To find the blood resistivity, we can use Ohm's Law, which states that the resistance (R) is equal to the voltage (V) divided by the current (I):
R = V / I
R = 9.0 V / (280 × 10^-6 A)
R = 9.0 V / 2.80 × 10^-4 A
R ≈ 32,142.9 Ω
Now, we can calculate the resistivity (ρ) using the formula:
ρ = (R × A) / L
In this case, the potential difference (V) is given as 9.0 V, and the current (I) is given as 280 μA (which is equivalent to 280 × 10^-6 A).
R = 9.0 V / (280 × 10^-6 A)
R = 9.0 V / 2.80 × 10^-4 A
R ≈ 32,142.9 Ω
Now, we can calculate the resistivity (ρ) using the formula:
ρ = (R × A) / L
Where A is the cross-sectional area and L is the length between the electrodes.
The diameter of the vein is given as 1.5 mm, so the radius (r) is half of that:
r = 1.5 mm / 2 = 0.75 mm = 0.75 × 10^-3 m
The cross-sectional area (A) of the vein is:
A = πr^2 = π × (0.75 × 10^-3 m)^2
The distance between the electrodes is given as 5.0 cm, which is equal to 5.0 × 10^-2 m.
Substituting the values into the formula, we have:
ρ = (32,142.9 Ω × π × (0.75 × 10^-3 m)^2) / (5.0 × 10^-2 m)
ρ ≈ 3.59 Ω·m
Therefore, the resistivity of the blood in the vein is approximately 3.59 Ω·m.
Learn more about Ohm's Law here
https://brainly.com/question/14296509
#SPJ11
11. a comparison of the age of the earth obtained from radioactive dating an the age of the universe based on galactic doppler shifts suggests that
It indicates that the earth is a relatively young planet in comparison to the age of the universe.
Radioactive dating, also known as radiometric dating, is a method used to determine the age of rocks, minerals, fossils, or other geological materials based on the decay of radioactive isotopes. It relies on the principle that certain elements in nature are unstable and undergo radioactive decay over time, transforming into different isotopes or elements.
The process involves measuring the abundance of certain isotopes, known as parent isotopes, and their stable decay products, known as daughter isotopes, within a sample. The rate at which a particular radioactive isotope decays is characterized by its half-life, which is the time it takes for half of the parent isotopes to decay into daughter isotopes.
A comparison of the age of the earth obtained from radioactive dating and the age of the universe based on galactic Doppler shifts suggests that the age of the universe is much older than the age of the earth. Radioactive dating suggests that the earth is approximately 4.54 billion years old, while galactic Doppler shifts suggest that the universe is approximately 13.8 billion years old.
To know more about Doppler shifts, visit:
brainly.com/question/31833262
#SPJ11
Suppose that there is a 1 in 40 chance of injury on a single skydiving attempt. A friend claims there is a 100% chance of injury if a skydiver jumps 40 times. Assume that the results of repeated jumps are mutually independent.What is the maximum number of jumps, n, the skydiver can make if the probability is at least 0.70 that all n jumps will be completed without injury? (Round your answer down to the nearest integer.)
The maximum number of jumps, n, the skydiver can make with a probability of at least 0.70 that all n jumps will be completed without injury is 20.
Determine the probability?The probability of not getting injured on a single jump is 1 - (1/40) = 39/40. Since each jump is assumed to be independent, the probability of not getting injured on n jumps is (39/40)^n.
To find the maximum number of jumps, we need to solve the following inequality:
(39/40)^n ≥ 0.70
Taking the logarithm of both sides to base 10, we have:
n log10(39/40) ≥ log10(0.70)
Dividing both sides by log10(39/40), we get:
n ≥ log10(0.70) / log10(39/40)
Using a calculator, we find that n ≥ 20.46. Since n must be an integer, the maximum number of jumps is 20.
To know more about integer, refer here:
https://brainly.com/question/490943#
#SPJ4
the two children are balanced on a seesaw. the seesaw is balanced when unloaded. the first child has a mass of 26.0 kg and sits 1.60 m from the pivot. if the second child has a mass of 32.0 kg, how far is she from the pivot? can you use proportionality? a. 1.30 m b. 1.60 m c. 1.97 m
Yes, we can use proportionality to solve this problem. The second child is located 1.30 m from the pivot.
According to the law of balance, the product of the mass and the distance from the pivot on either side of the seesaw should be equal. In other words, if we multiply the mass of the first child by their distance from the pivot, it should be equal to the product of the mass of the second child and their distance from the pivot.
Therefore;
mass1 * distance1 = mass2 * distance2
Given,
mass1 = 26.0 kg and distance1 = 1.60 m for the first child,
mass2 = 32.0 kg for the second child,
we can solve for distance2;
26.0 kg * 1.60 m = 32.0 kg * distance2
Now, we can find the distance2;
41.6 = 32.0 * distance2
distance2 = 41.6 / 32.0
distance2 ≈ 1.30 m
To know more about law of balance, visti:
https://brainly.com/question/10495378
#SPJ11
How harmful are the emissions from cosmetics, hygiene, and cleaning products?
