if the second floor and the top floor of a building are separated by a distance of 100 m, what is the approximate difference between the air pressures of the two levels? (note: air density

The outer gaseous giants are characterized by abundant gases like hydrogen, helium, methane, etc while the inner terrestrial planets are characterized by abundant solid elements like iron, nickel, silicon, etc.

Our solar system consists of the Sun and eight planets orbiting around it that are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.

Out of the eight, the four planets closest to the sun i.e Mercury, Venus, Earth, and Mars are terrestrial, which means that their surfaces are rock solid and are composed of elements like iron, nickel, aluminum, silicon, etc.

They also have no moons or a few moons.

On the other hand, the remaining four planets i.e Jupiter, Saturn, Uranus, and Neptune are composed mainly of gases like hydrogen, helium, and methane. They are devoid of solid surfaces.

Also, they all have a large number of moons orbiting them.

Therefore, the outer gaseous giants are characterized by abundant gases like hydrogen, helium, methane, etc while the inner terrestrial planets are characterized by abundant solid elements like iron, nickel, silicon, etc.

To know more about "Solar System", refer to the following link:

https://brainly.com/question/12075871?referrer=searchResults

#SPJ4

Answer:

Ask a question.

Explanation:

Your question is the basis of any theory.

Yes, electromagnetic can travel without medium.

Mechanical waves and electromagnetic waves are two important ways that energy is transported in the world around us.

Waves in water and sound waves in air are two examples of mechanical waves.

Mechanical waves are caused by a disturbance or vibration in matter, whether solid, gas, liquid, or plasma.

Matter that waves are traveling through is called a medium.

These mechanical waves travel through a medium by causing the molecules to bump into each other, like falling dominoes transferring energy from one to the next.

Sound waves cannot travel in the vacuum of space because there is no medium to transmit these mechanical waves.

On the other hand electromagnetic waves don't require medium for its propagation.

An easy example would be light which is an EM wave reaches earth even though space has no medium.

Learn more about different types of waves here:

https://brainly.com/question/13364787

#SPJ4

The wavelength of the final note is 0.389m

The distance between two successive crests or troughs of a wave is known as its wavelength. It is measured in the wave's direction. The distance a wave travels between its crests or troughs is known as its wavelength (which may be an electromagnetic wave, a sound wave, or any other wave). The wave's crest is its highest point, while its dip is its lowest. Because a wavelength represents a distance or length, it is expressed in length units like meters, centimeters, millimeters, nanometers, etc. Light's wavelength changes with color, or it differs for each hue. While violet has the shortest wavelength, red has the longest.

wavelength = v/f

wavelength = 343/800 m = 0.389m

To learn more about wavelength, Visit:

brainly.com/question/10750459

#SPJ4

The ball that is projected 125 meters straight upward has a total time in the air of: 10.1 s

The formulas for the vertical launch upward and the procedures we will use are:

Where:

Information about the problem:

Applying the maximum height formula and clearing the initial velocity we get:

y max = v₀²/(2*g)

v₀ = √(y max * (2*g))

v₀ = √( 125 m * (2 * 9.8 m/s²))

v₀ = √( 125 m * 19.6 m/s²)

v₀ = √2450 m²/s²

v₀ = 49.497 m/s

Applying the maximum time formula we get:

t max= v₀ / g

t max= 49.497 m/s / 9.8 m/s²

t max = 5.050 s

Applying  the time of flight formula, we get:

t(of) =2 * t max

t(of) =2 * 5.050 s

t(of) = 10.1 s

In physics vertical launch upwards is the motion described by an object that has been launched vertically upwards in which the height and the effect of the earth's gravitational force on the launched object are taken into account.

Learn more about vertical launch at: brainly.com/question/13962796

#SPJ4

The time spent in the air by the ball is 10.01 seconds.

The total time spent in the air by the ball is the sum of the time it spends moving up and the time it spends falling down.

The time spent by the ball moving up - time spent by the ball travelling down.

Time spent by the ball traveling down a distance of 125 meters is calculated using the formula given as follows:

t = √2h/g

Total time spent = 2 * √2h/g

where:

h = 125 m

g = 9.81 m/s²

T = 2 * √(2 * 125/9.81)

T = 10.01 s

Therefore, the time spent in the air by the ball is the sum of the time spent moving up and the time it spends falling down which are both equal.

Learn more about time of fall at: https://brainly.com/question/2094877

#SPJ1

K-wires or pins are smooth, sharpened, and sterilized pins made of stainless steel. The wires are now frequently utilized in orthopedic surgery as well as other forms of human and animal surgery.

