Based on Melanie's simulation, if the observed proportion of trials with 1 six in 40 rolls consistently deviates from the expected probability of a fair die,
Based on Melanie's computer simulation, where she rolled the die 40 times and repeated the process 100 times, she can make an inference regarding the fairness of the die.
If the die were fair, we would expect the probability of rolling a six on any given roll to be 1/6 (approximately 0.1667) since there are six possible outcomes (numbers 1 to 6) on a fair six-sided die.
In Melanie's simulation, she observed 1 six in 40 rolls in one of the trials. By repeating this simulation 100 times, she can calculate the proportion of trials that resulted in exactly 1 six in 40 rolls. Let's assume she obtained "p" trials out of 100 trials where she observed 1 six in 40 rolls.
If the die were fair, the expected probability of getting exactly 1 six in 40 rolls would be determined by the binomial distribution with parameters n = 40 (number of trials) and p = 1/6 (probability of success on a single trial). Melanie can use this binomial distribution to calculate the expected probability.
By comparing the proportion of observed trials (p) with the expected probability, Melanie can assess the fairness of the die. If the observed proportion of trials with 1 six in 40 rolls is significantly different from the expected probability (0.1667), it would suggest that the die may not be fair.
For example, if Melanie's simulation consistently yields proportions significantly higher or lower than 0.1667, it could indicate that the die is biased towards rolling more or fewer sixes than expected.
To draw a definitive conclusion, Melanie should perform statistical tests, such as hypothesis testing or confidence interval estimation, to determine the level of significance and assess whether the observed results are statistically significant.
In summary, based on Melanie's simulation, if the observed proportion of trials with 1 six in 40 rolls consistently deviates from the expected probability of a fair die, it would suggest that the die may not be fair. Further statistical analysis would be needed to make a conclusive determination about the fairness of the die.
for more such question on probability visit
https://brainly.com/question/251701
#SPJ8
A researcher wishes to estimate the proportion of adults who have high-speed Internet access. What size sample should be obtained if she wishes the estimate to be within 0.030.03 with 9090 % confidence if (a) she uses a previous estimate of 0.580.58 ? (b) she does not use any prior estimates?
the sample size required to estimate the proportion of adults with high-speed Internet access depends on whether a prior estimate is 753
(a) When using a previous estimate of 0.58, we can calculate the sample size. The formula for sample size estimation is n =[tex](Z^2 p q) / E^2,[/tex] where Z is the Z-score corresponding to the desired confidence level, p is the estimated proportion, q is 1 - p, and E is the desired margin of error.
Using a Z-score of 1.645 for a 90% confidence level, p = 0.58, and E = 0.03, we can calculate the sample size:
n = [tex](1.645^2 0.58 (1 - 0.58)) / 0.03^2[/tex]) ≈ 806.36
Therefore, a sample size of approximately 807 should be obtained.
(b) Without any prior estimate, a conservative estimate of 0.5 is commonly used to calculate the sample size. Using the same formula as above with p = 0.5, the sample size is:
n = [tex](1.645^2 0.5 (1 - 0.5)) / 0.03^2[/tex] ≈ 752.89
In this case, a sample size of approximately 753 should be obtained.
Learn more about proportion here:
https://brainly.com/question/31548894
#SPJ11
Write the infinite series using sigma notation. 6 6 6+ 6 2 6 3 Σ n = The form of your answer will depend on your choice of the lower limit of summation. Enter infinity for .
The series will converge or diverge depending on the value of 6ⁿ⁺¹. If the value exceeds 1, the series diverges, while if it approaches 0, the series converges.
The given infinite series can be written using sigma notation as:
Σₙ₌₁ⁿ 6ⁿ⁺¹
The lower limit of summation is 1, indicating that the series starts with n = 1. The upper limit of summation is not specified and is denoted by "n", which implies the series continues indefinitely.
In sigma notation, Σ represents the summation symbol, and n is the index variable that takes on integer values starting from the lower limit (in this case, 1) and increasing indefinitely.
The term inside the sigma notation is 6ⁿ⁺¹, which means we raise 6 to the power of (n+1) for each value of n and sum up all the terms.
As n increases, the series expands by adding additional terms, each term being 6 raised to the power of (n+1).
To know more about sigma notation click on below link:
https://brainly.com/question/30518693#
#SPJ11
Find the volume of the composite figures (pls)
The volumes are 1) 81π mi³, 2) 384π cm³ and 3) 810 m³
Given are composite solids we need to find their volumes,
1) To find the volume of the solid composed of a cylinder and a hemisphere, we need to find the volumes of the individual components and then add them together.
Volume of the cylinder:
The formula for the volume of a cylinder is given by cylinder = πr²h, where r is the radius and h are the height.
Given:
Radius of the cylinder, r = 3 mi
Height of the cylinder, h = 7 mi
Substituting the values into the formula:
Cylinder = π(3²)(7)
= 63π mi³
Volume of the hemisphere:
The formula for the volume of a hemisphere is given by hemisphere = (2/3)πr³, where r is the radius.
Given:
Radius of the hemisphere, r = 3 mi
Substituting the value into the formula:
Hemisphere = (2/3)π(3³)
= (2/3)π(27)
= 18π mi³
Total volume of the solid:
Total = V_cylinder + V_hemisphere
= 63π + 18π
= 81π mi³
Therefore, the volume of the solid composed of a cylinder and a hemisphere is 81π cubic miles.
2) To find the volume of the solid composed of a cylinder and a cone, we will calculate the volumes of the individual components and then add them together.
Volume of the cylinder:
The formula for the volume of a cylinder is given by V_cylinder = πr²h, where r is the radius and h is the height.
Given:
Radius of the cylinder, r = 6 cm
Height of the cylinder, h = 9 cm
Substituting the values into the formula:
V_cylinder = π(6²)(9)
= 324π cm³
Volume of the cone:
The formula for the volume of a cone is given by V_cone = (1/3)πr²h, where r is the radius and h is the height.
Given:
Radius of the cone, r = 6 cm
Height of the cone, h = 5 cm
Substituting the values into the formula:
V_cone = (1/3)π(6²)(5)
= 60π cm^3
Total volume of the solid:
V_total = V_cylinder + V_cone
= 324π + 60π
= 384π cm³
Therefore, the volume of the solid composed of a cylinder and a cone is 384π cubic centimeters.
3) To find the volume of the solid composed of a rectangular prism and a prism on top, we will calculate the volumes of the individual components and then add them together.
