Successive resonances/harmonics are observed to occur at 129, 215 and 301 Hz (Note: 129 Hz is not necessarily the fundamental frequency). the speed of sound is 76 added to 129 is 215
what is sound ?The pitch of the sound is a major property where the frequency of sound occur by human ear within the range of human hearing.
It is higher than the frequency of the sound where the higher is its pitch and a lower frequency means a lower pitch.
The loudness of sound is another property which can be determined by amplitude of the sound is a measure of the magnitude of the maximum disturbance of sound.
The speed is another property can be detrained as the sound waves which can travel through the medium is called the speed of sound and it is different for different mediums, travels fastest in solids.
For more details sound, visit
brainly.com/question/1502894
#SPJ5
Scientists use models to represent physical situations that are difficult to explore
firsthand.
True
False
Answer:
I believe it is True
Explanation:
If you have completely polarized light of intensity 150 W/m2, what will its intensity be after passing through a polarizing filter with its axis at an 89.0º angle to the light’s polarization direction?
Answer:
0.04569 W/m^2
Explanation:
I=150cos^2(89.0)
=0.04569W/m^2
b. What is measurement? Why measurement is important in our daily life? 3 Write the sunits of electric current and
Explanation:
Please mark me as brainlyest
Answer:
- Measurement is a comparison of an unknown quantity with a known fixed quantity of the same kind. The value obtained on measuring a quantity is called its magnitude. Magnitude of a quantity is expressed as numbers in its units.
- Measurements play an important role in daily life because they are useful to do basic tasks, such as take a child's temperature with a thermometer, make time estimations, measure out medicine and find weights, areas and volumes of different materials or substances.
- Electrical Parameter Measuring Unit Unit/Symbol
Voltage Volt V or E
Resistance Ohm R or Ω
Current Ampere I or i
Capacitance Farad C
Explanation:
I'm not sure but hope it helps.
An acetate rods rubs against a cloth. What type of charge will the rod end up with?
A. Positive
B. Negative
C. Not enough info
D. Neutral
Answer:
I believe it's A
Explanation:
........
2. Calculate the force applied if 200 Pascal pressure is en the area of 0.2m”.
[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]
[tex]\\ \sf\longmapsto Force=Pressure(Area)[/tex]
[tex]\\ \sf\longmapsto Force=200(0.2)[/tex]
[tex]\\ \sf\longmapsto Force=40N[/tex]
1. A leftward force is used to pull a large wagon. In the wagon there is an unknown mass
that makes it very difficult to move, but a force applied is able to set the wagon into
constant motion. Let the force applied to the wagon and its unknown mass be 77.3 N. The
coefficient of friction between the wagon's wheels and the floor is 0.011. Determine the
mass of the wagon if it was empty.
i. Let's say that the unknown mass in the wagon is 95.5% * mass of the
wagon. What is the weight of the wagon when its empty and what is the
weight of the unknown mass?
Answer:
Wagon weight 366.41314(9.81) = 3,594.5129 = 3590 N
Load weight 349.9245(9.81) = 3,432.75982 = 3430 N
Explanation:
Let's assume the surface and the applied force are horizontal.
At constant motion, the friction force must balance the applied force
(from F = ma)
Ff = 77.3
μΝ = 77.3
μmg = 77.3
m = 77.3 / (0.011(9.81))
m = 716.3376... kg
Let M be the mass of the wagon
M + 0.955M = 716.3376
M(1.955) = 716.3376
M = 366.41314...kg
0.955 M = 349.9245... kg
round to the three significant digits of the question numerals.
I need some help, this is going to be late.
Answer:
gravitational force
Explanation:
since they seem like they are falling, gravity usually pulls them down
i think its gravitational force
two masses m and 2m, approach each along a path at right angles to each other. after collision, they stick together and move off at 2m/s at angle 37° to the original direction of the mass m. what were the initial speeds of the two particles
Explanation:
the answer is in picture
How much time does a train take to travel1800 km if it's velocity is 90km/hr
Explanation:
Time= Distance÷Velocity
Time= 1800÷90
Time= 20 hr
20×60= 1200 min
If a body travels 18 km in 1 hrs, find the average velocity of the body in m/s
Answer:
Explanation:
18 km/hr (1000 m/km)(1 hr/3600 s) = 5 m/s
Help meh in this question
Radius=r=R_o/2angular velocity=w=v_omass=m
We know
[tex]\boxed{\sf K.E=\dfrac{1}{2}mv^2}[/tex]
For Rotational motion
[tex]\boxed{\sf v=r\omega}[/tex].
