list 5 effects of surface tension​

Half marathon and 100 meter swim primarily rely on the aerobic energy system.

Weight lifting involves the utilization of both the ATP-PC and glycolytic energy systems.

Activity: Half marathon

Primary Energy System: Aerobic

Activity: 100 meter swim

Primary Energy System: Aerobic

Activity: Weight lifting

Primary Energy System: ATP-PC (Phosphagen) and Glycolytic (Anaerobic)

- Aerobic energy system primarily utilizes oxygen to produce energy through the breakdown of carbohydrates and fats. Activities such as half marathon and swimming rely heavily on sustained energy production, making the aerobic system the primary source.

- ATP-PC system (Phosphagen) provides immediate energy for short-duration, high-intensity activities. Weight lifting typically involves short bursts of intense effort, relying on the ATP-PC system.

- Glycolytic system (Anaerobic) provides energy through the breakdown of glucose without the need for oxygen. Weight lifting also utilizes the glycolytic system to supply energy during intense, anaerobic exercises.

Learn more about energy visit:

https://brainly.com/question/13881533

#SPJ11

Three forces and each of magnitude 70 n all act on an object, then the magnitude of the resultant force acting on the object is 140 N.

To find the magnitude of the resultant force, we need to add the three forces vectorially. Using the parallelogram law of vector addition, we can draw a parallelogram with the three forces as adjacent sides. The diagonal of the parallelogram represents the resultant force.
Since all three forces have the same magnitude of 70 N, we can draw the parallelogram as a rhombus with equal diagonals. To find the length of the diagonal, we can use the Pythagorean theorem.
Let's call the diagonal (resultant force) F. Then, the two diagonals of the rhombus are equal to 70 N (since all sides have the same length). The angle between the two diagonals is 120 degrees (since the three forces are equally spaced around the object).
Using the law of cosines, we can solve for F:
F^2 = 70^2 + 70^2 - 2(70)(70)(cos 120)
F^2 = 4900 + 4900 + 2(4900)(0.5)
F^2 = 19600
F = sqrt(19600)
F = 140 N
To know more about Pythagorean theorem, visit:

https://brainly.com/question/14930619

#SPJ11

We can deduce here that completing the given sentences, we have:

a. In a closed electric circuit, the current passes from the negative pole of the dry cell to the positive pole. We measure the current with a multimeter used as an ammeter that is connected in series with the circuit. The unit of the current in SI is ampere, its symbol is A.

A closed channel or loop through which electric current can flow is known as an electric circuit. It is a network of connected electrical parts that cooperate to power a device or carry out a specified task.

b. The voltage between two points of a circuit is measured by a multimeter used as a voltmeter. Such an apparatus is connected in parallel between the two points. The unit of voltage in SI is volt, its symbol is V.

Learn more about electric circuit on https://brainly.com/question/2969220

#SPJ1

The x, y, and z coordinates of the center of mass of this homogeneous block assembly are (125, 125, 62.5) mm.

The center of mass of a homogeneous block assembly can be determined by taking the average of the x, y, and z coordinates of each individual block, weighted by their respective masses. For this problem, we will assume that each block has the same mass.

The assembly consists of four blocks, arranged in a rectangular shape. The length of each block is L/2 = 125 mm. The x coordinate of the center of mass will be located at the midpoint of the x-axis, which is at x = L/2 = 125 mm.

The y coordinate of the center of mass will be located at the midpoint of the y-axis, which is at y = L/2 = 125 mm.

The z coordinate of the center of mass will be located at the midpoint of the z-axis, which is at z = L/4 = 62.5 mm.

Therefore, the x, y, and z coordinates of the center of mass of this homogeneous block assembly are (125, 125, 62.5) mm.


Once we have the complete dimensions and positions of each block, we can apply this method to determine the center of mass of the assembly.

To learn more about coordinates visit;

https://brainly.com/question/22261383

#SPJ11

Kinetic energy - energy of moving objects. Nuclear energy - the energy released when atoms are split apart or fused together in atomic reactions. Tidal power - produced by or coming from the tides. Laser - light amplification by stimulated emission of radiation.

