The unit weight of soil is 17.3 KN/m3. The moisture content of this soil is 17% when the degree of saturation is 60%.

Answer:

See explanation

Explanation:

Truthfully, this answer can vary depending on the CAD program you are choosing to use. Generally, you go to your model tree (this has been on the left hand side of the screen in all of the CAD software I have used) and click the sketch or feature to edit. In some programs this is a left click and in others this is a right click. When the feature is correctly selected a menu should appear with the option to edit feature/sketch/definition/etc. Select this option and you should be able to edit what you wanted to.

It is false that Boolean datatype is used for an attribute that takes a single character value.

In computer science, the Boolean is basically a data type that has one of two possible values (usually said as true and false) which is intended to represent the two truth values of logic and Boolean algebra.

Person can utilize the Boolean Data Type to encompass two-state values including one as true/false, yes/no, or on/off.

The default value of Boolean is usually False . Boolean values are not grabbed as numbers, and the stored values are not necessarily to be equivalent to numbers.

Thus, the given statement is false.

For more details regarding datatype, visit:

https://brainly.com/question/179886

#SPJ1

The circuit that may not be used to determine the value of the resistor is (Option A). See the attached image.

A resistor is a component of an electronic circuit that restricts or regulates the passage of electrical current.

Resistors can also be used to supply a fixed voltage to an active device such as a transistor.

A resistor is a two-terminal electrical component that offers resistance to current flow. Resistors are commonly employed in electrical circuits to reduce current flow, split voltages, impede transmission signals, and bias active parts.

Individual electronic components such as resistors, transistors, capacitors, inductors, and diodes are linked by electrical wires or traces through which electric current can pass to form an electronic circuit.

Learn more about circuits:

https://brainly.com/question/28039167
#SPJ1

Answer:

• Dismount the diode from the circuit board (PCB or veroboard)

• Switch on the DMM and connect its positive (red) probe to anode terminal of a diode as well as a negative (black) probe to the cathode terminal.

• The DMM must be in parameters of continuity.

• If a beep sound is heard, the diode is functioning.

[tex]{}[/tex]

Of the three types of hazard controls – engineering, administrative, and personal protective equipment (PPE) – PPE is the last line of defense: True.

OSHA is simply an abbreviation for occupational safety and health administration that was created under the Occupational Safety and Health Act, so as to develop work-safety standards for workers and providing precautionary measures against all workplace hazards.

Generally, there are three types of hazard controls and these include the following:

PPE is an acronym for personal protective equipment and it can be defined as a terminology that is used to denote any piece of equipment which offer protection to different parts of the body while working in a potentially hazardous environment.

Also, some examples of personal protective equipment (PPE) used to protect the different parts of the body are:

According to occupational safety and health administration (OSHA), the use of a faulty personal protective equipment (PPE) should be the last line of defense.

Read more on PPE here: https://brainly.com/question/19131588

#SPJ1

Complete Question:

Of the three types of hazard controls – engineering, administrative, and personal protective equipment (PPE) – PPE is the last line of defense. True or False?

Answer:

Cross pattern, according to the internet

Answer:

it is B trust me I know thank yiu

The one that describes braking from a brake chamber containing a power spring is a spring applied and air-released service brake. The correct option is D.

Spring brakes, unlike service brakes, are not air applied. They apply when air pressure is released from the brake chamber and release when air pressure is restored. Spring brakes and service brakes use different types of brake chambers.

The braking power of spring brakes is determined by how well the brakes are adjusted. If the brakes are not properly adjusted, neither the regular nor the emergency/parking brakes will function properly.

A spring applied and air-released service brake is the one that describes braking from a brake chamber containing a power spring.

Thus, the correct option is D.

For more details regarding spring brake, visit:

https://brainly.com/question/28099237

#SPJ1

Grade 5 bolts have 3 marks identifying on the head

This is further explained below.

Generally,  When looking for the correct bolt, it is essential to check that the grades of the bolts that are currently being used are compatible with one another.

There is no difference between Grade 5 Bolts and Metric.

8 Bolts. The presence of three marks on the head of a Grade 5 bolt is often all that is required for successfully identifying the bolt.

In conclusion, The head of a grade 5 bolt will have three distinguishing markings on it.

Read more about  Grade 5 bolts

https://brainly.com/question/14900098

#SPJ1

A tack weld must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.​

A wielder can be defined as an individual who is saddled with responsibility of joining two or more metals together by wielding, especially through the use of an electrode or gas wielding method.

During the process of wielding, sparks and minute metallic objects are produced, which are usually hazardous to both the wielder and other workers within the vicinity.

