The work done by the tension force on Magnus is 2170 J.
What is work?
Work is the product of the force acting on an object and the distance through which the object moves. In other words, work is accomplished when a force is used to transfer energy to an object, causing the object to move some distance as a result.
The force of 1400 N, Distance of 1.55 meters, and a rope tied around Magnus's waist.
The work done by the tension force on Magnus is the product of the force exerted by the tension force and the distance through which Magnus is moved.
W = Fd
where W = Work done by the tension force on Magnus
F = Force of tension force
= 1400 Nd
= Distance moved by Magnus
= 1.55 m
Substituting these values:
W = 1400 N x 1.55 mW
= 2170 J
Hence, the work done by the tension force on Magnus is 2170 J.
To know more about work:
https://brainly.com/question/29762840
#SPJ11
how many turns of wire would be on a solenoid carrying a current 4.2 a if the solenoid is 15 cm in diameter, 247 cm long, and the field at the center is 2.7 x 10-3 t? n
To calculate the number of turns of wire on a solenoid carrying a current of 4.2 A, with a diameter of 15 cm, a length of 247 cm, and a field at the center of 2.7 x 10-3 T, we can use the following equation:
N = (Current x Length) / (PI x Field Strength x Diameter)
N = (4.2 x 247) / (3.14 x 2.7 x 10-3 x 15)
N = 1015 turns.
Therefore, the total turns are equal to 1015.
For more information regarding this topic, you can check the below link
https://brainly.com/question/1100341
#SPJ11
the resistance between the two ends must remain the same, so what diameter must be chosen for the new wire?
T diameter of the new wire must be 0.1572 m in order to maintain the same resistance between the two ends.
To determine the diameter of the new wire required to maintain the same resistance, we can use the equation
R = ρL/A,
where R is the resistance, ρ is the resistivity of the material, L is the length, and A is the cross-sectional area of the wire.
Since we know that the resistance must remain the same, we can rearrange the equation to solve for A:
A = ρL/R.
Plugging in the given values for resistivity, length, and resistance, we can calculate the required cross-sectional area of the wire:
A = ρL/R = (0.0005 Ω⋅m)(5 m)/(5 Ω) = 0.0025 m^2.
Since the cross-sectional area of the wire is circular, we can use the equation for the area of a circle A = πr^2 to solve for the radius r, and thus the diameter d of the new wire:
r = sqrt(A/π) = sqrt(0.0025 m^2/π) = 0.0786 m
d = 2r = 2 x 0.0786 m = 0.1572 m
Therefore, the diameter of the new wire must be 0.1572 m in order to maintain the same resistance between the two ends.
When the resistance between the two ends must remain the same, the diameter chosen for the new wire is directly proportional to the length of the wire. According to Ohm's law, resistance is directly proportional to length and inversely proportional to the cross-sectional area of the wire. Therefore, if the length of the wire doubles, the resistance doubles, and if the area of the wire doubles, the resistance is halved.This means that when the resistance between the two ends must remain the same, the diameter of the new wire must be such that the cross-sectional area of the wire is proportional to the length of the wire. In other words, if the new wire is half the length of the original wire, its diameter should be twice that of the original wire, and so on.
For more such questions on resistance , Visit:
https://brainly.com/question/17563681
#SPJ11
how much work was needed by an external force to assemble the three charges into the configuration above, assuming they started infinitely far away from each other?
The work was needed by an external force to assemble the three charges into the configuration are: q1= -4µC, q2 = +2 µC, and q3 = +6 µC are located at A, B, and C respectively. The distance between AB is 3m and the distance between BC is 4m.
The configuration is shown above: assuming they started infinitely far away from each other, External force is the force exerted by something outside of the system. It is a force from an external source. This work of assembling the three charges is performed by the external force. To calculate this, consider the configuration shown above.The work done by the external force is the potential energy of the charges.
The work is given byW = PEA potential energy of two charges is given by PE = kq1q2/r Where k = Coulomb’s constant = 9 x 10^9 Nm²/C²q1 and q2 = charges of two charges in Coulombsr = distance between the charges in meters as three charges are involved, calculate potential energy for each pair of charges and then add them.
W1 = Potential energy between charges A and B = k q1 q2 / r1W2 = Potential energy between charges B and C = k q2 q3 / r2W3 = Potential energy between charges A and C = k q1 q3 / r3Total potential energy W = W1 + W2 + W3 = kq1q2/r1 + kq2q3/r2 + kq1q3/r3 = 9 x 10^9 x [-4 x 10^-6 x 2 x 10^-6/3 + 2 x 10^-6 x 6 x 10^-6/4 + -4 x 10^-6 x 6 x 10^-6/5]W = -3.168 x 10^-5 Joule.
The negative sign indicates the work done by an external force to assemble the three charges into the configuration above, assuming they started infinitely far away from each other. Thus, the required work is 3.168 x 10^-5 Joule.
To know more about External force refer here:
https://brainly.com/question/29130400#
#SPJ11
calculate the time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed.
The time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed is 0.5 seconds.
The difference in electric potential between two places is known as voltage, often referred to as electric pressure, electric tension, or (electric) potential difference. It translates into the amount of work required to move a test charge between two points in a static electric field. Volt is the name of the voltage-derived unit in the International System of Units.
A capacitor, for example, or an electromotive force can build up electric charge and increase the voltage between two places (e.g., electromagnetic induction in generator, inductors, and transformers).
Electrochemical reactions (such as those in batteries and cells), the pressure-induced piezoelectric effect, and the thermoelectric effect can all produce potential differences on a macroscopic level.
To calculate the time it takes for the voltage across the resistor to reach 10.0V after the switch is closed, you can use the formula
t = RC,
where R is the resistance in Ohms and C is the capacitance in Farads.
Using the given values, the time it will take to reach 10.0V is
t = 10 Ω * 0.05F
= 0.5 seconds.
Therefore, the time it takes for the voltage across the resistor to reach 10.0 v after the switch is closed is 0.5 s.
For more such questions on voltage , Visit:
https://brainly.com/question/1176850
#SPJ11
Please help me with this physics question
Platinum would be a better material to use for passing heat from one material to another compared to carbon fiber.
Which material would be best to pass heat from material to another between platinum and carbon fiber?
Platinum is a better conductor of heat than carbon fiber. Platinum has a thermal conductivity of 71.6 W/(m·K), while the thermal conductivity of carbon fiber is much lower.
It's important to note that the specific application and conditions of the heat transfer process can also play a role in determining the most appropriate material to use.
Learn more about heat capacity:https://brainly.com/question/28302909
#SPJ1
a different guitar string makes 7680 oscillations in 30 seconds. what is the frequency of the sound waves that it creates?
The frequency of the sound waves created by the guitar string is 256 Hz.
The number of oscillations of the guitar string in 30 seconds is 7680.
The frequency of the guitar string is defined as the number of oscillations per second, so we can calculate the frequency by dividing the total number of oscillations by the time it took to make them:
frequency = number of oscillations / time
frequency = 7680 / 30 seconds = 256 Hz
Therefore, the frequency of the sound waves created by the guitar string is 256 Hz.
To know more about frequency click here:
https://brainly.com/question/15403215
#SPJ11
Coulomb's Law is a mathematical representation of the electric force between two objects. When solving for electric force, a student gets a negative answer. What does this indicate about the two objects?
They are oppositely charged and attracted to one another
They have like charges and attracted to one another
They are oppositely charged and are repulsed by one another
They have like charges and are repulsed by one another
A negative answer for electric force in coulombs law indicates that the two objects have opposite charges and are attracted to one another which is option A.
Coulombs law explained.Coulomb's Law is a fundamental principle of physics that describes the electrostatic force between electrically charged particles. It states that the magnitude of the electrostatic force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
The equation for Coulomb's Law is given by F = k * (q1 * q2) / r^2, where F is the force between the charges, k is Coulomb's constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
Coulomb's Law states that the magnitude of the electric force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The negative sign in the equation indicates that the force is attractive if the charges are opposite and repulsive if the charges are the same
Therefore, if a student gets a negative answer when solving for electric force, it means that the two objects have opposite charges and are attracted to one another.
Learn more about coulomb's law below.
https://brainly.com/question/506926
#SPJ1
you have been hired to design a spring-launched roller coaster that will carry two passengers per car. the car goes up a 10-m -high hill, then descends 15 m to the track's lowest point. you've determined that the spring can be compressed a maximum of 2.2 m and that a loaded car will have a maximum mass of 440 kg . for safety reasons, the spring constant should be 11 % larger than the minimum needed for the car to just make it over the top.
In order to design a spring-launched roller coaster that will carry two passengers per car, a spring constant of approximately 4255.78 N/m is needed for the roller coaster to be safe.
Several factors must be taken into consideration. The car must go up a 10-m-high hill and then descend 15 m to the track's lowest point. The maximum amount the spring can be compressed is 2.2 m, and a loaded car will have a maximum mass of 440 kg. Additionally, for safety reasons, the spring constant should be 11% larger than the minimum needed for the car to just make it over the top.
To determine the spring constant needed for the roller coaster, we can use the following formula:
U = (1/2)kx²where U is the potential energy of the spring, k is the spring constant, and x is the distance the spring is compressed. To find the minimum spring constant needed for the car to just make it over the top of the hill, we can set the potential energy of the spring equal to the potential energy of the car at the top of the hill:
U = mgh, where m is the mass of the car, g is the acceleration due to gravity, and h is the height of the hill.
U = (1/2)kx²mgh
= (1/2)kx²k = 2mgh/x²
Plugging in the given values, we get: k = 2(440 kg)(9.81 m/s²)(10 m)/(2.2 m)²k ≈ 3831.64 N/m. To find the spring constant needed for safety reasons, we can multiply the minimum spring constant by 1.11:k' = 1.11k' ≈ 4255.78 N/m
To know more about roller coaster, refer here:
https://brainly.com/question/15908029#
#SPJ11
calculate the resultant velocity of an airplane that normally flies at 250 km/h if it encounters a 50-km/h tailwind. answer in units of km/h.
The resultant velocity of an airplane that normally flies at 250 km/h with a 50-km/h tailwind is 300 km/h.
This is because the velocity of the tailwind adds to the airplane's velocity, creating a total velocity of 300 km/h.
Velocity is the speed at which something moves in a particular direction. It can increase or decrease depending on what it encounters on its path.
To calculate the resultant velocity, use the equation:
Resultant Velocity = (Initial Velocity + Wind Velocity)
Resultant Velocity = (250 km/h + 50 km/h)
Resultant Velocity = 300 km/h
Therefore, the resultant velocity of an airplane when it encounters a 50 km/h tailwind is 300 km/h.
To know more about velocity, refer here:
https://brainly.com/question/17127206#
#SPJ4
after conducting a series of experiments, a physicist concluded that the pressure around an object placed in a moving fluid is given by where is the square of the ratio of the speed of the fluid to the speed of sound, is a positive constant, and is a positive integer greater than 1. use linear approximation to prove that the pressure is approximately for small values of _____
The pressure around an object placed in a moving fluid can be proved using a point-slope form of a line.
Explanation:
Linear approximation is the process of approximating a function with a linear function that is tangent to the curve at a particular point. The formula provided in the question is as follows: Where is the square of the ratio of the speed of the fluid to the speed of sound, is a positive constant, and is a positive integer greater than 1. We are asked to use linear approximation to prove that the pressure is approximately for small values of x. To use linear approximation, we need to take the derivative of the function and evaluate it at the point we are approximating. This will give us the slope of the tangent line at that point.
The derivative of the function is: Now we need to evaluate the derivative at the point x = 0. This will give us the slope of the tangent line at that point. Plugging in x = 0, we get: the slope of the tangent line at x = 0 is 2c. Now we can use the point-slope form of a line to find the equation of the tangent line: Plugging in x = 0 and simplifying, we get the linear approximation of the function for small values of x.
To know more about buoyancy, visit:
https://brainly.com/question/7379745
#SPJ11
The river is an archetypal setting that is used in both The Aeneid and Hades: Lord of the Dead. Explain the symbolic importance of the river archetype and how it relates to the events described in the selections
The river archetype is a not unusual and powerful symbol in literature that represents the glide of time and the adventure of life. In both the texts, the river serves as a symbolic place that is deeply linked to the events defined within the choices.
The river archetype is a powerful symbol in many cultures and mythologies, representing the flow of life and the journey of the human soul. The river is often seen as a source of vitality and renewal, as well as a path toward transformation and self-discovery.
In literature and mythology, the river often serves as a metaphor for the passage of time and the inevitability of change. The river can be calm and gentle, or wild and dangerous, reflecting the ups and downs of life and the challenges we face on our journey. The river archetype can also represent the collective unconscious, the deep wellspring of human experience and wisdom that connects us all.
To learn more about River archetype visit here:
brainly.com/question/30975412
#SPJ4
in their most basic sense, waves are . they are generally classified by the disturbing force that causes the wave and the restoring force that returns the water to normal once it has passed. for example, the disturbing force for wind waves is usually and the restoring force is .
Answer:
The restoring force is Gravity.
Explanation:
In their most basic sense, waves are disturbances that travel through a medium, usually without the permanent displacement of the particles of the medium.
They are generally classified by the disturbing force that causes the wave and the restoring force that returns the water to normal once it has passed.
For example, the disturbing force for wind waves is usually wind and the restoring force is gravity.
Wind provides energy to the water, creating ripples and waves that travel across the surface of the water.
Gravity then acts to restore the surface of the water to its original state, pulling the water back down into the trough of the wave.
As the wave moves through the water, the water itself does not travel with the wave but instead moves in a circular motion, with the circular motion decreasing in size as it moves away from the wave.
This motion of the water is known as an orbital motion, with water particles moving in a circular motion but not traveling with the wave itself.
To know more about disturbing force:
https://brainly.com/question/28145728?
#SPJ11
when a honeybee flies through the air, it develops a charge of 20 pc . part a how many electrons did it lose in the process of acquiring this charge?
When a honeybee flies through the air, it acquires a charge of +20 pC. Part A: It loses 4 electrons in the process.
a point charge of 9.00 109 c is located at the origin. how much work is required to bring a positive charge of 3.00 109 c from infi nity to the location x 30.0 cm?
The amount of work required to bring a positive charge of 3.00 109 c from infinity to the location x 30.0 cm can be calculated using the formula W = qV, where W is the work, q is the charge, and V is the potential difference.
The potential difference for this situation is equal to the electric potential at 30.0 cm, which is equal to the electric potential from the 9.00 109 c point charge at the origin.
The work needed is equal to the charge multiplied by the potential difference, so W = qV = (3.00 109 c)(9.00 109 c/30.0 cm) = 9.00 108 c2/cm. This is the amount of work required to bring a positive charge of 3.00 109 c from infinity to the location x 30.0 cm.
Know more about work here
https://brainly.com/question/12469807#
#SPJ11
a transformer has 351 turns in the primary coil and 115 turns in the secondary coil. a. what kind of transformer is this (step-up or step-down)? b. by what factor does it change the voltage? c. by what factor does it change the current?
(a) The kind of transformer given in the problem is a Step-down transformer.
(b) It change the voltage by a factor of 0.328.
(c) It change the current by a factor of 3.05
According to the formula of a transformer, (Vp/Vs) = (Np/Ns)
Vp - primary voltage.
Vs - secondary voltage.
Np - Number of turns in the primary coil.
Ns - Number of turns in the secondary coil.
Since 351 > 115, that is Np > Ns, then Vp > Vs.
For a step-down transformer, Np > Ns. So it is a step-down transformer.
By putting these values in the formula, we get:
Vp/Vs = Np/Ns
Vp/Vs = 351 / 115 = 3.05
Voltage change factor (VCF) = Vs/Vp
VCF = 1/Vp/Vs
VCF = 1/3.05
VCF = 0.328
Therefore, the voltage change factor is 0.328.
The current change factor (CCF) is reciprocal to the voltage change factor. Thus,
CCF = Vp/Vs
CCF = 3.05
Therefore, the current change factor is 3.05.
Learn more about transformer here: https://brainly.com/question/25886292.
#SPJ11
while the general equations for the first and second law are written in terms of how the universe changes, dr. laude's preference is that we quickly rewrite them to reflect changes in what?
This is due to the fact that the first and second laws of thermodynamics are universally applicable fundamental principles that can be utilised to examine particular systems and processes.
How do chemical processes relate to the first and second laws of thermodynamics?The part of thermodynamics that deals with chemical reactions is called chemical thermodynamics. The first law states that energy is conserved and cannot be created or destroyed. Second law: When natural processes in a closed system result in a rise in entropy, they are spontaneous.
The second law of thermodynamics is what?According to the second rule of thermodynamics, an isolated system that is out of equilibrium over time must increase in entropy until it reaches the ultimate equilibrium value.
To know more about thermodynamics visit:-
https://brainly.com/question/15591590
#SPJ1
the cantilevered beam is made of a36 steel and is subjected to the loading shown. determine the displacement at b using the method of superposition. for a36 steel beam, the moment of inertia i
Thus using method of superposition, the total displacement is 0.0276.
A36 steel beam is used Cantilever beam is loaded. The moment of inertia is I. For A36 steel beam, I = 6667 in4 (approx.)As per the method of superposition, the total displacement of the beam at point B is given as follows:δtotal = δP + δWWhere,δP is the displacement of point B due to the point loadδW is the displacement of point B due to the uniformly distributed load.
Considering point load,P = 1500 lb. Distance of the point load from point B = 5 ft. Thus, the moment at point B due to point load can be calculated as follows: MBP = PL = 1500 × 5 = 7500 lb-ft. Similarly, considering uniformly distributed load,W = 200 lb/ft. Thus, the moment at point B due to uniformly distributed load can be calculated as follows:Mbw = (wL2)/12Where,L is the length of the beam= 10 ft
Therefore, Mbw = (200 × 102)/12 = 1667 lb-ft (approx.)Thus, total moment at point B,M = MBP + MBW= 7500 + 1667= 9167 lb-ft. Thus, using the formula for deflection of cantilever beam,δP = (PbL2)/(2EI) = (1500 × 52)/(2 × 29 × 106 × 6667) = 0.0026 inδW = (WbL3)/(3EI) = (200 × 5103)/(3 × 29 × 106 × 6667) = 0.024 in
Therefore, the displacement at point B is 0.0276 in.
To know more about superposition, refer here:
https://brainly.com/question/12493909#
#SPJ11
how many minutes will it take a car to travel 733 miles if the car is moving at a constant speed of 45mph
It will take the car 876 minutes to travel 733 miles at a constant speed of 45 mph.
To find out how many minutes it will take a car to travel 733 miles if the car is moving at a constant speed of 45 mph, we can use the formula:
Time = Distance / Speed
Time is in hours
Distance is in miles
Speed is in miles per hour
So,Time = Distance / Speed
Time = 733 miles / 45 mph
Let's simplify this,Time = (733/45) hours
Since we want the answer in minutes, we will multiply the answer by 60.Time = (733/45) * 60
Time = 876 minutes
Therefore, it will take the car 876 minutes to travel 733 miles at a constant speed of 45 mph.
To learn more about distance:
https://brainly.com/question/15172156#
#SPJ11
a diver jumps off the diving board. he pushes himself downward at a rate of 2 m/s. gravity increases his downward velocity to 6 m/s when he hits tthe water 1.5 seconds later. what is his acceleration?
The diver's acceleration is 2.67 m/s^2.
We can use the formula for acceleration:
a = (vf - vi) / t
where a is acceleration, vf is final velocity, vi is initial velocity, and t is time.
In this problem, the initial velocity (vi) is 2 m/s downward, the final velocity (vf) is 6 m/s downward, and the time (t) is 1.5 seconds.
Plugging in these values, we get:
a = (6 m/s - 2 m/s) / 1.5 s
a = 4 m/s / 1.5 s
a = 2.67 m/s^2
As a result, the acceleration of the diver is 2.67 m/s^2.
Learn more about diver's acceleration at: https://brainly.com/question/25094023
#SPJ11
are two particles moving away from an observer in opposite directions at light speed traveling at twice the speed of lioght?
Two particles moving away from an observer in opposite directions at the speed of light are not traveling at twice the speed of light.
The speed of light, symbolized by c, is a constant of nature that is defined as the distance light travels in a vacuum during one second (299,792,458 meters, or about 186,282 miles per second).
The speed of light is constant, and nothing can travel faster than it.
It is the maximum speed at which energy, matter, or information can travel in a vacuum without violating the laws of physics.
According to Albert Einstein's theory of relativity, nothing can travel faster than the speed of light, so no matter how fast something is moving away from an observer, it cannot exceed the speed of light.
Learn more about Speed of light here:
https://brainly.com/question/104425
#SPJ11
What is the mass of a student who weighs 524 newton
Mass of the student is approximately 53.47 kilograms.
The mass of a student who weighs 524 Newton can be calculated using the formula: Weight = Mass x Gravity
Assuming the acceleration due to gravity is approximately 9.8 meters per second squared on the Earth's surface : Mass = Weight / Gravity
Substituting the given weight of 524 Newton, we get:
Mass = 524 N / 9.8 m/s^2 ≈ 53.47 kg
The mass of the student is approximately 53.47 kilograms. It is important to note that mass is a measure of the amount of matter in an object and is different from weight, which is the force exerted on an object due to gravity.
To know more about Mass, here
brainly.com/question/19694949
#SPJ4
A pumpkin with a mass of 3.0 kg is launched from a catapult at an initial height of 3.5 meters off the ground, with an initial speed of 16.2 m/s. What height is the pumpkin at when the speed is half its initial speed? Round your answer to 2 decimal places.
Answer:
3.35 m
Explanation:
v2= 16.2/2 = 8.1
at half the velocity KE= 1/2 x 3 x 8.1^2 = 98. 415
orginal gpe = 3 x 9.8 x 3.5 = 102.9
energy lost = 102.9 - 98.415 = 4.485
m x g x change in height = 4.485
change in height = 4.485/(3x9.8) = 0.1525
new height = 3.5 - 0.1525 = 3.35
you have two flat metal plates, each of area 2.00 m2, with which to construct a parallel-plate capacitor. if the capacitance of the device is to be 1.00 f, what must be the separation between the plates?
The capacitance of the device is to be 1.00 f, the separation distance between the plates is 1.77 × 10⁻¹³ m.
We have two flat metal plates of area 2.00 m² each with which to construct a parallel-plate capacitor. If the capacitance of the device is to be 1.00 F
Given:
Area of each plate = 2.00 m²
Capacitance of the device = 1.00 F
We know that the capacitance of a parallel-plate capacitor is given by:
C = εA/d
Where C is the capacitance of the parallel plate capacitor, ε is the permittivity of the material between the plates, A is the area of the plate, and d is the separation distance between the plates.
Rearranging this equation we get:
d = εA/C
Now, to find the separation distance, we need to know the permittivity of the material between the plates. The permittivity of a vacuum is 8.85 × 10⁻¹² F/m.
Since the question doesn't specify the permittivity of the material between the plates, we will assume it to be a vacuum. So,
ε = 8.85 × 10⁻¹² F/m²
Substituting the values of ε, A, and C, we get:
d = εA/C= (8.85 × 10⁻¹² F/m²) × (2.00 m²) / (1.00 F)
= 17.7 × 10⁻¹² m²/F /F= 17.7 × 10⁻¹² m
= 1.77 × 10⁻¹³ m
Therefore, the separation distance between the plates is 1.77 × 10⁻¹³ m.
For more such questions on distance , Visit:
https://brainly.com/question/26550516
#SPJ11
a ball is dropped from a distance 5 m above the ground, and it hits the ground with a certain speed. if the same ball is dropped from a distance 10 m above the ground, its final speed will be
The final speed of the ball dropped from a distance of 10 meters will be 49 m/s.
The final speed of the ball dropped from a distance of 10 meters will be higher than the final speed of the ball dropped from a distance of 5 meters. This is because of the effect of gravity on the ball.
As the ball falls, gravity will pull it toward the ground, giving it a greater speed as it falls further. This increase in speed is known as the "acceleration due to gravity."
When the ball is dropped from 10 meters, the ball will fall faster because of the increased distance it has to travel, allowing gravity to pull it down more quickly.
By the time it reaches the ground, it will have reached a higher velocity.
The equation for this acceleration due to gravity is:
Vf = Vi + g × t
Where Vf is the final speed, Vi is the initial speed, g is the acceleration due to gravity and t is the time.
Therefore, in order to calculate the final speed of the ball dropped from 10 meters, we can use this equation. Assuming the initial speed of the ball is zero and the acceleration due to gravity is 9.8 m/s2, we get:
Vf = 0 + 9.8 × (10/2)
Vf = 49 m/s
So, the final speed of the ball dropped from a distance of 10 meters will be 49 m/s.
to know more about speed refer here:
https://brainly.com/question/28224010#
#SPJ11
determine the limit on the series resistance so the energy remaining after one hour is at least 85 percent of the initial energy.
The limit on the series resistance so that the energy remaining after one hour is at least 85 percent of the initial energy, is initial energy into 85% by the voltage.
Ohm's Law states that the current in a circuit is directly proportional to the voltage and inversely proportional to the resistance.
Therefore, the total resistance in a circuit can be calculated using the formula: R = V/I
The energy remaining after one hour must be at least 85 percent of the initial energy, we can calculate the resistance by rearranging the formula.
The total resistance can be determined by multiplying the initial energy by 85 percent and dividing it by the voltage. Thus, the limit on the series resistance is [tex]R = (Initial Energy *0.85) / V[/tex].
To learn more about the series resistance:
https://brainly.in/question/28887091
#SPJ11
piezoelectricity is a property where quartz crystals vibrate 100,000 times a second if heated to 100 degrees celsius. group of answer choices true false
The given statement, "piezoelectricity is a property where quartz crystals vibrate 100,000 times a second if heated to 100 degrees Celsius" is false because piezoelectricity is a property of certain materials, including quartz crystals, that generates an electric charge in response to mechanical stress or pressure, not heat.
Piezoelectricity is a property of certain materials, including quartz crystals, that generates an electrical voltage in response to mechanical stress or pressure. Heating quartz crystals to 100 degrees Celsius does not cause them to vibrate 100,000 times per second, although it may affect their piezoelectric properties in other ways. The frequency of vibration for a quartz crystal oscillator is determined by its physical dimensions and properties, and may be in the range of thousands or millions of vibrations per second, depending on the design and application of the oscillator.
To know more about Piezoelectricity, here
brainly.com/question/13667339
#SPJ4
Help, I cant do it by myself and I really need this done. Please.
Part One
Text Version
Image shows a lake, a factory, a cloud in the sky, a cow, dead organisms, a tree, and the sun. An arrow from the sun to the tree is labeled A. An arrow from the sky to the tree is labeled B. The sky is labeled C above the cloud. The letter D is in the air and an arrow points from it down to dead organisms. An arrow points from dead organisms to the ground labeled E. An arrow points from the cow into to the sky labeled F. An arrow points from the factory to the sky labeled G. An arrow from the sky to the lake is labeled H above the lake.
Using the diagram above, match the description to the corresponding location in the carbon cycle model. Provide the letter only.
Carbon dioxide is converted to sugar used for food.
Location:
Carbon trapped in fossil fuels is converted to carbon dioxide.
Location:
Organic carbon is converted to fossil fuels.
Location:
Carbon dioxide is converted to carbonates.
Location:
Sugar is broken down and converted to carbon dioxide.
Location:
Part Two
Text Version
Images shows a lake labeled carbonates in water, a cow labeled animal respiration, a tree labeled photosynthesis, a factory labeled factory emissions, the sun labeled sunlight, a cloud labeled carbon dioxide in atmosphere, another tree labeled plant respiration, an arrow from organic carbon to dead organism, and fossils and fossil fuels. Arrows are labeled as follows: A from the sunlight to photosynthesis, B from carbon dioxide in atmosphere to photosynthesis, C from factory emissions to carbon dioxide in atmosphere, D from carbon dioxide in atmosphere to carbonates in water, E from dead organisms to fossils and fossil fuels, and F from plant respiration to the sky.
Using the diagram above, answer the following questions:
True or False. The arrow labeled C represents a transfer of chemical energy to mechanical energy. Explain why this is true or false.
True or False. The arrow labeled A represents a transfer of solar energy to chemical energy. Explain why this is true or false.
Which arrow or arrows represent a release of carbon dioxide? What process is occurring at the arrow(s) you selected?
Which arrow or arrows indicate a process that cycles carbon from living or nonliving organisms? Describe the process or processes you selected.
Which arrow or arrows represent reactions that demonstrate a conservation of mass and energy? Explain your answer.
Answer:
Part One:
Location: A - The arrow from the sun to the tree represents photosynthesis, where carbon dioxide is converted to sugar used for food.
Answer: A
Location: G - The arrow from the factory to the sky represents the release of carbon dioxide from factory emissions, which contributes to the conversion of carbon trapped in fossil fuels to carbon dioxide.
Answer: G
Location: E - The arrow from dead organisms to the ground represents the process where organic carbon is converted to fossil fuels over a long period of time.
Answer: E
Location: D - The arrow from the air to dead organisms represents the conversion of carbon dioxide to carbonates, which can be deposited in the ocean and form rocks over millions of years.
Answer: D
Location: F - The arrow from the cow to the sky represents animal respiration, where sugar is broken down and converted to carbon dioxide.
Answer: F
Part Two:
True or False. The arrow labeled C represents a transfer of chemical energy to mechanical energy. Explain why this is true or false.
False. The arrow labeled C represents the transfer of chemical energy (carbon dioxide) from the factory emissions to the atmosphere. There is no mechanical energy involved in this process.
True or False. The arrow labeled A represents a transfer of solar energy to chemical energy. Explain why this is true or false.
True. The arrow labeled A represents photosynthesis, where solar energy is used to convert carbon dioxide into chemical energy in the form of sugar.
Which arrow or arrows represent a release of carbon dioxide? What process is occurring at the arrow(s) you selected?
Arrows C and F represent a release of carbon dioxide. Arrow C represents the release of carbon dioxide from factory emissions, while arrow F represents animal respiration where sugar is broken down to release carbon dioxide.
Which arrow or arrows indicate a process that cycles carbon from living or nonliving organisms? Describe the process or processes you selected.
Arrows B, D, and E indicate processes that cycle carbon from living or nonliving organisms. Arrow B represents photosynthesis where carbon dioxide is taken up by plants, arrow D represents the conversion of carbon dioxide to carbonates which can be deposited in the ocean and form rocks over millions of years, and arrow E represents the conversion of dead organisms into fossil fuels over a long period of time.
Which arrow or arrows represent reactions that demonstrate a conservation of mass and energy? Explain your answer.
All arrows in the diagram demonstrate the conservation of mass and energy. The carbon cycle is a closed system, meaning that the total mass of carbon in the cycle remains constant over time. Energy is also conserved as it is converted from one form to another throughout the cycle.
a parallel-plate capacitor has a plate area of 12.9 cm2 and a capacitance of 9 pf . what is the plate separation? the value of the permittivity of a vacuum is
Answer:For parallel plate capacitors, the capacitance (dependent on its geometry) is given by the formula C=ϵ⋅Ad C = ϵ ⋅ A d , where C is the value of the capacitance, A is the area of each plate, d is the distance between the plates, and ϵ is the permittivity of the material between the plates of the parallel capacitor.
the first edition of this textbook came out in 1993. why have the authors had to completely rewrite this chapter on planetary system formation?
Answer: The authors had to completely rewrite this chapter on planetary system formation because scientific knowledge and understanding of the topic have advanced significantly since the first edition of the textbook came out in 1993. For example, we now have a better understanding of how different planets form and the role of collisions in the formation of a solar system.
Why have the authors had to completely rewrite this chapter on planetary system formation?
The authors have had to completely rewrite this chapter on planetary system formation because of the new discoveries made in the field of astronomy. Over the years, several discoveries have been made, which have changed our understanding of how planets form.
There are various methods by which planets can form, and new discoveries have been made in this area, which are in conflict with the previously accepted theories.
As a result, the authors had to rewrite the chapter to incorporate these new discoveries and theories. This ensures that the textbook remains up-to-date and accurate.
A textbook on planetary system formation was published in 1993. Since then, several discoveries have been made in the field of astronomy. As a result, the authors have had to completely rewrite this chapter on planetary system formation.
Learn more about planetary system formation here:
https://brainly.com/question/1477348#
#SPJ11
the average distance from mars to the sun is 1.524 astronomical units (1.524 au) and the eccentricity of mars' orbit is 0.0935. what is the distance from the mars to the sun in astronomical units when mars is at perihelion?
The distance from Mars to the sun in astronomical units when Mars is at perihelion is 1.381 astronomical units.
What is perihelion?Perihelion is the point in the orbit of a planet or other celestial body where it is closest to the sun. This concept applies to planets in the Solar System, such as Mars. Kepler's laws of planetary motion explain how planets move around the sun in elliptical orbits, with the sun at one of the two foci of the ellipse.
The distance between Mars and the sun varies since Mars has an elliptical orbit. Mars' average distance from the sun is 1.524 astronomical units. The distance from Mars to the sun in astronomical units when Mars is at perihelion is given as 1.381 astronomical units. The eccentricity of Mars' orbit is also given as 0.0935. Eccentricity is the degree of elongation of an elliptical orbit, with a value ranging from 0 to 1. An orbit is circular when its eccentricity is 0, whereas it is more elongated as the value approaches 1.
Learn more about Perihelion here: https://brainly.com/question/913716.
#SPJ11