Putting value
[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}m(r\omega)^2[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}mr^2\omega^2[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{2}m\left(\dfrac{R_o}{2}\right)^2v_o^2[/tex]
[tex]\\ \qquad\quad\sf{:}\dashrightarrow K.E=\dfrac{1}{4}mv_o^2[/tex]
Two unequal masses m and 2m are attached to a thin bar of negligible mass that rotates about an axis perpendicular to the bar. When m is a distance 2d from the axis and 2m is a distance d from the axis, the moment of inertia of this combination is "I". If the masses are now interchanged, the moment of inertia will be:_______
A) 2/3 I,
B) I ,
C) 3/2 I ,
D) 2 I ,
E) 4 I
Answer:
C) 3/2 I
Explanation:
Initial condition
I = m(2d)² + 2m(d²)
I = 4md² + 2md² = 6md²
swap masses
I' = 2m(2d)² + m(d²)
I' = 8md² + md² = 9md²
I'/I = 9md²/6md² = 3/2
I' = 3/2I
You push yourself on a skateboard with a force of 30 N east and accelerate at 0.5 m/s² east. Find the mass of theskateboard if your mass is 58 kg.
Answer:
2Kg
first you find the total mass of both the person und skateboard
f = m*a
30 = m* 0.5
m= 30/ 0.5
m= 60 kg
then you subtract the mass of the person from the total mass
m1 - m2
60 - 58
= 2 kg
Taking into account the Newton's second law, the mass of the skateboard is 2 kg.
Newton's Second Law establishes the relationship between the forces acting on an object and the acceleration it experiences. This law says that the acceleration that an object experiences when subjected to a net force (force applied to the body) is proportional to that force.
Mathematically, Newton's second law is expressed as:
F= m×a
where:
F = Force [N] m = Mass [kg] a = Acceleration [m/s²]In this case, you know:
F= 30 N m= ? a= 0.5 m/s²Replacing:
30 N= m× 0.5 m/s²
Solving:
m= 30 N÷0.5 m/s²
m= 60 kg
The mass of the sistem is the sum of the mass of the skateboard and the mass of the mass of your body:
Mass= mass of the skateboard + mass of your body
In this case:
60 kg= mass of the skateboard + 58 kg
Solving:
mass of the skateboard= 60 kg - 58 kg
mass of the skateboard= 2 kg
Finally, the mass of the skateboard is 2 kg.
Learn more about the Newton's second law:
brainly.com/question/23845187?referrer=searchResults brainly.com/question/13959891?referrer=searchResultshttps://www.sejda.com/share/9b04616a77ac4036b81482bc0eb0c97e-xPfTATV8BFmxDGQYW19Vcgybzs21Y2Xo6rIM9TMccWTC6a3xzld8Z9xOlsaB7IQY
Answer:what is your Question
Explanation:
What is a Standard Unit? Give 3 examples
Answer:
The standard (metric) units that would be discussed at primary school would include: grams and kilograms, centimetres, metres and kilometres, millilitres and litres (though children also learn about imperial units in Year 5 maths).
Answer:
Standard units are commonly used units of measurement. For an example; grams and kilograms, centimetres.
Driving home from school one day, you spot a ball rolling out into the street . (See the figure below) You brake for 1.50 s , slowing your 950-kg car from 16.0 m/s to 9.50 m/s.
a)What was the magnitude of the average force exerted on your car during braking?
b)What was the direction of the average force exerted on your car during braking?
c)How far did you travel while braking?
Answer:
a) 4116.67 N
b) negative (assuming car is traveling in positive direction)
c) 19.125 m
Explanation:
Part A)We can find the average force exerted on the car by using Newton's 2nd Law: F = ma.
We have the mass (950 kg) but we do not have the acceleration. Let's solve for this using kinematics.
We have the time during braking, the initial and final velocity, and we need to find the acceleration. To do this, we can use the following equation: v = v₀ + at.
v (final velocity) = 9.50 m/sv₀ (initial velocity) = 16.0 m/st (time) = 1.50 s a = ?Substitute these values into the equation.
v = v₀ + at9.50 m/s = 16.0 m/s + a (1.50 s) 9.50 = 16.0 + 1.50a -6.50 = 1.50a a = -4.333333... m/s²The car's acceleration during the braking period is -4.33 m/s², assuming the car is traveling in the positive direction.
