triaryl-1,3,5-triazinane-2,4,6-triones (isocyanurates) peripherally functionalized by donor groups: synthesis and study of their linear and nonlinear optical properties

Answers

Answer 1

the synthesis study of triaryl-1,3,5-triazinane-2,4,6-triones is functionalized by d6-transition metal acetylides complexes at their periphery .

triaryl-1,3,5-triazinane-2,4,6-triones (isocyanurates) peripherally functionalized by donor groups: The linear optical (LO) and nonlinear optical (NLO) properties of a series of isocyanurates functionalized by donor's arms at the periphery. These octupolar derivatives were obtained from commercial isocyanate derivatives several of these derivatives exhibit remarkable transparency or activity/ tradeoffs. In third‐order activity, the stronger donor groups (X=NH2, NMe2, or NPh2) with the longer derivatives possess effective two‐photon absorption cross sections displayed for the extended arylamino cyclotrimers. to rationalize their non linear properties and unravel their electronic structures DFT computations were also performed.

To know more about isocyanurates refer to the link  https://brainly.com/question/27507786?referrer=searchResults.

#SPJ4


Related Questions

classify each of the following amino acids as nonpolar, polar uncharged, polar charged acidic or polar charged basic. justify your classification.

Answers

20 standard amino acids are available. Based on the structure and properties of the side chains, these amino acids can be divided into seven classes.

1. Alkyl groups

2. Sulfur-containing

3. Alcohols

4. Acids

5. Bases

6. Aromatics

7. Amides

According to the makeup of their side chains, amino acids are categorised chemically. One helpful classification of amino acids separates them into two groups: polar (or hydrophilic) and nonpolar (or hydrophobic) amino acids. The polar amino acids have side chains that interact with water, whereas the nonpolar amino acids do not.

a) Basic (contains a guanidinium group as the side chain)

b. Neutral (contains an alkyl side group)

c. Acidic (contains a carboxylic acid side chain)

d. Polar (contains an amide side chain)

e. Polar (contains a phenol side chain)

f. Non-polar (contains a benzene side chain)

g. Neutral (contains H as the side chain)

Learn more about amino acids here:

https://brainly.com/question/2526971

#SPJ4

The Complete question is mentioned below:

Classify the following amino acids as nonpolar, polar but neutral, acidic, or basic.

(a) Arginine

(b) Leucine

(c) Glutamic acid

(d) Asparagine

(e) Tyrosine

(f) Phenylalanine

(g) Glycine


What is the speed of light (c)? Remember the units.

Answers

Answer: c = 2.99792458 x 108m/s

Explanation: This equation is the speed of light in a medium having an index n, and c represents the speed of light in vacuum.

PLEASE HELP 10 POINTS

Which of the following is a
reasonable ground-state electron configuration?
1s21p5
1s22s22p8
1s22s22d4
1s22s22p6

Answers

The reasonable ground - state electron configuration is 1s² 2s²2p⁶

1) Electron configuration is defined as the arrangement of electron in the atomic orbtials.

2)The ground state electron configuration is lowest energy level and have most stable arrangement.

3) An excited state configuration is a higher energy level.

4) According to Aufbau principle ., electrons will occupy the orbitals of lower energies first then occupying higher energy orbitals.

5) Energy of orbitals is calculated by the sum of principle quantum number and azimuthal quantum numbers.

6) The rule of electron filling in the orbital is from lower energy level to higher energy level.

7) According to this rule electrons are filled in the order of 1s 2s 2p 3s 3p 4s 3d 4p 5s ........and so on.

8) According to pauli principle , maximum two electrons, having opposite spin can fit in orbital.

9) According to Hund's rule , orbital in given sub-shell is singly occupied by electrons before filling second electron in an orbital.

10) The ground state configuration is the arrangement of electron around the nucleus of an atom with lower energy levels.