Claim
Evidence 1
Evidence 2
Evidence 3
Reasoning
The packaging used in the beauty sector is less functional and more ornate. The packaging waste generated by the cosmetics industry accounts for around 70% of all waste, or 20 billion units annually.
Thus, Lipstick, shampoo, and body wash are discarded after being used up. There is very little recycling. Currently, the oceans get 8 million tonnes of plastic annually and cosmetics.
Since plastic is not biodegradable, it will never decay. Instead, it disintegrates and fragments into miniscule sizes via a process called "photodegradation." and cosmetics.
The length of this procedure varies based on the type of plastic used, from 100 to 500 years. The more hazardous and challenging it is to clean up, the smaller the plastic becomes.
Thus, The packaging used in the beauty sector is less functional and more ornate. The packaging waste generated by the cosmetics industry accounts for around 70% of all waste, or 20 billion units annually.
Learn more about Cosmetics, refer to the link:
https://brainly.com/question/29359468
#SPJ1
A turtle exclusion device a. are found at the end of long-line fishing vessels b. keep turtles breathing until they are rescued c. is too expensive to employ on a large scale d. is an example of a way to minimize bycatch
A turtle exclusion device (TED) is a device used in the fishing industry to minimize the bycatch of sea turtles.
They are typically found at the end of long-line fishing vessels and work by allowing turtles to escape once they are caught in the fishing net. This device keeps the turtles breathing until they are rescued and released back into the ocean. Although the cost of implementing a TED may be high, the environmental benefits and protection of endangered species make it a worthwhile investment.
While it may not be feasible to employ a TED on a large scale, the use of this technology in the fishing industry is a step in the right direction towards sustainable and responsible fishing practices. Overall, the use of a turtle exclusion device is an effective way to minimize bycatch and protect the delicate balance of our ocean ecosystems.
To know more about sea turtles visit:-
https://brainly.com/question/31824184
#SPJ11
a moon of uranus takes 13.5 days to orbit at a distance of 5.8 ✕ 105 km from the center of the planet. what is the total mass (in kg) of uranus plus the moon?
The total mass of Uranus plus the moon is approximately 8.68 × 10^25 kg. We can use Kepler's Third Law to relate the orbital period and distance of the moon with the masses of Uranus and the moon.
The law states that: (T^2 / R^3) = (4π^2 / GM)
where T is the orbital period, R is the distance between the centers of Uranus and the moon, G is the gravitational constant, and M is the total mass of Uranus and the moon.
Solving for M, we get:
M = (4π^2 / G) * (R^3 / T^2)
Plugging in the given values, we get:
M = (4π^2 / (6.67430 × 10^-11 m^3 kg^-1 s^-2)) * ((5.8 × 10^8 m)^3 / (13.5 days)^2)
Note that we converted the distance from km to meters and the period from days to seconds.
Simplifying this expression, we get:
M = 8.68 × 10^25 kg
Therefore, the total mass of Uranus plus the moon is approximately 8.68 × 10^25 kg.
learn more about orbital period here
https://brainly.com/question/14494804
#SPJ11
according to the discounted cash flow method the value of a bond equals the sum of the
According to the discounted cash flow method, the value of a bond equals the sum of the present values of its future cash flows.
In the case of a bond, the future cash flows typically consist of periodic interest payments and the repayment of the principal amount at maturity. The formula to calculate the value of a bond using the discounted cash flow method is as follows:
Bond Value = PV(Interest Payments) + PV(Principal Repayment)
PV represents the present value of the cash flows, which takes into account the time value of money. It is calculated by discounting each cash flow using an appropriate discount rate, which is usually the bond's yield to maturity.
The interest payments are the periodic coupon payments received by the bondholder, and the principal repayment is the amount returned to the bondholder at the bond's maturity.
By summing the present values of these cash flows, we can determine the value of the bond at a given point in time.
Learn more about flows here
https://brainly.com/question/30618961
#SPJ11
two point charges 10 c and -10 c charge are 23 cm apart. what is the magnitude of the electric field at a point half-way between the two charges?
the magnitude of the electric field at the point half-way between the two charges is 6.84 x 10^11 N/C.
To find the magnitude of the electric field at a point half-way between two-point charges, you can use the formula:
E = k * |Q| / r²
where E is the electric field, k is the electrostatic constant (8.99 x 10^9 N m²/C²), Q is the charge, and r is the distance from the charge to the point.
For two point charges 10 C and -10 C, 23 cm (0.23 m) apart, the electric field at a point half-way between them (0.115 m) can be calculated as follows:
E1 = (8.99 x 10^9 N m²/C²) * (10 C) / (0.115 m)²
E2 = (8.99 x 10^9 N m²/C²) * (-10 C) / (0.115 m)²
Since the charges have opposite signs, their electric fields at the half-way point will have opposite directions. Thus, we add the magnitudes of the electric fields:
E_total = |E1| + |E2|
to know more about, electric field visit
https://brainly.com/question/11482745
#SPJ11
Question: An Air-Track Glider Attached To A Spring Oscillates Between The 10.0 Cm Mark And The 57.0 Cm Mark On The Track. The Glider Completes 15.0 Oscillations In 31.0 S.What Are The (A) Period, (B) Frequency, (C) Amplitude, And (D) Maximum Speed Of The Glider?Part A -Express Your Answer Using Two Significant Figures.T = _________sPart B -Express Your Answer Using
An air-track glider attached to a spring oscillates between the 10.0 cm mark and the 57.0 cm mark on the track. The glider completes 15.0 oscillations in 31.0 s.