Volume of the rectangular prism:
The formula for the volume of a rectangular prism is given by V_prism = lwh, where l is the length, w is the width, and h is the height.
Given:
Length of the rectangular prism, l = 5 m
Width of the rectangular prism, w = 9 m
Height of the rectangular prism, h = 12 m
Substituting the values into the formula:
V_prism = (5)(9)(12)
= 540 m³
Volume of the prism on top:
The formula for the volume of a prism is given by V_prism = lwb, where l is the length, w is the width, and b is the height.
Given:
Length of the prism on top, l = 5 m
Width of the prism on top, w = 9 m
Height of the prism on top, b = 6 m
Substituting the values into the formula:
V_prism = (5)(9)(6)
= 270 m³
Total volume of the solid:
V_total = V_prism + V_prism
= 540 + 270
= 810 m³
Therefore, the volume of the solid composed of a rectangular prism and a prism on top is 810 cubic meters.
Hence the volumes are 1) 81π mi³, 2) 384π cm³ and 3) 810 m³
Learn more about volumes click;
https://brainly.com/question/28058531
#SPJ1
In the 2013 Jery’s Araruama art supplies catalogue, there are 560 pages. Eight of the pages feature signature artists. Suppose we randomly sample 100 pages. Let X represents the number of pages that feature signature artists.
1) What are the possible values of X?
2) What is the probability distribution?
3) Find the following probabilities:
- a) The probability that two pages feature signature artists
- b) The probability that at most six pages feature signature artists
- c) The probability that more than three pages feature signature artists.
4) Using the formulas, calculate the
- (i) mean and
- (ii) standard deviation.
1) The possible values of X, the number of pages that feature signature artists, can range from 0 to 8.
Since there are only 8 pages out of the 560 total that feature signature artists, the maximum number of pages that can be selected in the sample is 8.
2) The probability distribution of X can be modeled by the binomial distribution since each page in the sample can either feature a signature artist (success) or not (failure). The parameters of the binomial distribution are n = 100 (number of trials) and p = 8/560 = 0.0143 (probability of success on each trial).
3)
a) The probability that two pages feature signature artists can be calculated using the binomial probability formula:P(X = 2) = C(100, 2) * (8/560)² * (1 - 8/560)⁽¹⁰⁰⁻²⁾
b) The probability that at most six pages feature signature artists can be found by summing the probabilities of X being 0, 1, 2, 3, 4, 5, and 6:
P(X ≤ 6) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4) + P(X = 5) + P(X = 6)
c) The probability that more than three pages feature signature artists can be calculated by subtracting the probability of X being 0, 1, 2, and 3 from 1:P(X > 3) = 1 - (P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3))
4)
(i) The mean (μ) of a binomial distribution is given by μ = np, where n is the number of trials and p is the probability of success on each trial. In this case, μ = 100 * (8/560).
(ii) The standard deviation (σ) of a binomial distribution is given by σ = sqrt(np(1-p)), where n is the number of trials and p is the probability of success on each trial. In this case, σ = sqrt(100 * (8/560) * (1 - 8/560)).
By plugging in the values for μ and σ, you can calculate the mean and standard deviation.
Learn more about probability here:
https://brainly.com/question/32117953
#SPJ11
Solve the following initial value problem by using Laplace
transform (a) y ′′ + 9y = cos 2, y(0) = 1, y ′ (0) = 3 (b) y ′′ +
25y = 10(cos 5 − 2 sin 5) , y(
Therefore, the solutions to the initial value problems by using the Laplace transform are:
[tex](a) y(t) = e^(-3t) cos(3t) + (1/2)sin(2t)[/tex]
[tex](b) y(t) = 10sin(5t) - 20cos(5t)[/tex]
To solve the initial value problem using Laplace transform, we'll apply the Laplace transform to both sides of the given differential equation and use the initial conditions to find the solution.
(a) Applying the Laplace transform to the differential equation and using the initial conditions, we have:
[tex]s²Y(s) - sy(0) - y'(0) + 9Y(s) = 1/(s² + 4)[/tex]
Applying the initial conditions y(0) = 1 and y'(0) = 3, we can simplify the equation:
[tex]s²Y(s) - s(1) - 3 + 9Y(s) = 1/(s² + 4)(s² + 9)Y(s) - s - 3 = 1/(s² + 4)Y(s) = (s + 3 + 1/(s² + 4))/(s² + 9)[/tex]
Using partial fraction decomposition, we can write:
[tex]Y(s) = (s + 3)/(s² + 9) + 1/(s² + 4)[/tex]
Taking the inverse Laplace transform, we get:
[tex]y(t) = e^(-3t) cos(3t) + (1/2)sin(2t)[/tex]
(b) Following the same steps as in part (a), we can find the Laplace transform of the differential equation:
[tex]s²Y(s) - sy(0) - y'(0) + 25Y(s) = 10(1/(s² + 25) - 2s/(s² + 25))[/tex]
Simplifying using the initial conditions y(0) = 0 and y'(0) = 0:
[tex]s²Y(s) + 25Y(s) = 10(1/(s² + 25) - 2s/(s² + 25))(s² + 25)Y(s) = 10(1 - 2s/(s² + 25))Y(s) = 10(1 - 2s/(s² + 25))/(s² + 25)[/tex]
Using partial fraction decomposition, we can write:
[tex]Y(s) = 10/(s² + 25) - 20s/(s² + 25)[/tex]
Taking the inverse Laplace transform, we get:
[tex]y(t) = 10sin(5t) - 20cos(5t)[/tex]
Therefore, the solutions to the initial value problems are:
[tex](a) y(t) = e^(-3t) cos(3t) + (1/2)sin(2t)[/tex]
[tex](b) y(t) = 10sin(5t) - 20cos(5t)[/tex]
learn more about Laplace Transform here:
https://brainly.com/question/30759963
#SPJ11
what is the area of the region enclosed by the graphs of f(x)=x−2x2 and g(x)=−5x?
The area of the region enclosed by the graphs of the functions f(x) = x - 2x^2 and g(x) = -5x is [X] square units.
To find the area of the region enclosed by the graphs of the functions, we need to determine the points of intersection between the two curves. Setting the equations equal to each other, we have x - 2x^2 = -5x. Simplifying this equation, we get 2x^2 - 6x = 0, which can be further reduced to x(2x - 6) = 0. This equation yields two solutions: x = 0 and x = 3.
To find the area, we integrate the difference between the two functions with respect to x over the interval [0, 3]. The integral of f(x) - g(x) gives us the area under the curve f(x) minus the area under the curve g(x) within the interval. Evaluating the integral, we find the area to be [X] square units.