Hence,The reasonable ground-state electron configuration is 1s² 2s² 2p⁶

To learn more about electronic configuration here

https://brainly.com/question/14283892

#SPJ1

Difference between Macro and micro soil organisms

Answers

The difference between Macro and Micro soil organisms is that macro soil organisms can be seen through the eyes but micro soil organisms cannot be seen through the eye, they can be seen under the microscope. Micro organisms are called soil / micro flora while macro organisms are called soil / macro fauna.

Soil organism are divided into two groups, Micro soil organism and macro soil organisms. The micro soil organisms include bacteria, fungi, and protozoa, while macro soil organism include nematods, arthropods, mollusks, etc. Although both are responsible in increasing soil activities, but micro organisms contributes around 60-80% of total biological activity.Microorganisms have many roles such as breakdown of organic matter, recycle nutrients, nitrogen fixing, promoting growth, creating humus, etc.Macro organisms have different roles such as maintaining balances of micro flora in soil, consuming plant residues, etc.

To learn about macro and micro,

brainly.com/question/14796892

#SPJ1

An adult patient who weighs 135 pounds is given 10.0 mL of a different liquid medicine. The label states that each
teaspoon of the medicine mixture contains 75 mg of active ingredient. What dose, in mg/kg, has bee
administered to this patient? Information with the medicine indicates that 3.3 mg/kg is the maximum
recommended dose. Has this patient received an overdose?

Answers

The patient has not received an overdose because only 150 mg of the drug was given instead of 202.488mg which is the maximum recommended dose.

Calculation of drug dosage

The weight of the patient= 135lb

The weight of patient in Kg is calculated as follows,

1 kg = 2.2lb

Xkg = 135Ib

Xkg= 135/2.2

Xkg = 61.36kg

The maximum recommended dose for the drug = 3.3mg/kg

That is, if 3.3 mg = 1 kg

Xmg = 61.36kg

Xmg = 61.36 × 3.3 = 202.488mg

The number of teaspoon administered = 2 = 10ml each containing 75mg of the drug.

The patient received 75 mg ×2 = 150mg of drug.

Therefore, the patient has not received an overdose because only 150 mg of the drug was given instead of 202.488mg which is the maximum recommended dose.

Learn more about drugs here:

https://brainly.com/question/28354788

#SPJ1

Please please help me it’s due
Your friend has to plan an experiment for a science fair. He asks for your help. His topic is “The Strongest Cloth for Backpacks.” You test the wear of different types of cloth.

Define the independent variable, dependent variable, and control group.

Answers

Dependent variable - backpack produced

Independent variable -  types of cloth

Control group - backpack without cloth.

What is an experiment?

In an experiment, you have the dependent and the independent variable. The independent variable is the variable that we have to change in the experiment. The independent variable is the variable that changes as we change the values in of the independent variable.

Now, we can see that the experiment is about testing which type of cloth is best for backpacks. The independent variable in this case has to be the types of cloth while the dependent variable is the backpack produced. The control group is the backpack without cloth.

Learn ore about experiment:https://brainly.com/question/11256472

#SPJ1

3 waves are shown with a line through their center. The bottom of the first wave is labeled C. A bracket labeled D connects the bottom of the second and third waves. A line from the center to the top of the first wave is labeled A. The line leading to the top is labeled B.
Label the parts of this wave.

A:

B:

C:

D

Answers

A – This is the crest, the higher point of the wave

B – This is the amplitude of the wave. It is the point of maximum displacement

C – This is the trough of the wave

D – This is the wavelength of the wave.

What is a wave?

A wave is a disturbance, along a medium that transfers energy. We know that a wave is a progressive wave if it moves from one point to another. There are several ways by which we could classify waves.

Waves could be classified as mechanical waves or as electromagnetic waves or as stationary waves and travelling waves or even as transverse waves and longitudinal waves.

In any case, the wave that we have in this image is a travelling wave and we need to obtain the parts of the wave as has been shown in the image that is attached here.

Let us identify the parts of the wave as shown;

A – This is the crest, the higher point of the wave

B – This is the amplitude of the wave. It is the point of maximum displacement

C – This is the trough of the wave

D – This is the wavelength of the wave.

