According to the question, the truck will pass now with a frequency of 10.2×10⁻³Hz.
What is the frequency?The number of waves that pass a fixed point in a unit of time is known as the frequency in physics. It is also the number of cycles or vibrations that a body in periodic motion experiences in a unit of time. When a body in periodic motion moves through a series of events or locations before returning to its initial state, it is said to have experienced one cycle or one vibration.
Explanation:
To find the frequency of the cyclist being passed by the truck,
f' = {(19.7+(-1.56))/19.7}×1/90
= 10.2×10⁻³Hz.
To know more about frequency, visit:
https://brainly.com/question/14316711
#SPJ4
M A uniformly charged ring of radius 10.0cm has a total charge of 75.0μC . Find the electric field on the axis of the ring at from the center of the ring.(b) 5.00 cm,
The electric field on the axis of the uniformly charged ring at the center of the ring at 5.00cm is 2.41×〖10〗^7 N/C
Where a positive charge (q) is given, always note that the charges point away from the electric field. The expression used to calculate the electric field away from the center of the ring is given by the equation below,
E=(K_e×b)/(r^3×Q)
Where
E is Electric field
Ke is electric field constant
a is radius of the charge q from the center of the circle
Q is electric charge = 75.0μC
The radius of the charge is a = 10cm= 0.1m
Distance from the electric field = 5cm = 0.05m
Ke is a constant given as 8.99×〖10〗^(9 ) Nm^2/c^2
E=(8.99×〖10〗^(9 ) Nm^2/c^2×0.05)/(〖0.1〗^3×75×〖10〗^(-6) )
E=2.41×〖10〗^7N/C
Therefore, the electric field away from the center of the ring is 2.41×〖10〗^7N/C away from the center of the ring
To learn more about the electric field on the axis of the ring at a distance. Click, https://brainly.com/question/14751604
#SPJ4
In an ultrahigh vacuum system (with typical pressures lower than 10⁻⁷ pascal), the pressure is measured to be 1.00 ×10⁻¹° torr (where 1 torr = 133 Pa). Assuming the temperature is 300 K , find the number of molecules in a volume of 1.00m³ .
The number of molecules in the given volume is 5.33 x 10⁻¹² moles.
What is the number of molecules of the gas?The number of molecules of the gas is calculated as follows;
PV = nRT
n = PV/RT
where;
P is the pressure of the gasV is the volume of the gasT is temperature of the gasn is number of molecules of the gas1 torr = 133 Pa
1 x 10⁻¹⁰ torr = ?
= 1.33 x 10⁻⁸ Pa
n = (1.33 x 10⁻⁸ x 1) / (8.314 x 300)
n = 5.33 x 10⁻¹² moles
Thus, the number of molecules in the given volume is 5.33 x 10⁻¹² moles.
Learn more about number of moles of gases here: https://brainly.com/question/28292999
#SPJ1
If a circuit has a power of 50 W with a current of 4.5 A, what is the resistance in the circuit?
Answer:
[tex]{ \rm{power, \: p = current \times p.d}} \\ { \rm{50 = 4.5 \times (current \times resistance)}} \\ { \rm{50 = 4.5 \times (4.5 \times r)}} \\ { \rm{resistance = \frac{50}{ {4.5}^{2} } }} \\ \\ { \rm{resistance = 2.5 \: ohms}}[/tex]
Me.Henderson Porsche accelerates from 0 to 60 mi/hr in 4 seconds. It’s acceleration is?
The acceleration of Mr. Henderson Porsche is 54545.45 mi/hr².
Velocity is the directional speed of an object, body, or particle in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.
We know that acceleration of a body is Change in Velocity per unit time.
[tex]a=\frac{v-u}{t}[/tex]
Here ,
v is the Final Velocity,
u is the Initial Velocity and;
t is the time taken.