Learn more about area here:
https://brainly.com/question/16151549
#SPJ11
Evaluate the line integral by the two following methods.
x dx + y dy
C consists of the line segments from (0, 4) to (0, 0) and from (0, 0) to (2, 0) and the parabola y = 4 - x2 from (2, 0) to (0, 4).
(a) directly
(b) using Green's Theorem
The line integral ∫(x dx + y dy) over the path C can be evaluated using two methods: (a) directly, by parameterizing the path and integrating, and (b) using Green's Theorem, by converting the line integral to a double integral over the region enclosed by the path.
(a) To evaluate the line integral directly, we can break the path C into its three segments: the line segment from (0, 4) to (0, 0), the line segment from (0, 0) to (2, 0), and the curve y = 4 - x^2 from (2, 0) to (0, 4). For each segment, we parameterize the path and compute the integral. Then, we add up the results to obtain the total line integral.
(b) Using Green's Theorem, we can convert the line integral to a double integral over the region enclosed by the path C. The line integral of (x dx + y dy) along C is equal to the double integral of (∂Q/∂x - ∂P/∂y) dA, where P and Q are the components of the vector field associated with x and y, respectively. By evaluating this double integral, we can find the value of the line integral.
Both methods will yield the same result for the line integral, but the choice of method depends on the specific problem and the available information. Green's Theorem can be more efficient for certain cases where the path C encloses a region with a simple boundary, as it allows us to convert the line integral into a double integral.
Learn more about Green's Theorem here:
https://brainly.com/question/30763441
#SPJ11
Luke and Bertha Johnson file jointly. Their dependent son, aged 5, live with all. The Johsons only income was $19,442 from dividends and interest. Which of the following statements is true regarding the earned income credit?
A. The Johnsons cannot claim the credit because their earned income is too high
B. The Johnsons cannot claim the credit because their AGI is too high
C. The Johnsons cannot claim the credit because their investment income is too high
D. The Johnsons cannot claim the credit because their son is too old
The Johnsons cannot claim the earned income credit because their investment income is too high.
The earned income credit is a tax credit designed to provide relief to low-income working individuals and families. To be eligible for the credit, taxpayers must have earned income, such as wages or self-employment income. Investment income, such as dividends and interest, does not count as earned income for the purposes of the earned income credit. In this case, the Johnsons' only income is from dividends and interest, which means they do not have any earned income and therefore cannot claim the credit. It is important to note that the Johnsons' AGI and the age of their son are not relevant factors for determining eligibility for the earned income credit.
Option C is the correct answer of this question.
Learn more about income credit here:
https://brainly.com/question/14304054
#SPJ11
5) Determine the concavity and inflection points (if any) of -36 ye-e 609 MA
The concavity of this function is concave up and there are no inflection points.
The graph of this equation is a hyperbola with a concave upwards shape since it is in the form y = a/x + b.
Hyperbolas do not have inflection points, however, it does have two distinct vertex points located at (-36, 609) and (36, 609).
To know more about concavity refer here:
https://brainly.com/question/29142394#
#SPJ11
"1. Solve for x: a) tan2 (x) – 1 = 0
b) 2 cos2 (x) − 1 = 0
c) 2 sin2 (x) + 15 sin(x) + 7 = 0
2. Use the desmos graphing calculator to find all solutions of
the given equation.
a) The solutions for the equation tan^2(x) - 1 = 0 are x = nπ, where n is an integer.
b) The solutions for the equation 2cos^2(x) - 1 = 0 are x = (n + 1/2)π, where n is an integer.
c) The solutions for the equation 2sin^2(x) + 15sin(x) + 7 = 0 can be found using the quadratic formula: x = (-15 ± √(15^2 - 4(2)(7))) / (4).
a) To solve the equation tan^2(x) - 1 = 0, we can rewrite it as tan^2(x) = 1. Taking the square root of both sides gives us tan(x) = ±1. Since the tangent function has a period of π, the solutions can be expressed as x = nπ, where n is an integer.
b) For the equation 2cos^2(x) - 1 = 0, we can rewrite it as cos^2(x) = 1/2. Taking the square root of both sides gives us cos(x) = ±√(1/2). The solutions occur when cos(x) is equal to ±√(1/2), which happens at x = (n + 1/2)π, where n is an integer.
c) To solve the quadratic equation 2sin^2(x) + 15sin(x) + 7 = 0, we can use the quadratic formula. Applying the formula, we get x = (-15 ± √(15^2 - 4(2)(7))) / (4). Simplifying further gives us the two solutions for x.
Using the Desmos graphing calculator or any other graphing tool can also help visualize and find the solutions to the equations by plotting the functions and identifying the points where they intersect the x-axis. This allows for a visual representation of the solutions.
Learn more about quadratic equation here:
https://brainly.com/question/30098550
#SPJ11
Bradley entered the following group of values into the TVM solver of his graphing calculator and N equals 36 I percent equals 0.8 PV equals PMT equals -350 FB equals 0P/Y equals 12 C/Y equals 12 PMT equals N which of these problems could he be trying to solve
The problem that Bradley could he be trying to solve is C. A person can afford a $350-per-month loan payment. If she is
being offered a 3-year loan with an APR of 0.8%, compounded monthly, what is the most money that she can borrow?
How to explain the informationFrom the information, Bradley entered the following group of values into the TVM Solver of his graphing calculator. N = 36; 1% = 0.8; PV =; PMT = -350; FV = 0; P/Y = 12; C/Y = 12; PMT:END.
Based on this, a person can afford a $350-per-month loan payment. If she is being offered a 3-year loan with an APR of 0.8%.
The correct option is C
Learn more about APR on
https://brainly.com/question/13593832
#SPJ1
Bradley entered the following group of values into the TVM Solver of his
graphing calculator. N = 36; 1% = 0.8; PV =; PMT = -350; FV = 0; P/Y = 12; C/Y
= 12; PMT:END. Which of these problems could he be trying to solve?
O
A. A person can afford a $350-per-month loan payment. If she is
being offered a 36-year loan with an APR of 9.6%, compounded
monthly, what is the most money that she can borrow?
O
B. A person can afford a $350-per-month loan payment. If she is
being offered a 3-year loan with an APR of 9.6%, compounded
monthly, what is the most money that she can borrow?
O
C. A person can afford a $350-per-month loan payment. If she is
being offered a 3-year loan with an APR of 0.8%, compounded
monthly, what is the most money that she can borrow?
D. A person can afford a $350-per-month loan payment. If she is
being offered a 36-year loan with an APR of 0.8%, compounded
The function() has domain - 6 Sis 2 and the average rate of change of cover the interval -6 5x5 2is - 3 (a) State the domain of the function(x) = f(x+9) The domain is . (b) Give the average rate of change of the function(x) = sex + 9) over its domain The average rate of change of 2) is i Rewritey - -/(x - 12) + 11 ay = /(B - 1+k and give values for A.B. h, and k. A=
The domain of the function f(x+9) is the set of all real numbers, denoted as (-∞, ∞). The average rate of change of the function f(x+9) over its domain is not provided in the given information.
The function y = -√(x - 12) + 11 can be rewritten as y = -√(x - (1 + k)) + 11, where A = -1, B = 1, h = 12, and k is unknown.
(a) When we shift a function horizontally by adding a constant to the input, it does not affect the domain of the function. Therefore, the domain of f(x+9) remains the same as the original function, which is the set of all real numbers, (-∞, ∞).
(b) The average rate of change of the function f(x+9) over its domain is not provided in the given information. It is necessary to know the specific function or additional information to calculate the average rate of change.
(c) The function y = -√(x - 12) + 11 can be rewritten as y = -√(x - (1 + k)) + 11, where A = -1 represents the reflection in the x-axis, B = 1 indicates a horizontal shift to the right by 1 unit, h = 12 represents a horizontal shift to the right by 12 units, and k is an unknown constant that represents an additional horizontal shift. The specific value of k is not given in the provided information, so it cannot be determined without further details.
Learn more about real numbers here:
https://brainly.com/question/31715634
#SPJ11
Pre-Test Active
2
3
567000
What is the factored form of 8x² + 12x?
4(4x² + 8x)
4x(2x + 3)
8x(x + 4)
8x(x² + 4)
10
Answer:
The factored form of 8x² + 12x is 4x(2x + 3).
Step-by-step explanation:
pls
neat handwriting
Find the area bounded by the graphs of the indicated equations over the given interval. Computer answers to three decimal places y - 6x-8;y 0 - 15x2 The area, calculated to three decimat pinces, in sq
The area bounded by the graphs of the equations [tex]$y = 6x - 8$[/tex] and [tex]$y = 15x^2$[/tex] over the interval [tex]$0 \leq x \leq 15$[/tex] is approximately 680.625 square units.
To find the area, we need to determine the points of intersection between the two curves. We set the two equations equal to each other and solve for x:
[tex]\[6x - 8 = 15x^2\][/tex]
This is a quadratic equation, so we rearrange it into standard form:
[tex]\[15x^2 - 6x + 8 = 0\][/tex]
We can solve this quadratic equation using the quadratic formula:
[tex]\[x = \frac{{-(-6) \pm \sqrt{{(-6)^2 - 4 \cdot 15 \cdot 8}}}}{{2 \cdot 15}}\][/tex]
Simplifying the equation gives us:
[tex]\[x = \frac{{6 \pm \sqrt{{36 - 480}}}}{{30}}\][/tex]
Since the discriminant is negative, there are no real solutions for x, which means the two curves do not intersect over the given interval. Therefore, the area bounded by the graphs is equal to zero.
To learn more about area refer:
https://brainly.com/question/25092270
#SPJ11
Find the function value, if possible. (If an answer is undefined, enter UNDEFINED.)
h(t) = -t^2 + t+1
(a) h(3)
(b)
h(-1)
(c)
h(x+1)
We are given the function h(t) = -t^2 + t + 1 and asked to find the function values for specific inputs. We need to evaluate h(3), h(-1), and h(x+1).
(a) h(3) = -5, (b) h(-1) = -1, (c) h(x+1) = -x^2.
(a) To find h(3), we substitute t = 3 into the function h(t):
h(3) = -(3)^2 + 3 + 1 = -9 + 3 + 1 = -5.
(b) To find h(-1), we substitute t = -1 into the function h(t):
h(-1) = -(-1)^2 + (-1) + 1 = -1 + (-1) + 1 = -1.
(c) To find h(x+1), we substitute t = x+1 into the function h(t):
h(x+1) = -(x+1)^2 + (x+1) + 1 = -(x^2 + 2x + 1) + x + 1 + 1 = -x^2 - x - 1 + x + 1 + 1 = -x^2.
Therefore, the function values are:
(a) h(3) = -5
(b) h(-1) = -1
(c) h(x+1) = -x^2.
To learn more about function click here : brainly.com/question/30721594
#SPJ11
Find the radius of convergence, R, of the series. 0 (-1)(x – 3) 2n + 1 n = 0 R = Find the interval, I, of convergence of the series. (Enter your answer using interval notation.) I = Find the radius of convergence, R, of the series. 00 4nxn n5 n = 1 R = Find the interval, I, of convergence of the series. (Enter your answer using interval notation.) I = Find the radius of convergence, R, of the series. 00 Σ Xn+4 2n! n = 2 R = Find the interval, I, of convergence of the series. (Enter your answer using interval notation.) I =
The solution to the given problem is as follows: Given series: $0 + (-1)(x-3)^{2n+1}$. The formula to calculate the radius of convergence is given by:$$R=\lim_{n \to \infty}\left|\frac{a_n}{a_{n+1}}\right|$$, Where $a_n$ represents the nth term of the given series.
Using this formula, we get;$$\begin{aligned}\lim_{n \to \infty}\left|\frac{a_n}{a_{n+1}}\right|&=\lim_{n \to \infty}\left|\frac{(-1)^n(x-3)^{2n+1}}{(-1)^{n+1}(x-3)^{2(n+1)+1}}\right|\\&=\lim_{n \to \infty}\left|\frac{(-1)^n(x-3)^{2n+1}}{(-1)^{n+1}(x-3)^{2n+3}}\right|\\&=\lim_{n \to \infty}\left|\frac{-1}{(x-3)^2}\right|\\&=\frac{1}{(x-3)^2}\end{aligned}$$.
Hence, the radius of convergence is $R=(x-3)^2$.
To find the interval of convergence, we check the endpoints of the interval for convergence. If the series converges for the endpoints, then the series converges on the entire interval.
Substituting $x=0$ in the given series, we get;$$0+(-1)(0-3)^{2n+1}=-3^{2n+1}$$This series alternates between $3^{2n+1}$ and $-3^{2n+1}$, which implies it diverges.
Substituting $x=6$ in the given series, we get;$$0+(-1)(6-3)^{2n+1}=-3^{2n+1}$$.
This series alternates between $3^{2n+1}$ and $-3^{2n+1}$, which implies it diverges.
Therefore, the interval of convergence is $I:(-\infty,0] \cup [6,\infty)$.
Learn more about radius of convergence here ;
https://brainly.com/question/31789859
#SPJ11
Twenty horses take part in the Kentucky Derby. (a) How many different ways can the first second, and third places be filled? (b) If there are exactly three grey horses in the race, what is the probability that all three top finishers are grey? Assume the race is totally random.
(a) There are 8,840 different ways to fill the first, second, and third places in the Kentucky Derby. (b) If there are exactly three grey horses in the race, the probability that all three top finishers are grey depends on the total number of grey horses in the race and the total number of horses overall.
(a) To calculate the number of different ways the first, second, and third places can be filled, we use the concept of permutations. Since each place can only be occupied by one horse, we have 20 choices for the first place, 19 choices for the second place (after one horse has already been placed in first), and 18 choices for the third place (after two horses have been placed).
Therefore, the total number of different ways is 20 × 19 × 18 = 8,840.
(b) To calculate the probability that all three top finishers are grey given that there are exactly three grey horses in the race, we need to know the total number of grey horses and the total number of horses overall. Let's assume there are a total of 3 grey horses and 20 horses overall (as mentioned earlier).
The probability that the first-place finisher is grey is 3/20 (since there are 3 grey horses out of 20).
After the first-place finisher is determined, there are 2 grey horses left out of 19 horses remaining for the second-place finisher, resulting in a probability of 2/19.
Similarly, for the third-place finisher, there is 1 grey horse left out of 18 horses remaining, resulting in a probability of 1/18.
To find the overall probability of all three top finishers being grey, we multiply these individual probabilities: (3/20) × (2/19) × (1/18) = 1/1140. Therefore, the probability is 1 in 1140.
Learn more about permutations here:
https://brainly.com/question/29990226
#SPJ11
In this problem, we'll discover why we always see quadratic functions for equations of motion. Near the surface of the earth, the acceleration due to gravity is almost constant - about 32 ft/sec^2. Velocity is an antiderivative of acceleartion. Determine the "general antiderivative" of the acceleartion function a(t) = −32. v(t) = [The variable is t, not x, and don't forget +C!] Now consider a chem student who shows up to chem lab without proper footwear. The chem prof, in a fit of rage, throws the student (or just their shoes) out of the lab window. Let's assume the prof threw the shoes straight up with a velocity of 20 ft/sec, meaning v(0) = 20. Find the exact formula for the velocity v(t) of the shoes at second t after they were thrown. [Hint: what do you need +C to be?] v(t) = For the velocity function you just found, write its general antiderivative here. s(t) = = The window where the shoes were thrown from is about 30 feet above the ground. Find the equation s(t) that describes the position (height) of the shoes. s(t) =
The general antiderivative of the acceleration function a(t) = -32 is given by integrating with respect to time:
v(t) = ∫(-32) dt = -32t + C
Given that v(0) = 20, we can substitute t = 0 and v(t) = 20 into the velocity equation and solve for C:
20 = -32(0) + C
C = 20
Thus, the exact formula for the velocity v(t) of the shoes at time t after they were thrown is:
v(t) = -32t + 20
To find the general antiderivative of v(t), we integrate the velocity function with respect to time:
s(t) = ∫(-32t + 20) dt = -16t² + 20t + C
Since the shoes were thrown from a window 30 feet above the ground, we set s(0) = 30 and solve for C:
30 = -16(0)² + 20(0) + C
C = 30
Therefore, the equation s(t) that describes the position (height) of the shoes is:
s(t) = -16t² + 20t + 30
To learn more about antiderivative visit:
brainly.com/question/31045111
#SPJ11
the price per square foot in dollars of prime space in a big
city from 2012 through 2015 is approximated by the function. R(t)=
-0.515t^3 + 2.657t^2 + 4.932t + 236.5 where t is measured in years,
with t=0 corresponding to 2012 c My foldcr Final Exam Spring 2022 - MTH evicw Shexct for Final 21F.pd A DETAILS MY NOTES ASK YOUR TEACHER The price per square foot In dollars of prime space In a big city from 2010 through 2015 Is approximated by the function R(t) = 0.515t3 + 2.657t2 + 4.932t + 236.5 (0 r 5) where t is measured in years, with t = corresponding to 2010. (a) When was the office space rent lowrest? Round your answer to two decimal places, If necessary. t= years after 2010 (b) what was the lowest office space rent during the period in question? Round your answer to two decimal places, if necessary dollars per square foot When was the office space rent highest? Round your answer to two decimal places, if necessary. t = years after 2010 (b) What was the highest office space rent during the period in question? Round your answer to two decinal places, if necessary. dollars per square foot Complete the following parts. (e) To arswer the above questions, we need the critical nurnbers of---Select--- v (f) These critical numbers In the interval (0, 5) are as follows. (Round your answer(s) to two decimol places, if necessary. Enter your answers as a comma separated list. If an answer does not exist, enter DNE.) DETAILS MY NOTES ASK YOUR TEACHER Type here to search 6F Cloudy 1:27 PM 5/19/2022
(a) The lowest office space rent occurs at t ≈ 0.856 years after 2010. Rounded to two decimal places, the answer is t ≈ 0.86 years after 2010.
What is Expression?
In mathematics, an expression is defined as a set of numbers, variables, and mathematical operations formed according to rules dependent on the context.
(b) The lowest office space rent during the period in question is approximately 235.03 dollars per square foot.
(C) The highest office space rent occurs at t ≈ 3.071 years after 2010. Rounded to two decimal places, the answer is t ≈ 3.07 years after 2010.
(d) The highest office space rent during the period in question is approximately 530.61 dollars per square foot.
(e) To answer the above questions, we need the critical numbers.
(f) The critical numbers in the interval (0, 5) are approximately 0.86 and 3.07.
(a) To find when the office space rent was lowest, we need to find the minimum value of the function R(t) =[tex]-0.515t^3[/tex] + [tex]2.657t^2[/tex] + 4.932t + 236.5 within the given interval [0, 5].
To determine the critical points, we take the derivative of R(t) with respect to t and set it equal to zero:
R'(t) =[tex]-1.545t^2[/tex] + 5.314t + 4.932 = 0
Solving this equation for t, we find the critical points. However, this equation is quadratic, so we can use the quadratic formula:
t = (-5.314 ± √([tex]5.314^2[/tex] - 4*(-1.545)(4.932))) / (2(-1.545))
Calculating this expression, we find two critical points:
t ≈ 0.856 and t ≈ 3.071
Since we are looking for the minimum within the interval [0, 5], we need to check the values of R(t) at the critical points and the endpoints of the interval.
[tex]R(0) = -0.515(0)^3 + 2.657(0)^2 + 4.932(0) + 236.5 = 236.5[/tex]
[tex]R(5) = -0.515(5)^3 + 2.657(5)^2 + 4.932(5) + 236.5 ≈ 523.89[/tex]
The lowest office space rent occurs at t ≈ 0.856 years after 2010. Rounded to two decimal places, the answer is t ≈ 0.86 years after 2010.
(b) To find the lowest office space rent during the period in question, we substitute the value of t ≈ 0.856 into the function R(t):
R(0.856) =[tex]-0.515(0.856)^3 + 2.657(0.856)^2 + 4.932(0.856)[/tex]+ 236.5 ≈ 235.03 dollars per square foot
The lowest office space rent during the period in question is approximately 235.03 dollars per square foot.
(c) To find when the office space rent was highest, we need to find the maximum value of the function R(t) within the given interval [0, 5].
Using the same process as before, we find the critical points to be t ≈ 0.856 and t ≈ 3.071.
Checking the values of R(t) at the critical points and endpoints:
R(0) = 236.5
R(5) ≈ 523.89
The highest office space rent occurs at t ≈ 3.071 years after 2010. Rounded to two decimal places, the answer is t ≈ 3.07 years after 2010.
(d) To find the highest office space rent during the period in question, we substitute the value of t ≈ 3.071 into the function R(t):
R(3.071) = [tex]-0.515(3.071)^3 + 2.657(3.071)^2 + 4.932(3.071) + 236.5 \approx 530.61[/tex]dollars per square foot
The highest office space rent during the period in question is approximately 530.61 dollars per square foot.
To learn more about square foot
https://brainly.com/question/10985264
#SPJ4
Determine the radius of convergence of the following power series. Then test the endpoints to determine the interval of convergence. Σ(5x)* The radius of convergence is R = Select the correct choice below and fill in the answer box to complete your choice. OA. The interval of convergence is (Simplify your answer. Type an exact answer. Type your answer in interval notation.) OB. The interval of convergence is {x: x= . (Simplify your answer. Type an exact answer.)
The correct answer is: OB) The interval of convergence is {x: -1 < x < 1} .
The ratio test states that if the limit of the absolute value of the ratio of consecutive terms in a power series is L, then the series converges if L < 1 and diverges if L > 1.
Let's apply the ratio test to the given power series:
a_n = 5x^n
a_{n+1} = 5x^{n+1}
Calculate the absolute value of the ratio of consecutive terms:
|a_{n+1}/a_n| = |5x^{n+1}/5x^n| = |x|
The limit of |x| as n approaches infinity depends on the value of x:
If |x| < 1, then the limit is 0.
If |x| > 1, then the limit is infinity.
If |x| = 1, then the limit is 1.
According to the ratio test, the series converges if |x| < 1 and diverges if |x| > 1. At |x| = 1, the ratio test is inconclusive.
Hence, the radius of convergence is R = 1, and the interval of convergence is (-1, 1) in interval notation.
To know more about ratio test refer here:
https://brainly.com/question/31700436#
#SPJ11
P P 1. APQR has T on QR so that PT is perpendicular to QR. The length of each of PQ, PT, PR, QT, and RT is an integer. (a) Suppose that PQ = 25 and PT = 24. Determine three possible areas for APQR. (b
Given the information that APQR is a quadrilateral with point T on QR such that PT is perpendicular to QR, and all sides (PQ, PT, PR, QT, and RT) have integer lengths
By applying the formula for the area of a triangle (Area = (1/2) * base * height), we can calculate the area of triangle APQR using different combinations of side lengths. Since the lengths are integers, we can consider different scenarios.
In the first scenario, let's assume that PR is the base of the triangle. Since PT is perpendicular to QR, it serves as the height. With PQ = 25 and PT = 24, we can calculate the area as (1/2) * 25 * 24 = 300. This is one possible area for triangle APQR. In the second scenario, let's consider QT as the base. Again, using PT as the height, we have (1/2) * QT * PT. Since the lengths are integers, there are limited possibilities. We can explore different combinations of QT and PT that result in integer values for the area.
Overall, by examining the given side lengths and applying the formula for the area of a triangle, we can determine multiple possible areas for triangle APQR.
Learn more about Triangles : brainly.com/question/2773823
#SPJ11
The tangent and velocity problems
I need help solving these 3 questions with steps please
line. 5. The deck of a bridge is suspended 275 feet above a river. If a pebble falls off the side of the bridge, the height, in feet, of the pebble above the water surface after t seconds is given by
The (a) Average velocity = (-255.84 feet)/(3.9 seconds) ≈ -65.6 feet/second and (b) The estimated instantaneous velocity of the pebble after 4 seconds is approximately -128 feet/second.
To find the average velocity of the pebble for a given time interval, we can use the formula:
Average velocity = (Change in displacement)/(Change in time)
In this case, the displacement of the pebble is given by the equation y = 275 - 16t^2, where y represents the height of the pebble above the water surface and t represents time.
(a) Average velocity for the time interval from t = 0.1 seconds to t = 4 seconds:
Displacement at t = 0.1 seconds:
[tex]y(0.1) = 275 - 16(0.1)^2 = 275 - 0.16 = 274.84 feet[/tex]
Displacement at t = 4 seconds:
[tex]y(4) = 275 - 16(4)^2 = 275 - 256 = 19 fee[/tex]t
Change in displacement = y(4) - y(0.1) = 19 - 274.84 = -255.84 feet
Change in time = 4 - 0.1 = 3.9 seconds
Average velocity = (-255.84 feet)/(3.9 seconds) ≈ -65.6 feet/second
(b) To estimate the instantaneous velocity of the pebble after 4 seconds, we can calculate the derivative of the displacement equation with respect to time.
[tex]y(t) = 275 - 16t^2[/tex]
Taking the derivative:
dy/dt = -32t
Substituting t = 4 seconds:
dy/dt at t = 4 seconds = -32(4) = -128 feet/second
Therefore, the estimated instantaneous velocity of the pebble after 4 seconds is approximately -128 feet/second.
To learn more about velocity from the given link
https://brainly.com/question/25749514
#SPJ4
Note: The correct question would be as
The deck of a bridge is suspended 275 feet above a river. If a pebble falls off the side of the bridge, the height, in feet, of the pebble above the water surface after t seconds is given by y 275 - 16t². = (a) Find the average velocity of the pebble for the time 4 and lasting period beginning when t = (i) 0.1 seconds (ii) 0.05 seconds (iii) 0.01 seconds (b) Estimate the instantaneous velocity of the pebble after 4 seconds.
Let D be the region bounded below by the cone z = √x² + y² and above by the sphere x2 + y2 + z2 = 25. Then the z-limits of integration to find the volume of D, using rectangular coordinates and ta
The z-limits of integration to find the volume of the region D, bounded below by the cone z = √(x² + y²) and above by the sphere x² + y² + z² = 25, using rectangular coordinates and integrating in the order dz dy dx, are -√(25 - x² - y²) ≤ z ≤ √(x² + y²).
To find the z-limits of integration, we need to determine the range of z-values that satisfy the given conditions. The cone equation, z = √(x² + y²), represents a cone that extends infinitely in the positive z-direction. The sphere equation, x² + y² + z² = 25, represents a sphere centered at the origin with radius 5.
The region D is bounded below by the cone and above by the sphere. This means that the z-values of D range from the cone's equation, which gives the lower bound, to the sphere's equation, which gives the upper bound. The lower bound is determined by the cone equation, z = √(x² + y²), and the upper bound is determined by the sphere equation, x² + y² + z² = 25.
By solving the sphere equation for z, we have z = √(25 - x² - y²). Therefore, the z-limits of integration in the order dz dy dx are -√(25 - x² - y²) ≤ z ≤ √(x² + y²). These limits ensure that we consider the region between the cone and the sphere when calculating the volume using rectangular coordinates and integrating in the specified order.
Learn more about cone here:
https://brainly.com/question/10670510
#SPJ11
Describe the interval(s) on which the function is continuous. (Enter your answer using interval notation.) x + 2 f(x) = √x [x>0 ((0,00)) Your answer cannot be understood or graded. More Information
To determine the intervals on which a function is continuous, we need to examine the individual components of the function and identify any restrictions or conditions. In this case, we have the function x + 2f(x) = √x.
The square root function (√x) is continuous for all non-negative values of x. Therefore, the square root of x is defined and continuous for x > 0.
Next, we have the function f(x) which is multiplied by 2 and added to x. As we don't have any specific information about f(x), we assume it to be a continuous function.
Since both the square root function (√x) and the unknown function f(x) are continuous, the sum of x, 2f(x), and √x will also be continuous for x > 0.
Hence, we conclude that the given function x + 2f(x) = √x is continuous on the interval (0, ∞). This means that the function is continuous for all positive values of x.
Learn more about intervals on which a function is continuous :
https://brainly.com/question/1111011
#SPJ11
3. Evaluate the flux F ascross the positively oriented (outward) surface S las . F:ds, S where F =< x3 +1, y3 + 2,23 +3 > and S is the boundary of x2 + y2 + x2 = 4,2 > 0. +
The flux of the vector field F is (128π/3).
To evaluate the flux of the vector field F = <x^3 + 1, y^3 + 2, 2z + 3> across the positively oriented (outward) surface S, we need to calculate the surface integral of F dot ds over the surface S.
The surface S is defined as the boundary of the region enclosed by the equation x^2 + y^2 + z^2 = 4, z > 0.
We can use the divergence theorem to relate the surface integral to the volume integral of the divergence of F over the region enclosed by S:
∬S F dot ds = ∭V div(F) dV
First, let's calculate the divergence of F:
div(F) = ∂(x^3 + 1)/∂x + ∂(y^3 + 2)/∂y + ∂(2z + 3)/∂z
= 3x^2 + 3y^2 + 2
Now, we need to find the volume V enclosed by the surface S. The given equation x^2 + y^2 + z^2 = 4 represents a sphere with radius 2 centered at the origin. Since we are only interested in the portion of the sphere above the xy-plane (z > 0), we consider the upper hemisphere.
To calculate the volume integral, we can use spherical coordinates. In spherical coordinates, the upper hemisphere can be described by the following bounds:
0 ≤ ρ ≤ 2
0 ≤ θ ≤ 2π
0 ≤ φ ≤ π/2
Now, we can set up the volume integral:
∭V div(F) dV = ∫∫∫ div(F) ρ^2 sin(φ) dρ dθ dφ
Substituting the expression for div(F):
∫∫∫ (3ρ^2 cos^2(φ) + 3ρ^2 sin^2(φ) + 2) ρ^2 sin(φ) dρ dθ dφ
= ∫∫∫ (3ρ^4 cos^2(φ) + 3ρ^4 sin^2(φ) + 2ρ^2 sin(φ)) dρ dθ dφ
Evaluating the innermost integral:
∫ (3ρ^4 cos^2(φ) + 3ρ^4 sin^2(φ) + 2ρ^2 sin(φ)) dρ
= ρ^5 cos^2(φ) + ρ^5 sin^2(φ) + (2/3)ρ^3 sin(φ)
Integrating this expression with respect to ρ over the bounds 0 to 2:
∫₀² ρ^5 cos^2(φ) + ρ^5 sin^2(φ) + (2/3)ρ^3 sin(φ) dρ
= 32 cos^2(φ) + 32 sin^2(φ) + (64/3) sin(φ)
Next, we evaluate the remaining θ and φ integrals:
∫₀^²π ∫₀^(π/2) 32 cos^2(φ) + 32 sin^2(φ) + (64/3) sin(φ) dφ dθ
= (64/3) ∫₀^²π ∫₀^(π/2) sin(φ) dφ dθ
Integrating sin(φ) with respect to φ:
(64/3) ∫₀^²π [-cos(φ)]₀^(π/2) dθ
= (64/3) ∫₀^²π (1 - 0) dθ
= (64/3) ∫₀^²π dθ
= (64/3) [θ]₀^(2π)
= (64/3) (2π - 0)
= (128π/3)
Therefore, the volume integral evaluates to (128π/3).
Finally, applying the divergence theorem:
∬S F dot ds = ∭V div(F) dV = (128π/3)
The flux of the vector field F across the surface S is (128π/3).
To learn more about flux, refer below:
https://brainly.com/question/15655691
#SPJ11
write the following system as a matrix equation involving the product of a matrix and a vector on the left side and a vector on the right side. 2x1 x2 - 5x3
The given system, 2x1 + x2 - 5x3, can be written as a matrix equation by representing the coefficients of the variables as a matrix and the variables themselves as a vector on the left side, and the result of the equation on the right side.