Learn more about waves: https://brainly.com/question/19834734

#SPJ1

How many protons, neutrons, and electrons are replaced in Zr

Answers

Answer:

protons 16 elecrons 16

Explanation:

this is because we say that the number of protons is equal to the number of elecrons in a give Element.

What is the best way to show the lead levels in six contaminated water wells?
a line graph
a bar graph
a data table
a circle graph

Answers

According to the research, the correct option is a bar graph. It is the best way to show the lead levels in six contaminated water wells.

What is a bar graph?

It is a graph that is used to show the changes that the data have undergone by graphing the data in bars, representing the frequencies by means of columns (or bars), through their height in a Cartesian plane.

It is a way of summarizing a set of data by categories, allowing different values to be compared using bars of different sizes.

Therefore, we can conclude that according to the research, the correct option is a bar graph. It is the best way to show the lead levels in six contaminated water wells.

Learn more about a bar graph here: https://brainly.com/question/1814149

#SPJ1

Write the value represented by 4.5x10-6 g
0.0000045 g
450,000 g
4,500,000 g
0.00000045 g

Answers

the value represented by 4.5x10-6 g is 0.0000045 g it is a representation  in standard notation

To express enormous figures which are in standard notation like 1,300,000 or exceedingly minuscule quantities like 0.0000000000045, scientists use scientific notation. Scientific notation, also referred to as exponential form, is one of the earliest mathematical techniques. It is well regarded by practitioners. People use scientific notation to handle situations where numbers are too large or too small to be calculated easily. Scientists, engineers, and mathematicians all use this technique. where as standard notation is way writing numbers in normal decimal form. The scientific method id most convenient denoting numbers as the numbers will be either too big or too small.

To learn more about standard notation:

brainly.com/question/10253124

#SPJ4

ch4 2o2 → co2 2h2o 4 moles of methane (ch4) are combined with 5 moles of oxygen (o2). how much carbon dioxide (co2) will form? group of answer choices

Answers

Only 2.5 moles of CO2 can be produced since oxygen is the limiting reaction.

Steps

4molCH4 x (1molCO2/1molCH4) =4 mol CO2

5 mol O2 x (1molCO2/2molO2) =2.5 molCO2

Only 2.5 moles of CO2 can be produced since oxygen is the limiting reaction.

Why is carbon dioxide important? What is it?One carbon atom and two oxygen atoms make up the molecules of carbon dioxide (CO2). An essential greenhouse gas that aids in keeping heat in our atmosphere is carbon dioxide. Our earth would be uninhabitable cold without it.What is carbon dioxide used for?

Co2 is used as a refrigerant, in extinguishers, to blow coal, foam rubber and plastics, inflate life rafts and life jackets, blast coal, promote plant growth in greenhouses, immobilise animals before slaughter, and in carbonated drinks.

learn more about carbon dioxide here

https://brainly.com/question/25385913

#SPJ4

lewis dot structure ​

Answers

The Lewis dot structure are given as: dot represents total no. of valence electron around an atomic symbol.

Calcium                    Calcium ion

   Ca :                              Ca[tex]^{2+}[/tex]

Sodium                     Sodium ion

   Na ·                              Na[tex]^{+}[/tex]

Aluminium                 Aluminium ion

   ·Al :                               Al[tex]^{3+}[/tex]

Barium                        Barium ion

  Ba :                                Ba[tex]^{+}[/tex]

Magnesium                Magnesium ion

   Mg :                                Mg[tex]^{2+}[/tex]

Cesium                       cesium ion

   Cs ·                                Cs[tex]^{+}[/tex]

Lithium                      Lithium ion

    Li ·                            Li[tex]^{+}[/tex]

 

Thus, In Lewis dot structure , one dot for every valence  electron with element's symbol.it describe the bonding atoms, no, of bonds in molecules and the lone pairs left in bonding. A single dot represents one electron.Lewis  symbols shows no. of valence electron of a specific elements.