Now, we can use this to plug into Newton's 2nd Law to find the force exerted on the car.
F = maF = (950 kg) (-4.33...) F = -4116.666667 NThe magnitude of the average force exerted on the car while braking is the absolute value, so it is 4116.67 N.
Part B)The direction of the average force is denoted in the negative sign. It is opposite the direction of the car's motion. Assuming that the car is traveling in the positive direction, the direction of the average force exerted on the car is in the negative direction since this force is slowing the car down while braking.
Part C)We can find the distance traveled during the braking period by using another kinematic equation.
We have the initial and final velocity, and the time traveled, so we can use this equation: Δx = v_avg · t.
Note that v_avg is the same thing as (v + v₀) / 2.Substitute the known values into the equation.
Δx = [(9.50 + 16.0)/2] · 1.50 Δx = 12.75 · 1.50Δx = 19.125 mThe car traveled 19.125 m while braking.
câu 1 vẽ sơ đồ trình bày nguyên lý làm việc các thông số và đặc điểm của mạch chỉnh lưu cầu 1 pha
câu 2 vẽ sơ đồ trình bày nguyên lý làm việc của bộ nghịch lưu áp 1 pha
Answer:hola puto
Explanation:cabroné
Which of the following is an example of a physical change?
Burning charcoal.
Dissolving sugar in water.
Cooking a hamburger.
Car Rusting.
Answer:
Dissolving sugar in water is an example of a physical change .
.......
In Bohr's atomic theory, when an electron moves from one energy level to another energy level more distant from the nucleus: Select one: a. Energy is emitted. b. Energy is absorbed. c. No change in energy occurs d. Light is emitted. e. None of these.
(b)
Explanation:
Energy levels farther from the nucleus represent higher energies. Therefore, in order for the electrons to reach these levels, they must absorb additional energies first before they can make the jump.
What is motion please explain with diagram
Answer:
An object in a motion when it is continuously changing its position based on a reference point and observed by a person or a device.
principle of electroplating
dnxjjc cjgnjgjnffjnfkfmgkcknsmksjs dmxmcmfkcnfjcnfjfnfjf in jfnfifnfifnf
Answer:
Electroplating is the method of depositing one metal over another in the presence of a metal salt (in aqueous solution). The water molecule is released as the final product in this process. As a consequence, electroplating is based on the theory of hydrolysis.
is lightning man-made or Natural occuring?
claim:
give scientific reason:
evidence:
Answer:
give me brainliest
Explanation:
Lightning is a naturally occurring electrostatic discharge during which two electrically charged regions, both in the atmosphere or with one on the ground, temporarily equalize themselves, causing the instantaneous release of as much as one gigajoule of energy. ... Humans have deified lightning for millennia.
Lightning happens when the negative charges (electrons) in the bottom of the cloud are attracted to the positive charges (protons) in the ground.
Who has greater displacement, an astronaut who has just completed an orbit of the earth or you when you have just traveled from home to school?
Answer:
Explanation:
This is going to sound like an absurd answer, but sometimes physics can be a little strange.
This answer is weird because of the definition of displacement. It means the distance from the starting point to the ending point, disregarding what happened in between. The point is that the astronaut is at the starting point of his orbit. By definition the starting and ending points are the same. His displacement is 0.
So the answer is you have the greater displacement when you walked one way to school. The starting point and the ending point are different. You have gone further.
However just to make things a little nasty, when you walk home again, your displacement will be the same as the astronaut's -- 0 meters because you will be right back where you started from.
You that just traveled from home to school has greater displacement than the astronaut.
Displacement is defined as the change in the position of an object.
An astronaut who completed an orbit of the earth, has moved from an initial position x₁ and returned to the same position x₁ because Earth is assumed to be spherical. To complete an orbit of the Earth, the astronaut must return to his initial position since he will move round the Earth.
The displacement of the astronaut is zero because x₁ - x₁ = 0
For you that have just traveled from home to school, BUT haven't returned, your displacement is greater,.