Sometimes it's necessary to mend a fracture with Kirschner wires (K-wires), which are firm, straight wires (broken bone). K-wires are frequently referred to as "pins." K-wires may be required if your child has a fracture that requires surgery in order to keep the bones in place while they mend.

Surgery is used in open reduction and internal fixation (ORIF) to put shattered bone fragments back together. The shattered bone is held together with screws, plates, sutures, or rods. When a shattered bone is in multiple parts, an ORIF is frequently performed as an emergency operation. The goal is to facilitate joint bone healing.

To learn more about K-wire and screw fixation, Visit:

https://brainly.com/question/22527662

#SPJ4

The magnitude of the magnetic field in the region through the current passes is 8×10⁻³  T.

The magnetic field is defined as the field the magnetic materials generate or when an electric charge moves in a field region that generates the magnetic field.

As we know:

F = ilB

F is the magnetic force

i is the current

l is the length

B is the magnitude of the magnetic field

Here F/l = 0.120 N/m

i = 15 A

B = (F/l)(1\i)

B = (0.120)(1/15)

B = 0.120/15

B = 8×10⁻³  T

Thus, the magnitude of the magnetic field in the region through the current passes is 8×10⁻³  T.

Learn more about the magnetic field here:

brainly.com/question/14848188

#SPJ6

a holistic overview of underground hydrogen storage is all three.

Physically, hydrogen can be kept as either a gas or a liquid. Usually, high-pressure tanks are needed for gas storage (5000–10,000 psi tank pressure). Since hydrogen's boiling point at one atmosphere of pressure is -252.8°C, storage of hydrogen as a liquid necessitates cryogenic temperatures.

There are different ways and ways of storing hydrogen: 1) high-pressure gas cylinders (up to 800 bar), 2) cryogenic tanks with liquid hydrogen at 21 K, 3) hydrogen adsorbed on materials with a large specific surface area (at T100 K), and 4) absorbed on interstitial sites in a host metal (at ambient pressure).

In applications such as fixed power, portable power, and transportation, hydrogen storage is a crucial enabling technology for the development of hydrogen and fuel cell technologies.

To know more about pressure visit :

https://brainly.com/question/12971272

#SPJ4

The Energy flux from Star B is 16 times of the energy flux from Star A.

We have Two stars - A and B with 4900 k and 9900 k surface temperatures.

We have to determine how many times larger is the energy flux from Star B compared to the energy flux from Star A.

Stephens law states that if E is the energy radiated away from the star in the form of electromagnetic radiation, T is the surface temperature of the star, and σ is a constant known as the Stephan-Boltzmann constant then-

[tex]$\frac{Energy}{Area} = \sigma\times T^{4}[/tex]

Now -

Energy emitted per unit surface area of Star is called Energy flux. Let us denote it by E. Then -

[tex]$E= \sigma\times T^{4}[/tex]

Now -

For Star A →

[tex]T_{A}[/tex] = 4900 K

For Star B →

[tex]T_{B}[/tex] = 9900 K

Therefore -

[tex]$\frac{T_{B} }{T_{A} } =\frac{9900}{4900}[/tex]

[tex]\frac{T_{B} }{T_{A} }=[/tex] 2.02 = 2 (Approx.)

Now -

Assume that the energy flux of Star A is E(A) and that of Star B is E(B). Then -

[tex]$\frac{E(B)}{E(A)} = \frac{\sigma\times T(B)^{4} }{\sigma \times T(A)^{2} }[/tex]

E(B) = E(A) x [tex](\frac{T(B)}{T(A)} )^{4}[/tex]

E(B) = E(A) x [tex]2^{4}[/tex]

E(B) = 16 E(A)

Hence, the Energy flux from Star B is 16 times of the energy flux from Star A.

To learn more about Stars, visit the link below-

https://brainly.com/question/13451162

#SPJ4

The sound intensity of a jet engine radiating an acoustic power of 2.11×105 w sound at a distance of 50.3 m from the engine is approximately 6.64 [tex]W/m^2[/tex].

The intensity means the amount of loudness in it. The actual definition of intensity is the amount of power a sound has per unit area.

Mathematically, the intensity can be written as:

[tex]I=\frac{Power}{Area}[/tex]

The given data:

Power, P = [tex]2.11\times 10^5 W[/tex]

Area, A = [tex]4\pi d^2=4\pi (50.3)^2 m^2[/tex]

So using the formula, we have:

[tex]I=\frac{2.11\times 10^5}{4\pi (50.3)^2} \approx 6.64 W/m^2[/tex]

Hence, the intensity of a jet engine is approximately 6.64 [tex]W/m^2[/tex].

To learn more about Attention here:

https://brainly.com/question/14931172

#SPJ4

Answer: All that seems to be needed to be done, is for you to subtract 57m from 70m and that equals: 13m displacement! hope this is helpful! good luck!

Electron, photon and proton carry momentum .

Equation (1) can be written as   [tex]\lambda=\frac{h}{p}[/tex]   where λ  is known as de Broglie wavelength and p is momentum , h = Plank’s constant

For photon , the momentum is given by   [tex]p=\frac{E}{c}[/tex]   ...(2)  where c is the speed is the speed of light .

From equation (1) and (2) we can conclude that electron, photon and proton carry momentum .

Learn about more photon momentum here :

https://brainly.com/question/13112527

#SPJ4

The magnitude of the electric field for 40 cm is 1.46 × 10^6 N/C

We choose a Gaussian sphere of radius r = R. Apply Gauss’s law from  Equation (1):

[tex]\Phi_{\text{E}}=\oint \overrightarrow{\mathbf{E}}\cdot d\overrightarrow{\mathbf{A}}=\dfrac{q_{\text{in}}}{\epsilon_0}[/tex]

[tex]\oint EdA=\dfrac{q_{\text{in}}}{\epsilon_0}[/tex]

[tex]E\oint dA=\dfrac{q_{\text{in}}}{\epsilon_0}[/tex]

[tex]EA=\dfrac{q_{\text{in}}}{\epsilon_0}[/tex]

Where A is the area of the solid sphere found from Equation (2) and [tex]q_{\text{in}}[/tex] is the charge enclosed by the Gaussian surface  which is the total charge of the sphere found from Equation (3):

[tex]E(4\pi r^2)=\dfrac{\rho V}{\epsilon_0}[/tex]

[tex]E(4\pi r^2)=\dfrac{(Q/\bcancel{V})\bcancel{V}}{\epsilon_0}[/tex]

Solve for E:

[tex]E=\dfrac{Q}{4\pi\epsilon_0 r^2}\tag{6}[/tex]

Substitute numerical values:

[tex]E&=\dfrac{26\times 10^{-6}}{4\pi (8.8542\times 10^{-12})(0.4)^2}\\ &={1.46\times 10^{6}\;\mathrm{N/C}\;\text{directed radially outward}}}[/tex]

Learn more about sphere here:

https://brainly.com/question/12390313

#SPJ4

0.03185A current is required in the windings for that to occur.

It is given that 1000 turns uniformly distributed over a length of 0.400 m produces a magnetic field of magnitude 1.00 ×10⁻⁴T .

Putting above values in equation (1) , we get

[tex]1.00\times10^{-4}=\frac{4\pi \times10^{-7}\times1000I}{0.400} \\\\I=\frac{1.00\times10^{-4} \times0.400}{4\pi \times1000} \\\\I=0.03185A[/tex]

Learn about solenoid more here :

https://brainly.com/question/15218721

#SPJ4

2.5 10 9 J of the 1.034 10 10 J total energy is kinetic energy, and 7.84 10 9 J is potential energy.

The average kinetic energy of the particles in an item is measured by its temperature. These particles move more quickly as the temperature rises. It is not the worst definition, but it is also not the finest.

The average kinetic energy (K) is determined by multiplying the RMS speed (vrms) by the square of the mass (m) of each gas molecule.

Thus, it may be inferred that the temperature is the single factor affecting the average kinetic energy of the molecules in a thermalized sample of gas.

A substance's temperature is directly related to the average kinetic energy of its particles. Because the particles' mass remains constant, they must travel faster as the planet warms.

Learn more about  average kinetic energy refer

https://brainly.com/question/9078768

#SPJ4

If the thermal coefficient of resistivity for nichrome is 4.5 x 10-4 1/co, the   temperature of the coil of the coil is 0.56 a.

Resistivity is a central property of a material, and it shows how unequivocally the material opposes or transmits electric flow. A low resistivity is an obvious sign of a material which promptly permits electric flow. The resistivity increments implies that the conductivity of the material abatements. For metals or transmitters, it is said that they have a positive temperature co effective. The worth α is positive. Electrical resistivity is a property interesting to each material, which is fundamental to comprehend prior to making and planning electrical and electronic frameworks.

Learn more about resistivity, refer:

https://brainly.com/question/24117375

#SPJ4

Answer:

It's all in the Explanation.

Explanation:

You round the number of the IP address and boom. You have your answer.

The phrase which best describes the structure of an atom from the answer choices given above is a nucleus surrounded by an electron cloud.

The correct answer choice is option b

This means that an atom consist of a centrally placed nucleus in which electrons revolves around it. The nucleus of any given atom consist of protons and neutrons. Electrons revolve round the nucleus of any atoi

An atom is a smallest particle of an element that takes part in chemical reaction.

Atom is divided into three basic parts:

So therefore, the phrase which best describes the structure of an atom from the answer choices given above is a nucleus surrounded by an electron cloud.

The correct answer choice is option b

Learn more about an atom:

https://brainly.com/question/17545314

#SPJ1

Due to a single charge and the additional distance =2r, the electric field is E r times the distance of point y from the charge

New intensity is consequently equal to E/4.

From the point charge, the electric field extends in all directions. Spherical equipotential surfaces are represented by the circles. The vector sum of the individual fields may be used to compute the electric field from any number of point charges.

Volts per metre (V/m) is the electrical field's SI unit. The Newtons per coulomb are the same as this unit. These units have their roots in Newton, which stands for force, and Coulomb, which stands for charge.

Being a vector quantity, the electric. We understand that the electric field is defined by the force to test charge ratio.

learn more about electric field refer

https://brainly.com/question/24317284

#SPJ4

H= 2gu 2sin 2 is the expression for the total range of a projectile launched at an angle that reaches ground that is the same height at the launch position.

Let's imagine that a projectile is moving at a velocity of u at an angle of to the horizontal. After time t, the velocity will be v=v x i+v y j+v=ucos i+(usingt) j (because v y = usingt).

The projectile's only horizontal component at maximum height is vx =ucosv y 2u y2 =2ayv y =0(atm ax heightH)u y =usin ay=gH.

To put these values into context,

0=(usin) 2 2gH

H= 2gu 2sin 2

Projectile angular momentum is equal to mu cos h, where h stands for height. In the case of angular projection, the angle between the velocity and acceleration ranges from 0 to 180 degrees.

Learn more about Projectile here-

https://brainly.com/question/11422992

#SPJ4

​

​

​

​

283 Hz is the frequency closest to 300 Hz to which the oscillator may be adjusted such that the observer hears a minimal sound.

Δr = 1/2λ

   = v/2f        

f = v / 2Δr

  = 343 / 2(√13 - 3.00)

   = 283 Hz.

Frequency is a vital parameter used in technological know-how and engineering to specify the temporal fee of exchange located in oscillatory and periodic phenomena, including mechanical vibrations, audio signals (sound), radio waves, and light.

The wide variety of intervals or cycles consistent with 2d is referred to as frequency. The SI unit for frequency is the hertz (Hz). One hertz is the same as one cycle in keeping with 2nd.

Learn more about frequency here: https://brainly.com/question/254161

#SPJ4

Based in the frame rate and the distance travelled by the ball, the speed of the ball is 398.6 cm/s.

The speed of an object or a moving body is the ratio of the distance covered by the moving body or object and the time taken to cover that distance.

Mathematically:

The speed of the ball in the diagram is determined as follows:

Total distance covered by the ball will the product of the distance between the points and the number of point covered by the ball after the original point.

Distance between points = 19 cm

number of points = 6

Total distance covered by the ball = 6 *19 cm

Total distance covered by the ball = 114 cm

Time taken = 1/frame rate * number of points

Time taken = 1/22 * 6

Time taken = 0.286 s

Speed = 114 cm/0.286 s

Speed = 398.6 cm/s

Learn more about speed at: https://brainly.com/question/13943409

#SPJ1

The ion rocket engine give an acceleration to the space probe of: 0.001 m/s²

To solve this exercise, the formula and procedure to be applied is:

F = m * a

Where:

Information about the problem:

Applying the force formula and isolating the acceleration, we get:

F = m * a

a = F/m

a = 1 N /1000kg

a =  1 kg * m/s² / 1000kg

a = 0.001 m/s²

It is the physical magnitude that expresses the effort necessary to move the mass of one kilogram with an acceleration of one meter per second squared, this is expressed in units of the international system in Newton.

Learn more about force at: brainly.com/question/12970081

#SPJ4

If k = 0.34, the temperature of the liquid after 7 hours will be T(t) = 84.7°F.

We can solve the above problem using Newton's Law of Cooling.

According to this Law, the rate at which a hot body loses heat is directly proportional to the difference between the temperature of the hot body and that of its surroundings.

