to show the electron configuration for an atom, when would it be better to use an orbital notation than to use a written configuration with numbers, letters, and superscripts? when the aim is to use less space

Answers

Answer 1

The aim is to use less space while demonstrating the distribution of electrons in shells

If you want to depict how an atom's electrons are scattered across its subshells, an orbital notation is more suited.

This is due to the fact that some atoms have unique electronic configurations that are not readily apparent from textual configurations.

How does electron configuration work?

The placement of electrons in orbitals surrounding an atomic nucleus is known as electronic configuration, also known as electronic structure or electron configuration.

What sort of electron arrangement would that look like?For instance: You can see that oxygen contains 8 electrons on the periodic table. These 8 electrons would fill in the following order: 1s, 2s, and finally 2p, according to the aforementioned fill order. O 1s22s22p4 would be oxygen's electron configuration.

learn more about electronic configuration here

https://brainly.com/question/26084288

#SPJ4


Related Questions

a chemist determines by measurements that moles of iodine solid participate in a chemical reaction. calculate the mass of iodine solid that participates. round your answer to significant digits

Answers

Answer: The answer is 5.076 g of iodine solid.

Explanation:

be sure to answer all parts. draw bond-line structural formulas (not lewis structures) for all the constitutional isomers that have the given molecular formula. c3h7cl window open cl at c-1 draw structure ... cl at c-2

Answers

The compound C3H7Cl chloropropane has two constitutional isomers: 1-chloropropane and 2- chloropropane as shown in the picture.

Isomerism is the phenomenon in which distinct compounds with the same chemical formula exist side by side.Isomerism can be divided into two main subcategories, each of which has a different definition. Stereoisomerism and structural isomerism are the two main forms.In C3H7Cl we can only observe only 2 isomers. formula will be the same but the positioning of chlorine will change. More than 2 isomers cannot be obtained because propane only has 3 carbon atom. naming will start from the position of carbon atom on which chlorine is attached, therefore 3-chloropropane does not exist.

so we can observe only two isomers of C3H7Cl by position chlorine on C-1 and C-2 atom.

Learn more about Stereoisomerism here:

https://brainly.com/question/10682984

#SPJ4

how much water should be added to 28 ml of 15​% alcohol solution to reduce the concentration to ​14%?

Answers

The amount of water that should be added to 28 ml of 15​% alcohol solution to reduce the concentration to ​14% is: 2 ml

To solve this problem, the formula and the procedure that we have to use is:

c1 * v1 = c2 * v2

Where:

c1= concentration of the concentrated solutionv1 = volume of the concentrated solutionc2 = concentration of the diluted solutionv2 = volume of the diluted solution

Information about the problem:

c1 = 15%v1=28 mlc2 = 14%v2=?amount of water should be added=?

Applying the dissolution of concentrations formula and clearing the volume of the diluted solution (v2) we get:

c1 * v1 = c2 * v2

v2 = (c1 * v1)/ c2

v2 = (15% * 28 ml)/ 14%

v2= 30 ml

In order to know how much water should be added we have to subtract 28 ml from the volume of the diluted solution:

amount of water should be added = v2 - v1

amount of water should be added = 30 ml - 28 ml

amount of water should be added = 2 ml

What is a solution?

In chemistry a solution is known as a homogeneous mixture of two or more components called:

Solvent: it usually is in a major amount than the soluteSolute: it usually is in less amount than the solvent

Learn more about chemical solution at: brainly.com/question/13182946

#SPJ4

How do I do this gas phase equilibrium problem?

Answers

The equilibrium constant is the ratio of the reactants to the products which is 2.

What is equilibrium constant?

The equilibrium constant shows the extent to which the reactants are converted into products. The equation of this reaction could be written from the number of molecules of the reactants.

Let the reactants be A and B and the product C, the reaction equation thus becomes;

The equilibrium constant is the ratio of the reactants to the products which is 2.

