Pleaseeeeeee help me out.

Typically, the "refracted angle" is used to refer to the "angle of deviation."

Snell's Law is simply applied in this case.

Since n1sin1 = n2sin2,

The incidence angle is 1

The refracted angle is 2

The appropriate indices of refraction are n1 and n2.

the standard value for air, n1, is 1.

n2 = 1.5

As a result, the refractive indices of the two media may be related through the angle associated with incidence and refraction. The incident ray, the refracted ray, and the normal ray are all said to be on the same plane.

Snell's Law is particularly significant for optical technologies like fibre optics. According to Snell's Law, the refractive indices of the materials at the contact are proportional to the ratio of the sine of the angles of incidence and transmission.

The extension is obeyed by the e-ray Because the refractive index of an e-ray changes with the angle between the wave vector and optical axis, Snell's law applies. It is important to consider e-ray propagation in the uniaxial crystal.

Learn more about Snell's Law refer

https://brainly.com/question/10112549

#SPJ9

Ferromagnetic substance are strongly attractive to a magnet.

Ferromagnetic material are those materials which shows magnetic property also in the absence of external magnetic field

It's Atom have permanent dipole moment present in domains.

These are used in the industry.

example of ferromagnetic substance are nickel, iron ,Cobalt etc

When ferromagnetic object is  placed  in a magnetic field  the domains will oriented in the direction of magnetic field even after the removal of applied magnetic field it will not change the shows that it become a permanent magnet.

Magnetic force  on ferromagnetic object depends on the strength of the object and also size of the object

The given question is incomplete. The complete question is.

as a ferromagnetic object gets closer to the magnet, the magnetic force pulling the object decreases exponentially

To know more about ferromagnetic material :

https://brainly.com/question/1064408

#SPJ4

Answer: 90m - 36m = 54 m from the start! Best of luck!

Since the net electric flux which is − 6.89 × 10^6 V⋅m through the hull of the submarine is negative, the number of electric field lines leaving the submarine is less than the number entering it.

A submarine (or sub) is a watercraft capable of independent operation underwater. It differs from a submersible, which has the more limited underwater capability. Most large submarines consist of a cylindrical body with hemispherical (or conical) ends and a vertical structure, usually located amidships, that houses communications and sensing devices as well as periscopes. In modern submarines, this structure is the "sail".

Learn more about  submarines here:

https://brainly.com/question/13952313

#SPJ4

Electricity can be applied to a wire to produce a magnetic field. Charged particles that are in motion produce all magnetic fields. Due to the continually moving electrons inside, even the magnet on your refrigerator is magnetic.

Magnetic forces can be observed in a magnetic field, an electric current, a changing electric field, or a vector field around a magnet. Magnetic compass needles and other permanent magnets line in the direction of magnetic fields similar to those found on Earth. Electrically charged particles are forced to move in a circular or helical path via magnetic fields. The operation of electric motors is generated by this force, which is applied to electric currents in wires in a magnetic field.

To learn more about Magnetic field, visit :

https://brainly.com/question/3433164

#SPJ4

The value of radius (Rg) is 1.475km .

Given,

The mass of the sun = Ms

Radius of the sphere = Rg

work required to remove a small mass (m) from the surface would be equal to its rest energy mc^2 .

The given radius (Rg) is called the gravitational radius for the sun.

We know,

Gravitational potential energy or work done

= Ug = GMs×m/Rg

the given rest energy = E =mc^2

As, it is given that the required work or energy is equal to rest energy,

thus, Ug=E

GMs×m/Rg = mc^2

Rg = GMs/c^2

We know,

G = 6.67×10^-11 N. m^2/kg^2

Ms = 1.99×10^30 kg

c = 3×10^8 m/s

Thus, Rg = 6.67×10^-11 × 1.99×10^30 / (3×10^8)^2

Rg = (13.2733×10^19)/(9×10^16 )

Rg = 1.4748×10^3 m

Rg = 1.475km

Hence, The value of radius (Rg) is 1.475km .

Learn more about gravitational potential energy here:

brainly.com/question/21555779

#SPJ4

The car started 15 ml west of Mulberry road.

Consider the East-West route as the x-axis, and place Mulberry Road's intersection at x = 0. This implies that, the west of the intersection is -ve and the east side will be represented positive.

Given the car ends up at 18 mi West to the intersection, implies that it ends at -18mi from x = 0. Also given the total displacement = - 33mi.

Hence, initial position = final position - displacement

                                  = -18 - (- 33)

                                  = -18 + 33

                                  = 15 mi. So, the car started from 15mi from the Mulberry road and from the East of it.

To learn more about displacement refer the link:

https://brainly.com/question/18264263

#SPJ9

The nodes and antinodes of a standing wave always remain in a fixed position.

In a standing wave, the nodes and anti-nodes are present at fixed points.