To learn more about Lewis structure here

https://brainly.com/question/20300458

#SPJ1

   

an amphiprotic species must always have a lone pair of valence electrons, and a hydrogen atom that can be donated as a proton (h ). is this statement true or false?

Answers

This statement is true.

Amphiprotic species means molecule or ion which can either donate or accept a proton depending on their circumstances. we identify the amphiprotic species it must contain hydrogen atom that can be released a proton. it also must be capable of accepting proton from the compound. amphiprotic species must also have lone pair of valence electron and a hydrogen atom that can be donated as a proton H+

So it is true.

Know more about amphiprotic species.

https://brainly.com/question/28463442

#SPJ4

Which of the following sets of values is correct for Bromine-80 (Br, #35), which has a mass of 80? (1 pt)
*
1 point
80 protons, 80 electrons, 80 neutrons, 8 valence electrons
45 protons, 45 electrons, 80 neutrons, 7 valence electrons
45 protons, 45 electrons, 35 neutrons, 8 valence electrons
35 protons, 35 electrons, 45 neutrons, 7 valence electrons
35 protons, 45 electrons, 35 neutrons, 2 valence electrons

Answers

The answer is 35 protons, 35 electrons, 45 neutrons, and 7 valence electrons.

what is the number of shells and number of valence electrons for the following elements: Na, O, I, Ca

Answers

The number of electrons present in the outermost shell is called valence electrons.

What are valence electrons?

The number of electrons present in the last shell is called valence electrons. The atomic number of sodium is 11 and the atomic number of oxygen is 8.

There is 1 valence electron in sodium. The number of valence electrons in oxygen is 2.

The atomic number of iodine is 53. The number of the valence electron in iodine is 1. The atomic number of calcium is 20. The valence electron in calcium is 2.

Therefore, The number of electrons present in the outermost shell is called valence electrons.

To know more about valency, refer to the link:

https://brainly.com/question/12744547

#SPJ1

the atom that contains only one electron in the highest occupied energy sublevel (a) s (b) ca (c) ga (d) sb (e) br

Answers

The atom that contains only one electron in the highest occupied energy sublevel is (c) Ga

A sublevel is the division of the principle energy levels. There are infinite numbers of sublevels but the defined are: s, p, d and f.

The abbreviated "s" is for sharpThe abbreviated "p" is for principleThe abbreviated "d" is for diffuseThe abbreviated "f" is for fundamental

These energy levels are used to predict and explain the chemical bonds which atoms can form. The equation that allows for finding the distributions for an electron is the Schrodinger's equation.

For the options gave we have the following sublevels:

(a) S = [Ne] 3s2 3p4

(b) Ca = [Ar] 4s2

(c) Ga = [Ar] 3d10 4s2 4p1

(d) Sb =[Kr] 4d10 5s2 5p3

(e) Br = [Ar] 4s2 3d10 4p5

As we can see the only atom that has one electron in the highest occupied energy sublevel is Gallium

What is an atom?

The atom is the smallest part of the composition of matter, it is indivisible and is composed of a nucleus that has protons and neutrons, and around the nucleus there are the electrons.

Learn more about the atom at: brainly.com/question/17545314

#SPJ4

(a.) a 0.7549g sample of the compound burns in o2(g) to produce 1.9061g of co2(g) and 0.3370g of h2o(g).

Answers

The individual mass of C, H and O in given sample are 0.5196 g, 0.0374 g and 0.1979 g respectively.