Learn more about equilibrium constant:https://brainly.com/question/10038290

#SPJ1

Use the periodic table above to determine which of the following elements has 4 valence electrons as a neutral atom. (1 pt)
*
1 point
Magnesium (Mg, #12)
Lithium (Li, #3)
Silicon (Si, #14)
Sulfur (S, #16)

Answers

Hello, the answer is Silicon, it has four valence electrons, lithium has one and magnesium has one, and sulfur has 6. Meaning the only answer would be silicon, Si

The average human adult requires 2000 kcal/day from food consumption. Calculate
how many kcal are required for one year. [1 kcal = 1000 calories], [1 calorie = 4.2
joules of energy].
2,200

Answers

The kcal required for one year is 730kcal (kilo calories).

A calorie is a unit of energy measurement. Typically, the energy content of meals and beverages is determined in terms of calories. You must consume fewer calories each day than your body uses up in order to lose weight. On the other hand, in order to gain weight, you must eat more calories than you burn.

The daily caloric needs of adult women range from 1,600 to 2,200. Estimates for men range from 2,000 to 3,200 per day. The low end of the range may be ideal for you if you move very little or not at all during the day. If you are very active throughout the day, the high end of the range can better match your needs. The number of calories we require decreases as we age.

The kcal required for one year is:

2000 X 365 days= 730000 calories.

so as 1Kcal= 1000 calories

73000cal= 730Kcal.

To learn more about calories refer to: https://brainly.com/question/22374134

#SPJ9

Which of the following is not a unit of volume?

Answers

Answer:

Cm2 Is not a unit of volume.

Explanation:

Hope this helps!

Please mark as brainliest if correct!

infrared and raman spectra of magnesium ammonium phosphate hexahydrate ( struvite ) and its isomorphous analogues . i . spectra of protiated and partially deuterated magnesium potassium phosphate hexahydrate

Answers

Magnesium potassium phosphate hexahydrate and a number of its deuterated counterparts were studied for their Fourier transform infrared and Raman spectra. By contrasting the spectra obtained at the boiling point of liquid nitrogen with those obtained at ambient temperature and by examining the spectra of a succession of partially deuterated MgKPO4

What is Infrared and raman spectroscopy ?

Raman and infrared spectroscopy both investigate how radiation interacts with molecular vibrations, but they do so in different ways depending on how the photon energy is delivered to the molecule by altering its vibrational state.

While IR spectroscopy depends on a change in the dipole moment, Raman spectroscopy depends on a change in the polarizability of a molecule. In contrast to IR spectroscopy, which measures the absolute frequencies at which a sample absorbs light, Raman spectroscopy measures the relative frequencies at which a sample scatters light.

Learn more about Spectroscopy here

https://brainly.com/question/17036549

#SPJ4

Which of the following rocks are composed of nonmineral matter?
granite
coal
rock salt
conglomerate
gneiss
shale

Answers

Answer:

yes

Explanation:

I can't think

suppose that 4.67 g of a silver salt ( agx ) is dissolved in 715.0 ml of water. a current of 2.48 a , applied for 1430 s , is required to plate out all of the silver in solution. what is the mass percentage of silver in the salt?

Answers

Ag^t + e^- ------> Ag

I = 2.48 A

t = 1430 s

q = It = 2.22×1180 = 3729.6

ne- = q/F = 3729.6/96485 = 0.03+

What is mass percentage ?

The mass percent is calculated by dividing the mass of the compound or solute by the mass of the element or solute. A percent is obtained by multiplying the result by 100. The mass percent formula is (mass of element in 1 mole of compound / mass of 1 mole of compound) x 100 to determine the amount of an element in a compound.

Learn more about Mass percentage here:

https://brainly.com/question/26150306

#SPJ4

3. What would the following two activities lead to: *
a. Planting more trees
b. Prohibiting fishing during breeding season
O Decreased Biodiversity
Biodiversity will remain unaffected
O Biodiversity will increase

5 MINS TILL DUE

Answers

The following activities of planting more trees and prohibiting fishing during the breeding season will lead to maintain biodiversity, which means the biodiversity will remain unaffected.

Biodiversity describes the huge variety of life on Earth. It can be used to refer to all of the species in one region or ecosystem. Biodiversity refers to every living thing, including plants, bacteria, animals, and humans. It is the variation among the living organisms.

A large number of  plant species results in greater variety of crops. It results in the natural sustainability for all the life forms. Reforestation or planting more trees helps in the increase of the primary production, reduce the susceptibility and results in the increase of ecological resistance, like climate changes, etc.

Aquaculture can greatly impact the biodiversity. It is important to manage it to maintain it. Prohibiting fish farming or fishing during breeding season will help maintain the biodiversity there is no decline in fish species. Overfishing also affects the genetic diversity.

To learn more about biodiversity,

brainly.com/question/16810649

#SPJ1

HOW MANY GRAMS ARE IN 43.12 KG? WHAT IS THE UNIT?

Answers

Answer:43.12 KG = 43,120 grams

Explanation:1 kilogram is equal to 1,000 grams.

Answer:

43120 g

Explanation:

1 kg = 1000 g

43.12 = 1000(43.12) g

1000(43.12) = 43120

The unit is g because we are converting to grams, and the abbreviation for grams is g.

∴ 43.12 kg = 43120 g

the burning of fossil fuels for energy in the modern era of life on earth is resulting in a significant increase in total co2 concentration in earth’s atmosphere. however, the ratio of 14c to 12c is decreasing. why is this? the 14c in fossil fuels is not effectively converted to 14co2 in combustion. it is difficult to detect the 14c when total co2 levels are so high. all 14c in the fossil fuels is removed during the industrial refining processes. fossil fuels are so old that any 14c in the starting organic matter has decayed.

Answers

The fossil fuel which normally contains contains high carbon sources. When it burnt it'll produce a lot of carbon dioxide increasing in its concentration in the atmosphere. But the ratio of 14C to 12C is decreasing because the age of those fossil fuel are so high that the carbon's content is ruined.

What is Fossil Fuels? Fossil fuels are the fabric that contains hydrocarbons that are generated from the dead remains and decay of plants and animals that are buried underground for many years.They are extracted and burned by humans by the tatic of energy for various uses.Uses of Fossil Fuels? natural gascoalpetroleum

These are Extracted by Humans through the method of Drilling and Mining.

   Petroleum:It is also called oil and is most often used as the discussed from of fossil fuel in the world today. Crude Oil is also the form of Petroleum.Petroleum is consist carbon and hydrogen which has gone through an organic phase in the plant having single cell and animals.Petroleum is known by its predominant hydrocarbon.

   

  Natural Gas: It is made up of Methane and is very light in weight.Natural Gas is found Deep down the Earth's Surface.colour, odour, and flammability are three main properties of Natural Gas.

   Coal:coal may be a type of Solid which is Black in colour.Coal are often recovered by under ground Mining.oxygen, carbon, nitrogen, hydrogen, and sulphur, are the five major element of Coal.

Thus from the above conclusion we can say that, ratio of 14C to 12C is decreasing because the age of these fossil fuel are so high that the carbon's content is ruined.

Learn more about Carbon here: https://brainly.com/question/23019018

#SPJ4

WHICH IS A PROPERTY OF ALL BASES?
A. Their formulas include H3O+ ions
B. They increase the OH- concentration in solution
C. They increase the H3O+ concentration in solution
D. Their formulas include OH- ions

Answers

According to the research, the correct option is B. They increase the OH- concentration in solution is a property of all bases.

What is a base?

It is the substance that has alkalinity that, when in solution, increases the concentration of hydroxyl ions (OH-) and establishes combinations with acids for the development of salts.

They are soluble in water and usually have a bitter taste and by providing hydroxyl ions to the medium, they are capable of neutralizing acids.

