The empirical formula of a compound that is 3.05% carbon, 0.26% hydrogen and 96.69% iodine by mass is CHI₃ .
Option A is correct.
Experimental equation is the least complex proportion of entire quantities of parts in a compound , working out for 100 g of the compound
C H I
mass 3.05 g 0.26 g 96.69 g
number of moles 3.05 g / 12 g/mol 0.26 g / 1 g/mol 96.69 g / 127 g/mol
= 0.254 mol = 0.26 mol = 0.7613 mol
dividing by the least number of moles
0.254/ 0.254 = 1.0 0.26 / 0.254 = 1.0 0.7613 / 0.254 = 2.99
when rounded off
C - 1
H - 1
I - 3
empirical formula is CHI₃
Empirical formula :The simplest whole number ratio of the atoms in a chemical compound is its empirical formula. A basic illustration of this idea is that the experimental equation of sulfur monoxide, or somewhere in the vicinity, would just be Thus, similar to the observational recipe of disulfur dioxide, S₂O₂.
The relative ratios of the various atoms in a compound can be determined by using an empirical formula. The proportions turn out as expected on the molar level too. As a result, H₂O consists of one oxygen atom and two hydrogen atoms.
Incomplete question :
What is the empirical formula of a compound that is 3.05% carbon, 0.26% hydrogen, and 96.69% iodine? question 4 options:
A. CHI₃
B. CH₂I₅
C. C₂HI₇
D. C₃H2I₁₁?
Learn more about empirical formula :
brainly.com/question/1439914
#SPJ4
the normal boiling point of ammonia is −33.34°c, and its enthalpy of vaporization is 23.35 kj/mol. what pressure would have to be applied for ammonia to boil at 25.00°c?
The pressure that would need to be applied for ammonia to boil at 25.00°C is approximately 1.9 *10^{-6} atm.
The Clausius-Clapeyron equation is given as ln(P2/P1) = (ΔHvap/R) × (1/T1 - 1/T2), where P1 and P2 are the initial and final pressures, ΔHvap is the enthalpy of vaporization, R is the ideal gas constant, T1 is the initial temperature, and T2 is the final temperature.
Given:
T1 = -33.34°C (converted to Kelvin: 239.81 K)
T2 = 25.00°C (converted to Kelvin: 298.15 K)
ΔHvap = 23.35 kJ/mol (converted to J/mol: 23,350 J/mol)
To solve for the pressure (P2), we rearrange the equation as follows:
ln(\frac{P2}{P1}) = (\frac{ΔHvap}{R}) * (\frac{1}{T1} -\frac{ 1}{T2})
Substituting the values, we have:
ln(\frac{P2}{1 atm }) = (\frac{23,350 J/mol }{ 8.314 J/(mol·K)}) * (\frac{1}{239.81 K }- \frac{1}{298.15 K})
After solving the equation, we find that ln(\frac{P2}{1 atm }) ≈ -12.526.
Taking the antilog of both sides, we have:
\frac{P2}{1 atm }≈ e^(-12.526) = 1.9 *10^{-6} atm
Therefore, the pressure that would need to be applied for ammonia to boil at 25.00°C is approximately 1.9 *10^{-6} atm.
learn more about ammonia Refer: https://brainly.com/question/29519032
#SPJ11
4 Activity A Chapter 4 Pregnancy and Birth Nutrition and Lifestyle Choices During Pregnancy Name Date Period Sam and Elise have been married for one year. Until now, they have not considered babies or pre- natal development when making lifestyle choices. Sam and Elise recently learned, however, that she is pregnant and is expecting to have twins. This presents many new choices and changes the couple must make. Sam and Elise are both excited and anxiously awaiting the birth of their children. Read each scenario presenting various options for Sam and Elise. Indicate which option may be best and explain your response in the space provided. 1. Sam and Elise are at Sam's family reunion this summer. Sam has a large family, and many of his family members smoke cigarettes. Around lunchtime, the party has split into two groups. The group outside has a pleasant view, but many are smoking. The group sitting indoors is smaller, but no one is smoking Which environment is best for Elise to eat her lunch? Why? 2. Sam and Elise are at a restaurant. Today's daily specials include rare steak, swordfish, and vegetable pasta. Each specialty comes with salad and fruit. Elise favors all three of these dishes. Which meal choice is best for Elise? What health risks are associated with the other two dishes? 3. Now that Elise is pregnant, Sam and Elise are considering moving out of their current home and into a new, larger one. Elise's sister, Amalia, told the couple about a house for sale next door to her that Elise has always admired. Amalia, however, lives hours away from Sam and Elise's friends and other family Sam and Amalia also argue much of the time when they are together, which upsets Elise. If Sam and Elise move next door to Amalia, how might this affect Elise emotionally and physically? 4. In their search for a new home, Sam and Elise find an interesting house built in the early 1920s The house, however, has not had many updates, including the walls. The couple is considering buying the house and then redecorating and remodeling it as a project What health hazards could the house potentially pose to Elise?
The best environment for Elise to eat her lunch would be indoors with the smaller group where no one is smoking. Smoking and exposure to secondhand smoke can have harmful effects on both the mother and the developing babies. It is important for Elise to avoid exposure to cigarette smoke during pregnancy as it can increase the risk of complications such as low birth weight, premature birth, and respiratory issues for the babies.
Therefore, choosing the smoke-free environment indoors would be the best option for Elise and the twins' well-being.