In the given question ,
The Porsche accelerated from 0 to 60 miles per hour in four seconds.
u = 0 mi/hr
v = 60 mi/hr
t = 4 sec
[tex]t=\frac{4}{3600}{~}hr\\[/tex]
[tex]t=\frac{1}{900} {~}hr[/tex]
t = 0.0011 hr
Then,
[tex]a=\frac{v-u}{t}[/tex]
[tex]a=\frac{60-0}{0.0011}[/tex]
[tex]a=54545.45 {~}mi/hr^{2}[/tex]
Hence, the acceleration of the Porsche is 54545.45 mi/hr².
Learn more about acceleration here:
brainly.com/question/460763
#SPJ9
what does it mean when an emission line of helium from a galaxy is shifted toward red?(1 point) the galaxy contains a small percent of hydrogen. the galaxy contains a small percent of hydrogen. the galaxy contains a large percent of hydrogen. the galaxy contains a large percent of hydrogen. the galaxy is moving toward the viewer. the galaxy is moving toward the viewer. the galaxy is moving away from the viewer.
When an emission line of helium from a galaxy is shifted toward red, it means that the galaxy is moving away from the viewer and is denoted as option D.
What is a Galaxy?This refers to the systems of stars and interstellar matter that make up the universe which are gravitationally bound together and are made up of four main components which are:
The disk.The halo.The central bulge.The center or black hole.When an emission line of helium from a galaxy is shifted toward red, there is a displacement to a longer wavelengths and this alteration is referred to as a doppler shift.
Moving away from the view means that the galaxy will be viewed in the red spectrum of the visible light which is a part of the electromagnetic spectrum.
This is therefore the reason why option D was chosen as the most appropriate choice.
Read more about Galaxy here https://brainly.com/question/13956361
#SPJ1
Assume two identical sinusoidal waves are moving through the same medium in the same direction. Under what condition will the amplitude of the resultant wave be greater than either of the two original waves?(a) in all cases(b) only if the waves have no difference in phase (c) only if the phase difference is less than 90°(d) only if the phase difference is less than 120° (e) only if the phase difference is less than 180°
The correct options are B and C
Let us assume the amplitude of the two sinusoidal waves to be A1 and A2
Since, it is mentioned that the waves are identical, therefore let us assume A1=A2= a
The resultant wave of any two waves is given by the formula:
Resultant wave , R = [tex]\sqrt{A1^2+A2^2+2A1A2cos\alpha }[/tex]
where A1 and A2 are amplitudes of wave 1 and 2 and [tex]\alpha[/tex] is the angle between the waves
Now as per the formula, it is the the factor 2cos[tex]\alpha[/tex] that will decide that amplitude is greater than original or not
Hence we know that maximum value of cos [tex]\alpha[/tex] is when [tex]\alpha[/tex] is 0 degrees
Now it is known that value of cos[tex]\alpha[/tex] varies from 1 to 0 for o degrees to π/2
and the value varies from 0 to -1 for angle π/2 to π angle
Case 1: when [tex]\alpha[/tex]=0 degree
Resultant wave R = [tex]\sqrt{A1^2+A2^2+2cos0A1A2}= \sqrt{2A^2+2A^2}=\sqrt{4A^2} =2A[/tex]
Case 2: When [tex]\alpha[/tex] is less than 90
let us consider [tex]\alpha = 45 degree[/tex]
Resultant wave R =
[tex]\sqrt{A1^2+A2^2+2cos45A1A2}= \sqrt{2A^2+2A^2/2}=\sqrt{3A^2} =\sqrt{3} A[/tex]
case 3:
When [tex]\alpha[/tex] is less than 120
[tex]\sqrt{A1^2+A2^2+2cos120A1A2}= \sqrt{2A^2-2A^2/2}=A[/tex]
case 4: when [tex]\alpha[/tex] is less than 180 degrees
the value will be 0
Hence only option b and d are correct
For further reference:
https://brainly.com/question/14286615?referrer=searchResults
#SPJ4
The sound level at a distance of 3.00m from a source is 120dB . At what distance is the sound level (a) 100 dB
The distance at which the sound level is 100 dB is 30m.
