the two figures shown are made of unit squares. what is the positive difference of the perimeters, in units?

Answer:

Fast Chicken, because it has a smaller IQR.

Step-by-step explanation:

Fast Chicken is able to estimate their wait time more consistently because it has a smaller interquartile range (IQR) compared to Super Fast Food. The IQR is a measure of the spread of the middle 50% of the data and is calculated as the difference between the third quartile (Q3) and the first quartile (Q1). The smaller the IQR, the more consistent the data is. In this case, the IQR for Fast Chicken is 4.5 (14.5-10) while the IQR for Super Fast Food is 7 (15.5-8.5). Therefore, Fast Chicken has a more consistent wait time estimate.

Range is a measure of the spread of the data, but it only considers the difference between the highest and lowest values in the data set. The range for Fast Chicken is 15 (20-5), and for Super Fast Food, it is 24 (27-3). Although Super Fast Food has a smaller range than Fast Chicken, it does not necessarily indicate that its wait time estimate is more consistent.

Therefore, the answer is Fast Chicken, because it has a smaller IQR.

Answer:

A

Step-by-step explanation:

because that’s what I got from doing my math because I was doing the math correctly and since I did it correctly I got the answer of .a so this is my absolutely amazing explanation.

Answer:

a. The triangular prism has 5 faces, 9 vertices, and 12 edges.

b. To find the volume of the packaging, we need to multiply the area of the base (an equilateral triangle) by the height of the prism.

The area of an equilateral triangle with side length 3.6 cm is given by:

$A = \frac{\sqrt{3}}{4} s^2 = \frac{\sqrt{3}}{4}(3.6\text{ cm})^2 \approx 5.270\text{ cm}^2$

So, the volume of the Toblerone packaging is:

$V = Ah = (5.270\text{ cm}^2)(21\text{ cm}) \approx 110.59\text{ cm}^3$

Therefore, the volume of the Toblerone packaging is approximately 110.59 cubic centimeters.

Interposition refers to the belief that a state has the right to intervene between the federal government and its citizens to protect them from unconstitutional laws, while nullification is the belief that a state has the power to declare federal laws null and void within its borders.

Interposition and nullification are two theories of state sovereignty that were debated during the early years of the United States. Interposition refers to the belief that a state has the right to interpose itself between the federal government and its citizens to protect them from unconstitutional laws.

On the other hand, nullification is the belief that a state has the power to declare federal laws null and void within its borders. The main difference between interposition and nullification is the extent of state power they propose.

Interposition allows a state to protect its citizens from unconstitutional federal laws, while nullification allows a state to effectively veto a federal law within its borders. While interposition has been recognized as a legitimate theory of state sovereignty.

Nullification has been largely discredited and is not recognized as a valid legal doctrine under the U.S. Constitution.


To know more about federal laws, refer here:

https://brainly.com/question/28498485#

#SPJ11

The probability that the next customer will pay with cash or a credit card is: 0.90

What is the probability?

The probability that the next customer will pay with cash or a credit card is the sum of the probabilities of these two events occurring.

The probability of the next customer paying with cash is the ratio of the number of customers who paid with cash to the total number of customers:

P(cash) = 122 / (122 + 14 + 4) = 0.870

Similarly, the probability of the next customer paying with a credit card is:

P(credit card) = 4 / (122 + 14 + 4) = 0.029

Therefore, the probability that the next customer will pay with cash or a credit card is:

P(cash or credit card) = P(cash) + P(credit card) = 0.870 + 0.029 = 0.899

Rounding this to the nearest hundredth, we get:

P(cash or credit card) ≈ 0.90 (rounded to the nearest hundredth)

To know more about probability, visit:

https://brainly.com/question/11234923

#SPJ1

The most specific conclusion that can be drawn from the given series is that it is convergent.

The Ratio Test is a common way of determining the convergence or divergence of an infinite series. It states that if the ratio of successive terms of a series converges to a limit less than one in absolute value, then the series is convergent.