Therefore, we can conclude that according to the research, the correct option is B. They increase the OH- concentration in solution is a property of all bases.

Learn more about bases here: https://brainly.com/question/16226890

#SPJ1

During a solvent extraction, a student lost track of which layer was the aqueous layer and which was the organic layer. What simple, non‑destructive test could be used to determine which layer is which?.

Answers

Non‑destructive test could be used to determine which layer is which is:

a. add a little distilled water to see which layer the water adds to.

Aqueous layer will be dissolved in water, while the organic layer not.

Water is polar substance as the аqueous layer, while organic layer is nonpolar substance.

Water is a “universal" solvent.

The ability of water to function as a versatile solvent arise from the structure of water molecules.

Other test methods are destructive.

A supercritical extraction is used to separate substances using a supercritical fluid as a solvent. The pressure and temperature of the supercritical fluid are higher than the critical point.

A separatory funnel is used to separate liquids.

In IR spectroscopy, substances have the interaction with infrared radiation.

Missing options:

a. add a little distilled water to see which layer the water adds to

b. obtain a sample of the solution in the seperatory funnel and utilize IR

c. ask the instructor if you can perform a supercritical extraction of the sample

d. obtain a sample of solution in seperatory funnel and utilize NMR

More about water solvent: brainly.com/question/24453293

#SPJ4

a handbook lists the density of lead as 11.3 g/ml. several groups of students are attempting to determine the density of a lead weight by various methods. calculate the average density measured by each group, and the percentage error in each average.

Answers

The average density measured by each group, and the percentage error in each average is 0.88 % , 1.18 % , - 1.77% .

Equation :

Group 1 :

= d (trial 1 +2+3) / 3

= 12.7 + 11.32 + 10.3 / 3

= 11.4 g/ml

% error = [(E.V - T.V) / T.V ] x 100

  = [( 11.4 - 11.3 ) /11.3 ] x 100

  = 0.88 %

Group 2 :

d = A.J + 11.4 + 11.4/3

   = 11.43 g/ml

% error = 11.433 - 11.3 / 11.3 x 100

    = 1.18 %

Group 3 :

d = 10.9 + 11.3 + 11.1 / 3

  = 11.10 g/ml

% error = 11.10 - 11.3 / 11.3 x 100

   = - 1.77%

To know more about density visit :

https://brainly.com/question/15164682

#SPJ4

I understand the question you are looking for :

handbook lists the density of lead as 11.3 gmL, Several groups of students are attempting to determine the density of a lead weight by various methods. Calculate the average density measured by each group. and the percentage error in each average. Measured densities (g/mL) Group [ Group 2 Group 3 Trial 12.7 113 10.9 Trial 2 11.2 114 11.3 Trial 3 10.3 114 11.1 average density of group 1: glmL percent error of group average density of group 2: glmL percent error of group 2: average density of group 3: glmL percent error of group 3: Which group was most accurate? Which group was most precise? group group 2 group group 3 group 3 group



A plant cell takes in carbon dioxide gas, sunlight, and water. Structures in the cell produce sugar for the
plant to use as food to power cell processes. Which characteristic of life is BEST described in this scenario?
#1 of 6-
A All living things respond to stimulus.
B All living things obtain and use materials and energy.
C All living things contain DNA.
D
All living things grow and develop.
G

Answers

Answer:

D All living things grow and develop

Explanation:

the question is asking about photosynthesis and use of sugar for metabolic process like growth , use of energy for cell divison etc . this is basic for all living things.

OH FiverT22 I NEED YOUR HELP OR ANYONE WHO CAN
Which of the following materials contains a base?

Select one:
a. Stomach digestive juices
b. Orange juice
c. Ammonia window cleaner
d. Vinegar

Answers

Ammonia window cleaner materials contains a base

Window cleaner contains ammonia which is basic and used for removing dust and grease on the windows, and also for hard water stain on window.  ammonia is generally basic in nature according to the Arrhenius theory as well as Lewis acid base theory but it behave as acid only in the presence of strong acid that can extract a proton out of it. in window cleaner ammonium hydroxide is used as a window clear and because of hydroxide it is base because hydroxide is basic in nature and ammonia is alkaline in nature that's why  ammonia window cleaner materials contains a base.

Know more about base

https://brainly.com/question/28642350

#SPJ1

How many square centimeters are in an area of 5.50 inch² ?

Answers

the answer is
- 35.4838 (4dp)
- 35.484 (3dp)
- 35.48 (2dp)
i’m not sure how many dp your question is to, so i did it until 4dp <3

calculate the mass of tetraborane b4h10 that contains a million ×1.00106 boron atoms. be sure your answer has a unit symbol if necessary, and round it to 3 significant digits.

Answers

Tetraborane(B₄H₁₀) has a mass of 2.21×10¯¹⁴ g and one billion (1×10⁹)  boron atoms.

TetraboraneAlfred Stock initially isolated tetraborane, which was the first boron hydride chemical to be categorised by Stock and Messenez in 1912. At room temperature, it is a gas and has a boiling point that is quite low (18 °C). Tetraborane gas has a bad odour and is poisonous.Formula B4H102.3 g/cm3 for densityBoranes categoryA reaction between acid and magnesium, aluminium, or beryllium borides can result in the production of tetraborane. Tetraborane is also produced by the pyrolysis of diborane, hydrogenation of boron halides at high temperatures, and hydrolysis of magnesium boride. One of the first reactions to produce a significant amount of tetraborane (14% yield) was the hydrolysis of magnesium boride.

learn more about Tetraborane here

https://brainly.com/question/17207720

#SPJ4

When pol filled another test tube to the top, the liquid formed a low dome, which is evidence of.

Answers

When pol filled another test tube to the top, the liquid formed a low dome, which is evidence of cohesion.

The dome-like shape forms some properties of cohesion due to the water molecules, or termed as their tendency to stick up to one another is expressed by the property of cohesion of water.

Cohesion can be considered as an act, state, and the process of sticking alike molecules together consisting of alike molecules or otherwise entities. An example showing cohesion is of course water molecules. The tendency of several water molecules to compact together is referred to as cohesion property and is held together by a particular cohesive force described as an intermolecular hydrogen bond.

Water is attracted to water itself whereas, in adhesion, water is attracted to some other substances. Adhesion and cohesion are generally considered properties of water that can affect every water molecule present on the Earth and also the water molecule interaction with molecules of other substances as well.

Cohesion is also depicted as an ordinal type of measurement and is generally described as having “high cohesion” or “low cohesion” properties. Modules having high cohesion tend to be preferable, due to which high cohesion is associated with a variety of desirable traits included in software such as reliability, reusability as well as understandability.

Learn to know more about the concept of cohesion on

https://brainly.com/question/13570794

#SPJ4

Most hydrogen (H, #1) atoms have a mass of 1. How many neutrons would there be in one of these hydrogen atoms? (1 pt)
*
1 point
0
1
2
4

Answers

Answer:

0

Explanation:

All atoms are made up of particles known as protons, neutrons, and electrons.

Mass Number

The mass number of an atom is most commonly given in amus. Amu stands for atomic mass unit. In an atom, a proton = 1 amu, a neutron = 1 amu, and an electron = 0 amu. Since atoms are so small, it is hard to measure a singular in normal units such as grams. So, instead, scientists use amus. Comparatively, protons and neutrons are far larger than electrons. This is why electrons are given a mass of 0 amu. Of course, electrons do technically have mass, but that mass is so small that it is negligible in many calculations.

Counting Neutrons

When given the atomic number and mass number, it is easy to find the number of neutrons. The atomic number of an element tells you how many protons there are. The mass number gives you the mass of the atom in amus; this number is equal to protons + neutrons. This means that mass number - atomic number = neutron number.

So, we can set up a very simple equation to find the number of neutrons.

1 - 1 = 0 neutrons.

Most hydrogen atoms have no neutrons.

Which words correctly describe CO2? Select all that apply.
It is a mixture.
It is an element.
It is a substance.
It is a compound.

Answers

Answer:

chemical compound

Explanation:

Carbon dioxide is a chemical compound that consists of two oxygen atoms and one carbon atom

An element that is malleable is ____. Needed ASAP;

A. Very hard
B. Very dense
C. Difficult to pour
D. Easily moulded and shaped

Answers

the correct answer is D

An element whose atomic number is 19 is
I will mark brainliest​

Answers

Answer:The answer is potassium.

How did Dalton atomic theory make the other Atomic theories possible? What essential information did his theory provide

Answers

Answer:

Introduction of John Dalton:

John Dalton was born in a poor weaver's family in 1766 in England. He began his career as a teacher at the age of twelve. Seven years later he became a school principal. In 1793, Dalton left for Manchester to teach mathematics, physics and chemistry in a college. He spent most of his life there teaching and researching. In 1808, he presented his atomic theory which was a turning point in the study of matter.

Dalton's Atomic Theory:

According to Dalton's Atomic theory, all matter whether an element, a compound or a mixture is composed of small particles called atoms.

The postulates of this theory may be stated as follows:

All matter is made of very tiny particles called atoms, which participate in chemical reactions.Atoms are indivisible particles, which cannot be created or destroyed in a chemical reaction.Atoms of a given element are identical in mass and chemical properties.Atoms of different elements have different masses and chemical properties.Atoms combine in the ratio of small whole numbers to form compounds.The relative number and kinds of atoms are constant in a given compound.

Which 2 organelles work together to make proteins in the cell?

A, B or C

Answers

A learned this last year

What is the formula of the Lonic compound formed by the elements lithium and oxygen

Answers

Answer:

Li2O

Explanation:

Lithium is an alkali metal that has three protons and three electrons. Oxygen is a nonmetallic gas that has eight protons and eight electrons. Lithium and oxygen bond to form an ionic compound.

3Li : 1s2 2s1......Li+

8O : 1s2 2s2 2p4.....O2-

SCOPE OF NUCLEAR ENERGY IN NEPAL"​

Answers

Answer:

intruducing nuclear in a country like nepal where the knowledge of nuclear science is limited is a major task.

Explanation:

(maybe it will help if not sorry because my answer is wrong)

Nepal is a landlocked country that has been facing challenges in meeting its energy demand. The country is heavily dependent on imported fossil fuels, which are expensive and have negative environmental impacts.

Nuclear energy is the energy that is released from the nucleus of an atom through a process called nuclear reaction. Nuclear reactions can occur spontaneously or can be induced by bombarding the nucleus with particles such as neutrons.

However, Nepal currently does not have any nuclear power plants, and the country has not developed any nuclear energy infrastructure. Therefore, the development of nuclear energy in Nepal would require significant investment in terms of time, money, and human resources. Additionally, there are concerns about the safety and security of nuclear energy, and these issues would need to be addressed before nuclear energy could be developed in Nepal.

Despite these challenges, there are some potential benefits to the development of nuclear energy in Nepal. Nuclear energy has the potential to provide a reliable source of energy that is not dependent on imported fossil fuels. Additionally, nuclear energy is a low-carbon source of energy that could help Nepal reduce its greenhouse gas emissions and mitigate the impacts of climate change.

In conclusion, the development of nuclear energy in Nepal is a complex issue that requires careful consideration of the potential benefits and risks. While nuclear energy could provide a reliable and low-carbon source of energy, there are significant challenges that would need to be addressed before nuclear energy could be developed in Nepal.

Learn more about nuclear energy here:

https://brainly.com/question/2409175

#SPJ4

Describe Lithium, Beryllium, Calcium, Aluminium, Argons' position in the periodic table.

Answers

Answer:

Explanation:

lithium (Li), chemical element of Group 1 (Ia) in the periodic table, the alkali metal group, lightest of the solid elements. The metal itself—which is soft, white, and lustrous—and several of its alloys and compounds are produced on an industrial scale.

Boiling point: 1,342 °C (2,448 °F)

Oxidation state: +1

Electron configuration: 2-1 or 1s22s1

Beryllium is an element with an atomic number of 4 in the periodic table. It is a bivalent and highly toxic element. The element has one of the highest melting points among the light metals. Beryllium exists in 30 different minerals, among which bertrandite, beryl, chrysoberyl, and phenacite are the most important.

The chemical element Calcium (Ca), atomic number 20, is the fifth element and the third most abundant metal in the earth's crust.

Atomic number: 20

Atomic mass: 40.08 g.mol -1

Standard potential: - 2.87 V

Electronic configuration: 4s2

Where Is Aluminum Found On The Periodic Table? Aluminum is the 13th element on the periodic table. It is located in period 3 and group 13.

Argon is a chemical element with the symbol Ar and atomic number 18. It is in group 18 of the periodic table and is a noble gas. Argon is the third-most abundant gas in the Earth's atmosphere, at 0.934% (9340 ppmv).

Appearance: colorless gas exhibiting a lilac

Group: group 18 (noble gases)

Phase at STP: gas

Speed of sound: 323 m/s (gas, at 27 °C)

Other Questions
PLEASE HELP Line Segment AD=11x+10.6. Find the length of AB and CD. Show all work quadrilateral \(abcd\) has vertices \(a(1,0)\), \(b(5,0)\), \(c(7,2)\), and \(d(3,2)\). use slope to prove that \(abcd\) is a parallelogram. show all of your work. Hey can u pls answer my Chemistry questions asapCHECK MY QUESTIONS I POSTED can someone help pls1/4 (x - 8) = 7 Water is universal solvent true or false Drawing the attention of his classmates as well as his teacher, the student dared to experiment with his professors intelligence by interrogating him about the Bible.Tone: _____?Context Clues: _____?Mood: ______? the tipping point: how little things can make a big difference is the debut book by malcolm gladwell, Write the correct conjugation of each verb.(See Image Below): 6. What will be the speed of the train if it takes 10 hours to cover the 7. A bus travels at a speed of 40 km/h for 25 minutes and then at a speed of 60 km/h for next 25 minutes. Find out the total distance covered by the bus. a tank contains 2840 l of pure water. solution that contains 0.01 kg of sugar per liter enters the tank at the rate 4 l/min, and is thoroughly mixed into it. the new solution drains out of the tank at the same rate. (a) how much sugar is in the tank at the begining? y(0) 12x square+22xy-8y square What does it mean to plagiarize someone else's work? (7 points)Group of answer choicesTo use someone else's words or ideas without giving them creditTo arrange your work so that it looks like someone else's workTo add signal words so others know the ideas are yoursTo know how it feels when someone steals your ideaFlag question: Question 6Question 6 Please guys help me please with this question please please please please Identify whether the graph displays a linear or nonlinear function. Explain why. Graph B On a coordinate plane, Graph B curves up into quadrant 1. Graph B displays a Two types of spiral galaxies exist. A normal spiral galaxy is one kind. Which phrase best describes the second type of spiral galaxy?. A yellow-gold sphere has a mass of 15.2g when passed in the orange liquid the volume was 43ml the law sets out a system for among the parties by providing a basis for deciding their legal interests and rights. Who comforts him after he got beat up in night Question 10 of 10Which encounter did the English use to justify attacks against both theWampanoag and Narragansett peoples?OA. The French and Indian WarOB. The Pequot WarOC. The Great Swamp FightD. The Battle of Bloody Brook Titanium (Ti, #22) atoms bond with Oxygen (O, #8) atoms. What type of bond will hold them together? (1 pt)*1 pointioniccovalentmetalintermolecular (hydrogen, dipole, etc.)