What is distance?Distance is a measurement of how far apart two objects or locations are. Distance in physics or common language can refer to a physical length or an estimate based on other factors (e.g. "two counties over"). |AB| is a symbol that can be used to represent the distance between two points. "Distance from A to B" and "Distance from B to A" are frequently used interchangeably. A distance function or metric is a technique to describe what it means for elements of some space to be "close to" or "far away" from each other in mathematics. It is a generalization of the idea of physical distance. Distance is a non-numerical unit of measurement in psychology and other social sciences.
Explanation:
We anticipate the radial distance to be 10 times greater, or 30 m, when the intensity is reduced by 20 dB, or by a factor of 102. A further 90 dB reduction might translate to an additional factor of 104.5 in terms of distance, or roughly 3030000m or 1000 miles. We measure sound intensity using the inverse square law and the decibel scale definition. According to the sound level definition,
β=10log[tex](\frac{1}{10^{-12}W/m^{2} } )[/tex]
We can compute the intensities corresponding to each of the levels mentioned as
[tex]I=[10^{\frac{\beta }{10} } ]10^{-12} W/m^{2}[/tex]
a. The power passing through any sphere around the source is
P=4π[tex]r^{2}[/tex]l
If we ignore absoption of sound by the medium,
conservation of energy requires that
[tex]r_{120} ^{2} I_{120} = r_{100}^{2} I_{100} =r_{10} ^{2} I_{10}[/tex]
then,[tex]r_{100} =r_{120} \sqrt{x} \frac{I_{120} }{I_{100} } =(3.00m)\sqrt{\frac{1\frac{W}{m^{2} } }{10^{-2}\frac{W}{m^{2} } } } =30 m[/tex]
To learn more about distance ,visit:
https://brainly.com/question/21967820
#SPJ4
a 1,500 kg car moving with a speed of 4.00 m/s collides with a 50,000 kg truck moving with a speed of 1.80 m/s in the same direction. if the collision is perfectly inelastic, the change in kinetic energy of the car is . group of answer choices -14,600 j -9,390 j none of these -2,600 j 12,000 j
the change in kinetic energy of the car is None of these
perfectly inelastic collision - It is the physical process. Of one object which strike against another without conserving the kinetic energy of to object.
m₁ = 1,500 kg (mass of car)
v₁ = 4.00m/s (velocity of car)
m₂= 50000kg (mass of truck)
v₂ = 1.80m/s (velocity of truck)
for perfectly elastic collision
[tex]v_{f}[/tex]=?
[tex]m_{1} .v_{1,i} + m_{2} .v_{2,i} =( m_{1} + m_{2} ).v_{f}[/tex]
1500*4 + 50000*1.80
= (1500 + 50000) [tex]v_{f}[/tex]
[tex]v_{f}[/tex] = 1.864 m/s
Initial kinetic energy is
K.E (i) = [tex]\frac{1}{2} m_{1} .v_{1,i} ^{2} + \frac{1}{2} m_{2} .v_{2,i}^{2}[/tex]
[tex]\frac{1}{2}[/tex]× [(1500*4²) +(50000)*(1.8)²
= 93000J
Final kinetic energy is
K.E = [tex]\frac{1}{2}(m_{1} +m_{2} )v_{f}^{2}[/tex]
[tex]\frac{1}{2}[/tex]× ((1500+50000)*(1.864 )²
= 89476 J
Change in kinetic Energy
K.E = K.E (f) - K.E (i)
= 89476 -93000
= -3524 J
the change in kinetic energy of the car is None of these
To know more about collision :
https://brainly.com/question/20308546
#SPJ4
A series of pulses, each of amplitude 0.1m , is sent down a string that is attached to a post at one end. The pulses are reflected at the post and travel back along the string without loss of amplitude.(ii) Next assume the end at which reflection occurs is free to slide up and down. Now what is the net displacement at a point on the string where two pulses are crossing? Choose your answer from the same possibilities as in part (i).
(ii) The net displacement at a point on the string where the pulses cross is 0.2 m.
The term "displacement" refers to a shift in an object's position. It has a magnitude and a direction, making it a vector quantity. An arrow pointing from the starting point to the finishing point serves as its symbol.
A string that is connected to a post at one end is used to transmit a sequence of pulses, each measuring 0.1 meters in amplitude.