In the case of the given series, it meets the conditions to use the ratio test, which means that the most specific conclusion that can be drawn is that the series is convergent. To explain this further, we need to examine what is meant by the condition that the series meets the ratio test.

First, we need to understand the definition of an infinite series. An infinite series is an expression of the form ∑an, where an is a sequence of numbers that has no upper bound. The limit of the sequence, as n tends to infinity, is referred to as the sum of the series. The ratio test states that the ratio of successive terms of a series converges to a limit less than one in absolute value.

In other words, if the ratio of successive terms of a series approaches zero as n tends to infinity, then the series is said to be convergent. This means that the most specific conclusion that can be drawn from the given series is that it is convergent. This is because the ratio of successive terms of the series converges to a limit less than one in absolute value, as required by the ratio test.

In conclusion, the most specific conclusion that can be drawn from the given series is that it is convergent. This is due to the fact that the ratio of successive terms of the series converges to a limit less than one in absolute value, which is the condition required by the ratio test for a series to be convergent.

See more about convergence at: https://brainly.com/question/30646523

#SPJ11

In option C, we can see that the equation is in vertex form.

What is parabola ?

A parabola is a symmetrical U-shaped curve formed by the graph of a quadratic function. It is a type of conic section that results from the intersection of a cone and a plane that is parallel to one of the sides of the cone. A parabola can also be defined as the set of points in a plane that are equidistant from a fixed point called the focus and a fixed line called the directrix. Parabolas have many applications in physics, engineering, and mathematics, including projectile motion, antenna design, and optimization problems.

According to the question:
The equation that reveals the minimum or maximum value of f(x) without changing the form of the equation is C f(x)=(x-2)²-16.

This equation is in vertex form, which is f(x) = a(x-h)² + k. In this form, the vertex of the parabola is at the point (h, k), and the value of "a" determines whether the parabola opens upwards or downwards.

In option C, we can see that the equation is in vertex form, where the vertex is (2, -16). Therefore, the minimum value of f(x) is -16, which occurs at x=2.

To know more about parabola visit:
https://brainly.com/question/21685473
#SPJ1

===================================================

Reason:

Dividing by 11 leads to a repeating fraction, so that rules out 16/11. The decimal value 1.45 doesn't repeat and is instead a terminating decimal.

It's a bit interesting that 16/11 = 1.454545... so if we were to round it, then 16/11 is approximately 1.45; however, 16/11 is not exactly 1.45

As for 131/90, that won't work either because 9 is a factor of 90. Dividing by 9 leads to a repeating fraction.

131/90 = 1.455555...

This rounds to 1.46

-------------

Here's one way to determine what fraction is equal to 1.45

1.45 = 1.45/1

1.45 = 145/100

1.45 = (29*5)/(20*5)

1.45 = 29/20

You can use a calculator or long division to see that 29/20 converts to 1.45

The horizontal distance between the base of the ladder and the wall is 29.34 feet.

What is trigonometry?

Trigonometry is a branch of mathematics that deals with the relationships between the sides and angles of triangles. It involves the study of the properties and functions of angles, as well as the relationships between these angles and the lengths of the sides of triangles. Trigonometry has many practical applications in fields such as engineering, physics, astronomy, and surveying, among others. Some common concepts in trigonometry include the sine, cosine, and tangent functions, as well as the Pythagorean theorem and the unit circle.

We can use trigonometry to solve this problem. Let x be the horizontal distance between the base of the ladder and the wall.

We know that the ladder is 30 feet long and forms an angle of 78° with the ground. Let's call the angle between the ladder and the wall θ.

Using trigonometry, we can write,

cos θ = x/30

We want to find x, so we can rearrange this equation to solve for x,

x = 30 cos θ

Now we just need to substitute the value of θ into this equation. We know that the ladder forms an angle of 78° with the ground, so the angle between the ladder and the wall is θ = 90° - 78° = 12°

Substituting this value into the equation, we get,

x = 30 cos 12°

Using a calculator, we can evaluate cos 12° to be approximately 0.9781. Multiplying this by 30, we get:

x ≈ 29.34

So the horizontal distance between the base of the ladder and the wall is approximately 29.34 feet. Rounded to the nearest hundredth of a foot, the answer is x ≈ 29.34 feet.

