The unstable species that exists at the maximum of each energy curve, as reactants are converted to intermediates and products, is called the transition state, and the energy required to form this species from the reactants is called the activation energy for the reaction.
The transition state of a reaction is an unstable species that represents the highest energy point on the energy profile of a reaction. It is the point at which the reactants are partially converted to products and the energy has not yet been released. This unstable species is only present for a very short time and is often referred to as the “rate-determining step” as its stability dictates how quickly the reaction can take place.
The activation energy of a reaction is the minimum energy required for the reaction to take place. It is the energy required to reach the transition state and is the sum of the energies of the reactants and the energy barrier of the reaction.
In conclusion, the transition state of a reaction is the unstable species that exists at the maximum of each energy curve, as reactants are converted to intermediates and products, and the activation energy of a reaction is the energy required to reach the transition state and initiate the reaction.
To know more about activation energy, refer here:
https://brainly.com/question/10354272#
#SPJ11
A mixture of 2 gases has a total pressure 4. 85 atm. The partial pressure of gas A is 2. 36 atm. What is the partial pressure of gas B
The partial pressure of gas B in the mixture is 2.49 atm.
To find the partial pressure of gas B in the mixture, we need to use the equation for Dalton's law of partial pressures, which states that the total pressure of a mixture of gases is equal to the sum of the partial pressures of each individual gas.
Mathematically, the equation is:
Total pressure = Partial pressure of gas A + Partial pressure of gas B + ... + Partial pressure of gas N
Where N is the total number of gases in the mixture.
We can rearrange this equation to solve for the partial pressure of gas B:
Partial pressure of gas B = Total pressure - Partial pressure of gas A
Substituting the values given in the question, we get:
Partial pressure of gas B = 4.85 atm - 2.36 atm = 2.49 atm
Therefore, the partial pressure of gas B in the mixture is 2.49 atm.
To know more about pressure click here:
brainly.com/question/15175692
#SPJ4
The ionic charges of cadmium and sulfide in Cds are_____ and _____ respectively. a. 2+, 1+ b. 2+, 2- c. 2+, 1- d. 3+, 2+
The ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.
What is an Ionic Bond?An ionic bond is an attraction between two oppositely charged ions. They're commonly made up of metals and nonmetals. The metal gives electrons to the nonmetal in an ionic bond, resulting in a complete outer shell for the nonmetal and a full valence shell for the metal. The result is a tightly bound, crystalline structure. The electrostatic interaction between the ions holds the compound together.
Cadmium (Cd) is a metallic element, and sulfide (S) is a nonmetallic element. CdS is an ionic compound that is created when cadmium cations ([tex]Cd^{2+}[/tex]) and sulfide anions ([tex]S^{2-}[/tex]) combine to form a crystalline lattice structure. The ionic charge of cadmium is 2+, while the ionic charge of sulfide is 2-. Hence, the ionic charges of cadmium and sulfide in CdS are 2+ and 2- respectively.
To know more about ionic bond:
https://brainly.com/question/8286090
#SPJ11
the specific heat capacity of a metal can be determined by heating it in a water bath, pouring the hot metal into cool water and measuring the change in temperature. list to assumptions that are made in measuring the initial temperature of the metal.
Two assumptions are made in measuring the initial temperature of the metal in a specific heat capacity experiment: (1) the temperature of the water bath is uniform and equal to the temperature recorded by the thermometer, and (2) the heat loss from the hot metal to the surroundings is negligible.
In a specific heat capacity experiment, the metal is heated in a water bath to a known temperature, and then quickly transferred to a container of cool water, where the change in temperature is measured. The initial temperature of the metal is assumed to be equal to the temperature of the water bath, as measured by a thermometer. This assumption relies on the assumption that the temperature of the water bath is uniform, with no temperature gradients.
Another assumption made is that heat loss from the hot metal to the surroundings is negligible. In reality, some heat energy will be transferred from the hot metal to the surrounding air or container, leading to a loss of heat and an inaccurate measurement of the initial temperature. These assumptions can introduce errors in the calculation of the specific heat capacity of the metal, which may affect the accuracy of subsequent calculations.
To know more about specific heat, refer here:
https://brainly.com/question/11297584#
#SPJ11
what is the relative rate of diffusion between oxygen gas and carbon dioxide? oxygen gas is x the rate of carbon dioxide
The relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8. Diffusion is the process of spreading out or scattering a substance, particularly molecules that move randomly inside a fluid or gas.