At the post, the pulses are reflected and return along the string without losing any of their amplitude.
Now, let's say the ends are free.
There is no inversion on reflection if the end is free. The amplitude at their intersection is 2A.
Now, since A = 0.1 m
Then, 2A = 2(0.1) = 0.2 m
As a result, the net displacement at the string's intersection of two pulses is 0.2 m.
The correct option is (c).
Learn more about amplitude here:
https://brainly.com/question/3613222
#SPJ4
at the surface of a freshwater spring, a manatee with a small amount of air in its lungs is neutrally buoyant. the manatee now dives to a depth of 10 m.
At a depth of 10 m, the manatee's neutral buoyancy keeps it at the same level in water as if there were no air inside its lungs. However, because more air is now contained in the manatee's lungs than before it dove, its weight increases by 9.81 kg and therefore it accelerates downwards (due to momentum). This downward acceleration continues until equilibrium is reached and then ceases due to gravity pulling on both objects equally.
As a result, the manatee now becomes negatively buoyant and must rise to compensate.
What does it mean when something has neutral buoyancy?When something has neutral buoyancy, it is not affected by the weight of anything above or below it.
This means that objects with neutral buoyancy will stay in place regardless of how high or low they are located in a liquid medium.
Examples of things with neutral buoyancy include air balloons and swimming caps.
To learn more about neutral buoyancy, visit:
https://brainly.com/question/2170899
#SPJ4
Ricardo came up with three different designs for paper airplanes. He would like to find out which design flies the farthest. Ricardo plans to fly each paper airplane five times. What step should ricardo take after he flies each plane?.
Ricardo came up with the three different paper airplane designs. Ricardo plans to fly each paper airplane five times to see which design flies the furthest. Ricardo should calculate the aircraft's flight distance after each flight and record it.
How can one determine a distance?Two of the most popular methods in agricultural surveying involve taking measurements of angles and distances with simple equipment. even when the equipment is simple. A high level of precision can be reached with perseverance and practice.
The primary method for measuring distance is (1) pace. The mileage counter. (3) taping or chaining four phases and (6) methods for electronic distance measurement, optical range finders (EDM).
It will be helpful to first examine the common units of distance (displacement). Common English units are as follows:
A foot is made up of 12 inches (in)
Yd (yard) equals 3 ft (ft)
The length of one rod is 16.5 feet and 5.5 yards (yd)
5280 feet, 1760 yards, and 320 rods make up a mile.
The units cancellation method is very helpful when converting between different units of measurement.
To know more about yard visit: https://brainly.com/question/14516546
#SPJ4
A cannonball is shot horizontally off a high castle wall at 47.4 m/s. What is the magnitude of the cannonball's velocity after 1.23 s? (Ignore direction)
Answer:
48.9 m/s
Explanation:
I am ignoring air resistance in this:
horizontal velocity stays constant, so we need to find vertical velocity
v_0y = 0 m/s, t = 1.23s, a = 9.81 m/s^2 <- (g)
v_y = v_0y + at = 0 + 9.81 * 1.23 = 12.066 m/s
the magnitude v = sqrt(v_x ^ 2 + v_y ^2) = sqrt(47.4^2 + 12.066^2) = 48.9m/s
Answer:
V = 49.2 m/s
Explanation:
Given:
Vₓ = 47.4 m/s
t = 1.23 s
___________
V - ?
Vy = Voy + g·t = 0 + 9.8·1.23 ≈ 12,1 m/s
V = √( (Vx)² + (Vy)² ) = √ ( 47,7² + 12,1²) = 49.2 m/s
What happens when you push or pull a water tube
The thing that happens when you push or pull a water tube is that the force makes the tube to speed up, slow down, or be in one place.
It is very hard when pulling water and if a person need to consistently pull air out of the tube before water makes it to the pump, it is very difficult and some pumps may or cannot do it.
What is the pulling about?In regards to pushing, when a person is pushing above the Center of Gravity, one is pushing the said object into the ground and thus is increasing the rate of friction.
If a person is pulling you are said to be pulling above the Center of Gravity and lowering friction.