T(t) = [tex]T_{s}[/tex] + ([tex]T_{0}[/tex] - [tex]T_{s}[/tex])[tex]e^{-kt}[/tex]

where,

t= time

T(t) = temperature of the given body at time t

[tex]T_{s}[/tex] = surrounding temperature

[tex]T_{o}[/tex] = initial temperature of the body

k = constant

Substituting the values we get,

T(t) = 76 + (170-76)[tex]e^{(-0.34)(7)}[/tex]

T(t) = 84.7°F

To know more about problems based on Newton's Law of cooling kindly refer to the below link:

https://brainly.com/question/13748261

#SPJ4

pavement is defined as the surface of Road or sidewalk.

for example, the surface of Expressway.

There are two types of pavement.

rigid pavement which consists of one layer.

flexible pavement which consist of multiple layers.

While driving on roads of rural areas, if our right wheel moves off the pavement, we should always hold the steering wheel firmly and then take our foot off the pedal, then apply brake lightly until we are moving at a low speed.

if you run off the pavement, you should: turn the steering wheel quickly toward the road steer straight and slow down before attempting to return to the pavement steer straight ahead and speed up apply the brakes hard

To know more about pavement:

https://brainly.com/question/28456065

#SPJ4

A physical field called an electric field surrounds electrically charged particles and attracts or repels all other charged particles nearby. The physical field of a system of charged particles can also be referred to as the electric field.

In a uniform electric field E, a particle with electric charge q moves in a straight line. The speed of the particle is u.

The electric force exerted in the charge is qE.

The electric field and the velocity of the particle are both in the x direction.

Now, the momentum of the particle at any speed is given as:

p = γ mu = mu / √[ 1 - (u/c)²]

By Newton's law,

F =qE

F = dp/dt
qE = (d/dt) [ mu [ 1 - (u/c)²]^(-1/2)

qE =  m [ 1 - (u²/c²)]^{-1/2} du/dt + (1/2) mu[1 - (u²/c²)]⁻³/² (2u/c²) du/dt

Therefore,

qE/m = (du/dt) [( 1 - (u²/c²) + (u²/c²) ) / ( 1 - (u²/c²)⁻³/²

Now,

a = (du/dt) = (qE/m) (( 1 - (u²/c²) )⁻³/²

Learn more about the electric field here:

https://brainly.com/question/14372859

#SPJ4

The role described here is that of a project manager.

A project manager is one who is saddled with the responsibility of seeing to the actualization of a project. The project manager is the one that plans, manages and executes the project.

Looking at the description of Jaronda’s role, we can see that she is in charge of the planning, execution and implementation of the project. This means that she has taken up the role of the project manager.

Learn more about project manager:https://brainly.com/question/17313957

#SPJ1

The primary distinction between a system's ground state and excited state is that a system's ground state is any state in which its electrons are at their lowest potential energy levels, whereas an excited state is any state in which they are at an energy higher than the system's ground state.

Any quantum state of a system that has higher energy than the ground state is considered to be in an excited state in quantum mechanics. An increase in energy level over a predetermined starting point, typically the ground state, but occasionally an already excited state, is referred to as excitation.

A ground-state atom is one in which moving one or more electrons to different orbitals will not reduce the overall energy of the electrons in the atom. In other words, all of the electrons in a ground-state atom are at their lowest conceivable energy levels.

To learn more about the states of electrons, Visit:

https://brainly.com/question/14368851

#SPJ4

The speed of electron exceeds that of the proton by 0.917c given that the rest energy of an electron is 0.511MeV and the rest energy of a proton is 938MeV, with both particles having kinetic energies of 2.00MeV.

From,

v=√1-1/γ^2 ×c     (1)

 Where γ=4.91 for electrons and γ=1.002 for protons

The speed of proton is 0.063c and the speed of the electron is 0.98c

∆V  is the change in velocity or speed

V_e  is the velocity of the electron

V_p  is the velocity of the proton

Change in velocity between the electron and proton ∆V=V_e-V_p

∆V=0.98c-0.063c

∆V=0.917c

Therefore, the change in velocity between electron and proton is 0.917c #SPJ4

https://brainly.com/question/13088059

SPJ4

It will point to the left and oppose the initially applied field the correct option is B.

The term "electric field" refers to the physical field that surrounds electrically charged particles and pulls or attracts all other charged particles nearby. Additionally, it describes the physical environment of a system of charged particles.

Let the electric field point to the right and the charge be positive. A positive charge will build to the right and the overly positive charge will be present there when the charge moves to the right in the field. In opposition to the external electric field, this new charge distribution will produce a field to the left.

To know more about an electric field follow

https://brainly.com/question/14372859

#SPJ4