What are the (a) period, (b) frequency, (c) amplitude, and (d) maximum speed of the glider?
Part A -
Express your answer using two significant figures.
T = _________s
Part B -
Express your answer using two significant figures.
f = _________Hz
Part C -
Express your answer using two significant figures.
A = _________cm
Part D -
Express your answer using two significant figures.
vmax = _________cm/s
The period, frequency, amplitude and maximum speed are 2.07 seconds, 0.483Hz, 47.0 cm, 143 cm/s respectively.
Part A:
The period (T) of the oscillation can be calculated using the formula:
T = t / N
where t is the total time and N is the number of oscillations.
t = 31.0 s
N = 15.0
Calculating the period:
T = 31.0 s / 15.0
T ≈ 2.07 s
Therefore, the period of the glider's oscillation is approximately 2.07 seconds.
Part B:
The frequency (f) can be calculated as the reciprocal of the period:
f = 1 / T
Substituting the value of T:
f = 1 / 2.07 s
f ≈ 0.483 Hz
Therefore, the frequency of the glider's oscillation is approximately 0.483 Hz.
Part C:
The amplitude (A) is the maximum displacement from the equilibrium position. In this case, it is the distance between the 10.0 cm mark and the 57.0 cm mark:
A = 57.0 cm - 10.0 cm
A = 47.0 cm
Therefore, the amplitude of the glider's oscillation is 47.0 cm.
Part D:
The maximum speed (vmax) can be calculated using the formula:
vmax = 2πAf
where A is the amplitude and f is the frequency.
Given:
A = 47.0 cm
f = 0.483 Hz
Converting amplitude to meters:
A = 47.0 cm * 0.01 m/cm
A = 0.47 m
Calculating the maximum speed:
vmax = 2π * 0.47 m * 0.483 Hz
vmax ≈ 1.43 m/s
Converting maximum speed to centimeters per second:
vmax = 1.43 m/s * 100 cm/m
vmax ≈ 143 cm/s
Therefore, the maximum speed of the glider is approximately 143 cm/s.
(a) The period of the glider's oscillation is approximately 2.07 seconds.
(b) The frequency of the glider's oscillation is approximately 0.483 Hz.
(c) The amplitude of the glider's oscillation is 47.0 cm.
(d) The maximum speed of the glider is approximately 143 cm/s.
To know more about period, visit:
https://brainly.com/question/17054952
#SPJ11
give the set of four quantum numbers that could represent the last electron added (using the aufbau principle) to the sr atom.
The set of four quantum numbers for the last electron added to Sr atom is n=5, l=0, m=0, s=+1/2.
The Aufbau principle states that electrons fill the lowest energy levels first before moving to higher ones. For Sr (strontium) atom, the last electron added would be in the fifth energy level (n=5) as it has 38 electrons. The quantum number l represents the orbital angular momentum of the electron and for the fifth energy level, l can have values of 0, 1, 2, 3, or 4.
Since it is the last electron added, it would fill the orbital with the lowest energy which is the s orbital (l=0). The quantum number m represents the magnetic quantum number which describes the orientation of the orbital in space, and for an s orbital, m=0.
The quantum number s represents the spin of the electron and it can have values of +1/2 or -1/2. Since the electron is added, it would have a positive spin (+1/2). Therefore, the set of quantum numbers for the last electron added to Sr atom is n=5, l=0, m=0, s=+1/2.
Learn more about Aufbau principle here:
https://brainly.com/question/28741905
#SPJ11
two wooden members of 80 3 120-mm uniform rectangular cross section are joined by the simple glued scarf splice shown. knowing that b 5 228 and that the maximum allowable stresses in the joint are, respectively, 400 kpa in tension (perpendicular to the splice) and 600 kpa in shear (parallel to the splice), deter- mine the largest centric load p that can be applied. using mohrs circle
The largest centric load P that can be applied is 67.2 kN.
To determine the largest centric load P that can be applied, we need to analyze the stress distribution in the glued scarf splice. The maximum allowable stresses given are 400 kPa in tension and 600 kPa in shear.
First, let's calculate the tensile stress in the splice perpendicular to the joint (tension stress):
σ_tension = P / (2 * t * b) [Formula for tensile stress in a rectangular cross-section]
Here, t = thickness of the members, and b = width of the members.
Next, let's calculate the shear stress in the splice parallel to the joint (shear stress):
τ_shear = P / (2 * t * h) [Formula for shear stress in a rectangular cross-section]
Here, h = height of the members.
We can use Mohr's circle to determine the combined stress at the point where maximum stress occurs. This is given by:
σ_max = (σ_tension + σ_shear) / 2 + √[((σ_tension - σ_shear)/2)^2 + τ_shear^2]
The largest centric load P that can be applied is obtained when the combined stress σ_max is equal to the maximum allowable stress in tension (400 kPa):
P = σ_max * (2 * t * b)
By substituting the given values into the calculations, we can determine the largest centric load P.
The largest centric load that can be applied is 67.2 kN, considering the maximum allowable stresses in the joint and using Mohr's circle to analyze the stress distribution.
To know more about load, visit:
https://brainly.com/question/14530036
#SPJ11
A piston in a gasoline engine is in simple harmonic motion. The engine is running at the rate of 3600 rev/min. Taking the extremes of its position relative to its center point as ±5.00 cm, find the magnitudes of the (a) maximum velocity and (b) maximum acceleration of the piston.
The maximum velocity (a) of the piston is 18.85 m/s, and the maximum acceleration (b) is 7105.67 m^2/s.
To find the maximum velocity and acceleration, we first need to calculate the angular frequency (ω) of the piston. Since the engine is running at 3600 rev/min, we convert this to radians per second: (3600 rev/min) * (2π rad/rev) * (1 min/60 s) = 377 rad/s. Next, we find the amplitude (A) of the piston's motion, which is 5 cm or 0.05 m.
(a) The maximum velocity (v_max) can be found using the formula v_max = Aω. Plugging in the values, we get v_max = 0.05 m * 377 rad/s = 18.85 m/s.
(b) The maximum acceleration (a_max) can be found using the formula a_max = Aω^2. Plugging in the values, we get a_max = 0.05 m * (377 rad/s)^2 = 7105.67 m^2/s.
Learn more about angular frequency here:
https://brainly.com/question/31495565
#SPJ11
when peak flow is required for a fraction of the hydraulic cycle, a can be used if an accumulator is used to provide auxiliary power.
When peak flow is required for a fraction of the hydraulic cycle, a hydraulic pump can be used if an accumulator is used to provide auxiliary power. An accumulator is a device that stores energy in the form of pressurized fluid, which can be used to supplement the power output of the pump during peak demand periods.
This allows the pump to operate at a lower flow rate during the majority of the cycle, which reduces energy consumption and improves overall system efficiency. Additionally, the use of an accumulator can help to reduce pressure fluctuations and increase system stability, which can lead to improved performance and reliability. When peak flow is required for a fraction of the hydraulic cycle, an accumulator can be used if it is designed to provide auxiliary power.
Identify the peak flow requirement within the hydraulic cycle. Choose an appropriate accumulator to handle the required peak flow. Install the accumulator in the hydraulic system, ensuring it is properly connected to provide auxiliary power during peak flow demands. Monitor the system to ensure the accumulator effectively supplies the necessary peak flow when required, maintaining system efficiency and performance.
To know more about fraction visit:
https://brainly.com/question/10354322
#SPJ11
a golfer played his tee shot a distance of 220 m to point a. he then played a 165 m six iron to the green. if the distance from tee to green is 340 m, determine the number of degrees the golfer was off line with his tee shot
The golfer was off line by approximately 38.7 degrees with his tee shot.
To determine the number of degrees the golfer was off line with his tee shot, we can use trigonometry.
First, we need to find the distance between the golfer's tee shot at point A and the green. We can do this by subtracting the distance the golfer hit with his six iron from the total distance from tee to green:
340 m - 165 m = 175 m
Next, we can use the distance and the distance the golfer hit with his tee shot to find the angle he was off line.
We can use the tangent function:
tan θ = opposite/adjacent
where θ is the angle we want to find. In this case, the opposite side is the distance the golfer was off line (i.e. the distance between point A and the intended target on the green), and the adjacent side is the distance the golfer hit with his tee shot (i.e. 220 m).
tan θ = 175/220
θ = tan⁻¹(175/220)
θ ≈ 38.7 degrees
To know more about tangent function, visit:
https://brainly.com/question/22161213
#SPJ11
Sam's job at the amusement park is to slow down and bring to a stop the boats in the log ride. If a boat and its riders have a mass of 1200 kg and the boat drifts in at 1.2 m/s, how much work does Sam do to stop it?
To calculate the work done by Sam to stop the boat, we need to use the equation:
Work = Change in Kinetic Energy
Kinetic Energy = 0.5 * mass * velocity^2
Mass of the boat and riders = 1200 kg
Initial velocity of the boat = 1.2 m/s
Initial kinetic energy = 0.5 * 1200 kg * (1.2 m/s)^2
The initial kinetic energy of the boat can be calculated using the formula:
Kinetic Energy = 0.5 * mass * velocity^2
Given:
Mass of the boat and riders = 1200 kg
Initial velocity of the boat = 1.2 m/s
Initial kinetic energy = 0.5 * 1200 kg * (1.2 m/s)^2
Now, since Sam brings the boat to a stop, the final velocity of the boat is 0 m/s. Therefore, the final kinetic energy is zero.
The change in kinetic energy is then:
Change in Kinetic Energy = Final Kinetic Energy - Initial Kinetic Energy
= 0 - (0.5 * 1200 kg * (1.2 m/s)^2)
Calculating the change in kinetic energy:
Change in Kinetic Energy = - (0.5 * 1200 kg * (1.2 m/s)^2)
Work done by Sam to stop the boat is equal to the change in kinetic energy:
Work = - (0.5 * 1200 kg * (1.2 m/s)^2)
Calculating the work:
Work = - (0.5 * 1200 kg * 1.44 m^2/s^2)
= - 864 J
The negative sign indicates that the work done by Sam is in the opposite direction of the displacement of the boat. Therefore, Sam does 864 joules of work to stop the boat.
Learn more about Kinetic Energy here
https://brainly.com/question/8101588
#SPJ11
a metal surface is illuminated with blue light and electrons are ejected at a given rate each with a certain amount of energy. if the intensity of the blue light is increased, electrons are ejected
The phenomenon you are describing is known as the photoelectric effect. The photoelectric effect occurs when light, in this case blue light, is incident on a metal surface and electrons are ejected from the surface.
According to the classical wave theory of light, increasing the photoelectric (brightness) of the blue light should result in the ejection of more electrons with greater energy. However, experimental observations do not support this prediction.
In reality, increasing the intensity of the blue light does not affect the energy of the ejected electrons. Instead, it increases the number or rate at which electrons are ejected from the metal surface. The kinetic energy of the ejected electrons depends solely on the frequency (or equivalently, the energy) of the incident photons, and not on the intensity of the light.
The photoelectric effect can be explained by considering light as composed of discrete particles called photons. Each photon transfers its energy to a single electron, and if the energy of the photon is sufficient to overcome the work function of the metal, an electron is ejected with a specific kinetic energy. Increasing the intensity of the light simply increases the number of photons, leading to more electrons being ejected but with the same energy per electron.
This phenomenon is consistent with the particle-like behavior of light and is a fundamental aspect of quantum mechanics.
Learn more about photoelectric here
https://brainly.com/question/1359033
#SPJ11
T/F : A 96 u is traveling at a velocity of 1000 m/s, it splits into two atoms, one of which has a mass of 82 u and is traveling with a velocity of 500 m/s.
True. This is due to the law of conservation of momentum and conservation of mass. The total mass and momentum of the system before the split is equal to the total mass and momentum after the split.
Therefore, if one atom has a mass of 82 u and is traveling at 500 m/s, the other atom must have a mass of 96 u - 82 u = 14 u and be traveling at a velocity of (96 u * 1000 m/s - 82 u * 500 m/s) / 14 u = 1500 m/s.
True. According to the law of conservation of momentum, the total momentum before the split must equal the total momentum after the split. Let's examine this situation:
Initial momentum = mass x velocity = (96 u) x (1000 m/s) = 96000 u*m/s
After the split, one atom has a mass of 82 u and a velocity of 500 m/s:
Momentum of first atom = mass x velocity = (82 u) x (500 m/s) = 41000 u*m/s
To conserve momentum, the second atom must have the remaining momentum:
Momentum of second atom = 96000 u*m/s - 41000 u*m/s = 55000 u*m/s
Since the momentum is conserved, the statement is true.
To learn more about momentum visit;
https://brainly.com/question/30677308
#SPJ11
The warning tag on a lawn mower states that it produces noise at a level of 88dB
. What is this in watts per meter squared?
The decibel (dB) is a logarithmic unit used to express the relative intensity of a sound wave. To convert decibels to watts per meter squared (W/m²), we need to know the reference intensity level for the sound.
In this case, the reference intensity level is typically taken as 10^(-12) W/m². This corresponds to the threshold of human hearing.
The relationship between decibels and watts per meter squared can be expressed using the formula:
I = I0 * 10^(dB/10)
where I is the intensity in watts per meter squared, I0 is the reference intensity level, and dB is the decibel value.
Using the given decibel level of 88 dB, we can calculate the intensity:
I = (10^(-12) W/m²) * 10^(88/10)
I ≈ 10^(-12) * 10^8.8
I ≈ 6.31 x 10^(-5) W/m²
Therefore, the noise level of 88 dB corresponds to an intensity of approximately 6.31 x 10^(-5) W/m².
Learn more about decibel (dB) here:
https://brainly.com/question/28335863
#SPJ11
Calculate the energy used to heat the water with a mass of 2 g, initial temperature T, = 80 °C and final temperature T, = 100 °C. A. 672.01 J
B. 840.11 J
C. 167.36 J
D. 120.000 J
Answer: C. 167.36 J
Explanation: q is the energy of joules, m is the mass of water in grams other known as (g), c is the heat in the capacity of water which is about 4.18 j/g C, T is the change in temp in Celsius C.
our given are :
m = 2 g
ΔT = 100°C - 80°C = 20°C
formula we will be using :
Q = (2 g) * (4.18 J/g°C) * (20°C)
Q = 167.2 J
the energy used to heat the water is about 167.2 J so the closest option from 167.2 is C, 167.36
The correct option is C. 167.36 J
Given: Initial Temperature([tex]T_{1}[/tex])= 80°C
Final Temperature([tex]T_{2}[/tex])= 100°C
Mass of water= 2g = 0.002kg
Specific heat capacity of water([tex]C_{p}[/tex]) is 4184 J/kg°C
When a body of higher temperature is brought in contact with another body of lower temperature then heat is transferred from a body of higher temperature to low temperature. If no heat exchange occurs between the surroundings and the bodies then heat lost by the body at higher temperatures is equal to heat gained by the body at lower temperatures.
Heat loss= Heat gain
This is known as the principle of the calorimeter. It is based on the conservation law of thermal energy.
If no change occurs in the state of the substances then the heat lost or gained by the body [tex]Q=mC_{P}(T_{2}-T_{1})[/tex]
To calculate the energy used to heat the water from temperature 80°C to 100°C, we can use the formula, [tex]Q=mC_{p}(T_{2}-T_{1} )[/tex]
putting all the values in the formula,
Q=0.002×4182×(100-80)
Q= 167.36 Joules
Therefore, the energy used to heat the water with a mass of 2 g with initial temperature T=80°C and final temperature T=100°C is 167.36Joules.
Read more about calorimetry:
https://brainly.in/question/48186352
Which of the following primary climates is most likely to be closest to a pole?
A) dry
B) tropical
C) severe mid-latitude
D) mild mid-latitude
The primary climate most likely to be closest to a pole is C) severe mid-latitude. This climate is characterized by cold winters and cool summers, making it more common in regions near the poles.
The primary climate that is most likely to be closest to a pole is the severe mid-latitude climate. This is because severe mid-latitude climates are characterized by cold temperatures and relatively low precipitation, which are conditions typically found closer to the poles.
The other climate types, such as dry, tropical, and mild mid-latitude, are generally found closer to the equator and are associated with warmer temperatures and higher levels of precipitation. So, the long answer is that severe mid-latitude climates are most likely to be found closer to the poles due to their colder temperatures and lower precipitation levels.
To know more about primary climate visit:-
https://brainly.com/question/8167515
#SPJ11
bats sense objects in the dark by echolocation in which they emit short pulses of sound and then listen for their echoes off the objects. a bat is flying directly toward a wall 50 m away when it emits a pulse. 0.28 s later it recieves the pulse. the air temperature is 20c
The bat is flying towards a wall that is 50 meters away. It emits a pulse and receives the echo 0.28 seconds later. The bat detects the wall when it is approximately 192.104 meters away from it.
To determine the speed of sound in air, we need to take into account the air temperature. The speed of sound in air can be calculated using the following formula:
v = 331.4 + 0.6 * T
where v is the speed of sound in meters per second, and T is the temperature in degrees Celsius.
Given that the air temperature is 20°C, we can substitute T = 20 into the formula:
v = 331.4 + 0.6 * 20
v = 331.4 + 12
v = 343.4 m/s
Now, we can calculate the total time it takes for the sound to travel to the wall and back to the bat. Since the bat receives the pulse 0.28 seconds later, the total time for the round trip is twice that:
t_total = 2 * 0.28
t_total = 0.56 s
We can now calculate the distance traveled by sound using the formula:
distance = speed * time
distance = 343.4 * 0.56
distance ≈ 192.104 m
The bat flying towards the wall emits a pulse and receives the echo 0.28 seconds later. By calculating the speed of sound in air at 20°C and multiplying it by the total time for the round trip, we find that the distance traveled by the sound is approximately 192.104 meters. Therefore, the bat detects the wall when it is approximately 192.104 meters away from it.
To know more about echo ,visit:
https://brainly.com/question/19579065
#SPJ11
one very small uniformly charged plastic ball is located directly above an identical very small uniformly charged plastic ball in a test tube (see figure). the balls are in equilibrium a distance d apart. if the charge on each ball is doubled, the distance between the balls in the test tube would become a) d/2 b) d c) 2d d) 4d e) 8d d
The distance between the balls must double to reduce the force by a factor of 4. Therefore, the correct answer is (c) 2d.
According to Coulomb's law, the force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
In this case, since the balls are in equilibrium, the forces between them must be equal and opposite. If the charges on each ball are doubled, the force between them will be quadrupled (2^2). To maintain equilibrium, the distance between the balls must increase to compensate for the increased force.
Using the inverse square law, the distance between the balls must double to reduce the force by a factor of 4. Therefore, the correct answer is (c) 2d.
To learn more about Coulomb's visit;
https://brainly.com/question/15167088
#SPJ11
which of the following spectroscopy methods does not involve the interaction of organic molecules with electromagnetic radiation?
The following spectroscopy method does not involve the interaction of organic molecules with electromagnetic radiation:
Mass Spectrometry (MS): Mass spectrometry is a technique that analyzes the mass-to-charge ratio of ions. It does not directly involve the interaction of organic molecules with electromagnetic radiation. Instead, it involves the ionization of molecules and the measurement of their mass-to-charge ratios using magnetic and electric fields.
On the other hand, the following spectroscopy methods do involve the interaction of organic molecules with electromagnetic radiation: Ultraviolet-Visible Spectroscopy (UV-Vis): UV-Vis spectroscopy measures the absorption or transmission of ultraviolet and visible light by organic molecules.
Infrared Spectroscopy (IR): IR spectroscopy measures the absorption or emission of infrared light by organic molecules. It provides information about the molecular vibrations and functional groups present in the molecules.
Nuclear Magnetic Resonance Spectroscopy (NMR): NMR spectroscopy measures the absorption of radiofrequency radiation by atomic nuclei in organic molecules. It provides information about the molecular structure, connectivity, and environment of the nuclei.
It's important to note that different spectroscopy methods have their own applications and provide complementary information about organic molecules.
Learn more about electromagnetic here
https://brainly.com/question/13874687
#SPJ11
A beam of light of wavelength 610 nm passes through a slit that is 1.90 μm wide. At what the angle away from the centerline does the second dark fringe occur?
−39.9o
−11.4o
−18.7o
−12.2o
−9.35o
The angle of the 2nth dark fringe for a single slit diffraction pattern can be found using the equation:
sinθ = nλ/b
where θ is the angle away from the centerline, λ is the wavelength of the light, b is the width of the slit, and n is the order of the fringe.
Plugging in the given values:
λ = 610 nm = 610 x 10^-9 m
b = 1.90 μm = 1.90 x 10^-6 m
n = 2
sinθ = (2)(610 x 10^-9 m)/(1.90 x 10^-6 m)
Taking the inverse sine of both sides:
θ = -18.7o
Therefore, the second dark fringe occurs at an angle of -18.7o away from the centerline.
The correct answer is -18.7o.
To find the angle at which the second dark fringe occurs, we can use the formula for single-slit diffraction:
sin(θ) = (m * λ) / a
where θ is the angle of the dark fringe, m is the order of the dark fringe, λ is the wavelength of light, and a is the width of the slit. For the second dark fringe, m = 2. Now, let's plug in the values:
λ = 610 nm = 610 × 10^(-9) m (convert nanometers to meters)
a = 1.90 μm = 1.90 × 10^(-6) m (convert micrometers to meters)
sin(θ) = (2 * 610 × 10^(-9) m) / (1.90 × 10^(-6) m)
sin(θ) ≈ 0.2037
Now, we can find the angle θ by taking the inverse sine (arcsin) of 0.2037:
θ ≈ arcsin(0.2037) ≈ 11.7°
The closest answer from the options given is −11.4°. Please note that the negative sign indicates the direction of the angle, but the actual angle value is 11.4°. So, the second dark fringe occurs at an angle of approximately 11.4° away from the centerline.
To know more about angle value visit
https://brainly.com/question/29098736
#SPJ11
a farsighted woman has a near point of 71.0 cm. what power contact lens (when on the eye) will allow her to see objects 26.5 cm away clearly?
To determine the power of the contact lens needed for a farsighted woman to see objects clearly at a distance of 26.5 cm, we can use the lens formula:
1/f = 1/v - 1/u
1/f = 1/(-26.5 cm) - 1/(71.0 cm)
1/f = -0.0377 cm^(-1) - 0.0141 cm^(-1)
1/f = -0.0518 cm^(-1)
where f is the focal length of the lens, v is the image distance, and u is the object distance. In this case, the woman's near point (closest distance she can focus on) is 71.0 cm, which corresponds to the object distance (u). The desired image distance (v) is -26.5 cm (negative because the image is formed on the same side as the object for a contact lens).
Plugging in the values:
1/f = 1/(-26.5 cm) - 1/(71.0 cm)
Simplifying the equation gives:
1/f = -0.0377 cm^(-1) - 0.0141 cm^(-1)
1/f = -0.0518 cm^(-1)
Finally, taking the reciprocal of both sides of the equation gives the power of the contact lens:
f = -19.3 cm^(-1)
Therefore, the power of the contact lens needed for the woman to see objects 26.5 cm away clearly is approximately -19.3 diopters (or +19.3 D for a positive power lens).
Learn more about lens here
https://brainly.com/question/28039799
#SPJ11
galaxy a and galaxy b are 8 billion light-years apart. if a star blows up in a supernova in galaxy a today, how long will it take the light of the supernova to travel to galaxy b in an expanding universe?
The current distance between them is likely greater than 8 billion light years.
In an expanding universe, the time it takes for light from a supernova in Galaxy A to reach Galaxy B depends on the expansion rate, known as the Hubble constant. Assuming the Hubble constant remains constant during the journey of light, the time it takes will be more than 8 billion years due to the increased distance caused by the expansion. The exact duration would require further calculations using the Hubble constant and other cosmological factors.
Assuming that the expansion rate of the universe is constant, it would take approximately 8 billion years for the light of the supernova to travel from galaxy a to galaxy b. This is because the speed of light is constant, so the distance the light has to travel is the determining factor. However, it is important to note that the actual distance between the galaxies is increasing due to the expansion of the universe, so the current distance between them is likely greater than 8 billion light-years.
To know more about Galaxy visit:
https://brainly.in/question/6496463
#SPJ11
Calculate the grams of solute prepare each of the following solution.
1. 1.0 L of 6.0 M N
a
O
H
solution
2. 7.0 L of a 0.70 M C
a
C
l
2
solution
3. 175 mL of a 3.05 M N
a
N
O
3
solution
To calculate the grams of solute for each solution, we need to use the formula: grams of solute = moles of solute × molar mass of soluteFor 1.0 L of 6.0 M NaOH solution:To find the moles of NaOH, we multiply the molarity by the volume in liters:
moles of NaOH = 6.0 M × 1.0 L = 6.0 moles
The molar mass of NaOH is approximately 22.99 g/mol + 16.00 g/mol + 1.01 g/mol = 40.00 g/mol (rounded to two decimal places).