Learn more about the trigonometry here,

https://brainly.com/question/12151369

#SPJ1

The length is therefore shrinking at a rate of -541/3, or around -180.33 square inches per hour.

A rectangle is a flat, four-sided shape with parallel, equal-length opposite sides on each side. There are four right angles (90-degree angles). The distance between the two longer sides, also known as the longer sides or the longer edges, is the rectangle's length. The distance between the two shorter sides, also known as the shorter sides or the shorter edges, determines the rectangle's width. The perimeter of a rectangle is equal to the total of the lengths of all of its sides, and the area of a rectangle is equal to the product of its length and width.

given

Let A represent the rectangle's area, l its length, and w its width. So, we are aware of:

A = lw

By applying the derivative to time t, we obtain:

(d/dt) = dA/dt (lw)

l(dw/dt) + w(dl/dt) = dA/dt

dw/dt = 0 since the width is kept constant, which results in:

w(dl/dt) = dA/dt

We are informed that w = 3 in and that dA/dt = –541 in2/hour. By replacing these values, we obtain:

-541 = 3(dl/dt)

By calculating dl/dt, we obtain:

dl/dt = -541/3

The length is therefore shrinking at a rate of -541/3, or around -180.33 square inches per hour.

To know more about rectangle visit:

https://brainly.com/question/29123947

#SPJ1

The average number of exclusive relationships Duke students have been in is between 2.972 and 3.428.

So, we can estimate with 90% confidence that the average number of exclusive relationships Duke students have been in is between 2.972 and 3.428.

Learn more about average number

brainly.com/question/16956746

#SPJ11

The answer is 'The indicator variable and square footage would be combined to get the interaction term'

In an equation or formula, a variable is a symbol or letter that stands in for an unknowable or varying quantity or value.

To create an interaction term in this regression model, we would multiply the indicator variable (1 if the house is within 3 miles of campus, 0 if not) by the square footage. This would allow us to examine whether the effect of square footage on house price is different for houses that are within 3 miles of campus compared to those that are not.

So, the answer is: The indicator variable and square footage would be combined to get the interaction term.

To know more about variables, visit:

https://brainly.com/question/112703

#SPJ1

Answer:

third option

Step-by-step explanation:

(4x + 3)² = 18 ( take square root of both sides )

4x + 3 = ± [tex]\sqrt{18}[/tex] = ± [tex]\sqrt{9(2)}[/tex] = ± ([tex]\sqrt{9}[/tex] × [tex]\sqrt{2}[/tex] ) = ± 3[tex]\sqrt{2}[/tex] ( subtract 3 from both sides )

4x = - 3 ± 3[tex]\sqrt{2}[/tex] ( divide both sides by 4 )

x = [tex]\frac{-3+3\sqrt{2} }{4}[/tex] , x = [tex]\frac{-3-3\sqrt{2} }{4}[/tex]

Answer: :)

Step-by-step explanation:

2x + x = 21

Lets x = the amount of time Lilly played

2x = 2 * x = the amount of time Paul played (2 times the amount Lilly played)

:)

Under the null hypothesis, this test statistic follows a t-distribution with (n nap + n coffee - 2) degrees of freedom and the p-value is less than the significance level of 0.05,

To determine if there is sufficient evidence that taking a nap promotes faster reaction time than drinking coffee, we can perform a two-sample t-test assuming equal variances. The null hypothesis is that there is no difference in the mean reaction times between the nap and coffee groups, while the alternative hypothesis is that the mean reaction time for the nap group is less than the mean reaction time for the coffee group.