The pattern of a standing wave shows that nodes result from destructive interference and anti-node result form constructive interference.

From a rest position, if we observe nodes and anti-node positions then we can see that nodes have zero displacement while anti-nodes are points that exhibit maximum displacement between two waves.

To put it simply, in Physics, the nodes and anti-nodes are two integral phases of a standing wave.

If you need to learn more about standing wave click here:

https://brainly.com/question/26427527

#SPJ4

Answer: the car mass with four would have an accelaration

Explanation:

The speed of the insect is 3.03m/s.

The speed of an object, also known as v in kinematics, is a scalar quantity that refers to the size of the change in that object's position over time or the size of the change in that object's position per unit of time. The instantaneous speed is the upper limit of the average speed as the duration of the time interval gets closer to zero. The average speed of an object over a period of time is calculated by dividing its distance traveled by the length of the interval. Distance divided by time is the dimension of speed.

Explanation:

The frequency that is received by the source after the reflection is given by,

[tex]f_{1} =f_{0} (\frac{V-v}{V-V_{b} } )(\frac{V+v_{b} }{V+v} )[/tex]

[tex]40.4=40 (\frac{343-v}{343-5} ) x (\frac{343+5}{343+v} )\\[/tex]

[tex]v=3.03 m/s[/tex]

To learn more about speed ,visit:

https://brainly.com/question/6280317

#SPJ4

Answer: 1. Reflection

2. Refraction

3.Diffraction

4. Diffration

5.Interference

6. Reflection

7. Refraction

8. Diffraction

Good luck !

The order of decreasing photon energy is FM radio, AM radio, yellow light, and microwaves.

Electromagnetic radiation: The electromagnetic field's waves, which are conveying electromagnetic radiant energy through space, are what make up electromagnetic radiation. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.

Microwave radiation has wavelengths between one meter and one millimeter, which correspond to frequencies between 300 MHz and 300 GHz, respectively.

Radio waves: The electromagnetic spectrum's longest wavelengths, which are found in radio waves, are normally found at frequencies of 300 gigahertz and below.

The radio waves have the highest photon energy and the lowest is microwaves.

So, the highest to lowest order is as follows:

FM radio, AM radio, yellow light, and microwaves.

Learn more about waves here:

https://brainly.com/question/1968356

#SPJ4

By the charge density, the surface area of the cylinder charge is 0.20 nC.

We need to know about charge density to solve this problem. The charge density can be determined as

λ = Q / A

where λ is charge density, Q is charge and A is surface area.

The parameter given is the charge density and the solid cylinder shape which are :

λ = 15 nC/m²

r = 2.5 cm = 0.025 m

L = 6.0 cm = 0.06 m

Find the surface area of cylinder

A = 2πrL + 2πr²

A = 2π. 0.025. 0.06 + 2 . π . 0.025²

A = 0.0134 m²

Find the charges

Q = λ x A

Q = 15 x 0.0134

Q = 0.20 nC

Hence, the surface area of the cylinder charge is 0.20 nC.

Find more on charge density at: brainly.com/question/14568868

#SPJ4

The net flux is positive so the charge in the cylinder is positive To be a uniform field, the field lines mug originate from a plane of charge The net charge inside the cylinder is positive and is distributed on a plane parallel to the ends of the cylinder.

Electric flux, property of an electric field that may be thought of as the number of electric lines of force (or electric field lines) that intersect a given area. Electric field lines are considered to originate on positive electric charges and to terminate on negative charges.

Learn more about cylinder here:

https://brainly.com/question/16134180

#SPJ4

The weight of the iron bolt is 0.706N

A line that is perpendicular to the surface or another line that is regarded as the base is the vertical line. In coordinate geometry, the vertical lines are often perpendicular to the horizontal lines and parallel to the y-axis. Any straight line that runs from top to bottom or bottom to top is considered to be a vertical line. Standing lines are another name for vertical lines. The vertical lines that we typically draw connect the bases of a square or a rectangle. We shall examine the idea of the vertical line and its characteristics in this essay.

To learn more about Vertical lines, Visit:

https://brainly.com/question/13929623

#SPJ4

The magnitude of the magnetic field on the axis of the ring 5 cm from its center is 143 pT.

The radius of the nonconducting ring is R = 10 cm.

The ring is uniformly charged q = 10 μC.

The angular speed of the ring, ω = 20 rad/s

The ring is x = 5 cm from the center of the ring.