Let's say the distance from your home to school = y
Your initial position at your home = 0
your displacement = y - 0 = y
Thus, you that just traveled from home to school has greater displacement than the astronaut.
Learn more here:https://brainly.com/question/10726676
what are the different systemsof units. plz help me don't scam
fundamental UNIT AND DERIVED UNIT
Explanation:
THERE ARE TWO TYPE OF UNIT
1 FUNDAMENTAL UNIT = THE UNIT OF PHYSICAL QUANTITY LIKE METRE SECOND ETC IS FUNDAMENTAL UNIT.
2 DERIVED UNIT=THE UNIT OF DERIVED PHYSICAL QUANTITY LIKE PASCAL ,NEWTON ETC IS DERIVED UNIT
Find voltage in the coil.
(B) 1.58×10³ V
Explanation:
If you divide the input voltage by the number of turns in the primary coil, the result will be equal to the output voltage divided by the number of turns in the secondary coil:
Ui/Np = Uo/Ns
83/250 = Uo/4750 multiply both sides by 4750
394250/250 = Uo
Uo = 1577 = 1.58×10³ V
Answer:
if the input effective voltage is 1,58vIf the toy car weighs 250g and has a kinetic energy of 2.0 J, what is its velocity
Explanation:
Kinetic energy (J) = 2j
mass= 250g
velocity=?
1kg=1000g
mass= 250/1000
mass=0.25kg
Kinetic energy (J) = ½ x mass (kg) x [velocity]² (m/s)
2=1/2 × 0.25× [velocity]²
2=0.125× [velocity]²
[velocity]² = 2/0.125
[velocity]²=16
velocity= (16)^1/2
velocity= 4 m/s
This is a model that describes how much energy is transferred from one trophic
level to the next.
energy pyramid
food web
food chain
trophic level
An 8-ohm resistor is connected to a 120-volt circuit. What current will it draw?
Answer:
15 A (15 amperes of current)
Explanation:
From Ohm's Law,
Voltage, V = Current, I × Resistance, R
Making Current, I the subject:
Current, I = Votage, V/ Resistance,R
= V/R
= 120volts /8ohms
= 15 A
Se lanza un dado 19 veces con las siguientes lecturas 5,1,3,3,6,2,6,4,5,2,1,2,5,3,2,6,1,4,4
Cuál es el promedio de las lecturas obtenidas?
Cuál es la tirada que más se repite (moda)?
Cuál es el mayor valor intermedio de todas las lecturas, ordenas estás de menor a mayor (mediana)?
Teniendo en cuenta la definición de media, mediana y moda:
el promedio de las lecturas obtenidas es 3,42la tirada que más se repite es 2.el mayor valor intermedio de todas las lecturas es 3.La media (también llamada promedio o media aritmética) de un conjunto de datos es una medida de posición central cuyo valor se obtiene al dividir la suma de todos los números entre la cantidad de ellos. Entonces, en este caso, el promedio de las lecturas obtenidas se calcula como:
[tex]Promedio=\frac{5+1+3+3+6+2+6+4+5+2+1+2+5+3+2+6+1+4+4}{19}[/tex]
Resolviendo:
Promedio= 3,42
El promedio de las lecturas obtenidas es 3,42.
Por otro lado, la moda de un conjunto de números es el número que aparece más a menudo dentro del grupo de datos.
En este caso, podes observar que la cantidad de veces que aparece cada número es:
1: 3 veces2: 4 veces3: 3 veces4: 3 veces5: 3 veces6: 3 vecesDebido a que el 2 es el número con mayor cantidad de repeticiones, la tirada que más se repite es 2.
Por último, la mediana es valor que se encuentra en la mitad justa entre los valores máximo y mínimo de los datos con los que se está trabajando; es decir, que al ordenar los número de menor a mayor, éste se encuentra justamente en medio de los valores.
En este caso, ordenando de menor a mayor las lecturas del dado:
1,1,1,2,2,2,2,3,3,3,4,4,4,5,5,5,6,6,6
se observa que el valor el mayor valor intermedio de todas las lecturas es 3.
Aprende más con estos ejemplos:
https://brainly.com/question/24086990?referrer=searchResultshttps://brainly.com/question/15969676?referrer=searchResultshttps://brainly.com/question/17010976?referrer=searchResultsA probability of breaking a tree is more than a short one during storm.why?
Answer:
Due to interia of motion