Let's assume that we have collected data on reaction times for both the nap and coffee groups, and have calculated their sample means ( X nap and X coffee) and sample standard deviations (snap and  s coffee). We can then calculate the pooled standard deviation using the formula:

[tex]Sp = sqrt(((nnap - 1) * snap^2 + (ncoffee - 1) * scoffe^2) / (nnap + ncoffee - 2))[/tex]

where n nap and n coffee are the sample sizes for the nap and coffee groups, respectively. We can then calculate the test statistic using the formula:

t = (X nap - X coffee) / (Sp * sqrt(1/nnap + 1/ncoffee))

Under the null hypothesis, this test statistic follows a t-distribution with (n nap + n coffee - 2) degrees of freedom. We can calculate the p-value for this test statistic using a t-distribution table or a calculator. Alternatively, we can use Python or R to perform the test and calculate the p-value.

If the p-value is less than the significance level of 0.05, we can reject the null hypothesis and conclude that there is sufficient evidence that taking a nap promotes faster reaction time than drinking coffee. Otherwise, we fail to reject the null hypothesis.

After calculating the appropriate test statistic, we would save it into variable p2.C.Stat, rounding the value to two decimal places. We would then calculate the p-value for this test statistic and save it into variable p2.C.P, rounding the value to three decimal places.

It's important to note that the assumptions of the two-sample t-test, such as normality and equal variances, should be checked before performing the test. If these assumptions are not met, alternative tests such as the Wilcoxon rank-sum test may be more appropriate.

To know more about degrees of freedom click here:

brainly.com/question/16254305

#SPJ4

The model will be as follows: y = b0 + b1x1 + b2x2 + u

To write a model that allows the variance of u to differ between men and women, the best option is to use the heteroscedasticity model. This model will enable the variances to differ between the genders without depending on other factors.

The model will be as follows: y = b0 + b1x1 + b2x2 + u, Where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model. However, this model does not allow the variance of u to differ between men and women.

To achieve this, we need to modify the model to allow the variance of u to differ between men and women. This can be done by using the weighted regression model. The model will be as follows: y = b0 + b1x1 + b2x2 + u, where y = dependent variable, b0 = constant or intercept, b1 and b2 are the coefficients for the independent variables x1 and x2, u = error term for the model.

The weights can be represented as: wi = 1/σ^2i, where: wi = weight for observation, iσi = standard deviation of the ith observation. This model will allow the variance of u to differ between men and women without depending on other factors.

To know more about variance refer here:

https://brainly.com/question/13708253

#SPJ11

Using graphs,

The ordered pair, (6,15) represents here the cost of 6 pounds of noodles that is $15.

A structured representation of the data is all that the graph is. It assists us in comprehending the info. Data are the numerical details gathered by observation. Data is a derivative of the Latin term datum, which means "something provided."

Data is continuously gathered through observation once a research question has been formulated. After that, it is arranged, condensed, and categorised before being graphically portrayed.

Here in the question,

As we can see that the graph is a relation between the number of noodles in pounds and the cost of noodles in dollars has been given and compared.

So, as per the question,

The ordered pair that represents here the cost of 6 pounds of noodles is (6,15).

As, from the graph:

When noodles in pounds is 6, cost in dollars is 15.

To know more about graphs, visit:

https://brainly.com/question/17267403

#SPJ9

The complete question is:

the points on the graph show how much chee pays for different amounts of noodles, complete the statement about the graph

Answer:

Step-by-step explanation:

The formula for the volume of a cylinder is:

V = πr^2h

where V is the volume, r is the radius, and h is the height.

We are given that V = 1607 and r = 4. We can plug these values into the formula and solve for h:

1607 = π(4^2)h

1607 = 16πh

h = 1607/(16π)

h ≈ 25.5

Therefore, the height of the cylinder is approximately 25.5 units. Note that we rounded the answer to one decimal place since the radius was given to one decimal place.