So, The thing that happens when you push or pull a water tube is that the force makes the tube to speed up, slow down, or be in one place.
Learn more about Gravity from
https://brainly.com/question/557206
#SPJ1
Four toy cars are moving at a constant speed until they experience an unbalanced force of 12 n each. Which toy car would have an acceleration of 3 m/s2 ?.
The car's acceleration would be for a mass of 4 kg is 3 m/s²
Given the information below:
12 Newtons of force.
Increasing speed Equals
By using Newton's Second Law of Motion, we can determine the mass of the car:
According to Newton's second law of motion, force is equal to the rate at which momentum changes. Force is defined as mass times acceleration for a constant mass.
force= mass* acceleration
This formula provides Newton's Second Law of Motion mathematically;
12= mass*3
mass=12/ 3
mass=4 kilogram
By changing the parameters in the formula, we obtain;
= 4 kilos of mass.
As a result, the vehicle with a mass of 4 kg would accelerate at 3 m/s².
Learn more about motion here-
https://brainly.com/question/22810476
#SPJ4
The tensile stress in a thick copper bar is 99.5 % of its elastic breaking point of 13.0× 10¹⁰ N/m² . If a 500-Hz sound wave is transmitted through the material, (b) What is the maximum speed of the elements of copper at this moment?
The speed of the wave in the rod is
[tex]The speed of the wave in the rod is $v = \sqrt{\frac{Y}{\rho}} = \sqrt{\frac{20\times 10^{10}\ \mathrm{N/m^2}}{7.86\times 10^3\ \mathrm{kg/m^3}}} = 5044\ \mathrm{m/s}$[/tex]
5044m/s
What is sound wave?
A sound wave is the pattern of disruption brought on by the movement of energy moving through a medium as it propagates away from the source of the sound (such as air, water, or any other liquid or solid substance). Pressure waves are produced when an item vibrates, such as a ringing phone, and these waves are known as sound waves. The surrounding medium's particles are disturbed by the pressure wave, and those particles disrupt the particles next to them, and so on. Like ocean waves, the disturbance's pattern causes outward movement in all directions. Usually in all directions and with decreased intensity as it gets further away from the source, the wave transmits the sound energy through the medium.
To know more about sound wave, visit;
https://brainly.com/question/21995826
#SPJ4
M A particle with positive charge q = 3.20 ×10⁻¹⁹C moves with a velocity →v = (2i + 3j - k) m/s through a region where both a uniform magnetic field and a uniform electric field exist. (a) Calculate the total force on the moving particle (in unit-vector notation), taking B = (2i + 4j + k) T and E =(4i - j - 2k ) V ,
The Magnitude of force on the charged particle is -
F = (12.8 x 10⁻¹⁹C)i - (3.2 x 10⁻¹⁹C)j - (6.4 x 10⁻¹⁹C)k
We have a positively charged particle that moves through a region where both a uniform magnetic field and a uniform electric field exist.
We have to determine the total force on the moving particle.
What is Lorentz Force?The force exerted on a charged particle (q) moving with velocity (v) through an Electric field (E) and Magnetic field (B) is called Lorentz force. Mathematically -
|F| = qE + qv x B
According to the question, we have -
q = 3.20 × 10⁻¹⁹C
v = (2i + 3j - k) m/s
B = (2i + 4j + k) T
E = (4i - j - 2k) V
Now, using the formula to calculate Lorentz force -
F = q(4i - j - 2k) + q(2i + 3j - k) x (2i + 4j + k)
F = q(4i - j - 2k) + (2qi + 3qj - qk) x ((2i + 4j + k)
F = q(4i - j - 2k) + 0
F = q(4i - j - 2k)
F = (12.8 x 10⁻¹⁹C)i - (3.2 x 10⁻¹⁹C)j - (6.4 x 10⁻¹⁹C)k
To learn more about Lorentz force, visit the link below-
https://brainly.com/question/28211140
#SPJ4
a water tank in the shape of a hemispherical bowl of radius 5 m5 m is filled with water to a depth of 2 m.2 m. how much work is required to pump all the water over the top of the tank? (the density of water is 1000 kg/m31000 kg/m3 ). (use symbolic notation and fractions where needed.) W
The work required to pump all the water over the top of the tank of radius 5 m and depth 2 m is 5.12 x 10^6 J.
The work required to pump the water over the top of the tank is equal to the gravitational potential energy of the water inside the tank.
The potential energy is given by the following equation,
U= mgh
Here, m is the mass of water present inside the tank.
We know that, Density( Mass/Volume
Hence, m= Density x volume
So, the equation becomes
U= ρ x V x g x h
Where V is the volume of hemispherical tank= 2/3π x r^3
Putting the given values in the above equation,
U= 1000 x 2/3 x 3.14 x 53 x 9.8 x 2 = 5.12 x 10^6 J
Hence, the work required to pump all the water over the top of a tank of radius 5 m and a depth of 2 m is 5.12 x 10^6 J.
To know more about "Gravitational Potential Energy", refer to the following link:
https://brainly.com/question/3910603?referrer=searchResults
#SPJ4
a 3.5 kg block is pushed along a horizontal floor by a force : f of magnitude 15 n at an angle ???? 40° with the horizontal (fig. 6-19). the coefficient of ki- netic friction between the block and the floor is 0.25. calculate the magnitudes of (a) the frictional force on the block from the floor and (b) the block’s acceleration.
The frictional force is 11 N and the block’s acceleration is 0.14 m/s².
What is the coefficient of friction?It is defined as the numerical value that indicates the amount of friction present between the surfaces of two bodies. The lower the coefficient of friction, the lower the friction between the surfaces, and the higher coefficient of friction the higher the friction force between them.
For part (a):
Taking x component:
F(x) = F cosθ
Taking y component:
F(y) = -F sinθ
Applying Newton’s second law to the y-axis:
F(N) = 15 sin40 + (3.5)(9.8)
F(N) = 44 N
coefficient U = 0.25
f(k) = 11 N
For part (b):
Applying Newton’s second law to the x-axis:
a = ((15) cos40 - 11)/3.5
a = 0.14 m/s²
Thus, the frictional force is 11 N and the block’s acceleration is 0.14 m/s².
Learn more about the coefficient of friction here:
brainly.com/question/13828735
#SPJ4
Giving brainliest!!! Pls answer
Is a rocket in the process of launching Balanced or Unbalanced force?
Answer: I don't know the right answer but it makes more sense for it to be balanced
Explanation:
____?_______ is the muscular partition which between chest and abdominal cavity.
Answer: The diaphragm
Explanation:
The diaphragm is a thin dome-shaped muscle which separates the thoracic cavity (lungs and heart) from the abdominal cavity (intestines, stomach, liver, etc.)
An 80.8kg man is standing on a frictionless ice surface when he throws a 2.3kg book at 11.8m/s. with what velocity does the man move across the ice?
The man moves across the ice with a velocity of -1 m/s.
Formula:
To calculate the velocity we would be using the formula,
M₁U₁ + M₂U₂ = M₁V₁+ M₂V₂
Given:
After applying the law of linear momentum, we get the following value before the throw;
M₁ = Man's initial mass= 80kg,
U₁ = Initial velocity of Man = 0,
M₂= Initial mass of Book = 4kg,
U₂= Initial velocity of Book = 0.
After the throw, the book's velocity will be
M₁ = Man final mass = 80kg,
V₁ = Man's final velocity = V.
M₂ = Final mass of Book = 4kg,
V₂ = Final velocity of Book = 20 m/s
After substituting the values in the formula, we get,
M₁U₁ + M₂U₂ = M₁V₁+ M₂V₂
Or, (80 x 0) + (4 x 0) = (80V) + (4 x 20)
Or, 0 = 80V + 80
Or, 80V = -80
Or, V = -80/80
V= -1m/s
[Note: The -ve sign shows the opposite direction]
If you need to learn more about velocity click here:
https://brainly.com/question/24445340
#SPJ4
A speeding car passes a highway patrol checkpoint, then decelerates at a constant rate. After 5 s, the car is 225 m from the checkpoint, and its speed is then 30 m/s. What was the car’s velocity when it passed the checkpoint?.
The car’s velocity when it passed the checkpoint was of: 60 m/s
The formula and procedure we will use to solve this exercise is:
vi = [(2 *x)/ t] - vf
Where:
x = distancet = timevi = initial velocityvf = final velocityInformation about the problem:
x = 225mt = 5 svf= 30 m/svi = ?Applying the initial velocity formula we have:
vi = [(2 *x)/ t] - vf
vi = [(2 * 225m)/5 s ] - 30 m/s
vi = [(450 m)/5 s ] - 30 m/s
vi = 90 m/s - 30 m/s
vi = 60 m/s
What is velocity?It is a physical quantity that indicates the displacement of a mobile per unit of time, it is expressed in units of distance per time, for example (miles/h, km/h).
Learn more about velocity at: brainly.com/question/3004254
#SPJ4
Two spheres are made of the same metal and have the same radius, but one is hollow and the other is solid. The spheres are taken through the same temperature increase. Which sphere expands more?.
The expansion of both will be the same. Then the correct option is C.
What is thermal expansion?Thermal expansion, which often excludes phase transitions, is the propensity of matter to alter its form, area, volume, and concentration in response to a variation in heat.
The same metal is used to create two identically sized spheres, but only one is solid and the other is hollow. The same rate of warming is applied to the spheres.
The formula for the thermal expansion is given as,
[tex]\rm \alpha _L = \dfrac{1}{L} \cdot \dfrac{dL}{dT}[/tex]
[tex]\alpha_{L}[/tex] = thermal expansion
L = particular length measurement
dL = change in length
dT = change in temperature
If the material of the sphere is the same, then the coefficient of the expansion of the sphere is the same, then the expansion of both will be the same.
Both will expand at the same rate. Then, C is the right answer.
The complete question is attached below.
More about the thermal expansion link is given below.
https://brainly.com/question/1992029
#SPJ4
the universe originated from the explosion and expansion of all matter and energy. this statement is an example of .
The Big Bang Theory is an example of the universe originated from the explosion and expansion of all matter and energy
The Big Bang Theory is the way that astronomers explain how the universe began as a tiny, dense, fireball that exploded 13.8 billion years ago. It includes Albert Einstein's general theory of relativity along with standard theories of fundamental particles.
The theory was born of the statement that other galaxies are moving away from our own at countless speed in all directions, as if they had all been forced by an ancient explosive force.
What is the solar system?The solar system is the gravitationally bound system of the sun, the objects that orbit it or travel around the sun. It consists of an average star (sun), the planets (Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune and Pluto) and their moons, dwarf planets and countless asteroids, comets, and other small icy objects.
Learn more about solar system at brainly.com/question/14866884
#SPJ4
A solid sphere of radius 40.0cm has a total positive charge of 26.0μC uniformly distributed throughout its volume. Calculate the magnitude of the electric field(a) 0 cm
The magnitude of the electric field is 0 N/C.
We choose a Gaussian sphere of radius r > R concentric with the solid sphere.