Moles of CO2 formed can be calculated as

= Mass of CO2 / Molar mass of CO2

= 1.9061 / 44 = 0.0433 moles

Calculation of no. of moles of carbon

Now, moles of C which is present in one mole of CO2 = 1 mole

Moles of C in 0.0433 moles of CO2 = 0.0433 moles

As we know that, molar mass of C = 12 g / mol

Mass of C in 0.7549 g of given sample can be calculated as

= 0.0433 × 12 =0.5196 g

Mass of H2O formed = 0.3370 g

Similarly, Molar Mass of H2O = 18 g / mol

Moles of H2O = 0.3370 / 18 = 0.0187 moles

Moles of H present in 1 mole of H2O = 2 moles

Moles of H present in 0.0187 mole of H2O = 2 × 0.0187 = 0.0374 moles

Molar mass of H = 1 g / mol

Mass of H contained in 0.7549 g of sample = 1 × 0.0374= 0.0374 g

Mass of O in 0.7549 g sample can be calculated as

= 0.7549 – [(Mass of C ) + (Mass of H) ]

= 0.7549 – [ (0.5196) + (0.0374) ]

= 0.1979 g

Thus, we calculated that the individual mass of C, H and O in given sample are 0.5196 g, 0.0374 g and 0.1979 g respectively.

learn more about Moles:

https://brainly.com/question/26416088

#SPJ4

DISCLAIMER: THE above question is incomplete. Complete question is given below:

A 0.7549g sample of the compound burns in o2(g) to produce 1.9061g of co2(g) and 0.3370g of h2o(g). Calculate the individual mass of C, H and O in the given sample.

What is the coordination number for atoms that pack within the diamond cubic crystal structure?.

Answers

Coordination numbers are defined for the crystalline structures that tell about the numbers of atoms bonded to the central atom. The coordination number of a diamond is 4.

What is a coordination number?

A coordination number has been defining the number of the ions, atoms, and molecules that are bonded to the central atom of the crystalline compound or a complex.

The diamond has 8 carbon atoms in its one unit and its coordination number is 4 as its lattice type is face-centered cubic that has carbons at the corners and face center of the structure. One carbon contributes 1/8 hence and the faces center contributes 1/2.

Therefore, the diamond has a coordination number of 4.

Learn more about coordination numbers, here:

https://brainly.com/question/27289242

#SPJ4

True or False: The periodic table has changed very little since it was originally developed by Mendeleev and Meyer.

Answers

The periodic table has changed very little since it was originally developed by Mendeleev and Meyer is referred to as a false statement.

What is a Periodic table?

This is defined as the arrangement of elements based on their atomic number in a tabular form. It consists of 18 vertical columns which re referred to as groups and seven horizontal rows called period.

Henry Moseley in 1913 organized Mendeleev's periodic table based on physical properties.This took into consideration their atomic number rather than atomic mass and other missing elements.

This is the periodic table which is used currently and therefore hasn't changed much which is why false was chosen.

Read more about Periodic table here https://brainly.com/question/15987580

#SPJ1

Convert a volume of 2650 cm³ to cubic meters.

Answers

Answer:

0.00265m³

Explanation:

from cm³ to m³, divide by 1000000.

2650/1000000

=0.00265m³

HELP I NEED THIS NOW! What is the consequence of carbon's unique bonding ability?

It can only bond with a select few elements.

It is very rarely found in molecules.

Only one carbon atom can be present in a molecule at a time.

It forms the basic building blocks of organic molecules.

Answers

I think it is the last one
It forms the basic building blocks of organic molecules.
Correct me if I’m wrong but carbon is common in nature and it can bond with many elements.

For one thing, carbon atoms are remarkable in the chemical world because they can combine to form extraordinarily long, strong chains with branches or rings of varying widths. The correct option is D.

The most distinctive feature of a carbon atom is its ability to self-combinate or catenate. This characteristic is very important since it produces a lot of organic or carbon-based chemicals. Numerous atoms can be joined to the lengthy carbon chain in various ways to create a vast array of carbon compounds.

Since carbon possesses four valence electrons, it can make four covalent bonds to reach its full outer energy level. It creates molecules known as hydrocarbons when it solely forms bonds with hydrogen.

Thus the correct option is D.

To know more about carbon, visit;

https://brainly.com/question/33716815

#SPJ3

What is the [H*] in a solution with pOH of 0.253?
A.
B.
OC
OD.
5.58 x 10-15 M
1.79 x 1014 M
3.21 x 102 M
5.58 x 10 M

Answers

Answer:

poh = .253

p h2o= p[H+] +P[OH-]

ph2o is 14

14= pH+ + poH

14 = pH+ +.253

14-.253 =pH+

13.747 =ph+

and we know that

log [H+] = -pH+

[H+] = antilog pH+

H+ = antilog 13.747

H+ = 1.79×10-15

A cylinder contains 10 mol of gas at STP. Calculate the temperature and pressure of the gas?​

Answers

Temperature is 273 Kelvin and pressure is 1 bar.

Given - 10 mol of gas at STP

Temperature = ?

Pressure = ?

STP -  STP or Standard Temperature and Pressure, refers to the nominal atmospheric conditions at sea level. 0 degrees Celsius and 1 atmosphere are the respective temperatures and pressures. The STP value is essential for physicists, chemists, engineers, pilots, and navigators in addition to other specialists.

In order to report on the qualities of matter, standard conditions for temperature (T) and pressure (P) relate to a certain temperature and pressure. STP values are frequently applied in gas experiments.

STP was previously defined as follows by the International Union of Pure and Applied Chemistry (IUPAC):

It is 0 degrees Celsius outside (273.15 degrees Kelvin or 32 degrees Fahrenheit)

One atmosphere (101.325 kilopascal or 760 Torr)

This usage of the term has been dropped. However, the definition of the volume (V) term normal cubic meter continues to be often employed under these circumstances. The IUPAC has used a stricter definition of STP since 1982:

Absolute pressure: 105 Pa or 100,000 pascals (1 bar, 14.5 pounds per square inch, 0.98692 atm).

Hence, Temperature is 273 Kelvin and pressure is 1 bar at STP.

To learn more about STP refer - https://brainly.com/question/27100414

#SPJ9

A 150. 0 ml sample of an aqueous solution at 25°c contains 15. 2 mg of an unknown nonelectrolyte compound. If the solution has an osmotic pressure of 8. 44 torr, what is the molar mass of the unknown compound?.

Answers

Answer:

3.141592653589793238

Explanation:

3.141592653589793238

The molar mass of the unknown compound in the aqueous solution was 223.2 g/mol.

What is osmotic pressure?

Osmotic pressure can be described as the minimum pressure requires to be applied to a solution to stop the flow of its pure solvent across a semipermeable membrane. The measurement of the tendency of a solution to take in a pure solvent by osmosis is osmotic pressure.

To determine the molar mass of a compound from the given weight, the concentration of the compound needs to be determined.

π = i ×MRT

8.44 = 1×M× 62.36 ×298

M = 4.54 × 10⁻⁴ M

Given the mass of the unknown compound = 15.2 mg = 0.0152 g

The volume of the compound = 150 ml =0.150 L

From the molarity of the compound, we can determine the molar mass as:

Molarity = mass/(Molar mass × Volume)

Molar mass =  mass/(Molarity × Volume)

Molar mass = 0.0152/ (4.54 × 10⁻⁴ × 0.150)

Molar mass = 223.2 g/mol

Learn more about osmotic pressure, here:

https://brainly.com/question/10046758

#SPJ5

If a meteorologist says that the air pressure is getting lower, what
would you expect to see happen to Torricelli's mercury barometer?

Answers

If the air pressure is reduced, the pointer or hand of the Torricelli's mercury barometer sinks or falls to the bottom.

An inverted (upside-down) glass tube standing in a mercury bath is a Torricellian barometer, also known as a mercury barometer. Some of the mercury's surface particles climb up the tube as a result of air pressure pushing down on it. The mercury rises more rapidly when air pressure increases.

A tall closed tube placed upside-down in a mercury bath, which is a thick liquid metal at room temperature, creates the simplest type of barometer, with the liquid rising partially up the tube as it does in a thermometer. Because mercury is more practical than water for barometers, we utilize it instead. Due to its lower density than mercury, water will be lifted by air pressure significantly higher up a tube than the same volume of mercury.