When substances are dispersed, they shift from areas of high concentration to areas of low concentration. The rate of diffusion determines how quickly or slowly a substance will spread. In a gas or liquid, the molecules diffuse more quickly when the temperature is high.
The ratio of two molecules' diffusion rates is known as the relative rate of diffusion. The relative rate of diffusion can be determined using Graham's law of diffusion. According to this law, the rate of diffusion of a gas is inversely proportional to the square root of its molecular weight.
The relative rate of diffusion of two gases can be determined using this law.Let's look at oxygen gas and carbon dioxide now. The molecular weight of oxygen gas is 32 g/mol, while that of carbon dioxide is 44 g/mol.
The relative rate of diffusion can be determined using Graham's law of diffusion:
Relative rate of diffusion of oxygen gas:√(44/32)
Relative rate of diffusion of oxygen gas: 1.2
Relative rate of diffusion of carbon dioxide:√(32/44)
Relative rate of diffusion of carbon dioxide: 0.8
Therefore, the relative rate of diffusion between oxygen gas and carbon dioxide is 1:0.8.
To know more about rate of diffusion, refer here:
https://brainly.com/question/2010859#
#SPJ11
the air in a lungs person consists of 0.177 mol of gas particles at 310k and 101.3 kpa pressure. what is the volume of the air?
The volume of the air in the lungs is 4.91 L.
To answer this question, we can use the Ideal Gas Law which is:
PV = nRT
where P = pressure, V = volume, n = number of moles, R = universal gas constant, and T = temperature.
First, we need to rearrange the equation to solve for volume.
Therefore,
V = nRT/P
Where V is the volume, n is the number of moles, R is the universal gas constant and T is the temperature, and P is the pressure.
So the formula for the volume of air in the lungs can be given as:
V = nRT/P = (0.177 mol)(8.31 J/mol*K)(310 K)/(101.3 kPa)
Using this formula and plugging in the values from the problem, we get:
V = (0.177 mol)(8.31 J/mol*K)(310 K)/(101.3 kPa)V
= 4.91 L
So, the volume of the air in the lungs is 4.91 L.
Learn more about air pressure here:
https://brainly.com/question/15189000#
#SPJ11
Indicate if each of the following errors is systematic, random or human mistake based on how they affect the results of the lab: Each solution absorbs carbon dioxide from the air, making them slightly more acidic [Choose < Estimating the amount of each salt to dissolve in the distilled water [Choose) Spilling some salt during the transfer into the centrifuge tube [Choose < Inconsistent volume in drops of Indicator [Choose ] Using dirty test tubes Human mistake
Each solution absorbs carbon dioxide from the air, making them slightly more acidic: This is a systematic error, as it affects all the solutions in the same way, leading to a consistent bias in the results.
How to estimate the amount of each salt to dissolve in the distilled wate?Estimating the amount of each salt to dissolve in the distilled water: This could be either a random or systematic error, depending on the method used for estimating the amount of salt. If the method is accurate but subject to random variation, then the error is random. If the method consistently overestimates or underestimates the amount of salt, then the error is systematic.
What are ways of keeping test tubes?Spilling some salt during the transfer into the centrifuge tube: This is a random error, as it affects only some of the samples and can vary in magnitude from sample to sample. Inconsistent volume in drops of Indicator: This is a random error, as it affects only some of the samples and can vary in magnitude from sample to sample. Using dirty test tubes: This is a human mistake, as it is caused by improper handling of the equipment and can be avoided by following proper laboratory procedures.
To know more about carbon dioxide visit:-
brainly.com/question/3049557
#SPJ1
a 3.83 g piece of limestone contains 2.57 g of c a c o 3 . based on these results, what is the mass percentage of c a c o 3 in limestone?
The mass percentage of CaCO₃ in the 3.83 g piece of limestone is 66.8%.
This can be calculated by taking the mass of CaCO₃ (2.57 g) and dividing it by the total mass of limestone (3.83 g) and multiplying by 100.
To calculate this, you need to take the mass of CaCO₃ (2.57 g) and divide it by the total mass of limestone (3.83 g).
This gives you a decimal value, which you then need to multiply by 100 to get the percentage value.
In this case, 2.57/3.83 = 0.668, which multiplied by 100 gives you 66.8%. This is the mass percentage of CaCO₃ in the limestone.
To know more about mass percentage click on below link:
https://brainly.com/question/16885872#
#SPJ11
americium-241 is an isotope used in smoke detectors. what is the subatomic composition of a neutral atom of 241am?
