What are the factors that influence the power input to the compressor?
a) The mass flow of air
b) The pressure ratio of the compressor
c) The inlet temperature
d) Temperature difference between the inlet and outlet
e) The properties of the working medium
Answer:
option e is correct answer
what is geometrical shape? list them and describe any two of them with sketch
Explanation:
Geometric Shapes can be defined as figure or area closed by a boundary which is created by combining the specific amount of curves, points, and lines.
This material is considered flammable. A paint B glue C Oil D ALL of the above
Answer:
Explanation:
Generally speaking, flammable liquids will ignite (catch on fire) and burn easily at normal working temperatures. ... Fuels and many common products like solvents, thinners, cleaners, adhesives, paints, waxes and polishes may be flammable or combustible liquids.
The material which is considered flammable is: A. paint.
A chemical property can be defined as the property of a chemical compound (material) that can be observed and is measurable during a chemical reaction.
In Science, some examples of the chemical properties of a material (substance) include the following;
TarnishingRustingReactivityFlammabilityFlammability refers to the ability of a material to support combustion or burn continuously in the presence of air. An example of a material which is considered to be flammable is paint because it contains a high level of solvents.
Read more on flammability here: https://brainly.com/question/14214497
A chemical rocket is used for launch into earth orbit. The combustion stagnation temperature is 3000K. The molecular weight of the combustion products is 26. The gases expand isentropically as an ideal gas mixture with specific-heat ratio of 1.2. The area ratio Ae/A* of the nozzle is 20, and the throat diameter is 0.1m. Determine:
a. The stagnation pressure if the expansion is correct at sea level
b. The rocket thrust at sea level, 15- km, 30km, and 60km altitude.
Which of the following is the best analogy for the relationship between an equipment operator and the signal person?
The signal person is like the eyes and the equipment operator is like the hands.
The signal person is like the heart and the equipment operator is like the brain.
The signal person is like the arms and the equipment operator is like the legs.
The signal person is like the head and the equipment operator is like the tail.
Answer:
The signal person is like the eyes and the equipment operator is like the hands.
Explanation:
in the metric system what is the prefix for 1000
1. __________ is an example of an electrical device.
Answer:
1. Battery
2. Light bulb
3. Toaster
Explanation:
An electrical device is a device that produces or is powered by electricity.
Answer:
All of the above
Explanation:
A pin B and D are each of 8mm diameter and act as single shape pin C is 6mm diameter and act as double shape for the laoding shaw determine averege shear stress in each
Answer:
what's the question?...........
Which statement most thoroughly describes the profession of an engineer?
Engineers work in teams to design and implement various products using specific processes.
Engineers should never complete a project without collaborating with experts in other fields.
Engineers strive to complete a project in the most cost-conscious and timely manner possible.
Engineers are being increasingly constrained by governmental regulations, limiting their creativity and effectiveness.
Answer:
Engineers work in teams to design and implement various products using specific processes.
Engineers work in teams to design and implement various products using specific processes. The correct option is A.
Who is an engineers?An engineer is a person who designs, builds, and maintains machinery and structures like bridges, railroads, and highways using scientific knowledge.
The word engineer, from which the term engineering is derived, was first used in 1390 to refer to "a constructor of military engines." The term engine'er literally means "one who operates an engine."
In this now-outdated meaning, the term "engine" refers to a military machine, or a mechanical device employed in battle.
An engineer is someone who practices engineering, and those who are qualified to do so may hold more official titles like "Designated Engineering Representative," "Professional Engineer," "Chartered Engineer," "Incorporated Engineer," "Ingenieur," or "European Engineer."
Teams of engineers design and deploy various goods utilizing predetermined procedures.
Thus, the correct option is A.
For more details regarding engineer, visit:
#SPJ2
How does Brake system work
Answer:
To stop a car, the brakes have to get rid of that kinetic energy. They do so by using the force of friction to convert that kinetic energy into heat. This hydraulic system multiplies the force of your foot on the brake pedal into enough force to apply the brakes and make the car stop.
tìm phản lực gối tựa
Answer:
jwjehevrvbdbejd HB dbnwjsishrb t bxjwbkozkwnwn shxvbebhgvevhehjhr. jebn
a skilled technician with several years of experience who is employed to oversee the operation of a company or maintenance department is a
Answer:
business operation Manager
the impact of engineering to socio economic development of the country
Rt = R1 + R2 + R3
[tex] \frac{1}{rt} = \frac{1}{r1} + \frac{1}{r2} + \frac{1}{r3} [/tex]
If R1 = 4Ω , R2 = 6Ω and R3 = 8Ω (Ω= ohm)
Calculate: 4.1.1 Rt (series)
4.1.2 Rt (parallel)
Answer:
In series:
[tex] \frac{1}{r} = \frac{1}{r_{1} } + \frac{1}{r _{2} } + \frac{1}{r_{3} } [/tex]
[tex] \frac{1}{r} = \frac{1}{4} + \frac{1}{6} + \frac{1}{8} \\ \\ \frac{1}{r} = \frac{13}{24} \\ \\ r = \frac{24}{13} \\ { \underline{r = 1.85 \: Ω}}[/tex]
In parallel:
[tex]r = r _{1} + r _{2} + r _{3} \\ r = 4 + 6 + 8 \\ r = 18Ω[/tex]
Which of the following defines context?