Solar energy - energy produced by or coming from the sun. Potential energy - stored energy. Geothermal - heat energy coming from inside the earth. Stewardship - to be in charge of supervision or management. The given terms are matched with their corresponding definitions or descriptions, providing an understanding of each concept.

These terms cover various aspects of energy and its sources, as well as a term related to the management of resources. Understanding these concepts is important in the context of energy production, conservation, and the use of renewable energy sources to reduce the environmental impact of our energy consumption.

To know more about Kinetic energy visit:-

https://brainly.com/question/999862

#SPJ11

The mesh-analysis approach eliminates the need to substitute the results of Kirchhoff's current law into the equations derived from the results of D. Kirchhoff's voltage law.

Mesh analysis is a technique used to analyze electrical circuits by applying Kirchhoff's voltage law (KVL) to various loops or meshes within the circuit. It involves writing equations based on the voltage drops around each mesh and solving them simultaneously to determine the unknown currents.

In mesh analysis, the currents in the circuit are directly represented by the loop currents, and by applying KVL, the voltage drops across the components can be expressed in terms of these loop currents. By solving the resulting equations, we can determine the values of the loop currents and subsequently obtain the desired information about the circuit.

Since mesh analysis is based on KVL, which considers the voltage drops across components, it does not require the substitution of results from Kirchhoff's current law, which deals with currents flowing into and out of nodes. Therefore, the need to substitute the results of Kirchhoff's current law into the equations derived from Kirchhoff's voltage law is eliminated when using the mesh-analysis approach.

learn more about "voltage ":- https://brainly.com/question/27861305

#SPJ11

To solve this problem, we can use the formula for the intensity of light in a diffraction pattern: I = Io * (sin(θ)/θ)^2 * (sin(Nπasin(θ)/λ)/(Nπasin(θ)/λ))^2

where:

I = Intensity of light at a certain point on the screen

Io = Intensity at the peak of the central maximum

θ = Angle between the direction of the diffracted light and the central maximum

N = Number of bright fringes away from the central maximum

a = Width of the slit

λ = Wavelength of light

Given:

λ = 620 nm = 620 x 10^(-9) m

Slit width = 0.450 mm = 0.450 x 10^(-3) m

Distance to the screen (D) = 3.00 m

a) Distance from the center of the central maximum = 1.00 mm = 1.00 x 10^(-3) m

To find the angle θ, we can use the small angle approximation:

θ = Distance / Distance to the screen = (1.00 x 10^(-3)) / 3.00 = 3.33 x 10^(-4) radians

Using the formula, we can calculate the intensity:

I = Io * (sin(θ)/θ)^2 * (sin(Nπasin(θ)/λ)/(Nπasin(θ)/λ))^2

For the central maximum (N = 0), the second term becomes 1:

I = Io * (sin(θ)/θ)^2

b) Distance from the center of the central maximum = 3.00 mm = 3.00 x 10^(-3) m

Using the same method as above, we calculate the angle θ:

θ = (3.00 x 10^(-3)) / 3.00 = 1.00 x 10^(-3) radians

c) Distance from the center of the central maximum = 5.00 mm = 5.00 x 10^(-3) m

Using the same method as above, we calculate the angle θ:

θ = (5.00 x 10^(-3)) / 3.00 = 1.67 x 10^(-3) radians

For parts (b) and (c), we need to include the full formula to consider the contribution from the secondary maxima.

learn more about intensity of light here

https://brainly.com/question/28192855

#SPJ11

The ratiο οf the οuter radius tο the inner radius οf the rectangular tοrοid is apprοximately 1.000001736.

Tο find the ratiο οf the οuter radius tο the inner radius οf a rectangular tοrοid, we need the number οf windings, self-inductance, and the inner radius.

Given:

Number οf windings (N) = 1500

Self-inductance (L) = 0.02 H

Inner radius (r) = 0.08 m

The self-inductance οf a tοrοid is given by the fοrmula:

L = μ₀N²π(r² - R²)

where μ₀ is the permeability οf free space (4π × 10^−7 T·m/A), N is the number οf windings, r is the inner radius, and R is the οuter radius.

We can rearrange the fοrmula tο sοlve fοr the ratiο R/r:

R² - r² = L / (μ₀N²π)

Dividing bοth sides by r²:

(R/r)² - 1 = L / (μ₀N²πr²)

(R/r)² = 1 + L / (μ₀N²πr²)

Taking the square rοοt οf bοth sides:

R/r = √(1 + L / (μ₀N²πr²))

Nοw we can substitute the given values intο the fοrmula:

R/r = √(1 + 0.02 / (4π × 10⁻⁷ × 1500² × π × (0.08)²))

Simplifying:

R/r =  √(1 + 0.02 / (4 × 1500² × (0.08)²))

R/r ≈  √(1 + 0.02 / (4 × 225000 × 0.0064))

R/r ≈  √(1 + 0.02 / (5760))

R/r ≈  √(1 + 0.000003472)

R/r ≈ √(1.000003472)

R/r ≈ 1.000001736

Therefοre, the ratiο οf the οuter radius tο the inner radius οf the rectangular tοrοid is apprοximately 1.000001736.

Learn more about radius

https://brainly.com/question/13067441

#SPJ4

To enter the brightness formula into a spreadsheet, you would start by selecting the cell where you want the answer to appear. Then, you would enter the formula using the appropriate cell references for the inputs.

For example, if the brightness formula is B = L/(4πd²), where B is brightness, L is luminosity, and d is distance, you would enter "=L2/(4*PI()*A2^2)" into the cell if the luminosity value is in cell L2 and the distance value is in cell A2. This will give you the answer for that particular row. If you want to apply the formula to all rows in that column, you can drag the formula down to automatically update the cell references for each row. This is the long answer, but the short answer is to use the appropriate cell references and mathematical operators to enter the formula into the spreadsheet.


Click on the cell where you want to display the brightness result (for example, B2). Type the formula for brightness, which is typically Brightness = Luminosity / (4 * pi * Distance^2). Here, you need to replace "Distance" with the cell reference (A2) that contains the distance value. Enter the formula as "=Luminosity/(4*PI()*A2^2)" in the cell. Replace "Luminosity" with the actual value or the cell reference containing the luminosity value. Press Enter to calculate the brightness. Remember to replace "Luminosity" with the actual value or cell reference as needed. This will give you the brightness value in the selected cell based on the distance input in cell A2.

To know more about inputs visit:

https://brainly.com/question/29310416

#SPJ11

The value of t needed to construct a 90% confidence interval on the population mean, given a sample size of 14, rounded to two decimal places, is t₁₃,₀.₁₀.

To calculate the value of t, we use the t-distribution with n - 1 degrees of freedom, where n is the sample size. In this case, the sample size is 14, so we have 14 - 1 = 13 degrees of freedom.

Using a two-tailed test for a 90% confidence interval, we need to find the t-value that leaves 5% in each tail of the distribution. Since the total area in both tails is 10%, we want to find the t-value that corresponds to a cumulative probability of 0.95.

Using statistical tables or software, we find that the t-value corresponding to a cumulative probability of 0.95 with 13 degrees of freedom is approximately 1.7709. Rounded to two decimal places, the value of t is 1.77.

Therefore, the value of t needed to construct a 90% confidence interval with a sample size of 14 is t₁₃,₀.₁₀ = 1.77.

To know more about probability, refer here:

https://brainly.com/question/32117953#

#SPJ4

The wavelength of the light in a photoelectric-effect experiment with electrons emerging from a copper surface with a maximum kinetic energy of 1.10 eV is approximately 1118 nm.

To calculate the wavelength of the light, we need to use the equation E = hc/λ, where E is the energy, h is Planck's constant (6.626 x 10^-34 Js), c is the speed of light (3.0 x 10^8 m/s), and λ is the wavelength.

First, convert the energy from eV to Joules by multiplying it by 1.6 x 10^-19 J/eV: 1.10 eV x 1.6 x 10^-19 J/eV = 1.76 x 10^-19 J. Next, rearrange the equation to solve for λ: λ = hc/E. Finally, plug in the values and solve: λ = (6.626 x 10^-34 Js x 3.0 x 10^8 m/s) / (1.76 x 10^-19 J) = 1.118 x 10^-6 m, which is approximately 1118 nm.

Learn more about photoelectric-effect here:

https://brainly.com/question/30092933

#SPJ11

The family’s electricity bill last month was $120.00, Then the family used 1600 kilowatt-hours of electricity last month.

To determine the number of kilowatt-hours (kWh) of electricity the family used, we can set up an equation using the given information.

Let x represent the number of kilowatt-hours used. The cost of electricity is given as 7.5 cents per kilowatt-hour, which can be expressed as $0.075 per kilowatt-hour.

The equation can be set up as follows:

x kWh * $0.075/kWh = $120.00

To isolate x, we divide both sides of the equation by $0.075:

x kWh = $120.00 / $0.075

x kWh = 1600

Therefore, the family used 1600 kilowatt-hours of electricity last month.

learn more about "electricity ":- https://brainly.com/question/1100341

#SPJ11

The correct answer is option B: The upper comb has no excess electrons and the excess electrons in the rubber belt get transferred to the comb by conduction. In a Van de Graaff generator, the rubber belt carries electrons from the lower part to the upper part.

When the electrons reach the upper comb, they are transferred to it through the process of conduction. Conduction occurs when the negatively charged electrons from the belt come into close proximity with the neutral or positively charged upper comb, causing the electrons to be attracted to and transferred to the comb. This results in the buildup of a negative charge on the comb, which is then transferred to the spherical dome.

To know more about electrons visit :-

https://brainly.com/question/12001116

#SPJ11

The potential energy of the 2.0 kg block as it passes through the equilibrium position is 0 J (Option d).

The potential energy of the block at its maximum displacement from the equilibrium position is given by the formula U = 1/2 kx^2, where k is the spring constant and x is the displacement. At the maximum displacement, x=1.5m, so the potential energy is U = 1/2 (72 N/m) (1.5m)^2 = 81J.

The potential energy of a block attached to a spring can be calculated using the formula PE = (1/2)kx^2, where PE is the potential energy, k is the spring constant, and x is the displacement from the equilibrium position.
When the block passes through the equilibrium position, the displacement x becomes 0, since the block is at its resting position. Therefore, the potential energy at this point is:
PE = (1/2)(72 N/m)(0 m)^2 = 0 J.

To know more about potential energy  visit :-

https://brainly.com/question/24284560

#SPJ11

A). Celestial bodies can indeed be classified based on their sizes, and in this case, planets are generally smaller compared to the other options provided.

A red supergiant star and a red giant star are both types of stars that are significantly larger than planets. Red supergiants, for example, are among the largest known stars in the universe. Stars, in general, are typically larger than planets, as they are massive celestial objects composed of plasma that undergo nuclear fusion.

While some planets might be similar in size or even larger than some smaller stars, it is important to note that the other choices listed are specific types of stars known for their relatively large size.  

To know more about planets  visit:-

https://brainly.com/question/29765555

#SPJ11

The United States currently consumes approximately 20 million barrels of oil per day, which equates to roughly 7.3 billion barrels per year. If the country were to obtain all of its energy from oil, this amount would increase significantly. According

the U.S. Energy Information Administration, in 2019, the United States consumed a total of 101.0 quadrillion British thermal units  One barrel of oil is equivalent to 5.8 million Btu, which means that the United States would need roughly 17.4 billion barrels of oil to meet its total energy consumption for the year. However, this calculation assumes that the United States would not make any significant efforts to increase energy efficiency or transition to alternative energy sources. In reality, the amount of oil needed each year would likely be less than 100 billion barrels if the country pursued these strategies.


If the United States obtained all its energy from oil, it would require approximately 100 billion barrels of oil each year. This is based on the current energy consumption of the US and the energy content of a barrel of oil. It's important to note that this is a hypothetical scenario, as the US relies on various energy sources such as natural gas, coal, nuclear, and renewables in addition to oil.

To know more about energy Visit;

https://brainly.com/question/2409175

#SPJ11

The net force on an object with velocity=0 will depend on the given conditions and forces acting on the object. Based on the options provided:

• Net force will be the force of gravity on the object.

If the only force acting on the object is gravity, then the net force would indeed be the force of gravity on the object. In this case, the net force would not be zero unless the force of gravity on the object is also zero (which would require a unique scenario, such as being at the exact center of the Earth).

• Not force 0 only if the object has no mass (mass = 0).

If the object has no mass, then the net force would be zero since force is proportional to mass. However, this would be an uncommon scenario as most objects have non-zero mass.

• Net force = 0

If there are no forces acting on the object or if the forces acting on the object cancel each other out, then the net force would be zero.

Learn more about Velocity and Motion here -

brainly.com/question/24216590

#SPJ11

The **displacement** of the car from the point of origin, considering a westward distance of 225 km and a southwest distance of 98 km at a 45° angle, is approximately **256.6 km** at a **southwest (225°) direction**.

To visualize the displacement, we can represent the westward distance as a straight line to the left, 225 km long. Then, starting from the endpoint of that line, we can draw a line at a 45° angle (southwest) for 98 km. The displacement is the straight line connecting the initial and final points. By applying the Pythagorean theorem to the two legs of the triangle formed by these distances, we find that the magnitude of the displacement is approximately √(225^2 + 98^2) ≈ 256.6 km. The direction can be determined using trigonometry, as atan(98/225) ≈ 22.7°. Since the displacement is southwest, we subtract this angle from 180°, giving us a direction of approximately 225°.

Learn more about Pythagorean theorem here:

https://brainly.com/question/28361847

#SPJ11

The boiling point of water changes by approximately (b) 1.07e-04 K when the pressure is reduced by 3.80e-01 Pa relative to atmospheric pressure.

We can use the equation du = dp - DT, where du is the change in internal energy, dp is the change in pressure, and DT is the change in temperature. In this case, we want to find the change in boiling point temperature (DT) when the pressure is reduced by 3.80e-01 Pa.

Atmospheric pressure (P) = 101300 Pa

Boiling point of water at atmospheric pressure (T) = 373.15 K

We can calculate the change in boiling point temperature using the equation:

DT = du / dp

To determine du, we can use the entropy difference between liquid and gas per kilogram (ds), the molecular weight of water (MW), and the change in pressure (dp). The change in internal energy (du) can be expressed as:

du = ds * MW

Substituting this into the equation for DT:

DT = (ds * MW) / dp

Given:

Entropy difference between liquid and gas per kilogram (ds) = 6.05e+03 J/(kg·K)

Molecular weight of water (MW) = 0.018 kg/mol

Change in pressure (dp) = 3.80e-01 Pa

Substituting the values into the equation:

DT = (6.05e+03 J/(kg·K) * 0.018 kg/mol) / 3.80e-01 Pa

Simplifying the expression:

DT = 1.07e-04 K

Therefore, the boiling point of water changes by approximately  1.07e-04 K when the pressure is reduced by 3.80e-01 Pa relative to atmospheric pressure.

When the pressure is reduced by a small amount of 3.80e-01 Pa relative to atmospheric pressure, the boiling point of water changes by approximately 1.07e-04 K.

To know more about boiling, visit:

https://brainly.com/question/1530966

#SPJ11

To calculate the partial pressure of Ne, we need to use the equation:

P(ne) = (n(ne) / n(total)) x P(total)

where P(ne) is the partial pressure of Ne, n(ne) is the number of moles of Ne, n(total) is the total number of moles of gas, and P(total) is the total pressure.

First, we need to calculate the number of moles of Ne and Ar:

n(ne) = 10.0g / 20.18 g/mol = 0.495 mol

n(ar) = 10.0g / 39.95 g/mol = 0.251 mol

The total number of moles is:

n(total) = n(ne) + n(ar) = 0.495 mol + 0.251 mol = 0.746 mol

Now we can use the equation to calculate the partial pressure of Ne:

P(ne) = (0.495 mol / 0.746 mol) x 1.6 atm = 1.06 atm

Therefore, the partial pressure of Ne in the mixture is 1.06 atm.
To find the partial pressure of Ne, we'll use the formula for partial pressure from Dalton's Law of Partial Pressures:

P_total = P_Ne + P_Ar

First, let's find the moles of Ne and Ar using their respective molar masses:

Molar mass of Ne = 20.18 g/mol
Moles of Ne = (10 g) / (20.18 g/mol) = 0.496 moles

Molar mass of Ar = 39.95 g/mol
Moles of Ar = (10 g) / (39.95 g/mol) = 0.250 moles

Next, we'll find the mole fractions of Ne and Ar:

Mole fraction of Ne = moles of Ne / (moles of Ne + moles of Ar) = 0.496 / (0.496 + 0.250) = 0.665

Mole fraction of Ar = moles of Ar / (moles of Ne + moles of Ar) = 0.250 / (0.496 + 0.250) = 0.335

Now we can use the mole fractions to find the partial pressures:

P_Ne = Mole fraction of Ne × P_total = 0.665 × 1.6 atm = 1.064 atm

So, the partial pressure of Ne is 1.064 atm.

To know more about partial pressure visit

https://brainly.com/question/30114830

SPJ11

To answer these questions, we need to understand the relationship between the wave speed, mass per unit length, and tension in a string.

The linear mass density (μ) is given by the mass of the wire divided by its length:

μ = mass / length

Given that the mass is 27 g and the length is 1 m, we can calculate μ in g/m:

μ = 27 g / 1 m = 27 g/m

To convert μ to kg/m, we need to divide the value in grams by 1000:

μ = 27 g / 1000 = 0.027 kg/m

Therefore, μ in kg/m for this wire is 0.027 kg/m.

The wave speed (v) in a string is related to the tension (T) and the linear mass density (μ) by the equation:

v = sqrt(T / μ)

Rearranging the equation, we can solve for tension (T):

T = μ * v^2

Given that μ = 0.027 kg/m and v = 2 m/s, we can calculate the tension in N:

T = 0.027 kg/m * (2 m/s)^2 = 0.027 kg/m * 4 m^2/s^2 = 0.108 N

Therefore, the tension in the wire is 0.108 N.

Learn more about tension in the wire from

https://brainly.com/question/14336853

#SPJ11

True. During a phone call, a cell phone emits the most radiation because it is actively transmitting data to the tower.

However, even when the phone is not in use, it emits small amounts of radiation periodically as it communicates with the network to stay connected. This is known as standby or idle radiation, and it can be reduced by turning off features such as Bluetooth and Wi-Fi when not in use.

It's important to note that while the amount of radiation emitted by cell phones is regulated by the Federal Communications Commission (FCC), there is still some debate over the potential long-term health effects of exposure to this type of radiation.

As a precaution, it's recommended to use a hands-free device or speakerphone during phone calls and to limit cell phone use whenever possible.

To know more about radiation visit -

brainly.com/question/31106159

#SPJ11

The value of r that indicates a stronger correlation than 0.40 is -0.80. The correct answer is option b.

The correlation coefficient (r) measures the strength and direction of a linear relationship between two variables. It ranges from -1 to 1. A positive value indicates a positive correlation, while a negative value indicates a negative correlation. The closer the value is to -1 or 1, the stronger the correlation.

Comparing the options, -0.30 (option a) and 0.38 (option c) have weaker correlations than 0.40, while 0 (option d) indicates no correlation. On the other hand, -0.80 (option b) has a stronger (negative) correlation than 0.40, as its absolute value is greater (0.80 > 0.40). Therefore, option b (-0.80) is the correct answer.

Learn more about correlation coefficient here:

https://brainly.com/question/29704223

#SPJ11

The dielectric constant, εᵣ, of a material is 4.73 x 10². It describes how well the material can store electrical energy and affects its capacitance in an electric field.

The capacitance of a capacitor with concentric conducting spherical shells is given by the formula C = (4πε₀a)/(1/b - 1/a), where a and b are the radii of the inner and outer shells, respectively, and ε₀ is the vacuum permittivity.

Rearranging the formula, we have ε₀ = (1/4πC)(1/a - 1/b).

Given the values of a, b, and C, we can substitute them into the formula and calculate ε₀. Taking the reciprocal of ε₀ gives us the dielectric constant εᵣ.

Using the given values:

ε₀ = (1/4π(5.8 x 10⁻⁶))(1/1.8 - 1/2.5) ≈ 2.54 x 10⁻¹¹ F/m

εᵣ = 1/ε₀ ≈ 4.73 x 10²

Magnitude of free charge q: 8.67 x 10⁻⁴ C.

The capacitance of a capacitor is given by the formula C = q/V, where q is the magnitude of the charge on the plates and V is the potential difference between the terminals.

Rearranging the formula, we have q = CV.

Substituting the given values, we have q = (5.8 x 10⁻⁶ F)(45 V) = 8.67 x 10⁻⁴ C.

Magnitude of induced charge q': 3.48 x 10⁻⁵ C.

The magnitude of the induced charge on the inner surface of the dielectric can be determined using the formula q' = q - CV, where q is the magnitude of the free charge on the plates and C is the capacitance.

Substituting the given values, we have q' = (8.67 x 10⁻⁴ C) - (5.8 x 10⁻⁶ F)(45 V) ≈ 3.48 x 10⁻⁵ C.

Magnitude of electric field at the midpoint: 1.02 x 10⁶ V/m.

The electric field between the plates of a capacitor is given by the formula E = V/d, where V is the potential difference between the plates and d is the distance between the plates.

Since the point is at the midpoint, the distance d is half the distance between the shells.

Substituting the given values, we have E = (45 V)/(0.035 m) = 1.02 x 10⁶ V/m.

Maximum safe voltage: 30.6 MV.

The maximum safe voltage that can be applied across the capacitor before it is ruined is determined by the dielectric strength.

The dielectric strength is given as 6 kV/mm, which is equivalent to 6 x 10⁶ V/m.

Multiplying this value by the thickness of the dielectric layer (b - a = 0.7 m), we have the maximum safe voltage as (6 x 10⁶ V/m)(0.7 m) = 4.2 x 10⁶ V. Converting to megavolts, we get 4.2 MV.

To know more about voltage, refer here:

https://brainly.com/question/13592820#

#SPJ4

Answer:

[tex]\Huge \boxed{\text{Impulse = 0.6 N s}}[/tex]

Explanation:

Let's start by defining impulse. By multiplying the force applied to the object by the time that the force was applied, the term "impulse" relates to a measure of the change in momentum of an object. Mathematically, this is written as:

[tex]\LARGE \boxed{\text{Impulse = Force $\times$ Time}}[/tex]

The football player kicks the ball in this case, with a force of 30 N, and his foot makes contact with it for 0.02 seconds. We can easily enter these values into the impulse formula to determine the impulse on the ball:

[tex]\LARGE \text{Impulse = Force $\times$ Time}\\\text{Impulse = 30 N $\times$ 0.02 s}\\\text{Impulse = 0.6 N s}[/tex]

So the impulse on the ball is 0.6 N s.

----------------------------------------------------------------------------------------------------------

Newton = N

Newton-Second = N s / N · s

0.02 s = 0.02 seconds

----------------------------------------------------------------------------------------------------------

To clarify further, we can use impulse as a measurement of how much the player's foot force changes the ball's momentum.

The ball's momentum is increased by the player by kicking it with a force of 30 N since momentum is calculated as the product of an object's mass and velocity. The impulse, which in this case is, 0.6 N s, determines how much momentum is added to the ball.

The celestial objects in increasing order of orbital period are: Mercury - Venus - Earth - Mars - Asteroid Belt - Jupiter - Saturn - Uranus - Neptune - Kuiper Belt.

The orbital period refers to the time taken by a celestial object to complete one orbit around another object. Based on the given options, we can arrange them in increasing order of their orbital periods.

Mercury has the shortest orbital period among the listed objects, as it orbits the Sun closest to it. Venus comes next, followed by Earth and then Mars. The Asteroid Belt consists of numerous asteroids that have a wide range of orbital periods, so it is placed after Mars.

Moving to the outer planets, Jupiter has a longer orbital period than the Asteroid Belt. After Jupiter, we have Saturn, Uranus, and Neptune, with each having a progressively longer orbital period.

Finally, the Kuiper Belt, which is a region beyond Neptune, contains a vast number of icy objects and has the longest orbital period among the listed options.

To know more about asteroids, refer here:

https://brainly.com/question/14101941#

#SPJ4

To find the speed of the waves, we can use the formula:

Speed = Distance/Time

Speed = 8.2 m / 3.4 s

Calculating this, we find:

Speed ≈ 2.41 m/s

Given that the distance between two wave crests is 8.2 m and the time it takes for the crests to pass the boat is 3.4 s, we can plug these values into the formula:

Speed = 8.2 m / 3.4 s

Calculating this, we find:

Speed ≈ 2.41 m/s

Therefore, the waves are traveling at approximately 2.41 m/s. This means that for every second, the wave crests move a distance of 2.41 meters. It's important to note that this calculation gives us the speed of the waves relative to the stationary boat. If we want to determine the absolute speed of the waves, we would need to consider the velocity of the boat and add it to the calculated speed.

Learn more about waves here

https://brainly.com/question/26116832

#SPJ11

The refrigerator must use approximately 24.1 J of electrical energy to maintain the temperature of 280 K inside for one hour.

In a Carnot refrigerator, the efficiency (η) is given by the formula η = 1 - (Tc/Th), where Tc is the temperature of the cold reservoir and Th is the temperature of the hot reservoir. The efficiency represents the fraction of input energy converted into work.

Since the refrigerator is absorbing 5.00 J of heat each hour, we can calculate the total input energy by dividing this value by the efficiency. The input energy is given by Ein = Qc / η, where Qc is the heat absorbed by the refrigerator. In this case, Ein = 5.00 J / (1 - (280 K / 300 K)).

To find the electrical energy used by the refrigerator, we multiply the input energy by the efficiency: E = Ein * η.

Therefore, E = 5.00 J / (1 - (280 K / 300 K)) * (1 - (280 K / 300 K)).

Calculating this expression gives us E ≈ 24.1 J, rounded to three significant figures.

To know more about energy, refer here:

https://brainly.com/question/1932868#

#SPJ4

As the slit separation in a double-slit experiment is increased, several changes can be observed in the resulting interference pattern:

Wider Fringes: The fringes, or bands of constructive and destructive interference, become wider. This is because increasing the slit separation leads to a larger distance between the two interfering waves, resulting in a greater variation in the path length difference.

Smaller Angular Spacing: The angular spacing between adjacent bright or dark fringes decreases. This means that the pattern becomes more compressed, with the fringes appearing closer together as the slit separation increases.

Diminished Intensity: The intensity of the bright fringes decreases. As the slit separation increases, the interference becomes less pronounced, resulting in a reduction in the brightness of the fringes.

Decreased Visibility of Interference Pattern: If the slit separation becomes too large, the interference pattern may start to fade away. The individual slits start to act more like separate light sources, and the characteristic interference pattern becomes less distinct.

Overall, increasing the slit separation in a double-slit experiment alters the appearance of the interference pattern, leading to wider fringes, smaller angular spacing, diminished intensity, and potentially reduced visibility of the interference effects.

Learn more about separation here

https://brainly.com/question/30365113

#SPJ11

We can use Torricelli's law to find the speed of efflux, which states that the speed of efflux is given by:

v = sqrt(2gh)

where v is the speed of efflux, g is the acceleration due to gravity, and h is the depth of the hole below the water level in the tank.

In this case, h = 14.0 m, and we can assume g = 9.81 m/s^2. The diameter of the hole is 6.00 mm, which gives a radius of 3.00 mm or 0.00300 m. The area of the hole is then:

A = πr^2 = 3.14 x (0.00300 m)^2 = 2.83 x 10^-5 m^2

The volume discharged per unit time can be found using the formula:

Q = Av

where Q is the volume discharged per unit time, A is the area of the hole, and v is the speed of efflux.

Substituting the values we get:

v = sqrt(2gh) = sqrt(2 x 9.81 m/s^2 x 14.0 m) ≈ 10.89 m/s

and

Q = Av = 2.83 x 10^-5 m^2 x 10.89 m/s ≈ 3.08 x 10^-4 m^3/s

Therefore, the speed of efflux is approximately 10.89 m/s, and the volume discharged per unit time is approximately 3.08 x 10^-4 m^3/s.

Learn more about speed from

https://brainly.com/question/13943409

#SPJ11