A neutral atom of americium-241 (241Am) contains 95 protons, 146 neutrons, and 95 electrons. This isotope has an atomic number of 95 and an atomic mass of 241.
The protons and neutrons form the nucleus of the atom, which is surrounded by a cloud of electrons.
The number of protons determines the identity of the atom, while the number of neutrons can vary among atoms of the same element.
In americium-241, there are 95 protons and 146 neutrons, making it an isotope.
The electrons of a neutral atom of 241Am are arranged in energy levels or shells that are located around the nucleus.
The first shell, closest to the nucleus, contains 2 electrons, the second shell contains 8 electrons, the third shell contains 18 electrons, and the fourth shell contains 32 electrons.
The total number of electrons for 241Am is 95, which corresponds to the atomic number of 95.
The protons and neutrons in the nucleus are held together by the strong nuclear force. This force is very strong compared to the electrostatic forces that hold the electrons to the nucleus.
The stability of an atom of 241Am is due to the strong nuclear force and the balance of protons and neutrons. The number of protons must match the number of electrons to achieve a balanced state, or a neutral atom.
In americium-241, the atomic number (95) is the same as the number of electrons, which gives it a balanced state.
Americium-241 is a radioactive isotope and has many uses, including smoke detectors. Its stability, atomic number, and subatomic composition all make it an ideal choice for a wide variety of applications.
to know more about americium-241 refer here:
https://brainly.com/question/17558255#
#SPJ11
in which scenario would we be unable to treat the first and second ionization of a diprotic acid as completely separate reactions?
The first and second ionization of a diprotic acid cannot be treated as completely separate reactions when the reaction is taking place in an environment with a fixed pH.
The second ionization of the acid is dependent on the concentration of the ions produced from the first ionization.
If the pH is fixed, then the concentration of the first ionization is also fixed, so the second ionization will not occur completely independently.
For example, a diprotic acid such as oxalic acid can be completely ionized in two steps. In the first ionization, the hydrogen ions of the oxalic acid are replaced with hydroxide ions, forming the oxalate ion:
H2C2O4 + 2H2O → H3O+ + HC2O4–
In the second ionization, the oxalate ion is further dissociated, forming two separate anions and hydronium ions:
HC2O4– + H2O → H3O+ + C2O4–2
However, in an environment with a fixed pH, the second ionization will not take place as the concentration of oxalate ions from the first ionization is fixed.
Therefore, the two ionizations must be treated together in order to accurately predict the final concentrations of the products.
to know more about diprotic acid refer here:
https://brainly.com/question/9434046#
#SPJ11
Answer:
The first ionization constant is greater than the second ionization constant by only a factor of 10.
Explanation:
The two ionization constants must differ by a factor of at least 20 in order to treat the first and second ionizations as chemically (and mathematically) distinct.
A piece of chalk, CaCO3, has an initial mass of 43. 5 grams. The mass of the chalk decreased to 39. 6 grams after use. How many moles of chalk were used?
0.039 moles of Chalk were used.
To find the number of moles of chalk used, we need to first calculate the change in mass of the chalk:
Change in mass = initial mass - final mass
Change in mass = 43.5 g - 39.6 g
Change in mass = 3.9 g
Next, we need to convert the change in mass to moles of CaCO3:
Molar mass of CaCO3 = 40.08 g/mol + 12.01 g/mol + 3(16.00 g/mol) = 100.09 g/mol
Moles of CaCO3 used = (Change in mass of CaCO3) / (Molar mass of CaCO3)
Moles of CaCO3 used = 3.9 g / 100.09 g/mol
Moles of CaCO3 used = 0.039 moles
Therefore, 0.039 moles of CaCO3 were used.
To know more about moles click here:
brainly.com/question/20486415
#SPJ4
what is the empirical formula for a 100-g sample containing 87.42 g of nitrogen and 12.58 g of hydrogen?
Answer: The empirical formula for a 100-g sample containing 87.42 g of nitrogen and 12.58 g of hydrogen is NH₃.
The empirical formula of a chemical compound refers to the simplest positive integer ratio of the atoms present in the compound. In general, the molecular formula and the empirical formula may be different. However, the empirical formula is always a part of the molecular formula.
A molecule's empirical formula can be used to calculate its molecular formula when the molecule's molar mass is known.
How to calculate the empirical formula?
Step 1: Calculate the number of moles of each element.
Step 2: The number of moles of each element is divided by the smallest number of moles to obtain the mole ratio.
