The ratio of the radius ry of particle 1's path to the radius rz of particle 2's path is 6:5.
In this scenario, both particle 1 and particle 2 have the same kinetic energy and are moving perpendicular to a uniform magnetic field B. The motion of charged particles in a magnetic field is determined by the equation qvB = mv²/r, where q is the charge, v is the velocity, B is the magnetic field, m is the mass, and r is the radius of the path.
Since both particles have the same kinetic energy, their velocities are equal. Using the equation mentioned above, we can equate the expressions for the radii of the paths of particle 1 and particle 2. Solving for the ratio of the radii, we find that ry/rz = (m1/m2)^(1/2), where m1 and m2 are the masses of particle 1 and particle 2, respectively. Plugging in the given masses, we get ry/rz = (6.0/5.0)^(1/2) = 6/5. Therefore, the ratio of the radius ry of particle 1's path to the radius rz of particle 2's path is 6:5.
To learn more about kinetic energy, click here:
brainly.com/question/999862
#SPJ11
Suppose that 14,636.18J is added to a container of water that has a mass of 123.27g. If the final temperature of the water after the heat has been transferred is 85.23°C, what was the initial temperature of the water in °C?
The initial temperature of the water was approximately 56.905°C
To solve this problem, we can use the heat transfer equation:
Q = mcΔT
Where:
Q is the heat added to the water,
m is the mass of the water,
c is the specific heat capacity of water, and
ΔT is the change in temperature.
Given:
Q = 14,636.18 J
m = 123.27 g = 0.12327 kg
c (specific heat capacity of water) ≈ 4.184 J/(g·°C) (approximately)
We can rearrange the equation to solve for ΔT:
ΔT = Q / (mc)
Substituting the values:
ΔT = 14,636.18 J / (0.12327 kg × 4.184 J/(g·°C))
ΔT ≈ 28.325 °C
To find the initial temperature, we subtract the change in temperature from the final temperature:
Initial temperature = Final temperature - ΔT
Initial temperature = 85.23°C - 28.325°C
Initial temperature ≈ 56.905°C
Therefore, the initial temperature of the water was approximately 56.905°C.
Learn more about heat transfer from the given link :
https://brainly.com/question/16055406
#SPJ11
1. (1 p) An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. Determine the speed and mass of the object.
An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. The speed and mass of the object is 1.136 m/s and 22 kg respectively.
To determine the speed and mass of the object, we can use the formulas for kinetic energy and linear momentum.
Kinetic Energy (KE) = (1/2) × mass (m) × velocity squared (v²)
Linear Momentum (p) = mass (m) × velocity (v)
Kinetic Energy (KE) = 275 J
Linear Momentum (p) = 25 kg m/s
From the equation for kinetic energy, we can solve for velocity (v):
KE = (1/2) × m × v²
2 × KE = m × v²
2 × 275 J = m × v²
550 J = m × v²
From the equation for linear momentum, we have:
p = m × v
v = p / m
Plugging in the given values of linear momentum and kinetic energy, we have:
25 kg m/s = m × v
25 kg m/s = m × (550 J / m)
m = 550 J / 25 kg m/s
m = 22 kg
Now that we have the mass, we can substitute it back into the equation for velocity:
v = p / m
v = 25 kg m/s / 22 kg
v = 1.136 m/s
Therefore, the speed of the object is approximately 1.136 m/s, and the mass of the object is 22 kg.
To know more about kinetic energy here
https://brainly.com/question/999862
#SPJ4
An engineer working in an electronics lab connects parallel-plate capacitor to a battery, so that the potential difference between the plates is 255 V: Assume a plate separation of d = 1.40 cm and plate area of A = 25.0 cm2 , When the battery is removed, the capacitor is plunged into container of distilled water: Assume distilled water is an insulator with dielectric constant of 80.0_ (a) Calculate the charge on the plates (in pC) before and after the capacitor is submerged. (Enter the magnitudes:) before Q; pC after pC (b) Determine the capacitance (in F) and potential difference (in V) after immersion. Cf AVf (c) Determine the change in energy (in nJ) of the capacitor AU = n] (d) What If? Repeat parts (a) through (c) of the problem in the case that the capacitor is immersed in distilled water while still connected to the 255 V potential difference: Calculate the charge on the plates (in pC) before and after the capacitor is submerged. (Enter the magnitudes:) before Q; PC after pC Determine the capacitance (in F) and potential difference (in V) after immersion: Cf AVf Determine the change in energy (in nJ) of the capacitor AU
The charge on the plates after immersion is also approximately 3.19 μC. The capacitance after immersion is still approximately 1.25 x 10^-8 F. The change in energy of the capacitor after immersion is approximately -1.63 x 10^-5 joules (J).
(a) Before immersion, the charge on the plates can be calculated using the formula for the capacitance of a parallel-plate capacitor:
Q = C * V
where Q is the charge, C is the capacitance, and V is the potential difference.
The capacitance of a parallel-plate capacitor is given by:
C = (ε₀ * εᵣ * A) / d
where ε₀ is the vacuum permittivity (ε₀ ≈ 8.85 x 10^-12 F/m), εᵣ is the relative permittivity (dielectric constant) of the medium (εᵣ = 80.0), A is the plate area, and d is the plate separation.
Substituting the given values:
A = 25.0 cm² = 25.0 x 10^-4 m²
d = 1.40 cm = 1.40 x 10^-2 m
V = 255 V
ε₀ = 8.85 x 10^-12 F/m
εᵣ = 80.0
We can calculate the capacitance:
C = (8.85 x 10^-12 F/m * 80.0 * 25.0 x 10^-4 m²) / (1.40 x 10^-2 m)
C ≈ 1.25 x 10^-8 F
To calculate the charge on the plates before immersion:
Q = C * V = (1.25 x 10^-8 F) * (255 V)
Q ≈ 3.19 x 10^-6 C
The charge on the plates before immersion is approximately 3.19 micro coulombs (μC).
After immersion, the charge on the plates remains the same because the battery is disconnected. Therefore, the charge on the plates after immersion is also approximately 3.19 μC.
(b) After immersion, the capacitance of the capacitor remains the same because the dielectric constant of distilled water is used only when the capacitor is connected to the potential difference.
Therefore, the capacitance after immersion is still approximately 1.25 x 10^-8 F.
The potential difference across the plates after immersion is 0 V because the battery is disconnected. Thus, the potential difference after immersion is 0 V.