In Mechanical Engineering, a tack weld should be correctly applied to the metals that are being wielded, so that they are strong enough to hold the assembly without interfering with the finished welding.​

Read more on welding here: https://brainly.com/question/21049525

#SPJ1

Complete Question:

A ____ must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.​

a-forged weld

b-stick weld

c-tack weld

d-rod weld

Answer:

A bread board

Explanation:

It has identical holes where every component is connected using jumper wires

[tex]{}[/tex]

Answer:

the perimeter of a square room is 48m. what is the area of the room? What cost will incur if the rate of carpeting the room is Rs. 10 per m square

The answer choices that have been shown by research to be generally not as effective a method for studying and the methods that are more likely to produce illusions of competence in learning are:

This refers to the act or process of reading material in order to gain new knowledge about a topic and to retain the information in long-term memory.

Hence, we can see that from the complete text, there are different options given and the results of research that showed that they are not very effective for studying and they are:

Read more about studying here:

https://brainly.com/question/1077241

#SPJ1

a) From the the given data:

The 2020 GDP / capita for Ni is 1.94

The 2020 GDP / capita for United States is 63.23

The equivalent CO2 emissions per equivalent US$ of GDP for Ni/geria

is 1.265

The equivalent CO2 emissions per equivalent US$ of GDP for United States is 0.218

c) From the typical trend predictions, the equivalent CO2 emission per equivalent US$ for the year 2035 is 513.59 T g C / yr

GDP per capita is solved by gross domestic product GDP divided by population

GDP per capita for Ni/geria

= 400 / 206

= 1.94

GDP per capita for United States

= 20930 / 331

= 63.23

Equivalent CO2 emissions per equivalent US$ of GDP is gotten by

= CO2 emissions / GDP

Ni/geria

= 506 / 400

= 1.265

United States

= 4570 / 20930

= 0.218

Given that CO2 increment per year is 0.1% / yr. From 2020 to 2035 is 15 years and this shows increment of 15 * 0.1 = 1.5%

At 2020 it was 506 Tg C / yr with 1.5% increment we have

= 506 * 1.5%

= 7.59

The increment is 506 + 7.59 = 513.59 Tg C / yr

Therefore the equivalent CO2 emission per equivalent US$ for the year 2035 is 513.59 Tg C / yr

Read more on GDP per capita here: https://brainly.com/question/18414212

#SPJ1

It is right to state that Technician B is correct. A piston compresses the air in the cylinder, causing it to become very hot. The diesel is then atomized in the injectors and sprayed into the heated air as a mist. The heated air ignites the gasoline quickly, creating ignition.

As the fuel injectors drive air and fuel into the combustion chamber, compression occurs in the internal combustion cylinders.

The mixture ignites, and the piston is driven by the expansion of the burning gases in the cylinders, converting the energy from combustion into mechanical energy that propels the vehicle.

Learn more about Piston Compression:
https://brainly.com/question/10072505
#SPJ1

For many cutting-edge systems based on fast neutrons, heavy liquid metals (HLMs), such as lead-bismuth eutectic (LBE) and pure lead, are popular candidate coolants.

LBE is employed, in instance, in Mol (Belgiumgroundbreaking )'s MYRRHA fast reactor, which can run in either critical mode or as a sub-critical accelerator-driven system. Key thermal-hydraulic features of these systems, such as the proper cooling of fuel components, must be evaluated with a heavy emphasis on safety.

This flow scenario presents a challenge for computational fluid dynamics (CFD) models, such as those used to relate the turbulent transport of momentum and heat, due to the complicated geometry and low Prandtl number of the LBE (Pr 0.025). Therefore, accurate experimental information is required for validation.

Learn more about bismuth:

https://brainly.com/question/7622627

#SPJ4

The complete questions is ''what is the thermal-hydraulic study of the lbe-cooled fuel assembly in the myrrha reactor: experiments and simulations''.

When welding a T-joint, the reason that the arc need to be directed more toward the bottom workpiece is so that a person can hinder or stop any form of undercutting of the given top piece.

The Positioned flat of the flat position weld, often known as a "downhand" position, is the simplest and frequently the first weld that new pupils learn.

The welder places the metals to be welded flat and moves the electric arc across them while it travels across the workpiece in a way that is said to be an  horizontal orientation.

Therefore, based on the above, When welding a T-joint, the reason that the arc need to be directed more toward the bottom workpiece is so that a person can hinder or stop any form of undercutting of the given top piece.

Learn more about welding from

https://brainly.com/question/9450571

#SPJ1

Answer:

F. Completion date.

Explanation:

The completion date cannot be determined exactly before the job; it is also irrelevant to Painting and Finishing.

If both the ram air input and drain hole of the pitot system become blocked, the indicated airspeed will: a) increase during a climb.

A ram air input can be defined as an air intake system which is designed and developed to use the dynamic air pressure that is created due to vehicular motion, or ram pressure, in order to increase the static air pressure within the intake manifold of an internal combustion engine of an automobile.