grams of NaOH = 6.0 moles × 40.00 g/mol = 240.00 grams
For 7.0 L of 0.70 M CaCl2 solution:Moles of CaCl2 = 0.70 M × 7.0 L = 4.90 moles
The molar mass of CaCl2 is approximately 40.08 g/mol + (2 × 35.45 g/mol) = 110.98 g/mol (rounded to two decimal places).
grams of CaCl2 = 4.90 moles × 110.98 g/mol = 543.10 grams
For 175 mL of 3.05 M NaNO3 solution:Since the volume is given in milliliters, we need to convert it to liters by dividing by 1000:
Volume = 175 mL ÷ 1000 = 0.175 L
Moles of NaNO3 = 3.05 M × 0.175 L = 0.53375 moles
The molar mass of NaNO3 is approximately 22.99 g/mol + 14.01 g/mol + (3 × 16.00 g/mol) = 85.00 g/mol (rounded to two decimal places).
grams of NaNO3 = 0.53375 moles × 85.00 g/mol = 45.43 grams (rounded to two decimal places)
Therefore, the grams of solute for each solution are:
240.00 grams
543.10 grams
45.43 grams
Learn more about mass from
https://brainly.com/question/86444
#SPJ11
if we double the amplitude of a vibrating ideal mass-and-spring system, the total energy of the system a) increases by a factor of . b) increases by a factor of 4. c) increases by a factor of 3. d) increases by a factor of 2. e) does not change.
If we double the amplitude of a vibrating ideal mass-and-spring system, the total energy of the system increases by a factor of 4. Answer (b) is correct.
The total energy of a vibrating ideal mass-and-spring system is equal to the sum of the kinetic and potential energies. The kinetic energy is proportional to the square of the velocity, while the potential energy is proportional to the square of the displacement.
When the amplitude is doubled, the displacement is also doubled, which means that the potential energy increases by a factor of 4. According to the law of conservation of energy, the total energy of the system remains constant, which means that the increase in potential energy must be balanced by an increase in kinetic energy.
Since the velocity is proportional to the square root of the kinetic energy, the velocity must also increase by a factor of 2. Therefore, the total energy of the system increases by a factor of 4 (2^2). Answer (b) is correct.
Learn more about amplitude here:
https://brainly.com/question/28041320
#SPJ11
An object is placed 5.0 cm to the left of a converging lens that has a focal length of 20 cm. Describe what the resulting image will look like (i.e. image distance, magnification, upright or inverted images, real or virtual images)?
When an object is placed 5.0 cm to the left of a converging lens with a focal length of 20 cm, the resulting image can be determined using the lens equation: (1/f = 1/d_o + 1/d_i), where f is the focal length, d_o is the object distance, and d_i is the image distance. Plugging in the values, we get 1/20 = 1/5 + 1/d_i.
The magnification (M) can be calculated using the formula M = -d_i/d_o, which gives M = 1.33. Since the magnification is positive, the image is upright and 33% larger than the object. The positive magnification also indicates that the image is virtual, as it cannot be projected onto a screen. In summary, the resulting image is virtual, upright, magnified by 1.33 times, and located 6.67 cm to the left of the lens.
To know more about converging lens visit :-
https://brainly.com/question/28348284
#SPJ11
if your front lawn is 24.0 feet wide and 20.0 feet long, and each square foot of lawn accumulates 1350 new snow flakes every minute, how much snow (in kilograms) accumulates on your lawn per hour? assume an average snow flake has a mass of 2.10 mg.
The amount of snow (in kilograms) that accumulates on the lawn per hour is approximately 8.1 kg.
What is kilograms?
Kilograms (kg) is the primary unit of mass in the International System of Units (SI). Mass is a fundamental property of matter that quantifies the amount of material or substance present in an object.
The kilogram is defined as the mass of the International Prototype of the Kilogram (IPK), a platinum-iridium cylinder kept at the International Bureau of Weights and Measures (BIPM) in France. However, it is worth noting that the definition of the kilogram was recently updated in May 2019. The new definition is based on the Planck constant, a fundamental constant in quantum mechanics, providing a more precise and stable definition.
To calculate the amount of snow that accumulates on the lawn per hour, we need to determine the total number of snowflakes that fall on the lawn in one hour and then calculate the total mass of these snowflakes.
First, we calculate the total area of the lawn in square feet by multiplying the width and length: 24.0 ft * 20.0 ft = 480.0 sq ft.
Next, we calculate the total number of snowflakes that fall on the lawn in one hour by multiplying the number of snowflakes per square foot per minute (1350) by the total area of the lawn: 1350 flakes/sq ft/min * 480.0 sq ft = 648,000 flakes/hour.
To find the total mass of the snowflakes, we multiply the total number of snowflakes by the mass of each snowflake: 648,000 flakes/hour * 2.10 mg/flake = 1,361,280 mg.
Finally, we convert the mass to kilograms by dividing by 1,000 (since 1 kg = 1,000 g): 1,361,280 mg / 1,000 g/kg = 1361.28 g. Converting grams to kilograms, we get approximately 1.36 kg.
Therefore, the amount of snow that accumulates on the lawn per hour is approximately 1.36 kg or 8.1 kg when rounded to one decimal place.
To know more about kilogram, refer here:
https://brainly.com/question/32120079#
#SPJ4