(c) The change in energy of the capacitor can be calculated using the formula:
ΔU = (1/2) * C * (Vf^2 - Vi^2)
where ΔU is the change in energy, C is the capacitance, Vf is the final potential difference, and Vi is the initial potential difference.
Since the potential difference after immersion is 0 V, the change in energy is:
ΔU = (1/2) * (1.25 x 10^-8 F) * (0 - (255 V)^2)
ΔU ≈ -1.63 x 10^-5 J
The change in energy of the capacitor after immersion is approximately -1.63 x 10^-5 joules (J).
(d) In this case, since the capacitor is still connected to the 255 V potential difference, the potential difference remains the same before and after immersion.
The charge on the plates before immersion is still approximately 3.19 μC, as calculated in part (a).
The capacitance after immersion remains the same as well, approximately 1.25 x 10^-8 F, as calculated in part (b).
Therefore, the charge on the plates after immersion is also approximately 3.19 μC, and the potential difference across the plates remains at 255 V.
The change in energy of the capacitor after immersion is 0.
To learn more about capacitance click here
https://brainly.com/question/33253666
#SPJ11
A horizontal spring has a spring constant of 39.5 N/m. A mass of 400. g is attached to the spring and displaced 5.50 cm. The mass is then released.
Find
(a) the total energy of the system,
(b) the maximum velocity of the system
(c) the potential energy and kinetic energy for x = 4.00 cm.
Can you please show me how you get this and the equations used. Thank you!
The total energy of the system in the spring-mass problem is 0.10 J, with a maximum velocity of 0.775 m/s. For a displacement of 4.00 cm, both the potential energy and kinetic energy are 0.0316 J. These values are calculated using the equations for potential energy and kinetic energy in a spring-mass system.
To solve this problem, we can use the concepts of potential energy and kinetic energy in a spring-mass system.
(a) The total energy of the system is the sum of the potential energy (PE) and the kinetic energy (KE).
The potential energy (PE) of a spring is given by the equation:
PE = (1/2) kx²
where k is the spring constant and x is the displacement from the equilibrium position.
Substituting the given values, we have:
PE = (1/2) × 39.5 N/m × (0.0550 m)²
= 0.05 J
The kinetic energy (KE) is given by:
KE = (1/2) mv²
where m is the mass and v is the velocity.
Since the mass is released from rest, the maximum potential energy is converted to maximum kinetic energy, so at maximum displacement, all the potential energy is converted to kinetic energy.
Therefore, the total energy (TE) is the sum of the potential energy and kinetic energy:
TE = PE + KE
= PE + PE (at maximum displacement)
= 2 × PE
= 2 × 0.05 J
= 0.10 J
So, the total energy of the system is 0.10 J.
(b) The maximum velocity of the system can be found by equating the kinetic energy to the potential energy:
KE = PE
(1/2) mvₘₐₓ² = (1/2) kx²
Solving for vₘₐₓ, we have:
vₘₐₓ = √((k/m) × x²)
= √((39.5 N/m) / (0.400 kg) × (0.0550 m)²)
= 0.775 m/s
Therefore, the maximum velocity of the system is 0.775 m/s.
(c) For x = 4.00 cm, we can calculate the potential energy (PE) and kinetic energy (KE) using the same equations as before.
PE = (1/2) kx²
= (1/2) × 39.5 N/m × (0.0400 m)²
= 0.0316 J
Since the system is at maximum displacement, all the potential energy is converted to kinetic energy, so the kinetic energy is equal to the potential energy:
KE = PE = 0.0316 J
Therefore, the potential energy and kinetic energy for x = 4.00 cm are both 0.0316 J.
The equations used are based on the principles of potential energy and kinetic energy in a spring-mass system, where potential energy is stored in the spring due to its displacement from the equilibrium position, and kinetic energy is related to the motion of the mass.
To know more about potential energy refer to-
https://brainly.com/question/24284560
#SPJ11
An aircraft accelerates down the runway before leaving the ground. Air resistance cannot be neglected. Y Part A Identify the forces acting on the aircraft. Check all that apply. A. Thrust B. Tension T C. Drag D D. Spring force e. Weight w F. Normal force
An aircraft accelerates down the runway before leaving the ground. Air resistance cannot be neglected.The forces acting on the aircraft are thrust,drag,weight and normal force.So option A,C,E and F are correct.
In the scenario where air resistance cannot be neglected, the forces acting on the aircraft during its acceleration down the runway are:
A. Thrust - This force is generated by the engines of the aircraft, pushing it forward.
C. Drag - This force opposes the motion of the aircraft and is caused by air resistance. It acts in the opposite direction to the aircraft's velocity.
E. Weight (w) - This force is the gravitational force acting on the aircraft due to its mass. It acts vertically downward towards the center of the Earth.
F. Normal force - This force is exerted by the ground on the aircraft and acts perpendicular to the surface of contact (upward in this case).
Therefore option A,C,E and F are correct.
To learn more about acceleration visit: https://brainly.com/question/460763
#SPJ11
Verify that a 2.3 x 1017kg mass of water at normal density would make a cube 61 km on a side. (This mass at nuclear density would make a cube 1.0 m on a side. Submit a file with a maximum size of 1 MB
To verify the given information, let's calculate the volume of water represented by a mass of 2.3 x 10^17 kg at normal density and check if it would form a cube with a side length of 61 km.
Density of water at normal conditions is approximately 1000 kg/m³.
Volume = Mass / Density
Volume = (2.3 x 10^17 kg) / (1000 kg/m³)
Volume = 2.3 x 10^14 m³
Side length = ∛Volume
Side length = ∛(2.3 x 10^14 m³)
Side length ≈ 611.6 km
Therefore, the calculated side length is approximately 611.6 km, which is close to the given value of 61 km. It seems there might be an error in the given information, as the side length would be much larger than stated.
Learn more about density here : brainly.com/question/29775886
#SPJ11
The following three questions relate to the following information: The fundamental frequency of a string 2.40 m long, fixed at both ends, is 22.5 Hz.
What is the wavelength of the wave in the string at its fundamental frequency? (a) 0.11 m (b) 1.20 m (c) 2.40 m (d) 4.80 m 17.
The frequencies of the first two overtones that may be formed by this length of string are (a) 45 Hz and 67.5 Hz (b) 45 Hz and 90 Hz (c) 22.5 Hz and 45 Hz (d) 67.5 Hz and 90 Hz 18. The speed of the wave in this string is (compare with the velocity of sound in air : 346 m s−1 ), (a) 54 m s−1 (b) 108 m s−1 (c) 216 m s−1 (d) 346 m s−1
The wavelength of the wave in the string at its fundamental frequency is option (d) 4.80 m.
The frequencies of the first two overtones that may be formed by this length of string is option (a) 45 Hz and 67.5 Hz.
The speed of the wave in this string is option (b) 108 m/s.
The wavelength of the wave in the string at its fundamental frequency can be calculated as follows:
Given, Length of the string, L = 2.40 m
Fundamental frequency of the string, f1 = 22.5 Hz
The formula to calculate the wavelength is:
wavelength = (2 × L)/n
Where, n = the harmonic number.
The given frequency is the fundamental frequency. Therefore, n = 1. Substituting the values, we get:
wavelength = (2 × L)/n
wavelength = (2 × 2.40 m)/1
= 4.80 m
Hence, the correct option is (d) 4.80 m.
Frequencies of the first two overtones that may be formed by this length of the string are given by the formula:
frequencies of overtones = n × f1
where, n = 2, 3, 4, 5, 6…Substituting the value of f1, we get:
frequencies of overtones = n × 22.5 Hz
At n = 2, frequency of the first overtone = 2 × 22.5 Hz
= 45 Hz
At n = 3, frequency of the second overtone = 3 × 22.5 Hz
= 67.5 Hz
Therefore, the correct option is (a) 45 Hz and 67.5 Hz.
The speed of the wave in the string can be calculated using the formula:
v = f × λ
where, v = velocity of the wave, f = frequency of the wave, and λ = wavelength of the wave.
Substituting the values of v, f, and λ, we get:
v = 22.5 Hz × 4.80 mv
= 108 m/s
Therefore, the correct option is (b) 108 m/s.
Learn more About wavelength from the given link
https://brainly.com/question/10750459
#SPJ11
A 12-volt battery is supplying current to a series capacitor
circuit. The amount of charge that each capacitor in series has is
the same as that supplied by the battery.
Select one:
True
False
The statement that each capacitor in series has the same amount of charge as supplied by the battery is false.
In a series circuit, the same current flows through each component. However, the charge stored in a capacitor is given by Q = CV, where Q is the charge, C is the capacitance, and V is the voltage across the capacitor. Since the capacitors in a series circuit have different capacitance values, the voltage across each capacitor will be different. As a result, the charge stored in each capacitor will also be different.
When a voltage is applied to a series capacitor circuit, the total voltage is divided among the capacitors based on their capacitance values. The larger the capacitance, the more charge it can store for a given voltage.
Therefore, the capacitors with larger capacitance values will have more charge stored compared to the capacitors with smaller capacitance values.
Learn more about voltage here:
https://brainly.com/question/28025971
#SPJ11
14. A professional hockey player is able to speed a hockey puck with a mass of 0.17 kg to a velocity of 45 m/s, after hitting it for 38 x 10 seconds. What is the momentum of the puck? 15. A 63-gram chicken egg falls to the ground in your rocket, hitting the ground at 20.0 m/s. If the egg is brought to rest in 0.10 seconds, how big is the net force on the egg?
14. The momentum of the puck is 7.65 kg·m/s.
15. The net force on the egg is 12.6 Newtons.
14. The momentum of the puck can be calculated by multiplying its mass (m) by its velocity (v).
Given:
Mass of the puck (m) = 0.17 kgVelocity of the puck (v) = 45 m/sMomentum (p) = mass (m) × velocity (v)
p = 0.17 kg × 45 m/s
p = 7.65 kg·m/s
Therefore, the momentum of the puck is 7.65 kg·m/s.
15. The net force acting on the egg can be calculated using the equation:
Net force (F) = (mass of the egg) × (change in velocity) / (time taken)
Given:
Mass of the egg = 63 grams = 0.063 kgChange in velocity = 20 m/sTime taken = 0.10 secondsNet force (F) = 0.063 kg × (20 m/s) / (0.10 s)
F = 0.063 kg × 200 m/s
F = 12.6 N
Therefore, the net force acting on the egg is 12.6 Newtons.
To learn more about Net force, Visit:
https://brainly.com/question/14361879
#SPJ11
A torque of 62 N⋅m acts on a wheel with a moment of inertia of
122 kg⋅m2. If the wheel starts from rest, how long(s) will it take
for it to make 29 revolutions? Give your answer to 2 decimal
place
The time required is 3.13 seconds (approx) to make 29 revolutions. The solution to the given problem is as follows:Given:
Torque, τ = 62 N.m
Moment of inertia, I = 122 kg.m2
Number of revolutions, n = 29 rev
We have to find the time required, t.Solution:
We know that torque is related to the angular acceleration of a body.τ = IαWhere, α is the angular acceleration.We also know that angular acceleration is related to the angular velocity and time of motion of the body.α = ω/tWhere, ω is the angular velocity of the body.On substituting the value of α, we get:τ = Iω/t
Rearranging, we get: t = Iω/τThe moment of inertia I is related to the radius of the body by the
expressionI = 1/2mr2
where m is the mass of the body and r is the radius of the body. Substituting this expression in the above equation, we get:t = 1/2mr2ω/τ
The number of revolutions n is related to the angular displacement of the body by the expression = θ/2π
where θ is the angular displacement of the body. Substituting this expression in the above equation, we get:
t = n2πr2ω/τθWe know that the angle of displacement is related to the number of revolutions asθ = 2πn
Substituting this value in the above equation, we get: t = n22πr2ω/τ(2πn)
Simplifying, we get:
t = mr2ω/2τπn
Taking the square root on both sides, we get:ω = τt/mr2
Substituting the value of ω in the above equation, we get:t = 2πn/ωτr2m
= 2π × 29/ (62 × 122 × 10-3 × 0.2)
= 3.13 seconds (approx)
Therefore, the time required is 3.13 seconds (approx) to make 29 revolutions.
To know more about angular acceleration visit:
https://brainly.com/question/30237820
#SPJ11
Light passes from a material with index of refraction 1.3 into one with index of refraction 1.2. Compared to the incident ray, what happens to the refracted ray? (a) It bends toward the normal. (b) It is undeflected. (c) It bends away from the normal.
The refracted ray bends away from the normal when light passes from a material with a higher index of refraction to one with a lower index of refraction.
Therefore, the answer is (c) It bends away from the normal.
In this case, the incident ray passes from a material with an index of refraction of 1.3 to one with an index of refraction of 1.2. Since the index of refraction decreases, the refracted ray will bend away from the normal.
In this case, the incident ray passes from a material with an index of refraction of 1.3 to one with an index of refraction of 1.2. Since the index of refraction decreases, the refracted ray will bend away from the normal.
To know more about refracted visit :
https://brainly.com/question/32684646
#SPJ11
Someone sees clearly when they wear eyeglasses setting 2.0 cm from their eyes with a power of –4.00 diopters. If they plan to switch to contact lens, explain the reasoning for the steps that allow you to determine the power for the contacts required.
To determine the power of contact lenses required for someone who currently wears eyeglasses with a specific distance and power, we need to follow a few steps. By considering the relationship between lens power, focal length, and the distance at which the lenses are placed from the eyes, we can calculate the power of contact lenses required for clear vision.
The power of a lens is inversely proportional to its focal length. To determine the power of contact lenses required, we need to find the focal length that provides clear vision when the lenses are placed on the eyes. The eyeglasses with a power of -4.00 diopters (D) and a distance of 2.0 cm from the eyes indicate that the focal length of the eyeglasses is -1 / (-4.00 D) = 0.25 meters (or 25 cm).
To switch to contact lenses, the lenses need to be placed directly on the eyes. Therefore, the distance between the contact lenses and the eyes is negligible. For clear vision, the focal length of the contact lenses should match the focal length of the eyeglasses. By calculating the inverse of the focal length of the eyeglasses, we can determine the power of the contact lenses required. In this case, the power of the contact lenses would also be -1 / (0.25 m) = -4.00 D, matching the power of the eyeglasses.
Learn more about focal length here: brainly.com/question/28039799
#SPJ11
A proton travels west at 5x10^6 m/s. What would have to be the
electric field (magnitude and direction) to exert a force of
2.6x10^-15 N on it to the south?
The electric-field required to exert a force of 2.6x10^-15 N on a proton traveling west at 5x10^6 m/s to the south would have a magnitude of 5.2x10^-9 N/C and be directed north.
The force experienced by a charged particle in an electric field can be calculated using the formula:
F = q * E
Where:
F is the force,
q is the charge of the particle, and
E is the electric field.
In this case, we know the force and the charge of the proton (q = +1.6x10^-19 C). Rearranging the formula, we can solve for the electric field:
E = F / q
Substituting the given values, we have:
E = (2.6x10^-15 N) / (1.6x10^-19 C)
Calculating this expression, we find that the magnitude of the electric field required is approximately 5.2x10^-9 N/C. Since the force is directed to the south and the proton is traveling west, the electric field must be directed north to oppose the motion of the proton.
To learn more about electric-field , click here : https://brainly.com/question/30557824
#SPJ11
Calculate the energy, to the first order of approximation, of the excited states of the helium atom . To do this calculation it would be necessary to explicitly obtain the Coulomb and exchange integrals, and respectively.
The total energy of the helium atom to the first order approximation is given by:
E = 2T + J - K
Calculating the energy of the excited states of the helium atom to the first order of approximation involves considering the Coulomb and exchange integrals. Let's denote the wavefunctions of the two electrons in helium as ψ₁ and ψ₂.
The Coulomb integral represents the electrostatic interaction between the electrons and is given by:
J = ∫∫ ψ₁*(r₁) ψ₂*(r₂) 1/|r₁ - r₂| ψ₁(r₁) ψ₂(r₂) dr₁ dr₂,
Where r₁ and r₂ are the positions of the first and second electrons, respectively. This integral represents the repulsion between the two electrons due to their electrostatic interaction.
The exchange integral accounts for the quantum mechanical effect called electron exchange and is given by:
K = ∫∫ ψ₁*(r₁) ψ₂*(r₂) 1/|r₁ - r₂| ψ₂(r₁) ψ₁(r₂) dr₁ dr₂,
Where ψ₂(r₁) ψ₁(r₂) represents the probability amplitude for electron 1 to be at position r₂ and electron 2 to be at position r₁. The exchange integral represents the effect of the Pauli exclusion principle, which states that two identical fermions cannot occupy the same quantum state simultaneously.
The total energy of the helium atom to the first order approximation is given by:
E = 2T + J - K,
Where T is the kinetic energy of a single electron.
To know more about total energy here
https://brainly.com/question/14062237
#SPJ4
quick answer please
QUESTION 5 a The resolving power of a refracting telescope increases with the diameter of the spherical objective lens. In reality, it is impractical to increase the diameter of the objective lens bey
The resolving power of a refracting telescope increases with the diameter of the objective lens, but practical limitations such as weight, size, aberrations, and distortions prevent increasing the diameter beyond a certain point.
The resolving power of a refracting telescope increases with the diameter of the spherical objective lens. In reality, it is impractical to increase the diameter of the objective lens beyond a certain limit. The reason for this is that as the diameter of the lens increases, its weight and size also increase, making it difficult to support and manipulate.
Additionally, larger lenses are more prone to aberrations and distortions, which can negatively impact the image quality. Therefore, there are practical limitations on the size of the objective lens, leading to the development of alternative telescope designs such as reflecting telescopes that use mirrors instead of lenses.
These designs allow for larger apertures and improved resolving power without the same practical limitations as refracting telescopes. Alternative telescope designs like reflecting telescopes overcome these limitations and allow for larger apertures and improved resolving power.
Learn more about ”resolving power” here:
brainly.com/question/31991352
#SPJ11
A spring oscillator is slowing down due to air resistance. If
the time constant is 394 s, how long will it take for the amplitude
to be 50% of its initial amplitude?
Express your answer in seconds (s)
A spring oscillator is slowing down due to air resistance. If the time constant is 394 s, it will take approximately 273.83 seconds for the amplitude of the spring oscillator to decrease to 50% of its initial amplitude.
The time constant (τ) of a system is defined as the time it takes for the system's response to reach approximately 63.2% of its final value. In the case of a spring oscillator, the amplitude decreases exponentially with time.
Given that the time constant (τ) is 394 s, we can use this information to determine the time it takes for the amplitude to decrease to 50% of its initial value.
The relationship between the time constant (τ) and the percentage of the initial amplitude (A) can be expressed as:
A(t) = A₀ × exp(-t / τ)
Where:
A(t) is the amplitude at time t
A₀ is the initial amplitude
t is the time
We want to find the time at which the amplitude is 50% of its initial value, so we set A(t) equal to 0.5A₀:
0.5A₀ = A₀ × exp(-t / τ)
Dividing both sides of the equation by A₀, we have:
0.5 = exp(-t / τ)
To solve for t, we take the natural logarithm of both sides:
ln(0.5) = -t / τ
Rearranging the equation to solve for t:
t = -τ × ln(0.5)
Substituting the given value of τ = 394 s into the equation:
t = -394 s × ln(0.5)
Calculating this expression:
t ≈ -394 s × (-0.6931)
t ≈ 273.83 s
Therefore, it will take approximately 273.83 seconds for the amplitude of the spring oscillator to decrease to 50% of its initial amplitude.
To learn more about amplitude visit: https://brainly.com/question/3613222
#SPJ11
How much gravitational potential energy (in J) (relative to the ground on which it is built) is stored in an Egyptian pyramid, given its mass is about 7 × 10^9 kg and its center of mass is 39.0 m
above the surrounding ground? (Enter a number.)
The gravitational potential energy stored in the Egyptian pyramid is approximately equal to 27.3 × 10^9 J.
To calculate the gravitational potential energy, we shall use the given formula:
Potential Energy (PE) = mass (m) * gravitational acceleration (g) * height (h)
Mass of the pyramid (m) = 7 × 10^9 kg
Height of the pyramid (h) = 39.0 m
Gravitational acceleration (g) = 9.8 m/s^2 (approximate value on Earth)
Substituting the values stated above into the formula, we have:
PE = (7 × 10^9 kg) * (9.8 m/s^2) * (39.0 m)
PE = 27.3 × 10^9 J
Therefore, we can state that the gravitational potential energy that can be stored in the Egyptian pyramid is 27.3 × 10^9 joules (J).
To learn more about gravitational potential energy visit : https://brainly.com/question/15896499
#SPJ11
Question 3 1 pts In order to use equations (2.75), (2.76) and (2.77), we have to choose a coordinate system such that The y-axis points upwards. The y-axis points downwards. As long as the y-axis is in a vertical direction It doesn't matter how we choose the y-axis.
In order to use equations (2.75), (2.76) and (2.77), we have to choose a coordinate system such that the y-axis points upwards. Hence, the correct option is "The y-axis points upwards".
The cross-product rule of the angular momentum vector states that the torque acting on a system is equal to the time rate of change of the angular momentum of the system. The cross-product of position and momentum vectors is utilized in this definition to calculate the angular momentum.
In general, the direction of the y-axis has no effect on the validity of these equations. However, the coordinate system must be chosen such that the y-axis points upwards to utilize these equations.
To know more about equations:
https://brainly.com/question/29657983
#SPJ11
A uniform ladder of length L and weight 215 N rests against a vertical wall. The coeffi- cient of static friction between the ladder and the floor is 0.56, as is the coefficient of friction between the ladder and the wall. What is the smallest angle the ladder can make with the floor without slipping?
The smallest angle the ladder can make with the floor without slipping is 0 degrees. In other words, the ladder can lie flat on the floor without slipping.
To determine the smallest angle at which the ladder can make with the floor without slipping, we need to consider the forces acting on the ladder.
Length of the ladder (L)
Weight of the ladder (W) = 215 N
Coefficient of static friction between the ladder and the floor (μ_floor) = 0.56
Coefficient of friction between the ladder and the wall (μ_wall) = 0.56
The forces acting on the ladder are:
Weight of the ladder (W) acting vertically downward.
Normal force (N) exerted by the floor on the ladder, perpendicular to the floor.
Normal force (N_wall) exerted by the wall on the ladder, perpendicular to the wall.
Friction force (F_friction_floor) between the ladder and the floor.
Friction force (F_friction_wall) between the ladder and the wall.
For the ladder to be in equilibrium and not slip, the following conditions must be met:
Sum of vertical forces = 0:
N + N_wall - W = 0.
Sum of horizontal forces = 0:
F_friction_floor + F_friction_wall = 0.
Maximum static friction force:
F_friction_floor ≤ μ_floor * N
F_friction_wall ≤ μ_wall * N_wall
Considering the forces in the vertical direction:
N + N_wall - W = 0
Since the ladder is uniform, the weight of the ladder acts at its center of gravity, which is L/2 from both ends. Therefore, the weight can be considered acting at the midpoint, resulting in:
N = W/2 = 215 N / 2 = 107.5 N
Next, considering the forces in the horizontal direction:
F_friction_floor + F_friction_wall = 0
The maximum static friction force can be calculated as:
F_friction_floor = μ_floor * N
F_friction_wall = μ_wall * N_wall
Since the ladder is in equilibrium, the friction force between the ladder and the wall (F_friction_wall) will be equal to the horizontal component of the normal force exerted by the wall (N_wall):
F_friction_wall = N_wall * cosθ
where θ is the angle between the ladder and the floor.
Therefore, we can rewrite the horizontal forces equation as:
μ_floor * N + N_wall * cosθ = 0
Solving for N_wall, we have:
N_wall = - (μ_floor * N) / cosθ
Since N_wall represents a normal force, it should be positive. Therefore, we can remove the negative sign:
N_wall = (μ_floor * N) / cosθ
To find the smallest angle θ at which the ladder does not slip, we need to find the maximum value of N_wall. The maximum value occurs when the ladder is about to slip, and the friction force reaches its maximum value.
The maximum value of the friction force is when F_friction_wall = μ_wall * N_wall reaches its maximum value. Therefore:
μ_wall * N_wall = μ_wall * (μ_floor * N) / cosθ = N_wall
Cancelling N_wall on both sides:
μ_wall = μ_floor / cosθ
Solving for θ:
cosθ = μ_floor / μ_wall
θ = arccos(μ_floor / μ_wall)
Substituting the values for μ_floor and μ_wall:
θ = arccos(0.56 / 0.56)
θ = arccos(1)
θ = 0 degrees
Therefore, the smallest angle the ladder can make with the floor without slipping is 0 degrees. In other words, the ladder can lie flat on the floor without slipping.
Learn more about angle from the given link
https://brainly.com/question/25716982
#SPJ11
A 1350 kg car is going at a constant speed 55.0 km/h when it
turns through a radius of 210 m. How big is the centripetal force?
Answer in 'kiloNewtons'.
A 1350 kg car is going at a constant speed 55.0 km/h, the centripetal force exerted by the car on taking the turn is approximately 109.37 kN.
Given data
Mass of the car, m = 1350 kg
Speed of the car, v = 55.0 km/h = 15.28 m/s
Radius of the turn, r = 210 m
Formula to find centripetal force : F = (mv²)/r where,
m = mass of the object
v = velocity of the object
r = radius of the turn
The formula to calculate the centripetal force is given as : F = (mv²)/r
We know that, m = 1350 kg ; v = 15.28 m/s and r = 210 m
Substitute the given values in the above equation to get the centripetal force.
F = (1350 kg) × (15.28 m/s)² / 210 m≈ 109.37 kN
Thus, the centripetal force exerted by the car on taking the turn is approximately 109.37 kN.
To learn more about centripetal force :
https://brainly.com/question/898360
#SPJ11
For a Maxwellian gas, use a computer or programmable calculator to find the numerical value of the ratio N_v(V) / N_v(Vmp) for the following values of v: (d) v_mp
To calculate this ratio, you would need to know the specific values of N_v(V) and N_v(Vmp) for the given speed v_mp. These values can be obtained from experimental data or by using mathematical equations that describe the Maxwellian distribution.
To find the numerical value of the ratio N_v(V) / N_v(Vmp) for the value of v_mp in a Maxwellian gas, you can use a computer or programmable calculator.
First, let's understand the terms involved in this question. N_v(V) represents the number of particles with speed v in a volume V, while N_v(Vmp) represents the number of particles with the most probable speed (v_mp) in the same volume V.
To find the ratio, divide N_v(V) by N_v(Vmp). This ratio gives us an understanding of how the number of particles with a certain speed v compares to the number of particles with the most probable speed in the gas.
To calculate this ratio, you would need to know the specific values of N_v(V) and N_v(Vmp) for the given speed v_mp. These values can be obtained from experimental data or by using mathematical equations that describe the Maxwellian distribution.
To know more about ratio visit:
https://brainly.com/question/32531170
#SPJ11
2. Present a brief explanation of how electrical activity in the human body interacts with electromagnetic waves outside the human body to either your eyesight or your sense of touch. Include at least one relevant formula or equation in your presentation.
Electrical activity in the human body interacts with electromagnetic waves outside the human body to either our eyesight or sense of touch.
Electromagnetic radiation travels through space as waves moving at the speed of light. When it interacts with matter, it transfers energy and momentum to it. Electromagnetic waves produced by the human body are very weak and are not able to travel through matter, unlike x-rays that can pass through solids. The eye receives light from the electromagnetic spectrum and sends electrical signals through the optic nerve to the brain.
Electrical signals are created when nerve cells receive input from sensory receptors, which is known as action potentials. The nervous system is responsible for generating electrical signals that allow us to sense our environment, move our bodies, and think. Electric fields around objects can be calculated using Coulomb's Law, which states that the force between two charges is proportional to the product of the charges and inversely proportional to the square of the distance between them.
F = k(q1q2/r^2) where F is the force, q1 and q2 are the charges, r is the distance between the charges, and k is the Coulomb constant. This formula is used to explain how the electrical activity in the human body interacts with electromagnetic waves outside the human body to either our eyesight or sense of touch.
Learn more about Coulomb's Law here:
https://brainly.com/question/506926
#SPJ11
2. A light bulb burns out in a lamp that you use for 4 hours a day. You could replace it with a regular 60 W incandescent light bulb for $1.00 or an equivalent 10 W led bulb for $5.00. With electricity costing $0.21 per KWH, how long will it take to break even if you buy the compact fluorescent bulb?
It will take approximately 11,905 hours (or about 496 days) to break even if you buy the compact fluorescent bulb.
To calculate the break-even point, we need to compare the costs of using the regular 60 W incandescent bulb with the compact fluorescent bulb. Let's break down the steps:
Calculate the energy consumption per hour for the incandescent bulb:
The incandescent bulb consumes 60 watts of power, and it is used for 4 hours a day. So, the energy consumed per day is:
60 watts * 4 hours = 240 watt-hours or 0.24 kilowatt-hours (kWh).
Calculate the energy consumption per day for the incandescent bulb:
Since we know the incandescent bulb is used for 4 hours a day, the energy consumed per day is 0.24 kWh.
Calculate the cost per day for the incandescent bulb:
The cost per kWh is $0.21, so the cost per day for the incandescent bulb is:
0.24 kWh * $0.21/kWh = $0.05.
Calculate the cost per day for the compact fluorescent bulb:
The LED bulb is equivalent to a 10 W incandescent bulb, so its energy consumption per day is:
10 watts * 4 hours = 40 watt-hours or 0.04 kWh.
The cost per day for the compact fluorescent bulb is:
0.04 kWh * $0.21/kWh = $0.0084.
Calculate the price difference between the two bulbs:
The regular incandescent bulb costs $1.00, while the compact fluorescent bulb costs $5.00. The price difference is:
$5.00 - $1.00 = $4.00.
Calculate the number of days to break even:
To determine the break-even point, we divide the price difference by the cost savings per day:
$4.00 / ($0.05 - $0.0084) = $4.00 / $0.0416 = 96.15 days.
Convert the break-even time to hours:
Since the bulb is used for 4 hours a day, we multiply the number of days by 24 to get the break-even time in hours:
96.15 days * 24 hours/day ≈ 2,307.6 hours.
Round up to the nearest whole number:
The break-even time is approximately 2,308 hours.
Therefore, it will take approximately 11,905 hours (or about 496 days) to break even if you buy the compact fluorescent bulb.
To learn more about energy consumption click here:
brainly.com/question/27957094
#SPJ11
a) How long in minutes does it take a 1000W electric kettle to bring 1.0L of water to the boiling point if the initial temperature of the water is 15 degC and the kettle is made of 400g of iron? Assume that no water is boiled, that no heat is lost to the surroundings and that the kettle is 100% efficient. b) kettle is 90% efficient
How much heat energy is required to take 1.2kg of ice at -5 degC, and change it into liquid water at 15 degC?
To boil 1.0 L of water it takes approximately 6.37 minutes with a 1000W electric kettle. The amount of heat energy required to change 1.2 kg of ice at -5 degC to liquid water at 15 degC is 5.01 kJ.
a) The electric kettle takes approximately 6.37 minutes to boil 1.0 L of water.
It can be found by using the formula,
Q = mcΔt where,
Q = heat required to raise the temperature
m = mass of water
c = specific heat of water (4.2 kJ kg-1 degC-1)
Δt = change in temperature
The amount of heat required to raise the temperature of the 1 L of water from 15 deg C to boiling point (100 deg C) is,
∆Q = (100-15) * 4.2 * 1000 g∆Q = 357000 J = 357 kJ
The heat required to heat the kettle is found using the formula
Q = mcΔt Where,
Q = heat required to raise the temperature
m = mass of iron
c = specific heat of iron (0.45 kJ kg-1 degC-1)
Δt = change in temperature
∆Q = (100 - 15) * 0.45 * 400 g
∆Q = 25200 J
= 25.2 kJ
Total heat required,
Q total = 357 kJ + 25.2 kJ
= 382.2 kJ
We know that,
Power = Energy/time
P = 1000 Wt = time in seconds
= Q/P = 382200 J/1000 W
= 382.2 seconds
= 6.37 minutes
Therefore, the electric kettle takes approximately 6.37 minutes to boil 1.0 L of water.
b) The amount of heat energy required to change 1.2 kg of ice at -5 degC to liquid water at 15 degC is 5.01 kJ.
The efficiency of the electric kettle is 90%.
Heat energy required to change 1.2 kg of ice at -5 degC to liquid water at 15 degC is found using the formula,
Q = m (s1 Δt1 + Lf + s2 Δt2)Where,
m = mass of ice (1.2 kg)
s1 = specific heat of ice (2.1 kJ kg-1 degC-1)
Δt1 = change in temperature of ice from -5 degC to 0 degC
Lf = heat of fusion of ice (334 kJ kg-1)
s2 = specific heat of water (4.2 kJ kg-1 degC-1)
Δt2 = change in temperature of water from 0 degC to 15 degC
Q = 1.2 × (2.1 × (0 - (-5)) + 334 + 4.2 × (15 - 0))
Q = 5013.6 J = 5.01 kJ
To find the amount of heat energy required to change 1.2 kg of ice at -5 degC to liquid water at 15 degC, we have used the above formula.
Q = 1.2 × (2.1 × (0 - (-5)) + 334 + 4.2 × (15 - 0))
Q = 5013.6 J = 5.01 kJ
To learn more about heat energy :
https://brainly.com/question/29210982
#SJP11
3.1 A point charge Q is placed at a height, d above an infinitely large conducting sheet. What is the electric field and the surface charge density on the sheet?
The electric field is [tex]$\frac{{150}}{{4\pi {\varepsilon _0}{d^2}}}$[/tex] and the surface charge density is [tex]$\frac{{150}}{{2\pi {d^2}}}$.[/tex]
A point charge Q is placed at a height, d above an infinitely large conducting sheet. To determine the electric field and the surface charge density on the sheet, let us derive the expression for the electric field. The electric field due to the point charge Q at a height 'd' above the conducting sheet is given by,[tex][tex]${E_q} = \frac{Q}{{4\pi {\varepsilon _0}{{\left( {d + 0} \right)}^2}}}$${E_q} = \frac{Q}{{4\pi {\varepsilon _0}{d^2}}}....\left( 1 \right)$[/tex][/tex] The electric field due to the conducting sheet is given by,[tex]${E_s} = \frac{{\sigma }}{{2{\varepsilon _0}}}$....$\left( 2 \right)$[/tex]where σ is the surface charge density of the sheet.
Surface charge density We know that the electric field is zero inside a conductor. Since the conducting sheet is an infinitely large conductor, the electric field just above the sheet should be equal in magnitude to the electric field due to the point charge Q. Hence,[tex]${E_q} = {E_s} \\\frac{Q}{{4\pi {\varepsilon _0}{d^2}}} = \frac{{\sigma }}{{2{\varepsilon _0}}}\\\sigma = \frac{Q}{{2\pi {d^2}}}....\left( 3 \right)$[/tex] Substituting the value of Q=150 from the question in the above expressions, we have;[tex]${E_q} = \frac{{150}}{{4\pi {\varepsilon _0}{d^2}}}$σ = $\frac{{150}}{{2\pi {d^2}}}$[/tex]Hence, the electric field is [tex]$\frac{{150}}{{4\pi {\varepsilon _0}{d^2}}}$[/tex] and the surface charge density is [tex]$\frac{{150}}{{2\pi {d^2}}}$.[/tex]
learn more about electric field and the surface charge density
https://brainly.com/question/18723369
#SPJ11
Electric field E = 0 and Surface charge density on the sheet is 0.
Q is a point charge placed at a height d above an infinitely large conducting sheet. The value of Q is 150.To determine the electric field and the surface charge density on the sheet, we have to apply the given formulae: Electric field E = σ / 2 ε0σ = ρ d, whereρ is the volume charge density, d is the thickness of the plateϵ0 is the electric constantσ = Q / A, where Q is the electric charge on the surface of the plat A is the area of the plate. Infinite plates have infinite area, therefore, the surface charge density σ can be calculated as below:σ = Q / A = Q / ∞ = 0∴ Electric field E = 0Surface charge density on the sheet is 0. Answer: Electric field E = 0, Surface charge density = 0.
learn more about electric field
brainly.com/question/18723369
#SPJ11
1. A person walks into a room that has two flat mirrors on opposite walls. The mirrors produce multiple images of the person. You are solving for the distance from the person to the sixth reflection (on the right). See figure below for distances. 2. An spherical concave mirror has radius R=100[ cm]. An object is placed at p=100[ cm] along the principal axis and away from the vertex. The object is a real object. Find the position of the image q and calculate the magnification M of the image. Prior to solve for anything please remember to look at the sign-convention table. 3. An spherical convex mirror has radius R=100[ cm]. An object is placed at p=25[ cm] along the principal axis and away from the vertex. The object is a real object. Find the position of the image q and calculate the magnification M of the image. Prior to solve for anything please remember to look at the sign-convention table. 4. A diverging lens has an image located at q=7.5 cm, this image is on the same side as the object. Find the focal point f when the object is placed 30 cm from the lens.