Answer:3/7

Step-by-step explanation:

The distance of road is 12 kilometres

Ratio is  shows how many times one number contains another. It is also the comparison of two quantities of the same units that indicates how much of one quantity is present in the other quantity

How to determine this

When total distance = 20 kilometres

The ratio of road distance to footpath distance = 3:2

So, the total ratio = 3+2 = 5

To determine the work out of road distance

Let x represent the work out of the road distance

x =3/5 * 20

x = 60/5

x = 12 kilometres

Therefore, the distance of road is 12 kilometres

Read more about Ratio

https://brainly.com/question/29754679

#SPJ1

The machine part's maximum possible size is 13.5 + 0.07, or 13.57 millimeters.

Two mathematical expressions are shown to be equal in an equation, which is a declaration that is frequently denoted by the equals symbol (=). It implies that the amounts or values represented by both formulations are the same. Equations are a useful tool for representing the relationships between variables and for problem-solving because they allow you to identify the values of the unknown variables that the equation requires. They are frequently applied in the domains of math, physics, engineering, and other sciences as well as in daily activities like budgeting, time management, and cooking.

given

The following absolute value equation could be used to calculate the machine part's height's maximum and minimum values:

0.07 for |height - 13.5|

The machine part's minimum possible size is 13.5 minus 0.07, or 13.43 millimeters.

The machine part's maximum possible size is 13.5 + 0.07, or 13.57 millimeters.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

In triangle ABC as per given measurements the measure side length BC is equal to 7.26cm (Rounding to three significant figures).

In triangle ABC,

Measure of angle A = 36 degrees

Measure of angle B = 90 degrees

length of AB = 8.7cm

Use trigonometry to solve for the length of BC.

First, Measure of angle C,

In triangle ABC,

Measure of (Angle A + Angle B + Angle C ) = 180

⇒ 36 + 90 + Measure of angle C = 180

⇒ Measure of angle C = 54 degrees

Now , use the sine function to solve for BC,

sin(C) = opposite side /hypotenuse

Substitute the values we have,

⇒ sin(54) = BC/AB

⇒BC = AB × sin(54)

⇒ BC = 8.7 × 0.834

⇒ BC = 7.2558

Rounding to three significant figures, we get,

BC ≈ 7.26 cm.

Therefore, the measure of length BC in triangle ABC is equal to 7.26cm.

Learn more about triangle here

brainly.com/question/13664253

#SPJ4

The above question is incomplete, the complete question is:

ABC is a right-angled triangle. Angle B = 90. Angle A = 36. AB = 8.7 cm. Work out the length of BC. Give your answer correct to 3 significant figures.

Answer:

Step-by-step explanation:

1/5(-25) + 16/8

-5 + 2 = -3

Option A

The two triangles in the following diagram are congruent. The proofs are mentioned below.

SSS (Side-Side-Side)

If all the three sides of one triangle are equivalent to the corresponding three sides of the second triangle, then the two triangles are said to be congruent by SSS rule.

SAS (Side-Angle-Side)

If any two sides and the angle included between the sides of one triangle are equivalent to the corresponding two sides and the angle between the sides of the second triangle, then the two triangles are said to be congruent by SAS rule.

ASA (Angle-Side- Angle)

If any two angles and the side included between the angles of one triangle are equivalent to the corresponding two angles and side included between the angles of the second triangle, then the two triangles are said to be congruent by ASA rule.

AAS (Angle-Angle-Side) [Application of ASA]

AAS stands for Angle-Angle-Side. When two angles and a non-included side of a triangle are equal to the corresponding angles and sides of another triangle, then the triangles are said to be congruent.

AAS congruence can be proved in easy steps.

RHS (Right angle- Hypotenuse-Side)

If the hypotenuse and a side of a right- angled triangle is equivalent to the hypotenuse and a side of the second right- angled triangle, then the two right triangles are said to be congruent by RHS rule.

Hence, the two triangles in the following diagram are congruent.

Learn more about Congruence:

https://brainly.com/question/20521780

#SPJ1

Answer: Let x be the man's income.

He spent 58% of his income, which is 0.58x.

The amount of money left is the remaining 42% of his income, which is 0.42x.

According to the problem, 0.42x = GH210.00.