Step 3: Multiply the mole ratio obtained in step 2 by a whole number to get the simplest whole number ratio. The calculation of the empirical formula of a compound with known composition involves the determination of the relative numbers of atoms of each element in the compound. It is computed using the following formula:
Empirical formula = molecular formula / greatest common factor
Learn more about empirical formula here:
https://brainly.com/question/14044066#
#SPJ11
what is the maximum mass of s8 s 8 that can be produced by combining 88.0 g 88.0 g of each reactant?
Answer: The maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.
The balanced equation for the reaction is: S8 (s) + 8O2 (g) → 8SO2 (g)
The limiting reactant is the reactant that limits the amount of product formed. To find the limiting reactant, we have to calculate the moles of each reactant. The reactant that produces fewer moles of product is the limiting reactant.
The molar mass of sulfur (S8) is:
Molar mass of S8 = 8 x Atomic mass of S= 8 x 32.07 g/mol= 256.56 g/mol
The molar mass of oxygen (O2) is:
Molar mass of O2 = 2 x Atomic mass of O= 2 x 16.00 g/mol= 32.00 g/mol
The moles of each reactant are:
moles of S8 = 88.0 g ÷ 256.56 g/mol= 0.343 mol
moles of O2 = 88.0 g ÷ 32.00 g/mol= 2.75 mol
From the balanced equation, 1 mole of S8 reacts with 8 moles of O2 to produce 8 moles of SO2.
Therefore, the maximum moles of S8 that can be produced is: Maximum moles of S8 = 0.343 mol
The mass of S8 that can be produced is:
Mass of S8 = number of moles x molar mass= 0.343 mol x 256.56 g/mol= 88.0 g (rounded to one decimal place)
Hence, the maximum mass of S8 that can be produced by combining 88.0 g of each reactant is 88.0 g.
Learn more about reactant here:
https://brainly.com/question/17096236#
#SPJ11
cacl2 is a salt that forms as the result of what type of bond? multiple choice ionic nonpolar polar hydrogen covalent
CaCl2 is a salt that forms as the result of ionic bonds. An ionic bond is a bond that forms between a metal and a nonmetal when they react. One of the atoms will be electronegative, while the other will be electropositive.
When an atom is electropositive, it is more likely to give up its electrons, whereas an electronegative atom is more likely to take up an electron or electrons.
A covalent bond is formed between two nonmetal atoms when they react. Unlike an ionic bond, which occurs between a metal and a nonmetal, a covalent bond occurs between two nonmetal atoms.
The electrons are shared in a covalent bond, with each atom receiving one. As a result, both atoms have a stable number of electrons in their outermost shell.
A bond in which one atom is more electronegative than the other and thus attracts electrons more strongly is known as a polar bond.
The positive end of the molecule is the less electronegative end, and the negative end is the more electronegative end.
A hydrogen bond is a weak bond that occurs between a hydrogen atom and an electronegative atom such as nitrogen, oxygen, or fluorine.
Despite being weak, hydrogen bonds are crucial in many biological processes, such as the formation of DNA. When two atoms are identical, the bond between them is nonpolar.
In the case of a covalent bond, this occurs when the two atoms share electrons equally.
to know more about ionic bond refer here:
https://brainly.com/question/11527546#
#SPJ11
why would the (z,z)-1,4-diphenyl-1,3-butadiene not be a likley product of the synthesis in this type of experiment regardless of starting material
In this type of experiment regardless of starting material, it is unlikely to be a product of the synthesis because it requires a Diels-Alder reaction.
Diels-Alder reaction is not typically observed in these experiments. The Diels-Alder reaction requires the presence of a dienophile and a diene, and the starting material does not contain these molecules. Therefore, it is not possible for the (z,z)-1,4-diphenyl-1,3-butadiene to be a product of the reaction.
A Diels-Alder reaction is a cycloaddition reaction, which requires the participation of two compounds: a dienophile and a diene. A dienophile is a compound that has two double bonds that are ortho, meta, or para to each other, while a diene is a compound that has two double bonds that are conjugated. The starting material in this experiment does not contain a dienophile or a diene, so the Diels-Alder reaction cannot occur.
Therefore, the (z,z)-1,4-diphenyl-1,3-butadiene is not a likely product of the synthesis in this type of experiment regardless of starting material. The presence of the necessary reactants for a Diels-Alder reaction is required for the formation of this product, and the starting material does not contain these molecules.