the ability to find new ways of thinking about a problem
the condition in which a problem exists
the study of the theoretical nature of an event
the problem-solving technique of an engineer
Answer:
The condition in which a problem exists
Explanation:
Context is the situation surrounding information, e.g. if you don't understand a word in a passge you can look for "context clues" where you use surrounding words to infer the meaning of the unknown one
Where does Astro Teller work? What do they do there?
Answer:
Astro Teller oversees X, Alphabet's moonshot factory for building magical, audacious ideas that can solve concrete problems for millions of people through science and technology. As X's head, Teller has an unmatched vantage point from which to watch possible futures unfold.
Explanation:
hope it helps !!
ss mark me as BRAINLIST
The electrical contractor association is typical example of a
Answer:
Trade association.
Explanation:
I'm thinking it is as it represents contractors who design, install, inspect and maintain amongst other activities electrical and electronic equipments or service.
Two question here please answer it correctly
40. Evaluate f (x2-2xy)dx +(x2y+3)dy around the boundary of the region defined by y2 = 8x and x = 2
(a) directly, (b) by using Green's theorem. Ans. 128/5
(TT.2)
41. Evaluate f (6xy - y2) dx + (3x2 --- 2xy) dy along the cycloid x = 6 - sin 6, y = 1 - cos 6.
(40) It looks like the line integral is
[tex]\displaystyle \int_C (x^2-2xy)\,\mathrm dx + (x^2y+3)\,\mathrm dy[/tex]
where C is the boundary of the region D,
[tex]D = \left\{(x,y) \mid \dfrac{y^2}8\le x\le2\text{ and }-4\le y\le4\right\}[/tex]
(a) To evaluate the line integral directly, split up C into two paths C₁ and C₂, parameterized by
• C₁ : x = t ²/8 and y = -t, where -4 ≤ t ≤ 4
(the y component is negative to make this path have a positive/counterclockwise orientation)
• C₂ : x = 2 and y = t, where -4 ≤ t ≤ 4
Then the line integral over C is the sum of the line integrals over C₁ and C₂ :
[tex]\displaystyle \int_C = \int_C \left(\left(x(t)^2-2x(t)y(t)\right)\dfrac{\mathrm dx}{\mathrm dt} + \left(x(t)^2y(t)-3\right)\dfrac{\mathrm dy}{\mathrm dt}\right)\,\mathrm dt \\\\ = \int_{-4}^4 \left(\left(\frac{t^3}4+\frac{t^4}{64}\right)\frac t4 - \left(3-\frac{t^5}{64}\right)\right)\,\mathrm dt + \int_{-4}^4 (4t+3)\,\mathrm dt \\\\ = \int_{-4}^4 \left(4t+\dfrac{t^4}{16}+\dfrac{5t^5}{256}\right)\,\mathrm dt = \boxed{\frac{128}5}[/tex]
(b) Using Green's theorem, we have
[tex]\displaystyle \int_C (x^2-2xy)\,\mathrm dx + (x^2+3)\,\mathrm dy = \iint_D \frac{\partial(x^2y+3)}{\partial x} - \frac{\partial(x^2-2xy)}{\partial y}\,\mathrm dx\,\mathrm dy \\\\ = \int_{-4}^4 \int_{y^2/8}^2 (2xy+2x)\,\mathrm dx\,\mathrm dy = \boxed{\frac{128}5}[/tex]
# # #
(41) I assume you meant to use θ in the parameterization, and not 6, so that C is parameterized by x = θ - sin(θ) and y = 1 - cos(θ). There's no range given for θ, so I'll just assume 0 ≤ θ ≤ π.
Then ... (for some reason, the math text won't render properly. I've attached the computation as an image)
(where s = sin(θ) and c = cos(θ))
Calculate the engineering stress in SI units on a bar 25 cm long and having a cross section of 9.00 mm × 4.00 mm that is subjected to a load of 3500 kg.
Answer:
7500kg/mm
Explanation:
Need help coding this i’m using python.
Answer:
ill help'
Explanation:
Tech A says that open loop is when the PCM pretty much ignores the oxygen sensor signals. Tech B says that closed loop is when the PCM shuts off the fuel injectors during a collision. Who is correct
Answer:
Tech A
Explanation:
Match the term to the best description scientific method
Answer:
a method of research in which a problem is identified, relevant data are gathered, a hypothesis is formulated from these data, and the hypothesis is empirically tested.
