantage}{Efficiency}[/tex] x 100%

                      = [tex]\frac{4}{60}[/tex] x 100

                      = 6.667

Velocity ratio = 6.667

(iii) Work output = Load x distance moved by load

                         = 1000 x 20

                         = 20 000

Work output = 20 000 Nm

Answer:

The answer is 20 miles

Explanation:

You would use a^2+b^2=c^2 to get the displacement.

So 16^2+12^2=c^2

400=c^2

c=20

Answer:

hope it helps......

Explanation:

Pressure, in the physical sciences, the perpendicular force per unit area, or the stress at a point within a confined fluid.

Answer:

B. o J

hope it helps......

Answer:

A. 4800J

Explanation:

use the formula of work u also can get answer

Answer:

the angle of reflection equals the angle of incidence—θr = θi. The angles are measured relative to the perpendicular to the surface at the point where the ray strikes the surface.

Explanation:

A microscope uses a mirror to reflect light to the specimen under the microscope. ... An astronomical reflecting telescope uses a large parabolic mirror to gather dim light from distant stars. A plane mirror is used to reflect the image to the eyepiece.

Answer:

LETTER A. AMPLITUDE

:)

Answer:

A

Explanation:

Answer:

The answer to this question is given below in the explanation section.

Explanation:

Give the relation of resistance of wire with the length and thickness:

Resistance:

There is a resistance to the flow of an electric current through most conductors.

The length of wire increases

The thickness of wire decreases

The resistance of a long wire is greater then the resistance of a short wire because electrons collide with more ions as they pass through.

The relationship between resistance and wire length is proportional. The resistance of thin wire is greater then the resistance of a thick wire because a thin wire has fewer electrons to  carry the current.The relationship between resistance and the area of the cross section of wire is inversely proportional.

Answer:

26

Explanation: