Answer:
The bonds can shift because valence electrons are held loosely and move freely.
Explanation:
Ill put the rest of the answers in the comments
Answer:
The bonds can shift because valence electrons are held loosely and more freely.
Mass is measured in
a) Litters
b) Centimeter
c) Newton
d) Kilogram
Answer:
d) Kilogram.
Hope it helps youMass is measured in
a) Litters
b) Centimeter
c) Newton
d) Kilogram
Ice has a density of 0.92 g/cm°; gasoline has a density of 0.68 g/cms. Will ice float in gasoline? Why or why
not?
Answer:
No,ice will not float
Explanation:
A substance sinks in another if it has a greater density than the other substance. The density of ice is clearly greater here and so ice will sink
A student conducts an experiment to determine how the amount of water given to a plant affects its growth.
What is the dependent variable for this experiment?
a. the amount of water
b. the height of the plant
C. the amount of sunlight
d. the amount of soil
Answer:
Option A because the researcher can change the amount of water given to the plant to determine the dependent factor, how much the plant grows. Options C and D are both control variables that need to stay the same in order to perform this experiment correctly.
Is energy conserved during a fission/fusion reaction?
Answer:
No,but it can be changed into other forms.
Colulate the wavelength of i)a ball moving of 40m/s i i)A proton moving at 40 ms i i i) An election moving at 40m/s
Explanation:
[tex]thank \: you[/tex]
In the past, most children who went sledding in the winter snow in Verland used wooden sleds with runners and steering bars. Ten years ago, smooth plastic sleds became popular; they go faster than wooden sleds but are harder to steer and slow. The concern that plastic sleds are more dangerous is clearly borne out by the fact that the number of children injured while sledding was much higher last winter than it was ten years ago.
Which of the following, if true in Verland, most seriously undermines the force of the evidence cited?
(A) A few children still use traditional wooden sleds.
(B) Very few children wear any kind of protective gear, such as helmets, while sledding.
(C) Plastic sleds can be used in a much wider variety of snow conditions than wooden sleds can.
(D) Most sledding injuries occur when a sled collides with a tree, a rock, or another sled.
(E) Because the traditional wooden sled can carry more than one rider, an accident involving a wooden sled can result in several children being injured.
Answer:
(E) it seems like the best option
What is concentration gradient?
Answer:
The difference in the concentration of a substance between two areas is called the concentration gradient . The bigger the difference, the steeper the concentration gradient and the faster the molecules of a substance will diffuse. The direction of diffusion is said to be 'down' or 'with' the concentration gradient.
Explanation:
A car accelerates by 4 m/s^2 and travels for 2.5 mins with an initial velocity of 20m/s. Find the final velocity.
Answer:
540m/s
Explanation:
v= u + at
u change t to seconds
What does v or vf stand for? What SI units are used to measure it?
Answer:
Ventricular Fibrillation
Explanation:
it is measured bpm ( beats per minute ) of the cardiac muscles of the heart in a poor / disorderly working condition.
Answer:
velocity and final velocity (m/s)
Explanation:
can you convert liters to kilometers explain ur answer plsss
Answer:
Yes we can.
Explanation:
1 Litre= 0.001km
1000 Litre= 1km
a sound intensity of 70 dB is observed a distance of d from the source of sound. what sound intensity would be observed at a distance 2d from the source
Answer:
Correct option is
B
16dB
Sound level at A is ⊥o⊥B
If the intensity of sound at A 4 cm away from the source is I
A
then.
⊥o=10log
I
o
I
A
Where I
o
=10
−12
w m
−2
⇒⊥=log
10
−12
I
A
⇒
10
−12
I
A
=10
⇒I
A
=10
−11
wm
−2
If the source (s) is emmitting the sound energy of power P
I
A
=
4×(4)
2
P
⇒P=10
−11
×64π w
⇒ Intensity of sound (I
B
) ar point B,2 m
I
B
=
4π(2)
2
P
I
B
=
16π
64π×10
−11
10 m
−2
⇒I
B
=4×10
−11
wm
−2
⇒ Sound level at 2m=10log(
I
I
B )
=10log(10 −12
4×10 −11)
=10log40
=16.02
Hence Sound level at 2m from sourceis 16 dB
SCIENCE
A student wants to try to convince her parents to stop serving peas for dinner. She lays out her argument that peas are high in fructose, which is a type of sugar. Which test could she use to provide scientific evidence to support her argument that peas are high in fructose?(1 point)
brown paper bag test
vinegar test
Benedict’s test
iodine test
Answer:Benedict’s Test
Explanation:
The student will use Benedict's test to support her argument.
The common reagents for testing carbohydrates are iodine and Benedicts test.
While iodine gives a positive result with starch, it doesn't react with fructose.
Benedict's reagent is used to determine the presence of reducing sugar in a given solution.
A positive test with Benedict's reagent is determined by a color change from clear blue to brick-red with a precipitate.