Express the following numbers in decimal:
(a) (11001.1011)
2
(b) (A3.C)
16
(c) (75.16)
8
(d) (ABCD)
16
(a)
11001.1011₂ = 1×2⁴ + 1×2³ + 1×2⁰ + 1×2 ⁻¹ + 1×2 ⁻³ + 1×2 ⁻⁴
… = 16 + 8 + 1 + 1/2 + 1/8 + 1/16
… = 411/16
(b) In base 16, we have A₁₆ = 10 and C₁₆ = 12, so
A3.C₁₆ = 10×16¹ + 3×16⁰ + 12×16 ⁻¹
… = 160 + 3 + 12/16
… = 2620/16 = 655/4
(c)
75.16₈ = 7×8¹ + 5×8⁰ + 1×8 ⁻¹ + 6×8 ⁻²
… = 56 + 5 + 1/8 + 6/64
… = 3918/64 = 1959/32
(d) B₁₆ = 11 and D₁₆ = 13, so
ABCD₁₆ = 10×16³ + 11×16² + 12×16¹ + 13×16⁰
… = 40960 + 2816 + 192 + 13
… = 43981
1. An ideal gas undergoes a process according to PV" = k. Initially, the temperature and volume are 2 bar and 0.1m?, respectively. After the process, the volume doubles. Determine the work done during the process. Take n = 1.4
A double-threaded Acme stub screw of known major diameter is used in ajack having a plain thrust collar of known mean diameter. Coefficients of running friction are estimated as 0.10 for the collar and 0.11 for the screw. Assume (1) the starting friction is about 1/3 higher than running friction and (2) the screw is not exposed to vibration.
Required:
a. Determine the pitch, lead, thread depth, mean pitch diameter, and helix angle of the screw.
b. Estimate the starting torque for raising and for lowering a 5000 lb load.
c. If the screw is lifting a 5000 lb load at the rate of 4 ft/min, what is the screw rpm? What is the efficiency of the jack under this steady-state condition?
d. Would the screw overhaul if a ball thrust bearing (of negligible friction) were used in place of the plain thrust collar.
Answer:
I'm pretty sure it's c but i may be wrong
18) Technician A says that adjustable wrenches should be used when
torquing fasteners. Technician B says that adjustable wrenches can round
the edges of fasteners. Which technician is correct?
A) Technician A only
B) Technician B only
O C) Both technicians
D) Neither technician
B Urine
C Brass
D Sand
8. Separation of mixtures of solids with various sizes
include
A magnetic separation.
B coarsing
sublimation.
Air
Answer:
B
Explanation:
WILL GIVE BRAINLEY PLZZZZZZZ
how is a electrical resistance similar to the diameter of a pipe of water
Answer:
The resistance of the flow of charges in an electric circuit (electrical resistance) is analogous to the frictional effect between water flow through a pipe and the pipe's surface
Explanation:
In comparison to its similarity to the diameter of the pipe affects the flow of water and acts a a factor affecting resistance so are there factors affecting electrical resistance.
in an electrical circuit:
the total length of the wire is to the length of a pipe of water
the cross-sectional area of the wire is to the diameter of a pipe of water.
Thus, the cross sectional are affects the amount of electrical resistance. Wider wires have wider cross-sectional area and vice versa. Also, water will flow (i.e. current) through a wider pipe (i.e. large diameter) at a faster rate than a narrow pipe (i.e. small diameter). This is due to the lower amount of resistance offered by the wider pipe.
in the same manner, the wider the wire, the lesser the electrical resistance to the flow of elsctric charge and vice versa for thiner wires.
Radio capacity may be increased in cellular concept by
Answer:
Answer is "Increasing the number of base stations & reusing the channels"
Explanation:
Answer:
radio capacity may be increased in cellular concept by increasing the number of base stations and reusing the channels.
Propose any improvements if there are any in brake system
Improvements to brake systems are
Increase in disc radiusIncrease in caliper piston areaLine pressureThe friction coefficient between the pad and the rotorWhat is a brake system?Converts the thermal energy through friction, and the brake system takes the kinetic energy of your moving vehicle.Larger discs will permit for more brake torque as the brake pad will apply pressure at a larger radius, permitting for a higher moment.Increasing the size of the pistons means you have more area to put in a specific pressure. If the pressure remains the same and the area increases, the force applied will be increased.Push your foot harder, and the car brakes harder due to this the line pressure increases. Self-explanatory, but if you can increase the friction between the pad and the rotor, you can increase the braking torque.To learn more about the brake system refer to:
https://brainly.com/question/24408495
#SPJ