Apply Gauss's law from Equation (1):
[tex]\Phi_{E} = \oint E\cdot dA = \frac{q_{in}}{\in_{0} }[/tex]
Since the electric field vector E is parallel to the area vector dA of the curved part the dot product can be the simple product EdA:
[tex]\oint E\cdot dA = \frac{q_{in}}{\in_{0} }[/tex]
since the electric field is constant we can put E out of the integral:
[tex]E \oint dA = \frac{q_{in}}{\in_{0} }[/tex]
[tex]EA = \frac{q_{in}}{\in_{0} }[/tex]
Substitute for A from Equation (2) and for [tex]q_{in}[/tex] from Equation (3)
recognizing that the enclosed charge by the Gaussian sphere is less than Q:
[tex]E(4\pi r^{2}) = \frac{pVgaussian}{\in_{0} }[/tex]
Substitute for V gaussian (volume of the Gaussian surface) from Equation (4):
[tex]E(4\pi r^{2}) = \frac{\rho (\frac{4}{3} \pie r^{2})} {\in_{0} }[/tex]
[tex]E = \frac{\rho r}{3\in_{0} }[/tex]
Where p is the charge per unit volume of the solid sphere which is equal to the total charge Q of the sphere divided by the volume V of the sphere :
[tex]E = \frac{(\frac{Q}{V} )r}{3\in_{0} }[/tex]
[tex]E = \frac{Qr}{(\frac{4}{3} \pi R^{3})3\in_{0} }[/tex]
[tex]E = \frac{Qr}{4\pi \in_{0}R^{3} }[/tex]
Substitute numerical values:
[tex]E = \frac{(26\times10^{-6})(0)}{4\pi(8.8542 \times10^{-12})(0.4)^{3}}[/tex]
[tex]E = 0 N/C[/tex]
Learn more about Gaussian sphere here:
https://brainly.com/question/13295650
#SPJ4
help! i dont now the answer. you will get 15 points if you answer
Answer:
i think a or b is the answer
Explanation:
i also don't know exactly
Oliver repeats his run five times.
Give two reasons why.
Answer:
•So he stays healthy.
•He has energy and time to do it.
A constant force applied to object A causes it to accelerate at 5 m/s². The same force applied to object B causes an accelera-
tion of 3 m/s². Applied to object C, it causes an acceleration of
8 m/s².
a. Which object has the largest mass?
b. Which object has the smallest mass?
c. What is the ratio of mass A to mass B (mA/MB)?
(i) The largest mass will be of the object B.
(ii) The smallest mass will be of the object C.
(iii) The ratio of the mass of object A and b will be 3:5.
According to the Newton’s 2 law for the same force applied acceleration and mass will be in the inverse ratio .it means the more the acceleration the less will be the mass of the object for the same force applied. As the acceleration of the object B is less so its mass will be more and vice versa. And the ratio of the masses will be the inverse ratio of the acceleration of object.
Hence, the ratio will become inverse ratio of acceleration of both the object that is 3:5.
Learn more about the Newton’s 2 law here:
https://brainly.com/question/2009830
#SPJ9
Compared with a 1-kg block of solid iron, a 2-kg block of solid iron has the same select one:
a. mass.
b. volume.
c. weight.
d. all of these
e. none of these
The content of matter in a body is called mass. Weight can be defined as the amount of force required to accelerate an object with mass, while volume is the space occupied by the mass.
On comparing with 1-kg block of solid iron, a 2-kg block of solid iron, mass is different for both the blocks.
So (a) mass cannot be the correct option.
According to this formula ,[tex]Density = \frac{Mass}{Volume}[/tex] , Density for both the blocks would be same, so volume will be different for both the blocks because of the different masses.
So (b) Volume cannot be the correct option.
Weight is mass dependent therefore
(c) weight cannot be the correct option
Since (a), (b), (c), are incorrect so (d) can not be the correct answer
Therefore on Comparing a 1-kg block of solid iron, with a 2-kg block of solid iron, (e) none of these would be same.
Correct option is (e)
To know know more about mass,
https://brainly.com/question/28233584
#SPJ4
explain the way to get wind energy for our use
Answer:
YOUR ANSWER IS HERE....
Wind turbines work on a simple principle: instead of using electricity to make wind—like a fan—wind turbines use wind to make electricity. Wind turns the propeller-like blades of a turbine around a rotor, which spins a generator, which creates electricity.USES OF THE WIND ENERGY.generating electricity.generating electricity.milling grain.generating electricity.milling grain.pumping water.generating electricity.milling grain.pumping water.powering cargo ships (via kites)generating electricity.milling grain.pumping water.powering cargo ships (via kites)reducing carbon footprint.generating electricity.milling grain.pumping water.powering cargo ships (via kites)reducing carbon footprint.sailing.generating electricity.milling grain.pumping water.powering cargo ships (via kites)reducing carbon footprint.sailing.windsurfing.generating electricity.milling grain.pumping water.powering cargo ships (via kites)reducing carbon footprint.sailing.windsurfing.land surfing.HOPE IT HELPS! MARK AS BRAINLIAST.