Now,

R = 10 cm = 0.1 m

q = 10.0 μC = 10 × 10⁻⁶ C

x = 5 cm = 0.05 m

The magnetic field on the axis of a current loop is given as:

[tex]B =\frac{\mu_{0}IR^{2}}{4 \pi(x^{2}+R^{2})^{\frac{3}{2} }}[/tex]

Now, [tex]I = \frac{q}{\frac{2 \pi}{\omega} }[/tex]

So, the magnitude of the magnetic field which is directed away from the center is:

[tex]B =\frac{\mu_{0} \omega qR^{2}}{4 \pi(x^{2}+R^{2})^{\frac{3}{2} }}[/tex]

[tex]B = \frac{\mu_{0} \times(200) \times (10 \times 10^{-6}) \times (0.1)^{2}}{4 \pi((0.05)^{2}+(0.1)^{2})^\frac{3}{2} }[/tex]

B = 1.43 × 10⁻¹⁰ T

B = 143 pT

Learn more about the magnetic field here:

https://brainly.com/question/14411049

#SPJ4

Decibels are used to measure sound (dB). A motorcycle engine operating is roughly 95 dB louder than regular conversation, which is around 60 dB louder than a whisper.

A relative unit of measurement, the decibel (symbol: dB), is equal to one-tenth of a bel (B). It uses a logarithmic scale to express the ratio of two values of a power or root-power quantity. The power ratio between two signals with a one-decibel difference in level is 101/10 (or roughly 1.26), and the root-power ratio is 10120. (approximately 1.12). The unit can convey an absolute value or a change in the relative value. When used in this method, the unit symbol is frequently followed by letter codes that denote the reference value. In the latter situation, the numeric value reflects the ratio of a value to a fixed reference value. A typical suffix is "V" for the reference value of 1 volt, for instance (e.g., "20 dB").

To learn more about decibels, Visit:

https://brainly.com/question/13972791

#SPJ4

Answer:

see attachment for the answer.

Explanation:

The Newton's Laws that BEST describe the situation is Newton's second law of motion.

Newton's second law of motion states, the force exerted by an object is directly proportional to the product of mass and acceleration of the object.

Also, the law can also be states as force is equal to the rate of change of momentum.

F ∝ Δp

Ft = m(v2 - v1)

The force exerted on the bicyclist by the fence is equal to the change in momentum of the bicyclist. The bicyclist was able to fly over the fence because there is a change in his momentum.

Thus, the Newton's Laws that BEST describe the situation is Newton's second law of motion.

Learn more about Newton's second law of motion here: https://brainly.com/question/3999427

#SPJ1

Answer:  If you want to know how to dress for church, something modest and comfortable should be fine. Generally, graphic tees that show off sports team logos or bands should never be worn to church. Solid-colored tops are fine, and even something with a pattern should be OK to wear.

Explanation:

The energy of this radiation is 4.58 x 10⁻¹⁹ joules.

Ionizing and non-ionizing categories of radiation are typically distinguished based on the energy of the radiated particles. Ionizing radiation carries energies greater than 10 eV, which is enough to ionize atoms and molecules and break chemical bonds. This distinction is important since these compounds differ significantly in how poisonous they are to living creatures. Ionizing radiation is typically produced by radioactive materials that release radiation in the form of photons, electrons, or positrons. Other sources include secondary cosmic rays that interact with Earth's atmosphere to produce muons, mesons, positrons, neutrons, and other particles, as well as X-rays from radiography examinations used in medicine.

Calculations:

wavelength = 434nm = 434 x 10⁻⁹m

planck's constant = h= 6.626 x 10 ⁻³⁴ J

E =?

by using the formula;

E = hc /λ

value for c is 3 x 10⁸ m/s

E is equal to (6.626 x 10 34 J)(3 x 108 m/s) / 434 x 109m.

E = 1.9878 x 10⁻²⁵ / 434 x 10⁻⁹m

E = 4.58 x 10⁻¹⁹ joules

To learn more about radiation,visit:

https://brainly.com/question/13934832

#SPJ4

Answer:

1036.5kg

...................

Gauss law explains that the electric flux is defined as the electric field multiplied by the area of the surface in a plane perpendicular to the field.

Mathematically,

Φ=Q ϵo

Where;

Q is enclosed charge

ϵo is the permittivity of the free space

In the case where the charge is moved outside the surface, the flux in the electric field becomes zero because the enclosed charge becomes zero. Thus, the electric field will change due to the movement outside the surface. The only instances where flux is kept constant are when it is moved within the surface or the enclosing object is changed.

To understand more about electric flux and its relationship with charges. Click, https://brainly.com/question/14789236

#SPJ4

In a transverse wave, the motion of the disturbance is perpendicular to the direction of the wave motion.

A wave is a disturbance that travels through a medium. Depending on the direction of movement of the individual particles relative to the direction of the propagation of the wave, waves can be divided into longitudinal wave and transverse waves.

A transverse wave is a type of wave in which the individual particles of the medium move in a perpendicular direction relative to the direction of wave propagation. This phenomenon can be observed on a water wave. If we place a floatable object on a rippled water surface, it tends to oscillate up and down. This is because the water molecules are also oscillating up and down, perpendicular to the direction of the wave.

Other examples of transverse waves include electromagnetic waves and seismic waves.

Learn more about transverse waves here:

https://brainly.com/question/13863548

#SPJ4

The earth's liquid outer core is the major cause of the earth’s magnetic field.

The magnetic influence on moving electric charges, electric currents, and magnetic materials is described by a magnetic field, a vector field. A force acting on a charge while it travels through a magnetic field is perpendicular to both the charge's motion and the magnetic field. The magnetic field of a permanent magnet attracts or repels other magnets as well as ferromagnetic elements like iron. A magnetic field that varies with location will also exert a force on a variety of non-magnetic materials by changing the velocity of those particles' outer electrons. Electric currents, like those utilised in electromagnets, and electric fields that change over time produce magnetic fields that surround magnetised things.

To learn more about magnetic field,visit:

https://brainly.com/question/11514007

#SPJ4

a)The charge per unit length (in C/m) exists on the copper rod is

3.34×10⁻¹² C/m

b) The electric flux through a cube is  0.018 N.m²/C

Electric field = it is a physical field that surrounded by electric charge particle and exert force on another charge particles.

Radius of copper rod = 1 cm. = 0.01m

The electric field strength = 3 N/C.

The electric field at 2 cm from the center of a long copper rod.

a)The charge per unit length (in C/m) exists on the copper rod.

The electric field at a point can be given as

E = λ/2πε₀r

where

λ is linear charge density

ε₀ is the permittivity in free space

r is the radius

λ = E*2πε₀r

    = 3 ×2×3.14×8.85×10⁻¹² ×2×10⁻²

λ = 3.34×10⁻¹² C/m

The charge per unit length (in C/m) exists on the copper rod is

λ = 3.34×10⁻¹² C/m

b) side of the cube is 5cm

charge enclosed inside rod is given by :

q =  λ L

using the equation of gauss law

Ф = q/ε₀

using this in the above equation we get

q(enclosed) = λ L/ε₀

q =  3.34×10⁻¹² C/m × 5× 10⁻²m / 8.85×10⁻¹²C²/N.m²

= 0.018 N.m²/C

the electric flux through a cube is  0.018 N.m²/C

a)The charge per unit length (in C/m) exists on the copper rod is

3.34×10⁻¹² C/m

b) The electric flux through a cube is  0.018 N.m²/C

To know more about electric charge :

https://brainly.com/question/8971780

#SPJ4

Answer:

Continental Rift

Explanation:

I had earth science in 2020-2021 my freshman year. Rifting can be caused when hot material from a mantle plume reaches the base of a continental plate and causes the overlying lithosphere to heat up. In addition to this the upwards movement of the plume against the base of the plate results in extensional forces which can cause rifting.

Hitting a magnet with a hammer cause the magnetism to be Physical disruption and vibration damage the material's order, demagnetizing it.

There are numerous methods for demagnetizing a magnet.

A magnet, as we know, has magnetic moments, which are the arrangements of molecules in a specific direction.

The hammer causes the magnetic poles of the magnet to point in opposite directions, causing the magnet to bend.

When we repeatedly hammer on a magnet, the magnetic dipoles inside the magnet are released from their ordered configuration.

Magnetism is known to be caused by the presence of magnetic moments.

As a result, when we hammer it, the dipoles are perturbed, lose their orientation, and magnetic moments cease to exist. As a result, the magnet will become demagnetized.

The force that magnets use to either attract or repel one another is known as magnetism.

Electric charges in motion are what generate magnetism. Every substance is made of small particles known as atoms.

Electrons, which are charged particles, are found in every atom. Electrons spin like tops around an atom's nucleus, or center. Their mobility causes an electric current to flow, causing each electron to act as a miniature magnet.

Another strongly magnetic substance must enter the magnetic field of an existing magnet in order to be magnetized. A magnet's magnetic field is the area of magnetic force that surrounds it.

An electric current can magnetize some compounds.

To learn more about magnetism, visit:

https://brainly.com/question/13026686

#SPJ4

The direction of the field the current creates at a point on the wall outside the frame to the right is horizontally towards you.

The current will flow from the bottom of the wire to the top if the magnetic field around a vertical electrical wire is counter clockwise in direction. A magnetic field, a vector field that describes the magnetic influence on moving electric charges, electric currents, and magnetic materials. When a charge moves through a magnetic field, a force that is perpendicular to both its own velocity and the magnetic field operates on it.

A permanent magnet's magnetic field pulls on ferromagnetic materials like iron and draws or repels other magnets. Since the direction and strength of a magnetic field can vary depending on the location, it can be mathematically described by a function that gives each point a vector.

To learn more about Electric wire , visit :

brainly.com/question/28196991

#SPJ4