A reaction between fructose and Benedict's solution gives a positive test from the color change which occurs when the fructose is reduced to simple sugar such as glucose and mannose.
Thus, the student will use Benedict's test to support her argument.
Learn more here:https://brainly.com/question/13397926
pls help question are in the picture
need help asap!! thank you in advance, will mark brainliest!!
Answer:
Wanna be my friend?
Explanation:
maize is called monocot why?
Answer:
Rice, wheat, maize all have one cotyledon in their seed, so they are monocots. Explanation: The monocot plants have a single cotyledon. They have a fibrous root system, leaves in monocots have parallel venation.
Explanation:
the power of a bulb is 100 watt .what does it mean
Answer:
Explanation: 100 watts is a unit of power.
A watt is also the amount of energy being consumed. So the more watts the brighter the light bulb is lit.
Difference between Work against gravity and Work done against friction?
Answer:
if there is not motion produced in body, the works become zero. We can do work against gravity or against friction. when we lift something then it is work done against gravity and when we slide something then it is work done against friction.
I hope u like it pls follow me
Two representative elements are in the same period of the periodic table. Which statement correctly describes the atoms of the two elements?(1 point)
They have the same number of valence electrons.
They have the same number of valence electrons.
They have valence electrons in different energy levels.
They have valence electrons in different energy levels.
They have valence electrons in the same energy level.
They have valence electrons in the same energy level.
They have the same number of electrons.Helium is in group 18 of the periodic table. How is helium different from the other elements in this group?(1 point)Helium atoms have valence electrons in the first energy level, while atoms of the other elements in the group have valence electrons in the second energy level.
Helium atoms have valence electrons in the first energy level, while atoms of the other elements in the group have valence electrons in the second energy level.
Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
Helium atoms have a full outer energy level, while atoms of the other elements in the group do not have a full outer energy level.
Helium atoms have a full outer energy level, while atoms of the other elements in the group do not have a full outer energy level.
Helium atoms have 2 electrons, while atoms of the other elements in the group all have 18 electrons.
Use the periodic table to answer the question.
Which element has atoms with valence electrons in a higher energy level than those of calcium (Ca)?
lithium (Li)
lithium (Li)
cesium (Cs)
bromine (Br)
oxygen (O)
Use the periodic table to answer the question.
Which statement best describes the arrangement of electrons in an atom of fluorine (F)?
There are seven electrons in the first energy level and two electrons in the second energy level.
There are seven electrons in the first energy level and two electrons in the second energy level.
There are five electrons in the first energy level and two electrons in the second energy level.
There are five electrons in the first energy level and two electrons in the second energy level.
There are two electrons in the first energy level and seven electrons in the second energy level.
There are two electrons in the first energy level and seven electrons in the second energy level.
There are two electrons in the first energy level and five electrons in the second energy level.
1) They have valence electrons in the same energy level.
2) Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
3) cesium (Cs)
4) There are two electrons in the first energy level and seven electrons in the second energy level.
In the periodic table, elements are arranged in order of increasing atomic number into groups and periods.
In the periodic table, we have an arrangement of atoms based on their respective groups and periods.
If I pick two representative elements in the same period, their number of valence electrons will differ by 1 but they will all be accommodated in the same energy level.
Helium is the first member of group 18. Unlike the other members of the group, its first shell is also its valence shell. It has two and not eight valence electrons like other members of the group.
The electronic configuration of Ca is [Ar] 4s², that of Li is [He] 2s1, that of Cs is [Xe] 6s1, that of Br is [Ar] 4s² 3d¹⁰ 4p⁵ and that of oxygen is [He] 2s² 2p⁴.
We can see that only Cs has valence electrons in higher energy orbitals than those of Ca.
Lastly, Fluorine is in group 17. There are nine electrons in this atoms. They arranged in such a way that there are two electrons in the first shell and seven electrons in the second shell.
Learn more:https://brainly.com/question/24384700
plz hep me tell ans of this only
We have no idea what force the object might exert until it hits something.
In order to accelerate 70 kg at the rate of 20 m/s^2, YOU or some machine has to PUSH it with a force of (F=m•a) 1,400 Newtons. If you stop pushing it, it stops accelerating.
A stone of mass 600g is thrown vertically upwards. calculate the value of the gravitational force on the stone at its highest point. take g = 10N/kg
Answer:
6N
Explanation:
F = m × g
= 0.6 × 10
= 6N
to find the force you first have to convert the mass to kg by dividing 600 by 1000 giving you 0.6
then you can multiply the mass times the gravity giving you a gravitational force of 6N
Lilly drove her car east for a total of 6 hours at a constant velocity. In one-third of that time, she drove 160 kilometers. What was her velocity?
Write your answer as a whole number.
Hey mate there is a same question answered by me correctly .Visit the link below for your answer
https://brainly.com/question/24502753?
Answer: 160 km
Explanation:
Fluorescent lamp of 25W gives more light than the filament lamp of 50W. Why?
Answer:
Fluorescent lamp releases more light energy.
Explanation:
This is so because the fluorescent lamp releases more light energy and less heat energy than that of a filament lamp with the same rating.
Fluorescent lamp releases more light energy than that of filament lamp and also less heat energy than that of a filament lamp.
What is Power of fluorescent lamp and filament lamp?The filament and the fluorescent lamps are two different types of most commonly used light lamps. The filament lamps are the lamps which work on the phenomenon of incandescent whereas a high resistance filament is heated up in the lamp until it radiates visible light energy. Whereas, a fluorescent lamp is the lamp which works by ionizing a gas that emits photons or energy particles.
The fluorescent lamp releases more light energy and less heat energy than that of a typical filament lamp with the less power of 25W than 50W.
Learn more about Fluorescent lamp here:
https://brainly.com/question/1363894
#SPJ2
show with the help of an experiment that the acceleration of a freely falling body doesn't depend on the mass of that body. pls answer this question:)
Answer:
Experiment
Materials needed
Stop watch, a small stone, a big stone, a balance.
Procedure
Measure the mass of the two stones.
Hold the two stones about 5m above the ground level.
Drop the stones simultaneously.
Record the time taken for the stones to strike the ground.
Repeat the procedure with different masses of objects at the same height.
Observation, it will be observed that, all the objects dropped from the same height strike the ground at the same time interval.
Conclusion; a falling object doesn't depend on mass
Explanation:
½mv²=mgh
g=½(V²/h)
When an object is held at a height, it posses gravitational potential energy which is mgh, where m= mass, h=height, g=acceleration due gravity
When the object is dropped, the potential energy will be converted to kinetic energy which is ½mv², where V=velocity at which the object moves.
V=∆h/t, ∆h is change in height with respect to time.
½mv²=mgh
Mass cancel out,
g=v²/2h
This implies that g does not depend or is not affected by mass. Hence heavy object and light object will reach the ground at the same time when dropped from the same height. When air resistance is negligible.
When a wave moves from one medium into another at an angle other than 90o the wave will change direction and continue to follow a new straight-line path. This is known as and is responsible for the of white light into its component colors when it passes through a prism.
Answer:
Mono-chromatic, Poly-chromatic. When a wave moves from one medium into another at an angle other than 90 degrees the wave will change direction and continue to follow a new straight-line path
Thank you
Calculate the electrical energy transferred by a 60W electric bulb that is turned on for 20s and 5minutes.
Answer:
approximately 0.00504 kWh
Explanation:
This electrical energy and is measured in kWh.
For 5 minutes and 20 seconds of use, it is 0.06 W x 0.084 h = 0.00504 kWh.
Note: 60W = 0.06kW; 5min 20sec = 0.083(8) ≈ 0.084 hour
-. JC=BFF© cough medicine is marketing its' new medicine called "Devil Red". They
want to know why religious customers seem to avoid their product.
Religious customers seem to avoid their products because;
they have a negative view and understanding of the name "Devil."When selling a product to potential customers, the brand name of that product could affect sales negatively or positively.
Religious people do not view the devil in a positive manner because they believe that he is responsible for the suffering in the world.
The already existing bias they have in their minds about that name will make them reject any product bearing the name. They might even reason that this medicine will worsen their sickness. For this reason, the medicine called "Devil Red" will have a poor reception by religious people.
Summarily, religious people avid the medicine called Devil Red because they have a negative view of the devil.
Learn more about brand names here:
https://brainly.com/question/15682332
How are the oscillating magnetic and electric fields of an electromagnetic wave positioned relative to each other?
Answer:
Electromagnetic waves consist of both electric and magnetic field waves. These waves oscillate in perpendicular planes with respect to each other, and are in phase. The creation of all electromagnetic waves begins with an oscillating charged particle, which creates oscillating electric and magnetic fields.
Explanation:
1. Alice decides to measure the density of the banana.
a)What equipment will she need to measure it?
b)Explain how she could use that equipment to measure the density.
Answer:
A) Measuring cup with water and a scale
Explanation:
Fill the measuring cup with water to a certain point, and record the current height of the water. After placing the banana fully into the water, record the new height of the water. Subtract the old height from the new height. Now you have the banana's volume.
Then, place the banana on a scale to get it's mass.
Perform [tex]\rho ={\frac {m}{V}}[/tex], where p = density, m = mass, v = volume.
Note: 1 milliliter = 1 centimeter^3
A still object has a mass of 25kg, what would be the Weight? What would be the Normal Force?
[tex]\\ \rm\longmapsto Force=Mass(Acceleration)[/tex]
[tex]\\ \rm\longmapsto Force=25(10)[/tex]
[tex]\\ \rm\longmapsto Force=250N[/tex]
what is the atomic mass of oxygen?
Answer:
[tex]atomic \: mass \: of \: oxygen = 15.99aproximtly = 16 \\ thank \: you[/tex]
Answer:
The atomic mass of oxygen is 15.999 u.