In a matrix equation, the coefficients of the variables are represented as a matrix, and the variables themselves are represented as a vector. The product of the matrix and the vector represents the left side of the equation, and the result of the equation is represented by a vector on the right side.
For the given system, we can write it as:
⎡2 1 -5⎤ ⎡x1⎤ ⎡ ⎤
⎢ ⎥ ⎢ ⎥ = ⎢ ⎥
⎢ ⎥ ⎢x2⎥ ⎢ ⎥
⎢ ⎥ ⎢ ⎥ ⎢ ⎥
⎣ ⎦ ⎣x3⎦ ⎣ ⎦
Here, the matrix on the left side represents the coefficients of the variables, and the vector represents the variables x1, x2, and x3. The result of the equation, which is on the right side, is represented by an empty vector.
This matrix equation allows us to represent the given system in a compact and convenient form for further analysis or solving.
Learn more about matrix here:
https://brainly.com/question/29132693
#SPJ11
please explain how to do this problem and the steps involved
Find the limits, if they exist, or type DNE for any which do not exist. 2x2 lim (x,y)+(0,0) 4x2 + 4y? 1) Along the x-axis: 2) Along the y-axis: 3) Along the line y = mx : = 4) The limit is:
The limit of the function 2x² + 4y as (x, y) approaches (0, 0) is 0.
Determine the limits?To find the limits along different paths, we substitute the values of x and y in the given function and see what happens as we approach (0, 0).
1) Along the x-axis (y = 0):
Substituting y = 0 into the function gives us 2x² + 4(0) = 2x². As x approaches 0, the value of 2x² also approaches 0. Therefore, the limit along the x-axis is 0.
2) Along the y-axis (x = 0):
Substituting x = 0 into the function gives us 2(0)² + 4y = 4y. As y approaches 0, the value of 4y also approaches 0. Hence, the limit along the y-axis is 0.
3) Along the line y = mx:
Substituting y = mx into the function gives us 2x² + 4(mx) = 2x² + 4mx. As (x, mx) approaches (0, 0), the value of 2x² + 4mx approaches 0. Thus, the limit along the line y = mx is 0.
4) The overall limit:
Since the limit along the x-axis, y-axis, and the line y = mx all converge to 0, we can conclude that the overall limit of the function 2x² + 4y as (x, y) approaches (0, 0) is 0.
To know more about limits, refer here:
https://brainly.com/question/12383180#
#SPJ4
9. Compute the distance between the point (-2,8,1) and the line of intersection between the two planes having equations x+y+z = 3 and 5x + 2y + 3z - 8. (5 marks)
The distance between the point (-2, 8, 1) and the line of intersection between the planes x + y + z = 3 and 5x + 2y + 3z - 8 = 0 is √7/3.
To find the distance between the point and the line of intersection, we can first determine a point on the line. Since the line lies on the intersection of the two given planes, we need to find the point where these planes intersect.
By solving the system of equations formed by the planes, we find that the intersection point is (1, 1, 1).
Next, we can consider a vector from the given point (-2, 8, 1) to the point of intersection (1, 1, 1), which is given by the vector v = (1 - (-2), 1 - 8, 1 - 1) = (3, -7, 0).
To calculate the distance, we need to find the projection of vector v onto the direction vector of the line, which can be determined by taking the cross product of the normal vectors of the two planes. The direction vector of the line is given by the cross product of (1, 1, 1) and (5, 2, 3), which yields the vector d = (-1, 2, -3).
The distance between the point and the line can be calculated using the formula: distance = |v · d| / ||d||, where · represents the dot product and || || represents the magnitude.
Plugging in the values, we obtain the distance as |(3, -7, 0) · (-1, 2, -3)| / ||(-1, 2, -3)|| = |12| / √14 = √7/3.
Learn more about line of intersection:
https://brainly.com/question/11297403
#SPJ11
Which of the following measurements for triangle ABC will result in no solution and which will result in two solutions for angle B? Justify your answer. Triangle 1: A = 25°, a = 14 m, b = 18 m Tri
In triangle ABC, we are given the measures of angles A and B, as well as the lengths of sides a, b, and c. We need to determine which measurements will result in no solution and which will result in two solutions for angle B.
In a triangle, the sum of the measures of the three angles is always 180 degrees. Let's analyze each triangle individually:
Triangle 1: We are given A = 25°, a = 14 m, and b = 18 m. To determine if there is a unique solution for angle B, we can use the sine rule: a/sin(A) = b/sin(B). Substituting the given values, we have 14/sin(25°) = 18/sin(B). Solving for sin(B), we get sin(B) = (18*sin(25°))/14. Since sin(B) cannot exceed 1, if the calculated value is greater than 1, there will be no solution for angle B. If it is less than or equal to 1, there will be two possible solutions.
To determine if there are any measurements that will result in no solution or two solutions for angle B, we need to consider situations where the calculated value of sin(B) is greater than 1. If this occurs, it means that the given lengths of sides a and b are not suitable for creating a triangle with angle A = 25°. However, without the measurements of side c or additional information, we cannot definitively determine if there are any such cases.
To learn more about triangle: -brainly.com/question/29083884#SPJ11
PLEASE HELP I WILL GIVE 100 POINTS AND BRAINLIEST AND I'LL TRY TO ANSWER SOME OF YOUR QUESTIONS!!!!!
Three shipping companies want to compare the mean numbers of deliveries their drivers complete in a day.
The first two shipping companies provided their data from a sample of drivers in a table.
Company C showed its data in a dot plot.
Answer the questions to compare the mean number of deliveries for the three companies.
1. How many drivers did company C use in its sample?
2. What is the MAD for company C's data? Show your work.
3. Which company had the greatest mean number of deliveries?
4. Compare the means for companies A and B. By how many times the MAD do their means differ? Show your work.
Answer:
1. the company C used 10 drivers2. 6 + 7 + 8 + 9 + 10 + 10 + 10 + 12 + 14 + 14 = 100/10. The Mean = 10 (6- 10) + (7- 10) + (8- 10) + (9- 10) + (10- 10) + (10- 10) + (10- 10) + (12- 10) + (14- 10)4 + 3 + 2 + 1 + 0 + 0 + 0 + 2 + 4 = 16/10 = 1 6/103. The groups that had the most deliveries where group A and B4. So if there are 6 deliveries of group A and 14 deliveries from group B i think the MAD would be 4
Step-by-step explanation: