In an experiment, there are several things that you could do to drive the reaction forward. Two specific procedural steps that you could do in the experiment to drive the reaction forward are as follows:1. Increasing the temperature: The rate of the reaction increases with an increase in temperature.
The higher the temperature, the faster the particles will move, resulting in more collisions that are energetic enough to cause a reaction. If the temperature is lowered, then the reaction rate will slow down.2. Increasing the concentration of reactants: The rate of the reaction increases with an increase in the concentration of reactants.
If the concentration of reactants is high, then there will be more collisions between the molecules, resulting in a faster reaction. However, if the concentration is low, then there will be fewer collisions, resulting in a slower reaction. Thus, these are two specific procedural steps that you could do in the experiment to drive the reaction forward.
To know more about Reaction forward refer here:
https://brainly.com/question/8592296#
#SPJ11
naphthalene, the active ingredient in one variety of mothballs, is an organic compound that contains carbon and hydrogen only. complete combustion of a 20.10 mg sample of naphthalene in oxygen yielded 69.00 mg of co2 and 11.30 mg of h20. determine the molecular formula of naphthalene
The molecular formula of naphthalene is C6H6 if it involves the complete combustion of a 20.10 mg sample of naphthalene in oxygen yielded 69.00 mg of co2 and 11.30 mg of h20.
We have the complete combustion of a 20.10 mg sample of naphthalene in oxygen yielded 69.00 mg of co2 and 11.30 mg of h20.
Mass of C in CO2 is,
= 12/44 x 69.00
= 18.82mg
Mass of H in H2O is,
= 2/18 x 11.30
= 1.256mg
We have to find Mole ratios.
C= 18.82/12= 1.568
H= 1.256/1= 1.256
Now we have to divide by the smaller mole ratio.
C= 1.568/1.256= 1.2=1
H= 1.256/1.256= 1
So the empirical formula is CH.
The empirical formula of a compound is defined as the formula which gives us the lowest whole number ratio of that particular compound.
A molecular formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule.
Empirical formula weight=12+1=13
We can get the mass of the empirical formula can be computed by dividing the molar mass of the compound by it.
Molecular weight=78
n= Molecular weight / Empirical formula weight
= 78/ 13
=6
Molecular formula=(CH) n =(CH) 6 =C6H6
To learn more about Molecular formula
https://brainly.com/question/15960587
#SPJ4
help me please and thank you
The explanation that best describes what beta particles are blocked by is: This type of radiation is blocked by aluminum or metal foil.
What are beta particles?Beta particles are high-energy, high-speed electrons or positrons emitted by certain types of radioactive decay. Beta particles have a lower penetrating power than gamma rays and can be stopped by thin layers of materials such as aluminum or metal foil.
However, if the beta particle is more energetic, it may require a thicker material such as plastic, wood or thick clothing to block it. Lead or concrete can also be effective in stopping beta particles, but they are not as effective as they are in blocking gamma rays.
Learn more about beta particles at:
https://brainly.com/question/24312947
#SPJ1
how many grams of fe are there in a sample of fe that contains the same number of moles as a 14.0 gram sample of ar?
The mass of the iron (Fe) sample that contains the same number of moles as a 14.0 g sample of Ar is 55.8 g.
To solve this problem, we must first determine the number of moles of Ar in the given 14.0 g sample. Ar's molar mass is 39.95 g/mol, according to the periodic table. Therefore, 14.0 g of Ar (1 mol Ar/39.95 g) = 0.350 mol Ar.
So the sample's Fe mass, which contains the same number of moles, is determined using the molar mass of iron (Fe) from the periodic table. Iron's molar mass is 55.8 g/mol. Therefore, the mass of the Fe sample is as follows:0.350 mol Fe x 55.8 g/mol = 19.53 g Fe. So, there are 19.53 grams of Fe in a sample of Fe that contains the same number of moles as a 14.0 g sample of Ar.
Learn more about iron (Fe) : https://brainly.com/question/30649367
#SPJ11
One mole of which substance contains a total of 6. 02 X 10²³ atoms
One mole any of which substance contains a total of 6.023 X 10²³ atoms by atoms/molecule.
6.02 X 10²³ units of any given substance make up one mole of that material. The fact that one mole of a material has a mass in grammes that is exactly equal to the substance's formula weight is also significant. As a result, one mole of an element contains 6.02 X 10²³ of the element's atoms and has a mass in grammes equal to the element's atomic weight.
Make sure to be clear about what you're referring to while discussing the diatomic gases, sulphur, and phosphorus, which do not exist as single atoms.
1 mole of substance contains 6.023 X 10²³ molecules.
Volume of solution = 100 mL = 0.1 L
Molarity of solution = 0.02 M
Molarity = number of moles of solute/ Volume of solution (in L)
no. of moles of solute = molarity × volume
=0.02 mol L−1×0.1 L
= 0.002 mol.
Thus, 12.044 x 10²⁰ molecules of H2SO4 are present in 100mL of 0.02 M H2SO4 solution.
Learn more about Mole:
https://brainly.com/question/20432652
#SPJ4
Complete question;
One mole of any substance contains 6.022 × 1023 atoms/molecules. Number of molecules of H2SO4 present in 100 mL of 0.02M H2SO4 solution is.
starting with a 1.00 l of a buffer that is 0.700 m hf and 0.553 m naf, calculate the ph after the addition of 0.100 mol naoh. ka (hf) 7.1 x 10-4
The pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF. The pH is 7.031.
To calculate the pH after the addition of 0.100 mol NaOH to 1.00 L of a buffer that is 0.700 M HF and 0.553 M NaF, we can use the Henderson-Hasselbalch equation.
The Henderson-Hasselbalch equation is: pH = pKa + log ([A-]/[HA])
Where [A-] is the concentration of the anion (in this case, NaF) and [HA] is the concentration of the acid (in this case, HF).
pKa for HF is 7.1 x 10-4
Before we add the 0.100 mol NaOH, the pH of the buffer is:
pH = 7.1 x 10-4 + log ([0.553 M NaF]/[0.700 M HF])
= 7.1 x 10-4 + log(0.787)
= 7.1 x 10-4 + -0.103
= 6.997
Now, let's calculate the concentration of NaOH after we add 0.100 mol of it to the buffer. We know that 1 mole of NaOH will produce 1 mole of OH- ions, so the concentration of OH- ions is 0.100 M.
Since the buffer already contains HF and NaF, the total concentration of anions is 0.653 M.
We can now calculate the new pH using the Henderson-Hasselbalch equation:
pH = 7.1 x 10-4 + log([0.653 M anions]/[0.700 M HF])
= 7.1 x 10-4 + log(0.933)
= 7.1 x 10-4 + -0.069
= 7.031
Therefore, the pH of the buffer after the addition of 0.100 mol NaOH is 7.031.
For more such questions on Henderson-Hasselbalch equation , Visit:
https://brainly.com/question/13423434
#SPJ11
determine the type of alcohol corresponding to each given description or name. an alcohol with two other carbons attached to the carbon with the hydroxyl group
The type of alcohol with two other carbons attached to the carbon with the hydroxyl group is isopropanol or isopropyl alcohol (CH3)2CHOH.
Alcohol is an organic compound with a hydroxyl (OH) group bonded to a saturated carbon atom is called an alcohol. The simplest alcohols are methanol, ethanol, and propanol.The alcohol class is significant because it includes a variety of useful and prevalent compounds. A few examples of alcohols include ethanol, methanol, and isopropyl alcohol, isopropanol.
An alcohol is isopropyl alcohol or isopropanol (CH3)2CHOH, it's a colorless, flammable liquid that has a slightly sweet odor. It is miscible in water and most organic solvents and is used primarily as a solvent and rubbing alcohol. Isopropyl alcohol has been used as an antiseptic since the 1920s. Isopropyl alcohol's antiseptic properties are due to its ability to denature proteins.
Learn more about alcohol at:
https://brainly.com/question/29579537
#SPJ11
for the reaction 2KlO3 —> + 3O2 how many moles of potassium iodate are required to produce 250g of oxygen
To determine the number of moles of KIO3 required to produce 250g of O2, we need to use stoichiometry and the molar mass of O2. the molar mass of O2 The molar mass of O2 is 32 g/mol 16 g/mol for each oxygen atom.
What is an atom ?An atom is the basic unit of matter, consisting of a nucleus of protons and neutrons, with electrons in orbit around the nucleus. Atoms are incredibly small, with a diameter of about 0.1 to 0.5 nanometers. The identity of an element is determined by the number of protons in the nucleus of its atoms.
What is a nucleus ?The nucleus is a dense, positively charged central core of an atom that contains protons and neutrons. It is surrounded by negatively charged electrons that orbit around the nucleus in shells or energy levels. The number of protons in the nucleus determines the atomic number and chemical properties of an element. The nucleus also holds most of the mass of an atom. In summary, the nucleus is the central region of an atom where most of its mass is concentrated, and it is made up of protons and neutrons.
To know more about atom visit :
https://brainly.com/question/30898688
#SPJ1
brainly plutonium-239 has a half life of 24000 yearas and is considered safe only ewhens it radiactively has dropped to 1% of the original level approximately how long the pu-239 be stored securely to be considered safe
Plutonium-239 is a radioactive isotope that has a half-life of 24000 years. When it has decayed to 1% of its original level, it is considered safe.
PLUTONIUM -
As plutonium isotopes decay, they undergo chemical changes. They might change into new elements like uranium or neptunium or into new isotopes of plutonium.
These "daughter products" frequently contain radioactive elements themselves. The atomic number 94 metal element plutonium is radioactive.
Scientists looking for a way to break atoms for use in nuclear weapons made the discovery in 1940. When uranium atoms absorb neutrons in a nuclear reactor, plutonium is produced.
The vast majority of plutonium in the world is produced artificially.
To be considered safe, it must be stored securely for approximately 240,000 years.
How long must the pu-239 be stored securely to be considered safe?
The decay of Plutonium-239 to 1% of its initial level, which is considered safe, requires approximately ten half-lives.
As a result, plutonium-239 must be kept securely for ten times its half-life, or approximately 240,000 years, to be considered safe.
To know more about the plutonium https://brainly.com/question/27920632
#SPJ11
a face-centered cubic cell contains x atoms at the corners of the cell and y atoms at the faces. what is the empirical formula of the solid?
The empirical formula of the solid can be represented as x:y.
The empirical formula of the solid is determined by the ratio of the atoms found at the corners and faces of the face-centered cubic cell.
Since the number of atoms at the corners is represented by x, and the number of atoms at the faces is represented by y, then the empirical formula of the solid can be represented as x:y.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the empirical formula of the solid can be written as 2:6, or 1:3.
The empirical formula of the solid, it is necessary to first determine the total number of atoms that make up the cell.
This can be done by multiplying the number of atoms at the corners (x) by 8, since there are 8 corners in a face-centered cubic cell, and adding the result to the number of atoms at the faces (y).
This total number of atoms can be represented as T, and can be written as T = 8x + y.
The empirical formula of the solid is then determined by dividing the number of atoms at the corners (x) and faces (y) by the total number of atoms (T). This calculation can be written as x/T and y/T.
Therefore, the empirical formula of the solid is determined by the equation x/T:y/T.
For example, if a face-centered cubic cell contains 2 atoms at the corners and 6 atoms at the faces, then the total number of atoms in the cell is 14 (8x2 + 6).
Therefore, the empirical formula of the solid can be calculated as 2/14:6/14, or 1:3.
The empirical formula of the solid in a face-centered cubic cell can be determined by,
calculating the total number of atoms in the cell (8x + y), and then dividing the number of atoms at the corners (x) and faces (y) by this total number. The result is the empirical formula of the solid, which is represented as x:y.
to know more about empirical formula refer here:
https://brainly.com/question/14044066#
#SPJ11
What happens to the charges in current electricity?
Answer:
This is just a quick tip.
Explanation:
An electric current is the movement of particles, starting at the moment when an external voltage is applied at one of the ends of the conductor. That, in turn, generates an electric field on the negatively charged electrons that are attracted to the positive terminal of the external voltage.
In the lab, you modeled the effect of Earth's surface on properties of the atmosphere.
Which general principle of science is shown by the lab?
1. Every system has only two parts, such as Earth's surface and its atmosphere.
2. Each part of a system works independently of the other parts.
3. Changes to one part of a system can affect other parts of the system.
4. A model can describe only one part of a system.
Answer:
The general principle of science shown by the lab is: "Changes to one part of a system can affect other parts of the system."
Explanation:
This principle is also known as the principle of interdependence, which states that parts of a system are interconnected and can influence one another. In this case, the lab modeled how changes to Earth's surface, such as deforestation or urbanization, can affect the properties of the atmosphere, such as temperature and composition.
What salt would be produced by the reaction of H2SO4 with LiHCO3? a) Li2S b) LiSO4
c) Li2SO4 d) Li2CO3
The salt that would be produced by the reaction of H2SO4 with LiHCO3 is option C-Li2SO4.
Lithium sulfate (Li2SO4) is an inorganic compound with the formula Li2SO4. It is a white crystalline material that is soluble in water. The salt would be produced as a result of the following reaction: H2SO4 + LiHCO3 → Li2SO4 + H2O + CO2.
Lithium carbonate (Li2CO3) would not be produced in this reaction because LiHCO3 reacts with H2SO4 to form Li2SO4. Li2S cannot be produced because it requires Li2S2, which is not one of the reactants or products. LiSO4 is not produced because H2SO4 reacts with LiHCO3 to form Li2SO4 instead. Thus, option (c) Li2SO4 is the correct answer.
Learn more about inorganic compounds here:
https://brainly.com/question/17271491
#SPJ11
which of the following is an appropriate use for reflux? to remove the solvent from a reaction mixture to carry out a reaction that needs heating to prepare a sample for filtration
A. to remove the solvent from a reaction mixture
What is a Flux?Flux is a term used to describe the flow of energy, particles, or material in a given area. It is typically used to describe the rate of flow of a certain substance, such as the rate of electrons flowing through a circuit.
Flux is also used to describe the concentration of a certain substance in a given area. For example, the amount of a particular chemical in an environment can be described as a flux. Flux is also used to describe the rate of change in a given system, such as the rate of temperature change in a room over time.
Finally, flux can refer to the rate at which energy is exchanged between two objects, such as the rate of heat exchange between two objects.
Learn more about Flux here:
https://brainly.com/question/29221352
#SPJ1
the density of normal water (the hydrogens do not have neurons) at 20c is 0.9982 g/ml. calculate the density you would expect for heavy water by assuming the deuterium is the same size as normal hydrogen when it is part of the water
The density of heavy water at 20°C is 0.112 g/ml.
The density of normal water at 20°C is 0.9982 g/ml. To calculate the density of heavy water, we need to consider the difference in mass between normal hydrogen (H) and deuterium (D).
Since deuterium has one proton and one neutron, its mass is about twice that of hydrogen.
Assuming the size of deuterium is the same as normal hydrogen when it is part of water, the molar mass of heavy water would be 2 x 1.0079 g/mol (the molar mass of H2O), or 2.0158 g/mol.
Since the density of a substance is equal to the mass of the substance per unit volume, the density of heavy water at 20°C would be equal to 2.0158 g/mol/18 g/mol, which is equal to 0.112 g/ml.
This is approximately 11.2% greater than the density of normal water at 20°C.
Water consists of two hydrogen atoms bonded to one oxygen atom. In the case of normal water, both hydrogen atoms are normal hydrogen (H), while in heavy water, one of the hydrogen atoms is replaced by deuterium (D).
As deuterium is about twice as massive as hydrogen, its presence increases the mass of the molecule, resulting in a higher density.
The density of heavy water at 20°C is approximately 11.2% greater than the density of normal water, due to the presence of deuterium, which has twice the mass of hydrogen.
By assuming the size of deuterium is the same as normal hydrogen, the expected density of heavy water at 20°C by multiplying the molar mass of water (1.0079 g/mol) by two, giving us a density of 0.112 g/ml.
to know more about density refer here:
https://brainly.com/question/15164682#
#SPJ11
a lead fishing sinker is immersed in a solution of fe2 and cu2 . which of the two cations will the lead metal react with? fe2 cu2 write the balanced reaction that will occur. be sure to include the physical states of all species.
The two cations, Fe2+ and Cu2+, present in the solution will react with lead metal to form Pb2+ in lead fishing sinker immersed in a solution of Fe2+ and Cu2+. The balanced reaction that will occur is given below; Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s)
When the lead fishing sinker is immersed in the solution containing Fe2+ and Cu2+, the lead metal will get oxidized to Pb2+ in both the cases, forming two separate reaction equations. Pb(s) + Fe2+(aq) → Pb2+(aq) + Fe(s) (Equation 1)Pb(s) + Cu2+(aq) → Pb2+(aq) + Cu(s) (Equation 2)Here, in the reaction 1, the Fe2+ cation acts as an oxidizing agent and gets reduced to Fe, while the Pb metal gets oxidized to Pb2+.
In reaction 2, the Cu2+ cation acts as an oxidizing agent and gets reduced to Cu, while the Pb metal gets oxidized to Pb2+.Lead is a less reactive metal and gets easily oxidized. This leads to the formation of Pb2+ ions in the solution. The lead metal is immersed in the solution and thus gets oxidized as per the redox reactions mentioned above. The two reactions occur independently in the presence of Fe2+ and Cu2+ ions.
Know more about redox reactions here:
https://brainly.com/question/13293425
#SPJ11
8.
a) Will all of the salt dissolve?
b) What mass of NaNO3 will dissolve at this temperature?
Grams of solute
Oh oh
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
KI
b. 10g of Ce₂(SO4)3 at 10°C.
c. 125g of KNO3 at 60°C.
NH37
d. 65g of NH4Cl at 80°C.
e. 12g of NH3 at 90°C.
NaNO3
KCIO3
KNO3
NHẠC
Ce2(SO4)3
0
0 10 20 30 40 50 60 70 80 90 100
Temperature (°C)
KCI
Naci
Determine if each of the following is unsaturated (U), saturated (S), or
supersaturated (S.S).
a. 55g of NH3 at 20°C.
f. 80g of NaNO3 at 10°C..
g. 145g of NaNO3 at 80°C.
h. 35g of NaCl at 100°C..
Whether a substance dissolves in a particular solvent depends on several factors, including the solubility of the substance in the solvent, the temperature of the solvent, and the amount of substance and solvent involved.
What is solubility?Solubility refers to the ability of a substance to dissolve in a solvent, which is typically a liquid, gas, or solid.
The solubility of salts tends to increase with temperature, so it is likely that more Ce₂(SO₄)₃ will dissolve at higher temperatures and not at 10°C.At 60°C, it is likely that all 125g of KNO₃ will dissolve in the solvent.At 80°C, it is likely that all 65g of NH₄Cl will dissolve in the solvent.55g of NH3 is less than what can dissolve in 1 liter of water at this temperature. Thus, the solution is unsaturated (U).At 10°C, the solubility of NaNO₃ in water is about 80 g/100 mL. Since the amount of NaNO₃ is equal to or less than the maximum amount that can dissolve in 100 mL of water, the solution is saturated (S).At 80°C, the solubility of NaNO₃ in water is about 200 g/100 mL. Since the amount of NaNO₃ is greater than the maximum amount that can dissolve in 100 mL of water, the solution is supersaturated (S.S).At 100°C, the solubility of NaCl in water is about 40 g/100 mL. Since the amount of NaCl is less than the maximum amount that can dissolve in 100 mL of water, the solution is unsaturated (U).To find out more about solubility, visit:
https://brainly.com/question/28170449
#SPJ1
when 25.0 ml of 0.500 m agno3 solution is mixed with 40.0 ml of 0.250 m na2so4, solid ag2so4 precipitates out. what mass of ag2so4 is formed? (the molar mass of ag2so4 is 311.8 g/mol.)
The mass of [tex]Ag_2SO_4[/tex] precipitates out is 3.8975 g
We need to use the stoichiometry of the chemical reaction between [tex]AgNO_3[/tex] and [tex]Na_2SO_4[/tex] to determine how much [tex]Ag_2SO_4[/tex] will be formed. The balanced chemical equation for the reaction is:
[tex]AgNO_3 + Na_2SO_4[/tex] → [tex]Ag_2SO_4 + 2NaNO_3[/tex]
From the equation, we can see that one mole of [tex]AgNO_3[/tex] reacts with one mole of [tex]Na_2SO_4[/tex] to form one mole of [tex]Ag_2SO_4[/tex]. Therefore, the first step is to calculate how many moles of [tex]AgNO_3[/tex]and Na_2SO_4 are present in the solution.Moles of [tex]AgNO_3[/tex] = volume (in L) × molarity
= 0.025 L × 0.500 mol/L
= 0.0125 mol
Moles of [tex]Na_2SO_4[/tex] = volume (in L) × molarity
= 0.040 L × 0.250 mol/L
= 0.010 mol
Since the reaction is 1:1 between [tex]AgNO_3[/tex] and [tex]Na_2SO_4, AgNO_3[/tex]is the limiting reactant, and all of the [tex]AgNO_3[/tex] will react to form [tex]Ag_2SO_4[/tex].The number of moles of [tex]Ag_2SO_4[/tex] formed is equal to the number of moles of [tex]AgNO_3[/tex]:
Moles of Silver nitrate ([tex]Ag_2SO_4[/tex]) = 0.0125 mol
Calculate the mass of [tex]Ag_2SO_4[/tex]:
Mass of [tex]Ag_2SO_4[/tex]= moles of [tex]Ag_2SO_4[/tex] × molar mass
Mass of [tex]Ag_2SO_4[/tex] = 0.0125 mol × 311.8 g/mol
Mass of [tex]Ag_2SO_4[/tex] = 3.8975 g
Therefore, the mass of [tex]Ag_2SO_4[/tex] formed is 3.8975 g.
Learn more about Silver nitrate: brainly.com/question/30488792
#SPJ11
we know that most solids are more soluble in warm water than in cold water. does thesolubility of nh4cl fit this pattern? explain
Yes, the solubility of NH4Cl fits the pattern that most solids are more soluble in warm water than in cold water.
On increasing the temperature of the solvent, the solubility of the solute increases. The solubility of NH4Cl, which is an example of a solid, follows this trend. In other words, ammonium chloride (NH4Cl) dissolves more readily in warm water than in cold water.
When water is heated, the kinetic energy of the water molecules increases, causing them to move more rapidly. As a result, more space is created in the water, allowing it to dissolve more solute.
NH4Cl is a soluble salt that dissolves in water with a pH value of less than 7. It is readily soluble in water, with a solubility of 372 g/L at 20 degrees Celsius. As a result, increasing the temperature will increase the solubility of NH4Cl.
Learn more about solids: https://brainly.com/question/19974931
#SPJ11
for the reaction, determine how many moles of chlorine cl2 would be needed to react with 3 moles of phosphorus p4 to entirely use up all the phosphorus
For the given reaction, the moles of chlorine required to react with 3 moles of phosphorus to completely use up all the phosphorus.
The balanced chemical equation for the reaction is:
P4 + 6Cl2 → 4PCl3
Now, the stoichiometric ratio between P4 and Cl2 can be seen from the balanced equation as 1 mole of P4 reacts with 6 moles of Cl2.
So,
3 moles of P4 will require= 6 moles of Cl2 × (3 moles of P4 / 1 mole of P4)= 18 moles of Cl2
Therefore, 18 moles of Cl2 would be required to react with 3 moles of P4 to entirely use up all the phosphorus.
Note:
The balanced chemical equation is used to calculate the moles of reactants and products involved in a chemical reaction.
The mole ratio between the reactants and products can be determined from the balanced chemical equation.
To know more about the moles https://brainly.com/question/26416088
#SPJ11
a mixture containing nitrogen and hydrogen weighs 3.54 g and occupies a volume of 7.48 l at 305 k and 1.03 atm. calculate the mass percent of n2. assume ideal-gas behavior and report answer as a percent. (3 sf) [1.24]
Answer: Mass percent N2 = 79.55% (to 3 significant figures).
To calculate the mass percent of N2 in the mixture, first calculate the molar mass of the mixture, which is:
Molar mass = (3.54g * 1 mol/28.0134 g) + (7.48 l * 1.03 atm * 0.08206 l * atm / (305 K * 0.7302 mol/g))
Molar mass = 3.542 g/mol
Then, calculate the mass percent of N2 in the mixture:
Mass percent N2 = (28.0134 g * 1 mol/3.542 g) * 100%
Mass percent N2 = 79.55% (to 3 significant figures).
Learn more about Mass percent here:
https://brainly.com/question/5394922#
#SPJ11
Which of the following does "cup A" represent in the experimental set-up?
independent variable - it is changed for each group to test for results
dependent variable - it is what is measured
control - it is kept the same (no experimental treatment) to keep the results reliable
none of the above
Cup A represents the independent variable in the experimental set-up. An independent variable is a variable that is changed for each group in an experiment to see what effect it has on the results.
In this case, Cup A is the independent variable because it is the one that is being changed or manipulated in the experiment. For example, in this set-up, cup A might contain different amounts of a certain nutrient to see how it affects the growth of the plants. The dependent variable is what is measured, such as the growth rate of the plants. The control is kept the same (no experimental treatment) to keep the results reliable and to act as a comparison to the experimental results. This control is used to make sure that any changes in the dependent variable are due to the independent variable and not some other factor.
To learn more about independent variable click here https://brainly.com/question/1479694
#SPJ1
how the temperature and vapor pressure are related knowing the enthalpy of vaporization at the boiling temperature
the buret will be filled with 0.3000 m hcl and 25 ml of 0.40 m nahco3 solution will be in the beaker with methyl orange as the indicator. write a complete balanced equation for the neutralization reaction between hcl and nahco3.
The complete balanced equation for the neutralization reaction between HCl and NaHCO₃ is:
HCl + NaHCO₃ → NaCl + H₂O + CO₂
The reaction between hydrochloric acid (HCl) and sodium bicarbonate (NaHCO₃) is known as a neutralization reaction. In this reaction, HCl and NaHCO₃ combine to produce NaCl, water, and carbon dioxide.
The reaction can be represented by the following equation: HCl + NaHCO₃ → NaCl + H₂O + CO₂
This reaction already the balanced chemical equation for the reaction since the number of each element in the reactant side is equal to the number of each element in the product side.
Learn more about balanced equation here: https://brainly.com/question/11904811.
#SPJ11
a saturate solution of lead (ii) chloride (pbcl2) has a ksp value of 17.10-5. if 0.90 moles of chloride ions (cl-) is added to the solution, what will be the concentration of lead ions be in solution?
Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M. The chemical equation describing how lead (II) chloride dissolves in water Pb2+ (aq) + 2Cl- PbCl2 (s) (aq) For this reaction.
Ksp = [Pb2 +] [Cl -] 2 We are provided that the Ksp value of PbCl2 is 1.7 × 10^-5. Also, we are informed that 0.90 moles of Cl- ions have been added to the mixture. We may assume that the concentration of Pb2+ ions is insignificant compared to the concentration of Cl- ions since the stoichiometry of the reaction is 1:2 for Pb2+:Cl-. Let x be the concentration of Pb2+ ions in the solution. Then, the concentration of Cl- ions is 2x (because the stoichiometry is 1:2 for Pb2+:Cl-). The total concentration of Cl- ions in the solution is therefore:
[Cl-]total = 2x + 0.90
Since the solubility product expression for[tex]PbCl2 is Ksp = [Pb2+][Cl-]^2, \\[/tex]we can write:
[tex]Ksp = x(2x + 0.90)^2Solving for x, we get:x = 0.0098 M[/tex]
Therefore, the concentration of Pb2+ ions in the solution is 0.0098 M.
learn more about chemical equation here:
https://brainly.com/question/30087623
#SPJ4
Answer:
Explanation:
The statement mentioned in the question is not a question. However, I can provide some information related to the given statement.Nickel(II) chloride refers to the chemical compound with the formula NiCl2. It is also known as Nickelous chloride. When nickel(II) chloride is dissolved in water, it forms a saturated solution of concentration 1 M (1 mole/Liter). A saturated solution refers to the solution in which no more solute can be dissolved in it at a given temperature and pressure.To summarize, the given statement means that if you dissolve nickel(II) chloride in water, you will obtain a saturated solution of concentration 1 M (1 mole/Liter).
will the lattice energy for lif be larger or smaller than that of lii? group of answer choices larger smaller
The lattice energy for LiF will be greater than that of LiI.
Thus, the correct answer is larger.
What is lattice energy?Lattice energy, also known as lattice enthalpy, is the energy that must be supplied to completely separate one mole of an ionic compound into its gaseous ions. The lattice energy of an ionic compound depends on two things: the charge on the ions and the size of the ions.
This energy can be calculated by subtracting the energy required to separate the ions from the energy gained when the ions bond. The reason why the lattice energy of LiF is higher than that of LiI is the smaller the ions and the higher the charge, the more energy will be released when they come together to form a crystal lattice. Li+ and F- ions are both smaller in size and higher in charge than Li+ and I- ions, respectively.
As a result, the lattice energy of LiF will be larger than that of LiI.
For more information about Lattice energy refers to the link: https://brainly.com/question/18222315
#SPJ11
if a zero order reaction has a half-life of 350 s when the initial reactant concentration is 1.50 m, how long until 0.1% of the reactant remains?
It will take 3401 seconds for 0.1% of the reactant to remain.
The half-life of a zero-order reaction is the time taken for the concentration of the reactant to decrease by half. This can be calculated using the equation:
t1/2 = 0.693/k
Where k is the rate constant of the reaction. The amount of time it takes for 0.1% of the reactant to remain, we can use the following equation:
t = (-log(0.001))/k
The rate constant of the reaction can be calculated as:
k = 0.693/t1/2 = 0.693/350 = 0.001988
t = (-log(0.001))/k = (-log(0.001))/0.001988 = 3401 seconds
Therefore, it will take 3401 seconds for 0.1% of the reactant to remain.
to know more about reactant refer here:
https://brainly.com/question/17096236#
#SPJ11
A rigid container with a volume of 35.0 mL is filled with enough gas to have a
pressure of 2.62 atm and then sealed so no more gas could enter and none could
leave. The original temperature is 298.52 K and the final temperature is 357.30
K. What is the pressure in the container at the higher temperature.
The pressure in the container at the higher temperature would be 3.37 atm.
Ideal gas equationTo solve this problem, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the universal gas constant, and T is the temperature in Kelvin.
Since the container is sealed and the number of moles of gas cannot change, we can set the initial and final pressures and volumes equal to each other, and solve for the final pressure:
P1V1/T1 = P2V2/T2
Where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2 and T2 are the final pressure and temperature, respectively.
Substituting the given values, we get:
2.62 atm × 35.0 mL / 298.52 K = P2 × 35.0 mL / 357.30 K
Simplifying, we get:
P2 = (2.62 atm × 35.0 mL / 298.52 K) × (357.30 K / 35.0 mL)
P2 = 3.37 atm
Therefore, the pressure in the container at the higher temperature is approximately 3.37 atm.
More on the ideal gas equation can be found here: https://brainly.com/question/28837405
#SPJ1
ms. salis explains to her class that sodium (na) and chlorine (cl) atoms bond to make table salt (nacl). which is the best description of table salt?
Two elements, sodium (Na) and chlorine (Cl) come together, they form a compound called sodium chloride (NaCl), which is also known as table salt.
Table salt is that it is a chemical ionic compound made up of sodium and chlorine atoms that are bonded together.
Table salt is one of the most common chemical compounds found on earth. It is a white, crystalline substance that is highly soluble in water. It is used in many ways, including cooking, preserving food, and as a seasoning.
Table salt has a number of properties that make it useful in various applications. It is highly reactive with other chemicals, which makes it a good cleaning agent.
It is also highly conductive, which makes it useful in electrochemical applications. Additionally, it is non-toxic, which makes it safe to use in food applications.
Learn more about table salt here:
https://brainly.com/question/5528908
#SPJ11
which of the following are not results of adding a catalyst to a chemical system at equilibrium? select all that apply: the forward and reverse reaction rates are increased. the reaction quotient decreases. the reaction quotient is unaffected. the equilibrium constant increases.
Adding a catalyst to a chemical system at equilibrium does not result in the reaction fraction decreasing and the equilibrium constant increasing. Here options B and D are the correct answer.
Adding a catalyst to a chemical system at equilibrium can increase the rate of both the forward and reverse reactions, but it does not change the position of the equilibrium. The following are the possible effects of adding a catalyst:
A) The forward and reverse reaction rates are increased. This statement is true. A catalyst provides an alternate reaction pathway with a lower activation energy, which means more molecules can react in a given amount of time, resulting in an increase in both the forward and reverse reaction rates.
B) The reaction quotient decreases. This statement is not necessarily true. The reaction quotient (Q) depends on the concentrations of the reactants and products at any given point during the reaction. Adding a catalyst does not affect the concentrations of the reactants and products, so the reaction quotient remains the same.
C) The reaction quotient is unaffected. This statement is true. As mentioned above, the reaction quotient depends on the concentrations of the reactants and products, which are not affected by the addition of a catalyst.
D) The equilibrium constant increases. This statement is not true. The equilibrium constant is a constant value that depends only on the temperature and the stoichiometry of the balanced chemical equation. Adding a catalyst does not change the equilibrium constant value.
To learn more about chemical systems
https://brainly.com/question/12208104
#SPJ4
Complete question:
Which of the following are not the results of adding a catalyst to a chemical system at equilibrium? select all that apply:
A - the forward and reverse reaction rates are increased.
B - the reaction quotient decreases.
C - the reaction quotient is unaffected.
D - the equilibrium constant increases.
Using the formula M1V1 = M2V2, how many millimeters of 6.0M sodium hydroxide are required to prepare 2.0L of a 1.0M sodium hydroxide solution?
Question Options:
200 mL
1200 mL
300 mL
330 mL
Answer: 330 i just took the test
Explanation:
330 mL of 6.0M sodium hydroxide are required to prepare 2.0L of a 1.0M sodium hydroxide solution. This is done by Molarity method.
What is Molarity?A substance's concentration in a liquid is referred to as its molarity, or molar concentration. The substance being dissolved is referred to as a solute, while the liquid is referred to as a solvent. The number of moles per liter is the precise definition of molarity.
Solids, other liquids, or even gases can all dissolve into a liquid and become a solute. Finding molarity is straightforward if you are aware of the solute's molecular weight and the amount of solvent it is dissolved in.
Using the formula M₁×V₁ = M₂×V₂
M₁ = 6.0 M
M₂ = 1.0 M
V₂ = 2.0 L
substituting the values ,
V₁ = 330 mL
To know more about molarity , visit ;
brainly.com/question/8732513
#SPJ1