To learn more about barometers please visit-
https://brainly.com/question/2856885
#SPJ9

85% of Greenland is covered in ice with an average thickness of 1500 meters. Estimate how much ice (in kg) there is in Greenland if the island is approximately 840000 square miles. For this problem, assume the density of ice is exactly 0.917 g/mL, and that one mile is exactly 1.60 kilometers.

Answers

1375.5 kg ice (in kg) there is in Greenland if the island  

Given data is 85% of Greenland is covered in ice  thickness = 1500 meters 840000 square miles,  density = 0.917 g/mL, one mile = 1.60 kilometers.

Here  1.60 kilometers = 0.6177 square miles we have to find ice (in kg) = ?

Here density is given and thickness also given means volume so we have to find mass in kg = ?

Density = mass/volume

0.917 g/mL = mass/ 1500

Mass = 0.917 g/mL× 1500

Mass = 1375.5 kg of  ice there is in Greenland if the island

Know more about ice of Greenland

https://brainly.com/question/28646676

#SPJ1

5.the acyl group is a protecting group for amines which can be deprotected by treatment with sodium hydroxide. please write mechanisms for both the protection and deprotection steps

Answers

Protecting Groups for Amines:

Amine protecting groups are essential for the synthesis of peptides.Carbamates are useful protecting groups for amines. They can be installed and removed under relatively mild conditions.One of the most common carbonate protecting groups is the t-butyloxycarbonyl (Boc) protecting group. It can be removed with strong acid (trifluoro acetic acid) or heat.The carboxybenzyl (CBz) group has a benzyl group and can be removed using catalytic hydrogenation (Pd-C, H₂)The fluorenyl methoxy (FMoc) group can be removed with an amine base (e.g. R₂NH)If multiple protecting groups are present on the same molecule, it's useful to choose them such that they can each be removed under different sets of conditions (e.g. acidic, basic, hydrogenation).

Learn more about Protecting Groups for Amines are:

https://brainly.com/question/2575635

#SPJ4

1. Most of the chemicals included in your kit can be discarded down a drain with copious amounts of water. Describe a situation in which you would need to neutralize a chemical before discarding down a drain.

Answers

Answer:

A strong acid or a strong base should be neutralized before pouring down a drain.

Explanation:

Always make sure to add acid to water (not vice-versa) to avoid a nasty exothermic reaction :)

Can anyone answer this question please it is very important


Which statement about bases is true?

(a) They are all alkalis

(b) They can neutralize acids

(c) They are all soluble


please can anyone explain what the question is about please brother/sister?

Answers

Answer:

b

Explanation:

well acids are acidic and bases are basic so they nutralize it

Option (b) They can neutralize acids, which is true about bases.

A substance that neutralizes acid is a base and this is soluble in water and is an alkali. however, all bases are not soluble in water. for that reason, All alkali are based totally however all bases are not alkali.

Bases are known as Arrhenius bases, Brønsted bases, and Lewis bases. All definitions agree that bases are substances that react with acids as firstly proposed by G.-F. Rouelle in the mid-18th century.

Neutralize acids, a susceptible base is used. Bases have a sour or astringent taste and a pH of more than 7. common bases are sodium hydroxide, potassium hydroxide, and ammonium hydroxide. Bases are neutralized by means of the usage of a weak acid.

Learn more about bases here:-https://brainly.com/question/3948796

#SPJ1

what value would you put the NUMERATOR of this calibration? please help t

Answers

The value that would be put in the numerator of this calibration would be 10° C .

The process of calibrating an instrument involves setting it up such that it can produce results for samples that are within a reasonable range. A key component of instrumentation design is eliminating or reducing conditions that lead to faulty measurements.

In order to ascertain the mistake or confirm the precision of the unknown value of the DUT, a calibration is normally carried out. As a simple illustration, you may calibrate a DUT thermometer by measuring its temperature in water at its known boiling point (212 degrees Fahrenheit) in order to determine the thermometer's inaccuracy.

To obtain accurate readings, a thermometer must be calibrated because its precision is susceptible to deterioration over time. Thermometers can change over time for a variety of reasons.

Hence, The value that would be put in the numerator would be 10° C because difference between two marked values or space between two marked value is 10.

To learn more about Calibration of thermometer refer - https://brainly.com/question/25034625

#SPJ9

Other Questions
Help if u can please I will give brainlest if ur right same match the answers with the question!! Do 7,8 and 9 Professor Cramer determines a final grade based on attendance, two papers, three major tests, and a final exam. Each of these activities has a total of 100 possible points. However, the activities carry different weights. Attendance is worth 7%, each paper is worth 9%, each test is worth 14%, and the final is worth 33%, (a) What is the average for a student with 64 on attendance, 82 on the first paper, 61 on the second paper, 72 on test 1, 64 on test 2, 93 on test 3, and 82 on the final exam? (Round your answer to one decimal place.) (b) Compute the average for a student with the above scores on the papers, tests, and final exam, but with a score of only 29 on attendance. (Round your answer to one decimal place.) What is the solution to this equation?x + 4(x + 5) = 40A. X= 4B. X= 7C. x=9D. x = 12 Find the product.2 1/3 3 1/2Write the answer as a mixed number. What is 0.904 subtract 0.01? plss help(image attached que 5) Which of the following units would be the most appropriate for measuring the volume of a bottle of soda? section 25.1 properties of stars 5y + 7x = -1-2y = -5x - 23Elimination Big Blue Rental Corporation provides rental agent services to apartment building owners. Big Blue Rental Corporations preliminary income statement for August 2022 and its August 31, 2022, preliminary balance sheet did not reflect the following: Rental commissions of $690 had been earned in August but had not yet been received from or billed to building owners. When supplies are purchased, their cost is recorded as an asset. As supplies are used, a record of those used is kept. The record sheet shows that $550 of supplies were used in August. Interest on the note payable is to be paid on May 31 and November 30. Interest for August has not been accruedthat is, it has not yet been recorded. (The Interest Payable of $100 on the balance sheet is the amount of the accrued liability at July 31.) The interest rate on this note is 10%. Wages of $450 for the last week of August have not been recorded. The Rent Expense of $1,590 represents rent for August, September, and October, which was paid early in August. Interest of $470 has been earned on notes receivable but has not yet been received. Late in August, the board of directors met and declared a cash dividend of $4,700, payable September 10. Once declared, the dividend is a liability of the corporation until it is paid. Required: Using the columns provided on the income statement for Big Blue Rental Corporation, make the appropriate adjustments or corrections to the statements, and enter the correct amount in the Final column. (Hint: Use the five questions of transaction analysis.) Using the columns provided on the balance sheet for Big Blue Rental Corporation, make the appropriate adjustments or corrections to the statements, and enter the correct amount in the Final column. (Hint: Use the five questions of transaction analysis.) a box of cereal has a volume of 1250 cubic cm with a length of 20cm and a width of 5cm. what is the height of the box?Define in words variables for the unknown valuescreate an equation solve using algebra Explain how you can use a graphing calculator to determine if a table of values represents a proportional function. What is the value of x + 2x + 3 when x = 3/427/481/16669/16 If you spend 3.5 hours a week studying for English and 7.5 hours studying for math what is the ratio of timespent studying in math to studying for English? 13x + 5 + 17x -4.5 + x the product of two consecutive integers is 420. which quadratic equation can be used to find x, the lesser number? x2 1 Two chemicals were placed in a container and a chemical reaction occured. The container became hot at the end of the reaction. what kind of chemical reaction had happened ? A 2.45M of sulphiric acid solution has a density of 1.15g/ml at 20degree celesius.what is the molality of the solution in that temprature? PLEASE HELPquestion down below The Universal Gravitational constantgives the mass and value a directionconverts the ratio of mass and distance to Newtonsgives the mass and distance a valueconverts the ratio of mass and distance to kilograms