This ultimately implies that, a ram air input allows a greater mass-flow of air through the engine of an automobile, thereby, increasing the engine's power.

In conclusion, indicated airspeed will increase during a climb when both the ram air input and drain hole of the pitot system become blocked.

Read more on pilots here: https://brainly.com/question/10381526

#SPJ1

Complete Question:

If both the ram air input and drain hole of the pitot system become blocked, the indicated airspeed will

a) increase during a climb

b) decrease during a climb

c) remain constant regardless of altitude change

The Displacement of the Barge whose length 65m and 12m wide- 4375.8 tonnes(a) and the Draught in Fresh Water- 5.61 m(b).

Let density of sea-water be- 1020kg/m3

Displacement of the barge= Density of sea water* Volume Displaced

                                         =1020* (12*65*5.5)

                                         =4375800 kg

                                         =4375.8 tonnes

Let Density of Fresh Water- 1000kg/m3

Draught in Fresh Water= Density of sea water/Density of water *draught in sea water

1020/1000 *5.5

Draught in Fresh Water= 5.61 m

Learn more about Archimedes' Principle here:

https://brainly.com/question/787619

#SPJ4

Iron has a BCC crystal structure, an atomic radius of 0.124 nm and atomic weight of 55.85g/mol, so the theoretical density will be 7.8 g/cm³.

In a molecule, an atomic radius is equal to half the distance between neighboring atoms of the same element.

When we travel down a group, the atomic radius increases, and when we move in a period from left to right, it decreases. The valence electrons being in the same outermost shell at various times explains this. Moving from left to right, the atomic number rises during the same time interval, increasing the effective nuclear charge. Elemental atomic radius decreases as attractive forces rise.

The given values in the question are :

Radius=0.124 nm and,

Atomic weight=55.85 g/mol

For BCC, Z=2

r=0.124 nm=0.124×[tex]10^{-9}[/tex] m

=0.124×[tex]10^{-9}[/tex]×10² cm

ρ= (Z×M)/a³ N₀

a=4r/√3

=(2×55.85 g.[tex]mol^{-1}[/tex])/(4×0.124×[tex]10^{-7}[/tex]/√3)×6.022×[tex]10^{23}[/tex]

ρ=7.8 g/cm³.

Hence, we get the density as 7.8g/cm³.

To get more information about atomic radius :

https://brainly.com/question/13607061

#SPJ1

Sandpaper.

Rubble.

Pyramid.

Wrinkled.

Marbled.

Answer:

the value of the best I love it was thinking too tough be a good night love motorcycle

The program for the array of integers is illustrated below.

Program :

n=int(input())

l=[]

for i in range(n):

  l.append(int(input("Enter a number into an integer array : ")))

s=int(input("Enter the number to be searched: "))

def search(l,s):

  l=sorted(l)

  if s in l:

      return "Yes"

  else:

      return "No"

print(search(l,s))

Inputs and outputs :

For test case 1 : (Number found)

Input : 5

Enter a number into an integer array : 61

Enter a number into an integer array : 72

Enter a number into an integer array : 89

Enter a number into an integer array : 42

Enter a number into an integer array : 54

Enter the number to be searched: 42

Ouput : Yes

For test case 2 : (Number not found)

Input : 3

Enter a number into an integer array : 99

Enter a number into an integer array : 84

Enter a number into an integer array : 3

Enter the number to be searched: 46

Ouput : No

Learn more about programs on:

https://brainly.com/question/16397886

#SPJ1

Answer:

me

Explanation:

Answer:

1. Alleviate: to make pain/suffering less severe.

2. Strenuous: requiring much energy and effort.

3. Revolutionize: to overthrow the established government; to change fundamentally.

4. Repetitive: doing or saying the same thing multiple times.

5. Prosthetics: a device designed to replace a missing body part, or make a part work better.

6. Infrastructure: the fundamental facilities and systems serving a country, city, or another area, including the services and facilities necessary for its economy to function.

Explanation:

The origin of elements are÷ carbon,hydrogen and oxygen. i think soooo......✌

Structured business problem is being identified here. An organizational structure serves to facilitate the achievement of goals and objectives by the organization as well as the effective and efficient completion of tasks by personnel.

An organizational structure is a type of framework that specifies how certain tasks are to be find out in order to achieve the objectives of an organization. Obligations, rules, and roles may be a part of these activities. information is transferred across layers of the organization is likewise supervised by its organizational structure. The sole control, partnership, corporation, and S corporation are the four most popular business structures. workers will profit from structure because it'll give clarity, manage prospects, refine decision- timber, and ensure thickness. Organizational charts also delegate responsibility, streamline workflow, and guarantee the timely completion of crucial activities.

Learn more about structure here-

https://brainly.com/question/10730450

#SPJ4