To know more about the Diels-Alder reaction refer here:
https://brainly.com/question/30751490#
#SPJ11
which substances are strong acids? [select all that apply] group of answer choices hf hi hcl h2so4 hno3 hbr hclo hclo2 hclo3 hclo4 h2s ch3cooh h3po4 nh3 nh4cl koh fecl3 h2n2 ca(oh)2 ch3nh2
Strong acids are substances that have a high affinity for protons, meaning that they can donate or accept protons in order to form an acid-base equilibrium. The following substances are strong acids: HF, HI, HCl, H2SO4, HNO3, HBr, HClO, HClO2, HClO3, HClO4, H2S, CH3COOH, H3PO4, NH3, NH4Cl, KOH, FeCl3, H2N2, Ca(OH)2, and CH3NH2.
HF is a hydrogen halide and is the strongest of the acids listed above. It is used in industrial applications as a strong oxidizing agent. HI is another hydrogen halide, and it is used in the production of organic compounds. HCl, also known as hydrochloric acid, is a strong acid that is commonly used in the chemical industry. H2SO4 is a strong mineral acid used in the production of fertilizers and dyes.
HNO3 is a strong oxidizing agent and is used in the production of fertilizers and explosives. HBr is a strong acid used in the production of organic compounds. HClO, HClO2, HClO3, and HClO4 are strong oxidizing agents that are used in the chemical industry.
Know more about Strong acids here:
https://brainly.com/question/16749233
#SPJ11
calculate the ph of a formic acid solution that contains 1.35% formic acid by mass. (assume a density of 1.01 g/ml for the solution.)
Formic acid (HCOOH), the weak organic acid present in red ants that is responsible again for sting in their bite, with a pH of 2.87 in a 1.35 M solution.
How do you determine pH?The ph is a useful tool for illustrating how basic or acidic a solution is. By using the inverse logarithm of a hydronium content, or pH = -log[H3O+], we may determine the pH of the solution.
How can you determine a formic acid solution's pH?Formic acid has a dissociation constant constant of 1.8 10 4. Formic acid (HCOOH) has a concentration of 0.050 M. [HCOOH] = 0.050 - x, where x is the amount of H+ that separates from HCOOH (formic acid). A 0.050 M strong acid solution has a pH of 2.52.
To know more about organic visit:
https://brainly.com/question/15603370
#SPJ1
how many moles of potassium chloride is needed to make a 3m of 0.6L solution
The moles of potassium chloride needed to make 3M of 0.6L solution is 1.8 moles.
What are moles?The mole designates 6.02214076×10²³ units, which is a very large number. The number of atoms discovered through experimentation to be present in 12 g of carbon-12 was originally used to define the mole. In honour of the Italian physicist Amedeo Avogadro, the number of units in a mole is also known as Avogadro's number or Avogadro's constant (1776–1856). Equal volumes of gases under identical conditions should contain the same number of molecules, according to Avogadro's hypothesis. This idea helped establish atomic and molecular weights and gave rise to the concept of the mole.
What is Avogadro's number?Avogadro's number or Avogadro's constant refers to the quantity of units contained in one mole of any substance. The value is 6.022140857×10²³. Depending on the nature of the reaction and the substance, the units may be electrons, ions, atoms, or molecules.
It links the quantity of substance to the number of particles, bridging the gap between the macroscopic and microscopic worlds.
To know more about Moles, visit:
https://brainly.com/question/26416088
#SPJ1
a laboratory analysis of aspirin determined the following mass percent composition: c 60.00% h 4.48% o 35.52% find the empirical formula
The empirical formula of aspirin is C₂H₂O.
Based on the mass percent composition given in the student question, we can find the empirical formula of aspirin. First, assume a 100g sample. This means there are 60g of C, 4.48g of H, and 35.52g of O. Next, convert these masses to moles by dividing by the atomic mass of each element:
C: 60g / 12.01g/mol ≈ 5 moles
H: 4.48g / 1.01g/mol ≈ 4.44 moles
O: 35.52g / 16g/mol ≈ 2.22 moles
Now, divide each mole value by the smallest mole value to find the mole ratio:
C: 5 / 2.22 ≈ 2.25 ≈ 2
H: 4.44 / 2.22 ≈ 2
O: 2.22 / 2.22 ≈ 1
Therefore, the empirical formula of aspirin is C₂H₂O.
Know more about aspirin here:
https://brainly.com/question/30764511
#SPJ11
what is the ph for a titration of 25.0 ml of 25.0 ml of 0.365 m acetic acid 0.365 m acetic acid when 10.3 ml of 0.432 m when 10.3 ml of 0.432 m naoh have been added?
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
The pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added can be calculated using the following steps:
1. Calculate the moles of acetic acid (CH₃COOH) and sodium hydroxide (NaOH) before the reaction:
- Moles of CH₃COOH = volume × concentration
= 25.0 mL × 0.365 mol/L
= 9.125 mmol
- Moles of NaOH = volume × concentration
= 10.3 mL × 0.432 mol/L = 4.4456 mmol
2. Determine the moles of acetic acid and sodium hydroxide remaining after the reaction: Since acetic acid and sodium hydroxide react in a 1:1 ratio, the limiting reactant will be NaOH.
- Moles of CH₃COOH remaining = 9.125 mmol - 4.4456 mmol = 4.6794 mmol - Moles of NaOH remaining = 0 mmol (all NaOH is consumed in the reaction)
3. Calculate the concentration of acetic acid and acetate ion (CH₃COO-) after the reaction:
- [CH₃COOH] = moles of CH₃COOH remaining / total volume
= 4.6794 mmol / (25.0 mL + 10.3 mL)
= 0.12998 mol/L
- [CH₃COO-] = moles of NaOH consumed / total volume
= 4.4456 mmol / (25.0 mL + 10.3 mL)
= 0.12346 mol/L
4. Calculate the pH using the Henderson-Hasselbalch equation:
pH = pKa + log([CH₃COO-] / [CH₃COOH]) pKa of acetic acid is 4.76, so:
pH = 4.76 + log(0.12346 / 0.12998) ≈ 4.69
Therefore, the pH for a titration of 25.0 mL of 0.365 M acetic acid when 10.3 mL of 0.432 M NaOH have been added is approximately 4.69.
Learn more about titration here:
https://brainly.com/question/2728613#
#SPJ11
what is the name of the alcohol that would produce 2,3-dimethylbut-2-ene (figure 2) through dehydration?
The alcohol that would produce 2,3-dimethylbut-2-ene through dehydration is 2,3-dimethylbutan-2-ol.
Dehydration of an alcohol involves the removal of a molecule of water from the alcohol, resulting in the formation of an alkene. In this case, we are looking for an alcohol that, upon dehydration, will produce 2,3-dimethylbut-2-ene.
The structure of 2,3-dimethylbut-2-ene suggests that it has a branched structure with two methyl groups on the second carbon. This means that the alcohol we need must have this same structure before dehydration.
The alcohol that fits this description is 2,3-dimethylbutan-2-ol. Upon dehydration, this alcohol would lose a molecule of water from the hydroxyl group on the second carbon, resulting in the formation of 2,3-dimethylbut-2-ene. Therefore, the correct answer is 2,3-dimethylbutan-2-ol.
To learn more about methyl groups, refer below:
https://brainly.com/question/13408577
#SPJ11
calculate the equilibrium concentration of nh 3 . a mixture of 0.060 m n 2 and 0.040 m h 2 is heated to a temperature where k c
The calculated equilibrium concentration of NH3 is 0.0185 M.
To calculate the equilibrium concentration of NH3 in a mixture of 0.060 M N2 and 0.040 M H2 at a temperature where Kc = 3.5 x 10^-³, we can use the following equilibrium equation:
N2(g) + 3H2(g) ⇌ 2NH3(g)
The balanced equation tells us that for every mole of N2 that reacts, two moles of NH3 will be produced. Similarly, for every three moles of H2 that reacts, two moles of NH3 will be produced. Let's assume that at equilibrium, x moles of NH3 are formed. Then, the equilibrium concentrations of N2, H2, and NH3 will be given as follows:
[NH3] = x M[N2] = (0.060 - x) M[H2] = (0.040 - 3x) M
Now, we can use the equilibrium constant expression (Kc) to solve for x:
Kc = [NH3]2 / [N2][H2]3.5 x 10^-3 = x2 / [(0.060 - x)(0.040 - 3x)3]
On solving the above equation, we get:x = 0.0185 M
Therefore, the equilibrium concentration of NH3 is 0.0185 M.
More on equilibrium concentration: https://brainly.com/question/18366526
#SPJ11
at a very low temperature known as absolute zero, there is no random molecular motion. at absolute zero, would diffusion occur?
To summarize, at absolute zero, the energy needed for diffusion to occur is completely absent, and the molecules are completely frozen. So diffusion does not take place.
Diffusion is a process of net movement of molecules from an area of high concentration to an area of low concentration. The process of diffusion requires some form of energy, and at absolute zero, the energy is completely eliminated. This means that there would be no potential for molecules to move from a region of higher concentration to one of lower concentration. Therefore, diffusion does not occur at absolute zero. At absolute zero, molecules stop vibrating and the atoms cease all motion. All molecular motion is frozen and stopped, so diffusion is not possible. Diffusion requires energy to move molecules, which is not available at absolute zero. The energy needed to drive molecules to move is not present, so molecules cannot move.
Learn more about Diffusion: https://brainly.com/question/94094
#SPJ11
Please help me i having trouble ill mark you brainlist if correct
There are 41 g H3PO3 formed during a reaction. How many moles of P2O3 are required? (H3PO3: 82 g/mol) P2O3 + 3H2O ---> 2H3PO3
The number of mole of diphosphorous trioxide, P₂O₃ required for the reaction is 0.25 mole
How do i determine the mole of P₂O₃ required?To obtain the number of mole of diphosphorous trioxide, P₂O₃ required, we shall begin by calculating the mole in 41 g of H₃PO₃. This is shown below:
Mass of H₃PO₃ = 41 grams Molar mass of H₃PO₃ = 82 g/mol Mole of H₃PO₃ =?Mole = mass / molar mass
Mole of H₃PO₃ = 41 / 82
Mole of H₃PO₃ = 0.5 mole
Haven obtained the mole of H₃PO₃, we shall determine the number of mole of P₂O₃ required. Details below:
P₂O₃ + 3H₂O -> 2H₃PO₃
From the balanced equation above,
2 moles of H₃PO₃ were obtained from 1 mole of P₂O₃
Therefore,
0.5 mole of H₃PO₃ will be obtain from = (0.5 mole × 1 mole) / 2 mole = 0.25 mole of P₂O₃
Thus, we can conclude that the number of mole of P₂O₃ required is 0.25 mole
Learn more about mole:
https://brainly.com/question/13375719
#SPJ1
what is the molecular geometry of co2 ? enter the molecular geometry of the molecule. view available hint(s)for part b part c what is the molecular geometry of seh2 ? enter the molecular geometry of the molecule. view available hint(s)
The molecular geometry of CO₂ is linear, and the molecular geometry of SeH₂ is bent.
The molecular geometry of a molecule is the arrangement of its atoms in space, taking into account the number of atoms, electron pairs, and lone pairs on the central atom. The molecular geometry of a molecule is determined by its bonding, shape, and size.
Molecular geometry is also known as the shape of molecules. CO₂ is a linear molecule with a carbon atom in the center and two oxygen atoms on either side. Each oxygen atom has two non-bonding pairs of electrons, and the carbon atom has no non-bonding electrons. As a result, the molecular geometry of CO₂ is linear.
SeH₂ is a bent molecule with a central selenium atom and two hydrogen atoms. The lone pair of electrons on the selenium atom causes the molecule to be bent, giving it a shape similar to that of water. The molecular geometry of SeH₂ is bent, with a bond angle of approximately 98 degrees.
Learn more about molecular geometry here.https://brainly.com/question/29650255
#SPJ11
what is the general form of the solubility product constant expression? how does the solubility quotient, qsp, differ? how do you calculate the value of qsp if given the solution concentration of two ions.
The general form of the solubility product constant (Ksp) expression is: Ksp = [A]^m[B]^n. By simply substituting the ion concentrations of the solution into the Ksp expression we can solve the Qsp.
The solubility quotient (Qsp) is similar to Ksp but represents the ion product in a solution, regardless of whether the solution is at equilibrium or not. If Qsp < Ksp, the solution is unsaturated and more solute can dissolve. If Qsp = Ksp, the solution is at equilibrium and the solution is saturated. If Qsp > Ksp, the solution is supersaturated and the excess solute will precipitate out of solution. To calculate Qsp, simply substitute the ion concentrations of the solution into the Ksp expression and solve for Qsp.
To know more about solubility quotient, here
brainly.com/question/28170449
#SPJ4
what mass of na2so4 must be dissolved in enough water to give 350. ml of a 0.325 m solution of this compound?
Answer: The mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.
To determine the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound, use the formula:
mass = molarity x volume x molar mass
First, calculate the number of moles of Na2SO4 present in the solution:
n = M x Vn
= 0.325 mol/L x 0.350 Ln
= 0.11375 mol
Next, calculate the mass of Na2SO4 present in the solution using the molar mass of Na2SO4:
m = n x MMm
= 0.11375 mol x 142.04 g/molm
= 16.154 g
Therefore, the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.
Learn more about solvent dissolution here:
https://brainly.com/question/2364287#
#SPJ11
if a dozen donuts weighs 285g, how much does a mole of donuts weigh? (there are 12 donuts in a dozen).
A mole of donuts would weigh 3.42 kg, as a dozen donuts weigh 285 g and a mole is 6.022 x 1023 donuts. To calculate this, you need to multiply the weight of a dozen donuts by the number of donuts in a mole.
First, you need to calculate the weight of a single donut. Since there are 12 donuts in a dozen, divide the weight of a dozen (285 g) by 12 to get the weight of a single donut, which is 23.75 g.
Then, you need to multiply the weight of a single donut (23.75 g) by the number of donuts in a mole (6.022 x 1023) to get the weight of a mole of donuts. This is equal to 3.42 kg.
To know more about mole click below:
https://brainly.com/question/20486415
#SPJ11
if 53.8 grams of alumnium carbine reacts with sodium oxide, how many grams of aluminum oxide will there be
The mass of aluminum oxide produced is 152.6 grams.
we need to use the balanced chemical equation for the reaction between aluminum carbide and sodium oxide:
2 Al₄C₃ + 12Na₂O → 8 Al₂O₃ + 6Na₂CO₃
From the equation, we can see that for every 2 moles of Al₄C₃ that react, we get 8 moles of Al₂O₃ as a product. Therefore, we need to convert the given mass of Al₄C₃ to moles, and then use the mole ratio to calculate the mass of Al₂O₃ produced.
First, let's convert the mass of Al₄C₃ to moles:
53.8 g Al₄C₃ × (1 mol Al₄C₃/143.96 g Al₄C₃)
= 0.373 mol Al₄C₃
Now we can use the mole ratio to calculate the moles of Al₂O₃ produced:
0.373 mol Al₄C₃ × (8 mol [tex]Al_{2[/tex][tex]O_{3/2}[/tex] mol Al₄C₃) = 1.492 mol Al₂O₃
Finally, we can convert the moles of Al₂O₃ to grams:
1.492 mol Al₂O₃ × (101.96 g Al₂O₃/mol)
= 152.6 g Al₂O₃
To know more about aluminum oxide here
https://brainly.com/question/9496279
#SPJ4
an electrolyte solution . . . question 6 options: a) contains dissolved metals. b) contains non-polar molecules. c) is aqueous. d) contains ions. e) has free electrons in solution.
An electrolyte solution is one that contains ions. The correct option is d.
An electrolyte solution is one that can conduct an electric current. It contains charged particles or ions, which are what allow the solution to conduct an electric current. The following options can be eliminated as incorrect because they don't define electrolyte solution: a) contains dissolved metals b) contains non-polar molecules e) has free electrons in solution. Therefore, the correct option is (d) contains ions.Learn more about electrolyte solutions: https://brainly.com/question/14654936
#SPJ11
suppose you want to prepare a buffer with a ph of 4.42 using formic acid. what ratio of [sodium formate]/[formic acid] do you need to make this buffer? formic acid has a ka of 1.8x10-4.
This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formates]/[formic acid] to be 49.23:1.
Explanation:
To prepare a buffer with a pH of 4.42 using formic acid, you need to determine the ratio of [sodium formate]/[formic acid].
A buffer solution is a solution that can resist changes in pH, even when subjected to acid or base. The buffer solution comprises a weak acid or a weak base with its conjugate base or acid, respectively.
Suppose you want to prepare a buffer with a pH of 4.42 using formic acid, with a Ka of 1.8x10^-4. Find the ratio of [sodium format]/[formic acid]. Here, we can use the Henderson-Hasselbalch equation, which is:
pH = pKa + log ([A-] / [HA])
Here, [A-] represents the conjugate base concentration, and
[HA] represents the weak acid concentration.
Rearranging the above equation gives:
log([A-]/[HA]) = pH - pKa putting values gives:
log([A-]/[HA]) = 4.42 - (-log 1.8x10^-4) lo([A-]/[HA]) = 4.42 + 3.74log([A-]/[HA]) = 8.16log([A-]/[HA]) = 1.74
Now, taking antilog of both sides: [A-]/[HA] = 10^1.74[A-]/[HA] = 49.23:1
This ratio shows that to prepare a buffer with a pH of 4.42 using formic acid, you require the ratio of [sodium formate]/ [formic acid] to be 49.23:1.
To know more about Formic acid, refer here:
https://brainly.com/question/28169167#
#SPJ11