Solving for x, we get:

x = GH210.00 / 0.42

x = GH500.00

Therefore, the man's income is GH500.00.

Step-by-step explanation:

Matt has 6 dimes coins and 24 nickel coins.

The solution to this math problem is as follows:

Let the number of dimes be x Matt has 4 times as many nickels as dimes therefore the number of nickels is 4x. The combined value of the coins is 180 cents. We know that a nickel is worth 5 cents and a dime is worth 10 cents. Therefore we can write an equation:10x + 5(4x) = 180

Simplifying,10x + 20x = 180

30x = 180

x = 6

Therefore there are 6 dimes and 4 * 6 = 24 nickels.

To learn more about "Combined value": brainly.com/question/14293955

#SPJ11

Answer:

AB=8.1 and B=29.6

Step-by-step explanation:

1) To find the measure of AB, use the law of cosines

[tex]c^2=4^2+7^2-2(4)(7)cos(90)[/tex]

[tex]c^2 = 16+49 -56cos(90)\\c^2= 65\\c=8.1[/tex]

2) Use law of sines to find the measure of B

[tex]\frac{8.1}{sin(90)} =\frac{4}{sin(B)}[/tex]

B=29.6

The LCM of  x² - x and 3 - 3x is given by the  expression 6x² −3x³  −3x.

Equatiοns are statements in mathematics that have twο algebraic expressiοns οn either side οf the equals (=) sign.

It shοws that the expressiοns printed οn the left and right sides have an equal relatiοnship.

In any mathematical equatiοn, we have LHS = RHS (left hand side = right hand side).

Equatiοns can be sοlved tο find the value οf an unknοwn variable that represents an unknοwn quantity.

LCM of unkone terms are given by their product:

(x² - x) × (3 - 3x)

= (3x² -  3x³) - (3x -3x²)

= 3x² -  3x³ - 3x + 3x²

= 6x² −3x³  −3x

Thus, the LCM of  x² - x and 3 - 3x is given by the  expression 6x² −3x³  −3x.

learn more about equations click here:

brainly.com/question/2972832

#SPJ1

The expression (a⁰) × (1/0²) when evaluated has an undefined value

The expression (a^0) × (1/0²) involves two operations: exponentiation and multiplication.

Firstly, any number raised to the power of 0 is equal to 1. Therefore, a^0 is equal to 1, no matter what the value of "a" is.

Next, the expression 1/0² involves division by 0, which is undefined. Division by 0 is undefined in mathematics because it leads to inconsistencies

Therefore, the value of the entire expression is undefined or "not a number" (NaN), since the second term involves division by 0.

In summary, the expression (a^0) × (1/0²) is undefined and cannot be evaluated.

Read more about expression at

https://brainly.com/question/15775046

#SPJ1

The sum of the first $20$ terms of the arithmetic sequence is $420$.

In an arithmetic sequence, the sum of the second and eighth terms is $5$, and the product of the fourth and fifth terms is also $5$. The sum of the first $20$ terms of this sequence can be calculated using the following formula:

Sum of the first $20$ terms = $20$/2($a_1 + a_{20})$, where $a_1$ is the first term of the sequence and $a_{20}$ is the twentieth term of the sequence.

Therefore, we need to find the first term of the sequence and the twentieth term of the sequence. To find the first term, we use the following equation:

$5 = a_2 + a_8$, where $a_2$ is the second term and $a_8$ is the eighth term.

To find the twentieth term, we use the following equation:

$5 = a_4 \times a_5$, where $a_4$ is the fourth term and $a_5$ is the fifth term.

Solving both equations, we get $a_2 = 1$ and $a_{20} = 40$. Then, we can calculate the sum of the first $20$ terms of the sequence:

Sum of the first $20$ terms = $20$/2($1 + 40$) = $420$.

Therefore, the sum of the first $20$ terms of the arithmetic sequence is $420$.

To Know more about arithmetic sequence, refer here:

brainly.com/question/12108818#

#SPJ11