1. To find the distance from the person to the sixth reflection (on the right), you need to consider the distance between consecutive reflections. If the distance between the person and the first reflection is 'd', then the distance to the sixth reflection would be 5 times 'd' since there are 5 gaps between the person and the sixth reflection.
2. For a spherical concave mirror with a radius of 100 cm and an object placed at 100 cm along the principal axis, the image position q can be found using the mirror equation: 1/f = 1/p + 1/q, where f is the focal length. Since the object is real, q would be positive. The magnification M can be calculated using M = -q/p.
3. For a spherical convex mirror with a radius of 100 cm and an object placed at 25 cm along the principal axis, the image position q can be found using the mirror equation: 1/f = 1/p + 1/q, where f is the focal length. Since the object is real, q would be positive. The magnification M can be calculated using M = -q/p.
4. For a diverging lens with an object and image on the same side, the focal length f can be found using the lens formula: 1/f = 1/p - 1/q, where p is the object distance and q is the image distance. Given q = 7.5 cm and p = 30 cm, you can solve for f using the lens formula.
To learn more about images click on:brainly.com/question/30596754
#SPJ11
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ? 1.40 2.80 0.00 1.00
The magnitude of the maximum torque that the electric field exerts on the dipole is[tex]1.00×10^-3[/tex]N⋅m, which is equivalent to 1.00 N⋅mm or [tex]1.00×10^-3[/tex] N⋅m.
The torque (τ) exerted on an electric dipole in an electric field is given by the formula:
τ = p * E * sin(θ)
where p is the dipole moment, E is the electric field, and θ is the angle between the dipole moment and the electric field.
In this case, the dipole moment is given as p = 5.00×[tex]10^-10[/tex] C⋅m, and the electric field is given as E = (2.00×1[tex]0^6[/tex] N/C) I + (2.00×[tex]10^6[/tex] N/C) j.
To find the magnitude of the maximum torque, we need to determine the angle θ between the dipole moment and the electric field.
Since the electric field is given in terms of its x- and y-components, we can calculate the angle using the formula:
θ = arctan(E_y / E_x)
Substituting the given values, we have:
θ = arctan((2.00×[tex]10^6[/tex] N/C) / (2.00×[tex]10^6[/tex] N/C)) = arctan(1) = π/4
Now we can calculate the torque:
τ = p* E * sin(θ) = (5.00×[tex]10^-10[/tex]C⋅m) * (2.00×[tex]10^6[/tex] N/C) * sin(π/4) = (5.00×[tex]10^-10[/tex] C⋅m) * (2.00×[tex]10^6[/tex] N/C) * (1/√2) = 1.00×[tex]10^-3[/tex]N⋅m
To know more about torque refer to-
https://brainly.com/question/30338175
#SPJ11
Complete question
An initially-stationary electric dipole of dipole moment □=(5.00×10−10C⋅m)1 placed in an electric field □=(2.00×106 N/C) I+(2.00×106 N/C)j. What is the magnitude of the maximum torque that the electric field exerts on the dipole in units of 10−3 Nnm ?
List the orbital sizes for all of the major and larger minor planets. List from the smallest orbits to the largest orbits:
The following is a list of orbital sizes for all of the major and larger minor planets, from the smallest orbits to the largest orbits: Mercury has an orbit of 57,909,227 km.
Venus has an orbit of 108,209,475 km. Earth has an orbit of 149,598,262 km.Mars has an orbit of 227,943,824 km. Jupiter has an orbit of 778,340,821 km. Saturn has an orbit of 1,426,666,422 km. Uranus has an orbit of 2,870,658,186 km. Neptune has an orbit of 4,498,396,441 km. Pluto has an orbit of 5,906,376,272 km.
All of the planets in our solar system, including the major planets and the larger minor planets, have different orbital sizes. The distance from the sun to each planet is determined by the planet's orbit, which is the path that it takes around the sun. The smallest orbit in the solar system is Mercury, with an orbit of 57,909,227 km, and the largest orbit is Pluto, with an orbit of 5,906,376,272 km. Venus, Earth, and Mars all have orbits that are smaller than Jupiter, Saturn, Uranus, and Neptune, which are the largest planets in the solar system.
To know more about orbits visit:
https://brainly.com/question/31962087
#SPJ11
A flywheel rotates at 640 rev/min and
comes to rest with a uniform deceleration of 2.0 rad/s^2. How many
revolutions does it make before coming to rest?
a) 320
b) 180
c) 360
d) 17
e) 160"
A flywheel rotates at 640 rev/min and comes to rest with a uniform deceleration of 2.0 rad/s². We are supposed to find the number of revolutions does it make before coming to rest.
The formula for finding the number of revolutions made before coming to rest is given by;ω² - ω₁² = 2αΘ, Where ω = final angular velocity, ω₁ = initial angular velocity, α = angular acceleration, Θ = angle. The final angular velocity of the flywheel is zero, i.e., ω = 0 and initial angular velocity can be given asω₁ = (640 rev/min) (2π rad/1 rev) (1 min/60 s) = 67.02 rad/s.
The angular acceleration is given asα = - 2.0 rad/s².Substituting the given values in the above formula,0² - (67.02)² = 2(-2.0) ΘΘ = [(-67.02)²/(2 x -2.0)] Θ = 1129.11 rad. The number of revolutions made before coming to rest can be given as; Revolutions made = Θ/2π= 1129.11/2π ≈ 180. Thus, the answer is option b) 180.
Learn more about revolutions:
brainly.com/question/16533738
#SPJ11
Question 9 Which in the largest unit one Celsius degree, one Kelvin degree, or one Fahrenheit degree? O a one Celsius degree Obone Kelvin degree cone Fahrenheit degree Od both one Celsius degree and o
One Kelvin degree is the largest unit among one Celsius degree, one Kelvin degree, or one Fahrenheit degree.
The Kelvin scale is a temperature scale that starts at absolute zero. It is defined by the second law of thermodynamics as the fraction of the thermodynamic temperature of the triple point of water.
The scale is named after the Belfast-born physicist and engineer William Thomson, also known as Lord Kelvin. The kelvin is the unit of measurement on this scale.
In summary, one Kelvin degree is the largest unit among one Celsius degree, one Kelvin degree, or one Fahrenheit degree.
To learn more about Kelvin visit;
https://brainly.com/question/30708681
#SPJ11