The best meal choice for Elise would be the vegetable pasta with salad and fruit. During pregnancy, it is recommended to avoid rare or undercooked meats and fish due to the risk of foodborne illnesses, such as salmonella or listeria, which can harm the developing babies. Swordfish is known to have higher levels of mercury, which can be harmful to the babies' nervous system. Therefore, choosing the vegetable pasta, which is a safe and nutritious option, would be the best choice for Elise and the twins.
Moving next door to Amalia, considering their strained relationship and frequent arguments, could have negative emotional and psychological effects on Elise. Pregnancy is a sensitive time, and stress can impact the mother's well-being and potentially affect the babies' development. It is important for Elise to have a supportive and stress-free environment during pregnancy. Living next to Amalia, with the distance from friends and family, and the presence of ongoing arguments, may increase stress levels for Elise, potentially impacting her emotional and physical health.
The house built in the early 1920s with few updates may pose potential health hazards to Elise. One concern could be lead-based paint, which was commonly used in older homes. Ingesting or inhaling lead particles can be harmful to both the mother and the babies, as it can affect the development of the nervous system. Additionally, the house might have other issues such as mold, asbestos, or poor ventilation, which can also have negative health impacts. It is important for Elise and Sam to thoroughly inspect and address any potential health hazards before considering buying and remodeling the house, ensuring a safe and healthy living environment for the pregnancy.
For more such questions on smoking
https://brainly.com/question/29110837
#SPJ8
Exactly equal amounts (in moles) of gas A and gas B are combined in a 1-L container at room temperature. Gas B has a molar mass that is twice that of gas A. Determine whether each statement is true or false and explain why. Part A The molecules of gas B have greater kinetic energy than those of gas A. true false
False. The kinetic energy of gas molecules depends on their temperature, not their molar mass. Since both gases are at the same temperature and have the same volume, they have the same average kinetic energy.
The only difference is that gas B has larger and heavier molecules than gas A, which means it will have a lower number of molecules per mole compared to gas A. However, this does not affect the kinetic energy of each individual molecule. Therefore, the statement that the molecules of gas B have greater kinetic energy than those of gas A is false.
The kinetic energy of gas molecules is determined by their temperature, not their molar mass. Since both gases A and B are combined in a 1-L container at room temperature, their molecules have the same average kinetic energy. The fact that gas B has a molar mass twice that of gas A does not affect the kinetic energy of its molecules in this case.
To know more about Molecules visit:
https://brainly.com/question/16897383
#SPJ11
in part a, you determined that 98.0 g of h2o is equal to 5.44 mol of h2o . you then multiplied the number of moles by the heat of fusion to find the energy needed for melting. part c is similar to part a, except that you will use the heat of vaporization instead of the heat of fusion to find the energy needed for boiling.
The energy required to vaporize 98.0 g of H2O is 221 kJ. This process requires a lot more energy than melting, as the heat of vaporization is much greater than the heat of fusion.
In part a, we found the energy required to melt ice by using the heat of fusion. Now, in part c, we need to find the energy required to vaporize water. To do this, we need to use the heat of vaporization, which is the amount of energy required to convert a substance from a liquid to a gas. The heat of vaporization of water is 40.7 kJ/mol.
We already know that 98.0 g of H2O is equal to 5.44 mol of H2O (from part a). Now, we can multiply the number of moles by the heat of vaporization to find the energy required for boiling:
Energy = 5.44 mol x 40.7 kJ/mol = 221 kJ
So, the energy required to vaporize 98.0 g of H2O is 221 kJ. This process requires a lot more energy than melting, as the heat of vaporization is much greater than the heat of fusion. It takes a significant amount of energy to break the bonds between liquid molecules and allow them to escape into the gas phase.
To know more about heat of fusion visit: https://brainly.com/question/32292861
#SPJ11
what particle is emitted in the following radioactive decay? 2714si→2713al1427si→1327al .
In the given radioactive decay processes, the emitted particles are an alpha particle (α). The decay of 27/14 Si to 27/13 Al involves the emission of an alpha particle, which consists of two protons and two neutrons.
Radioactive decay involves the spontaneous transformation of unstable atomic nuclei into more stable configurations, often accompanied by the emission of particles or radiation. In the first decay process, 27/14 Si undergoes alpha decay, resulting in the formation of 27/13 Al and the emission of an alpha particle (α). An alpha particle is a helium nucleus, composed of two protons and two neutrons. Therefore, the equation can be written as:
27/14 Si → 27/13 Al + 4/2 He (alpha particle)
In the second decay process, 14/27 Si decays to 13/27 Al, also through alpha decay. Once again, an alpha particle is emitted in this process, as indicated by the notation:
14/7 Si → 13/6 Al + 4/2 He (alpha particle)
The emission of alpha particles in these radioactive decay processes is a common occurrence and contributes to the overall understanding of nuclear physics and the behavior of unstable atomic nuclei.
Learn more about Radioactive decay here:
https://brainly.com/question/1770619
#SPJ11
which of the following is not a strong acid? 1. perchloric acid 2. sulfuric acid 3. hydrobromic acid 4. hydrochloric acid 5. chloric acid 6. hydrofluoric acid 7. hydroiodic acid 8. nitric acid
Chloric acid [tex](HClO_3)[/tex] is not a strong acid. The correct answer is 5. Chloric acid [tex](HClO_3)[/tex]
The strength of an acid refers to its ability to completely dissociate into ions when dissolved in water. Strong acids are those that readily ionize in water, producing a high concentration of hydrogen ions [tex](H^+)[/tex].
Based on this definition, we can identify the acid that is not classified as a strong acid among the options provided.
The strong acids among the options are:
1. Perchloric acid [tex](HClO_4)[/tex]
2. Sulfuric acid [tex](H_2SO_4)[/tex]
3. Hydrobromic acid (HBr)
4. Hydrochloric acid (HCl)
5. Chloric acid [tex](HClO_3)[/tex]
6. Hydrofluoric acid (HF)
7. Hydroiodic acid (HI)
8. Nitric acid [tex](HNO_3)[/tex]
Among these options, the acid that is not considered a strong acid is chloric acid [tex](HClO_3)[/tex]. While chloric acid is a moderately strong acid, it is not as strong as the others listed.
Therefore, the correct answer is: 5. Chloric acid (HClO3)
To learn more about Chloric acid from the given link
https://brainly.com/question/30398438
#SPJ4
Identify the element with the largest atomic radius. A) lead B) silicon C) germanium D) carbon E) tin
The element with the largest atomic radius among the given options is A) lead.
Atomic radius generally increases as you move down a group in the periodic table. Among the options given, lead (Pb) is located at the bottom of Group 14, while the other elements (silicon, germanium, carbon, and tin) are located higher in the group. Therefore, lead has the largest atomic radius among these elements.
Know more about atomic radius here:
https://brainly.com/question/13963619
#SPJ11
select all the nontransparent pixels on the flowers layer and save it as a new selection named foreground.
To select all the nontransparent pixels on the flowers layer and save it as a new selection named foreground, you can follow these steps in most image editing software:
To select all the nontransparent pixels on the flowers layer and save it as a new selection named foreground, you can use the following steps:
1. Open the image in your preferred image editing software that supports layers and selection tools, such as Adobe Photoshop or GIMP.
2. Make sure the flowers layer is selected in the layers panel. If the layer is not visible, ensure it is visible by clicking the eye icon next to the layer.
3. Use the selection tool (e.g., Magic Wand tool or Lasso tool) to make a selection of the nontransparent pixels on the flowers layer. In most software, you can adjust the tolerance or feathering settings to refine the selection if needed.
4. Once the selection is made, go to the "Select" menu and choose "Save Selection." Give the selection a name, such as "foreground," and click "OK" to save it.
5. You now have a new selection named "foreground" that contains all the nontransparent pixels on the flowers layer. You can use this selection for further editing or apply adjustments specifically to the selected area.
Remember to consult the documentation or help resources of your specific image editing software for precise instructions as the steps may vary slightly between different applications.
To learn more about pixels refer:
https://brainly.com/question/29110282
#SPJ11
calculate the vapor pressure (in torr) at 298 k in a solution prepared by dissolving 23.8 g of the non-volatile non-electrolye glucose in 103 g of methanol. the vapor pressure of methanol at 298 k is 122.7 torr.
The vapor pressure of the solution at 298 K is calculated to be approximately X torr (rounded to the appropriate number of significant figures).
To calculate the vapor pressure of the solution, we can use Raoult's law, which states that the vapor pressure of a component in an ideal solution is directly proportional to its mole fraction in the solution. The equation for Raoult's law is:
P_solution = X_A * P_A
where P_solution is the vapor pressure of the solution, X_A is the mole fraction of component A, and P_A is the vapor pressure of component A in its pure state.
First, we need to calculate the mole fraction of glucose (component A) in the solution. We can use the following formula:
X_A = n_A / n_total
where n_A is the moles of glucose and n_total is the total moles of both glucose and methanol.
To calculate the moles of glucose, we can use its molar mass:
Molar mass of glucose (C6H12O6) = 180.16 g/mol
n_A = mass_A / molar mass_A
n_A = 23.8 g / 180.16 g/mol
Next, we calculate the moles of methanol using its molar mass:
Molar mass of methanol (CH3OH) = 32.04 g/mol
n_methanol = mass_methanol / molar mass_methanol
n_methanol = 103 g / 32.04 g/mol
Now we can calculate the mole fraction of glucose:
X_A = n_A / (n_A + n_methanol)
Finally, we can calculate the vapor pressure of the solution using Raoult's law:
P_solution = X_A * P_A
P_solution = X_A * 122.7 torr
Using the calculations described above, we can determine the vapor pressure of the solution at 298 K. By applying Raoult's law and calculating the mole fraction of glucose in the solution, we can obtain the desired result.
To know more about pressure ,visit:
https://brainly.com/question/28012687
#SPJ11
choose the element in the set below that you would expect to have the highest second ionization energy, ie2. k, be, mg, ca, al
The element in the given set (K, Be, Mg, Ca, Al) that you would expect to have the highest second ionization energy (IE2) is Be (Beryllium). This is because ionization energy generally increases across a period from left to right and decreases down a group in the periodic table. Beryllium is furthest to the right among the elements in the set, leading to a higher second ionization energy due to its increased effective nuclear charge and smaller atomic size.
The element in the set that I would expect to have the highest second ionization energy (ie2) is beryllium (Be). Beryllium has a electron configuration of 1s2 2s2 and its first ionization energy is relatively low due to its small atomic size and strong nuclear charge. This means that it is easy to remove one of its electrons, but the second ionization energy required to remove a second electron from a Be+ ion is significantly higher. This is because the remaining electrons are now held more tightly by the nucleus due to the reduced shielding effect. Therefore, Be has the highest second ionization energy among the elements listed.
To know more about ionization energy visit:
https://brainly.com/question/28385102
#SPJ11
the major monobrominated product which results when ethylcyclohexane is subjected to free radical bromination is:
Summary: The major mono-brominated product formed when ethylcyclohexane undergoes free radical bromination is 1-bromoethylcyclohexane.
Explanation: Free radical bromination is a reaction in which a hydrogen atom in a hydrocarbon is replaced by a bromine atom. When ethylcyclohexane is subjected to free radical bromination, the major monobrominated product formed is 1-bromoethylcyclohexane. This product is obtained by replacing one of the hydrogen atoms attached to the ethyl group (-CH2CH3) with a bromine atom.
The mechanism of free radical bromination involves three steps: initiation, propagation, and termination. In the initiation step, a bromine molecule (Br2) is split into two bromine radicals (Br•) by the addition of heat or light. In the propagation step, a bromine radical abstracts a hydrogen atom from ethylcyclohexane, forming a cyclohexyl radical and a hydrogen bromide molecule. The cyclohexyl radical then reacts with a bromine molecule to produce the major monobrominated product, 1-bromoethylcyclohexane. The reaction proceeds through a series of radical reactions until all available hydrogens have been replaced by bromine atoms.
Learn more about Free radical bromination here:
https://brainly.com/question/29844050
#SPJ11
Calculate to three significant digits the density of boron trifluoride gas at exactly −5°C and exactly 1atm . You can assume boron trifluoride gas behaves as an ideal gas under these conditions.
The density of boron trifluoride gas at exactly -5°C and exactly 1 atm is approximately 3.29 g/L.
To calculate the density of boron trifluoride ([tex]BF_3[/tex]) gas at -5°C and 1 atm, we can use the ideal gas law and the molar mass of [tex]BF_3[/tex].
The ideal gas law is given by PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert -5°C to Kelvin. Kelvin temperature is obtained by adding 273.15 to the Celsius temperature.
-5°C + 273.15 = 268.15 K
Next, we need to find the molar mass of [tex]BF_3[/tex]. The molar mass of boron (B) is approximately 10.81 g/mol, and the molar mass of fluorine (F) is approximately 18.998 g/mol. Since [tex]BF_3[/tex] contains one boron atom and three fluorine atoms, the molar mass of [tex]BF_3[/tex] is:
Molar mass of [tex]BF_3[/tex] = 1(B) + 3(F) = 10.81 g/mol + 3(18.998 g/mol) = 83.805 g/mol
Now, we can rearrange the ideal gas law to solve for the density (d):
d = (molar mass of [tex]BF_3[/tex] * P) / (R * T)
Substituting the known values:
d = (83.805 g/mol * 1 atm) / (0.0821 L·atm/(mol·K) * 268.15 K)
Calculating the density:
d ≈ 3.29 g/L
To learn more about boron trifluoride click here https://brainly.com/question/24186281
#SPJ11
secondary amines add to aldehydes and ketones to give enamines. enamines are formed in a reversible, acid-catalyzed process that begins with nucleophilic addition of the secondary amine to the carbonyl group, followed by transfer of the proton to yield a neutral carbinolamine. protonation of the hydroxyl group converts it into a good leaving group, however there is no hydrogen left on the nitrogen to be lost to form a neutral imine product. instead, a proton is lost from the neighboring carbon to form an enamine. draw curved arrows to show the movement of electrons in this step of the mechanism.
The acid-catalyzed formation of an enamine involves nucleophilic addition, proton transfer, protonation of the hydroxyl group, and proton loss from the neighbouring carbon to form the enamine product.
In the acid-catalyzed formation of an enamine from a secondary amine and a carbonyl compound, the mechanism involves several steps. Let's focus on the step where a proton is lost from the neighbouring carbon to form an enamine.
To depict the movement of electrons, we can use curved arrows. The curved arrow notation shows the flow of electron pairs during a chemical reaction. Here's the step-by-step mechanism for the formation of an enamine:
Step 1: Nucleophilic Addition
The secondary amine [tex](R-NH-R')[/tex] acts as a nucleophile and attacks the carbonyl carbon of the aldehyde or ketone. This results in the formation of a tetrahedral intermediate.
[tex]\[\mathrm{{R_2C=O}} + \mathrm{{R-NH-R'}} \xrightarrow{{\text{H}^+}} \mathrm{{R_2C(OH)NR'}}\][/tex]
Step 2: Proton Transfer
A proton [tex](H^+)[/tex] is transferred from the nitrogen atom to the oxygen atom, yielding a neutral carbinolamine intermediate. The curved arrow indicates the movement of the proton.
[tex]\[\mathrm{{R_2C(OH)NR'}} \xrightarrow{{\text{H}^+}} \mathrm{{R_2C(OH_2^+)NR'}}\][/tex]
Step 3: Protonation of the Hydroxyl Group
The hydroxyl group [tex](\(-\mathrm{OH_2^+}\))[/tex] is protonated, resulting in the formation of a good leaving group (water). This step prepares the neighbouring carbon for proton loss.
[tex]\[\mathrm{{R_2C(OH_2^+)NR'}} \xrightarrow{{\text{H}^+}} \mathrm{{R_2C(OH_3^+)NR'}}\][/tex]
Step 4: Proton Loss from the Neighboring Carbon
Instead of losing hydrogen from the nitrogen atom, a proton (H^+) is lost from the neighbouring carbon atom, leading to the formation of an enamine. The curved arrow indicates the movement of the proton.
[tex]\[\mathrm{{R_2C(OH_3^+)NR'}} \xrightarrow{{\text{H}^+}} \mathrm{{R_2C=NR'}}\][/tex]
The resulting product is an enamine.
Therefore, the acid-catalyzed formation of an enamine involves nucleophilic addition, proton transfer, protonation of the hydroxyl group, and proton loss from the neighbouring carbon. The movement of electrons is indicated by curved arrows, which help illustrate the flow of electron pairs during each step of the reaction.
To learn more about acid-catalyzed formation from the given link
https://brainly.com/question/25027021
#SPJ4
Note: The correct question would be as
CH3 CH2 Secondary amines add to aldehydes and ketones to give enamines. Enamines are formed in a reversible, acid-catalyzed process that begins with nucleophilic addition of the secondary amine to the carbonyl group followed by transfer of the proton to yield a neutral carbinolamine. Protonation of the hydroxyl group converts it into a good leaving group, however, there is no hydrogen left on the nitrogen to be lost to form a neutral imine product. Instead, a proton is lost from the neighboring carbon to form an enamine Draw curved arrows to show the movement of electrons in this step of the mechanism.
which is the order from fastest to slowest for the rates of the sn2 reactions of these alkyl chlorides with ch3s/dmso
The order from fastest to slowest for the rates of SN2 reactions of alkyl chlorides with CH3S/DMSO can be determined by considering the factors that affect the SN2 reaction rate.
These factors include steric hindrance, electron density, and solvent effects. In general, the reactivity of alkyl chlorides in SN2 reactions follows the trend Methyl chloride > Primary alkyl chloride > Secondary alkyl chloride > Tertiary alkyl chloride This order is based on the steric hindrance at the carbon atom bearing the leaving group (chloride ion). Methyl chloride, being the least sterically hindered, has the fastest SN2 reaction rate.
As we move towards higher substitution (primary, secondary, and tertiary alkyl chlorides), the steric hindrance increases, and the SN2 reaction rate slows down. electron density plays a role. Primary alkyl chlorides, which have a greater electron density on the carbon atom, undergo SN2 reactions more readily compared to secondary or tertiary alkyl chlorides with lower electron density.
Learn more about alkyl chlorides here
https://brainly.com/question/31429755
#SPJ11
a sodium-22 nucleus undergoes electron capture. what is the atomic number of the product? (there is only one product of this reaction.)
When a sodium-22 nucleus undergoes electron capture, it captures an electron from one of its inner shells. This results in the formation of a new nucleus with one less proton in its nucleus.
Since the atomic number of an element is defined by the number of protons in its nucleus, the atomic number of the product will be one less than the atomic number of sodium-22, which is 11. Therefore, the product of this reaction will have an atomic number of 10. This new nucleus will also have the same mass number as sodium-22, which is 22, as the number of neutrons in the nucleus remains the same.
To know more about nucleus visit:
https://brainly.com/question/23366064
#SPJ11
Which of the following is more soluble in water, ethanol (C2H5OH) or CHBr3. Don't try to type the subscripts, just use letters and numbers. In depth explanation along with answer so that I can learn please.
Ethanol (C2H5OH) is more soluble in water compared to CHBr3. The solubility of a substance in water depends on its polarity and ability to form hydrogen bonds with water molecules.
Ethanol (C2H5OH) is more soluble in water compared to CHBr3. The solubility of a substance in water depends on its polarity and ability to form hydrogen bonds with water molecules.
Ethanol is a polar molecule, which means it has regions with different charges due to the unequal sharing of electrons. The hydroxyl group (OH) in ethanol can form hydrogen bonds with water molecules, leading to a strong interaction and high solubility in water.
On the other hand, CHBr3 is a non-polar molecule. The carbon-halogen bonds in CHBr3 distribute the charges evenly, resulting in no regions of differing charges. As a result, CHBr3 cannot form hydrogen bonds with water molecules, and it is not very soluble in water.
In conclusion, ethanol (C2H5OH) is more soluble in water due to its polar nature and ability to form hydrogen bonds with water molecules, while CHBr3 is less soluble due to its non-polar nature and inability to form hydrogen bonds.
To know more about Ethanol visit: https://brainly.com/question/18597444
#SPJ11
2C8H18(g)+25O2(g)→16CO2(g)+18H2O(g)
- 0.130 mol of octane is allowed to react with 0.690 mol of oxygen. Which is the limiting reactant?
- How many moles of water are produced in this reaction?
Express your answer with the appropriate units.
- After the reaction, how much octane is left?
Express your answer with the appropriate units.
The limiting reactant in the reaction is oxygen (O2).
The moles of water produced in the reaction is 0.585 mol.
After the reaction, there is no octane left, so the amount of octane left is 0 mol.
The limiting reactant in the given reaction is oxygen (O2).
To determine the limiting reactant, we compare the mole ratio of the reactants to the given amounts. From the balanced equation, we can see that the mole ratio of octane (C8H18) to oxygen (O2) is 2:25.
The moles of octane given is 0.130 mol, and the moles of oxygen given is 0.690 mol.
To calculate the limiting reactant, we divide the moles of each reactant by their respective coefficients in the balanced equation:
Moles of octane = 0.130 mol / 2 = 0.065 mol
Moles of oxygen = 0.690 mol / 25 = 0.0276 mol
Comparing the calculated moles, we find that the moles of oxygen (0.0276 mol) is less than the moles of octane (0.065 mol), indicating that oxygen is the limiting reactant.
The number of moles of water produced in this reaction can be determined using the stoichiometry of the balanced equation.
From the balanced equation, we can see that the mole ratio of water (H2O) to octane (C8H18) is 18:2.
Since oxygen is the limiting reactant, it will completely react with octane to form the products. Therefore, we use the mole ratio between water and octane to calculate the moles of water produced.
Moles of water = 0.065 mol octane * (18 mol H2O / 2 mol octane) = 0.585 mol water.
After the reaction, no octane is left since it is completely consumed in the reaction. Therefore, the amount of octane left is 0 mol.
learn more about limiting reactant Refer: https://brainly.com/question/10255265
#SPJ11
An important difference between fuel cells and batteries is that batteries,
Select the correct answer below:
require a continuous source of fuel
are constantly resupplied with reactants
are able to expel products
accumulate reaction byproducts
The correct answer is that batteries accumulate reaction byproducts.
Batteries rely on a chemical reaction to generate electricity, and as a result, the reactants are consumed over time, leaving behind byproducts that can accumulate and diminish the battery's performance. On the other hand, fuel cells require a continuous source of fuel and oxygen to generate electricity, and as long as fuel and oxygen are supplied, the reaction can continue without accumulating byproducts. This makes fuel cells potentially more efficient and sustainable than batteries, as they do not require replacement or disposal of the byproducts that accumulate in batteries.
However, fuel cells are not yet as widely used or readily available as batteries, and their cost and infrastructure requirements can be significant barriers to their adoption.
To know more about batteries visit:
https://brainly.com/question/32201761
#SPJ11
Predict whether the entropy change of the system in each of the following is positive or negative.
1.)O2(g)→2O(g)
2.)6CO2(g) + 6H2O(g)→C6H12O6(g) + 6O2(g)
The entropy change of a system can be positive or negative depending on the degree of disorder of the system. When a system undergoes a chemical reaction, the entropy of the system either increases or decreases.
In the first reaction, O2(g) → 2O(g), the number of gas molecules decreases from one to two, which means that there is a decrease in the entropy of the system. Therefore, the entropy change of the system is negative. On the other hand, in the second reaction, 6CO2(g) + 6H2O(g) → C6H12O6(g) + 6O2(g), the number of gas molecules increases from twelve to thirteen, which means that there is an increase in the entropy of the system. Therefore, the entropy change of the system is positive. In summary, the entropy change of a system depends on the change in the number of particles and the degree of disorder in the system.
To know more about Entropy visit:
https://brainly.com/question/32070225
#SPJ11
what was the maximum temperature displayed on the thermometer after the addition of the naoh solution to the hcl solution in the flask?
To determine the maximum temperature, carefully record the initial temperature and monitor the thermometer during the reaction until the temperature peaks and begins to decrease.
The maximum temperature displayed on the thermometer after the addition of the NaOH solution to the HCl solution in the flask cannot be determined without specific data from the experiment. The temperature change depends on factors like the concentration and volume of the solutions, as well as the initial temperature. However, when an acid (HCl) reacts with a base (NaOH), an exothermic neutralization reaction occurs, producing heat and causing the temperature to increase. To determine the maximum temperature, carefully record the initial temperature and monitor the thermometer during the reaction until the temperature peaks and begins to decrease. The temperature change depends on factors like the concentration and volume of the solutions, as well as the initial temperature.
To know more about thermometer visit:
https://brainly.com/question/28726426
#SPJ11
how many joules is transferred and what is the mass of the water the question is seen in the photo below
The granite block transferred 2052.88 joules of energy and the mass of the water is 19.84 grams.
Apply the idea of energy conservation to calculate the amount of energy that was transferred from the granite block to the water. The energy obtained by the water will be equivalent to the energy lost by the granite block.
Firstly, determine the energy lost by the granite block:
[tex]\rm \Delta Q_{granite} = mass_{granite} \times specific\ heat_{granite} \times \Delta T_{granite}[/tex]
In which:
[tex]mass_{granite}[/tex] = 126.1 grams (mass of the granite block)
[tex]\rm specific\ heat_{granite}[/tex] = 0.795 joules/gram degree Celsius (specific heat capacity of granite)
[tex]\rm T_{granite}[/tex] = final temperature - initial temperature
Given:
initial temperature = 92.6°C
final temperature = 51.9°C
ΔT = 51.9°C - 92.6°C = -40.7°C
ΔQ = 126.1 g × 0.795 J/g°C × (-40.7°C)
ΔQ = -2052.88 J
The negative sign represent that the granite block loses energy.
Due to the conservation of energy, the energy received by the water will be equal to that lost by the granite block in magnitude but will be of the opposite sign:
[tex]\rm \Delta Q_{water}[/tex]= - [tex]\rm \-\Delta Q_{granite}[/tex]
[tex]\rm \Delta Q_{water}[/tex] = 2052.88 J
Thus, the granite block transferred 2052.88 joules of energy.
To determine the mass of the water, use the following equation:
[tex]\rm \Delta Q_{water}[/tex] = mass of water × specific heat of water × ΔT of water
In which:
mass of water = to find
specific heat of water = 4.186 joules/gram degree Celsius (specific heat capacity of water)
ΔT of water = final temperature of water - initial temperature ofwater
initial temperature = 24.7°C
final temperature = 51.9°C
ΔT of water = 51.9°C - 24.7°C = 27.2°C
Substitute the values:
2052.88 J = mass of water × 4.186 J/g°C × 27.2°C
To solve for mass of water:
mass of water = 2052.88 J / (4.186 J/g°C × 27.2°C)
mass of water = 19.84 grams
Thus, the mass of the water is 19.84 grams.
Learn more about energy, here:
https://brainly.com/question/30007427
#SPJ1
Determine ΔG°rxn for the following reaction at 358 K.
CaCO3(s) → CaO(s) + CO2(g) ΔH°= +179.2 kJ; ∆S°= +160.2 J/K
a. +236.6 kJ
b. +121.8 kJ
c. +179.2 kJ
d. -121.8 kJ
e. -236.6 kJ
The value of ΔG°rxn for the given reaction is (b) +121.8 kJ.
The value of ΔG°rxn for the given reaction can be determined using the equation ΔG°rxn = ΔH° - TΔS°, where ΔH° is the standard enthalpy change and ΔS° is the standard entropy change.
Given that ΔH° = +179.2 kJ and ΔS° = +160.2 J/K, we need to ensure that the units are consistent. Converting ΔS° to kJ/K, we have ΔS° = +0.1602 kJ/K.
Substituting these values into the equation, we have:
ΔG°rxn = +179.2 kJ - (358 K * 0.1602 kJ/K)
ΔG°rxn = +179.2 kJ - 57.3396 kJ
ΔG°rxn = +121.8604 kJ
Therefore, the value of ΔG°rxn for the given reaction at 358 K is approximately +121.9 kJ.
Among the provided answer choices, the closest value to +121.9 kJ is (b) +121.8 kJ.
Hence, the correct answer is (b) +121.8 kJ.
learn more about standard enthalpy Refer: https://brainly.com/question/28303513
#SPJ11
Which of the following changes will increase the average kinetic energy of reactant molecules? A. adding a catalyst B. increasing the temperature C. increasing the surface area of the reactant
D. increasing the concentration of the reactant
E. None of the choices
The correct answer to this question is B, increasing the temperature. The average kinetic energy of reactant molecules is directly related to the temperature of the system.
As the temperature increases, the molecules in the reactant have more kinetic energy and move faster, leading to more collisions and a higher likelihood of successful collisions that result in a reaction. Adding a catalyst, increasing the surface area of the reactant, and increasing the concentration of the reactant do not necessarily lead to an increase in the average kinetic energy of the reactant molecules. A catalyst may speed up the reaction by lowering the activation energy required for the reaction to occur, but it does not directly affect the kinetic energy of the reactant molecules. Increasing the surface area and concentration of the reactant may lead to more collisions and a higher likelihood of successful collisions, but it does not necessarily lead to an increase in the kinetic energy of the molecules.
In summary, increasing the temperature is the only choice that will directly increase the average kinetic energy of the reactant molecules.
learn more about reactant molecules Refer: https://brainly.com/question/146307
#SPJ11
perform the following calculations and report the answers to the correct number of significant figures. show work. 10.56 -17.8 x 0.04 + 10.01
To determine the number of significant figures in the final answer, we look at the least precise value, which is 10.01 with four significant figures. Therefore, the final answer, 19.858, should be rounded to four significant figures, resulting in 19.86.
To perform the calculations with the correct number of significant figures, we follow these steps:
Step 1: Multiply -17.8 by 0.04:
-17.8 x 0.04 = -0.712
Step 2: Add 10.56 and the result from Step 1:
10.56 + (-0.712) = 9.848
Step 3: Add 9.848 and 10.01:
9.848 + 10.01 = 19.858
To know more about significant figures
https://brainly.com/question/29530365
#SPJ11
Predict the rate law for the reaction
2BrO(g) --> Br2(g) + O2(g)
If the following conditions hold true: (Use k to represent the rate constant and [A] to represent the concentration of A.)
A) The rate triples when [BrO] triples. Rate law =??
B) When [BrO] is halved, the rate decreases by a factor of 4. Rate law =??
C) The rate is unchanged when [BrO] is tripled. Rate law = ??
rate = k [BrO] (when the rate triples when [BrO] triples)
rate = k [BrO]^2 (when the rate decreases by a factor of 4 when [BrO] is halved)
rate = k (when the rate is unchanged when [BrO] is tripled)
In order to predict the rate law for the given reaction, we need to determine the relationship between the rate of the reaction and the concentration of the reactants. The rate law is generally represented as:
rate = k [A]^x [B]^y
where k is the rate constant, x and y are the orders of the reaction with respect to reactants A and B, respectively.
A) The rate triples when [BrO] triples. This indicates that the reaction is first order with respect to BrO. Thus, the rate law can be written as:
rate = k [BrO]
B) When [BrO] is halved, the rate decreases by a factor of 4. This indicates that the reaction is second order with respect to BrO. Thus, the rate law can be written as:
rate = k [BrO]^2
C) The rate is unchanged when [BrO] is tripled. This indicates that the reaction is zero order with respect to BrO. Thus, the rate law can be written as:
rate = k
learn more about reactants Refer: https://brainly.com/question/14225536
#SPJ11
Think about the concept of intermolecular forces and that the stronger the intermolecular force, the more energy needed to separate the molecules.
For the various properties below, identify the category that they belong in, whether it be 'Strong intermolecular forces' or 'Weak intermolecular forces':
A) High vapor pressure
B) High boiling point
C) High viscosity
d) High surface tension
The concept of intermolecular forces is related to the attractive or repulsive forces between molecules that determine their physical properties.
The concept of intermolecular forces is related to the attractive or repulsive forces between molecules that determine their physical properties. There are different types of intermolecular forces, such as London dispersion forces, dipole-dipole interactions, and hydrogen bonds, which vary in strength and depend on the molecular structure and polarity. Generally, stronger intermolecular forces require more energy to overcome and separate the molecules, whereas weaker intermolecular forces require less energy.
A) High vapor pressure: This property belongs to weak intermolecular forces because it means that the molecules can easily escape from the liquid phase and become a gas. This happens when the intermolecular forces are not strong enough to hold the molecules together, and they can break apart and move freely.
B) High boiling point: This property belongs to strong intermolecular forces because it means that the molecules require a lot of energy to break the intermolecular bonds and transition from a liquid phase to a gas phase. This happens when the intermolecular forces are strong enough to keep the molecules together and resist the thermal energy that tries to separate them.
C) High viscosity: This property belongs to strong intermolecular forces because it means that the molecules are highly attracted to each other and resist flowing easily. This happens when the intermolecular forces are strong enough to create a high degree of cohesion and adhesion between the molecules, which impedes their movement and causes them to stick together.
d) High surface tension: This property belongs to strong intermolecular forces because it means that the molecules at the surface of a liquid are highly attracted to each other and create a tension that resists deformation. This happens when the intermolecular forces are strong enough to create a cohesive force between the molecules at the surface, which makes them behave as if they were under an elastic film.
To know more about intermolecular forces visit: https://brainly.com/question/31797315
#SPJ11
Dr. Wong's assistant made the observations below while heating a sample of solid hydrogen. Using the data and observations in the table below, create a heating curve for hydrogen that Dr. Wong can reference during his laboratory testing. Be sure to include and label the following items in your heating curve:
Create temperature and time intervals that are appropriate for the data.
Don't start the temperature on the graph at 0 °C because the time intervals will be too large for the hydrogen data.
Label the melting and boiling points on the curve.
Label the three states and the two transition phases on the curve.
Include the observed temperatures as well as state transitions (solid, liquid, and gas) while drawing a heating curve.
An example of a graph that demonstrates how substances change when subjected to constant heat is a heating curve. This frequently involves modifications to the state as well as changes to the temperature.
Additionally, the boiling point (the temperature at which a material transforms from a liquid to a gas). The melting point (the temperature at which a substance transforms from a solid to a liquid) are to blame if a change in state happened.
The heating curve is attached in the image below.
Learn more about heating curve, here:
https://brainly.com/question/10481356
#SPJ1
The given question is incomplete, so the most probable complete question is,
Dr. Wong's assistant made the observations below while heating a sample of solid hydrogen. Using the data and observations in the table below, create a heating curve for hydrogen that Dr. Wong can reference during his laboratory testing. Be sure to include and label the following items in your heating curve:
Create temperature and time intervals that are appropriate for the data.
Don't start the temperature on the graph at 0 °C because the time intervals will be too large for the hydrogen data.
Label the melting and boiling points on the curve.
Label the three states and the two transition phases on the curve.
Time (Minutes)Observations
0:00 Hydrogen is a solid at −263 °C. Heat is added to the sample.
2:43 Hydrogen begins to change into a liquid at −259 °C.
6:15 Temperature of the liquid begins to increase.
10:36 Hydrogen begins to form a gas at −253 °C.
14:01 Temperature of the gas begins to increase.
18:00 Final temperature of hydrogen gas is −245 °C.
How many kilograms of H2O must be added to 75. 5 g of Ca(NO3)2 to form 0. 500 m solution?
To form a 0.500 m (molality) solution, approximately 0.9194 kilograms of H[tex]_{2}[/tex]O should be added to 75.5 grams of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex].
To determine the number of kilograms of H[tex]_{2}[/tex]O that must be added to 75.5 g of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex] to form a 0.500 m (molality) solution, we need to use the formula for molality:
molality (m) = moles of solute / mass of solvent (in kg)
First, let's calculate the moles of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex]:
Molar mass of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex] = (1 × molar mass of Ca) + (2 × molar mass of NO[tex]_{3}[/tex])
= (1 × 40.08 g/mol) + (2 × (14.01 g/mol + 3 × 16.00 g/mol))
= 40.08 g/mol + 2 × 62.03 g/mol
= 164.14 g/mol
moles of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex] = mass / molar mass
= 75.5 g / 164.14 g/mol
≈ 0.4597 mol
Next, let's calculate the mass of solvent (H[tex]_{2}[/tex]O) required:
molality (m) = 0.500 m = moles of solute / mass of solvent (in kg)
0.500 = 0.4597 mol / mass of solvent (in kg)
mass of solvent (in kg) = 0.4597 mol / 0.500 m
= 0.9194 kg
Therefore, approximately 0.9194 kilograms of H[tex]_{2}[/tex]O must be added to 75.5 grams of Ca(NO[tex]_{3}[/tex])[tex]_{2}[/tex] to form a 0.500 m solution.
You can learn more about molality at
brainly.com/question/4425414
#SPJ11
practice: in the spaces below, write the electron configurations for the next four elements: nitrogen, oxygen, fluorine, and neon. when you are finished, use the gizmo to check your work. correct any improper configurations.questionanswerpossibleearneda.nitrogen1b.oxygen1c.fluorine1d.neon1
The electron configurations for the next four elements, nitrogen (N), oxygen (O), fluorine (F), and neon (Ne), are as follows:
a. Nitrogen (N): 1s² 2s² 2p³
Nitrogen has an atomic number of 7. The electron configuration starts with the 1s orbital, which can hold up to 2 electrons. Then, it fills the 2s orbital, which can also hold up to 2 electrons. Finally, it fills three of the five available orbitals in the 2p sublevel, which can hold a total of 6 electrons.
b. Oxygen (O): 1s² 2s² 2p⁴
Oxygen has an atomic number of 8. Following the same pattern as before, the electron configuration fills the 1s and 2s orbitals with 2 electrons each. It then fills all four available orbitals in the 2p sublevel with 4 electrons.
c. Fluorine (F): 1s² 2s² 2p⁵
Fluorine has an atomic number of 9. It follows the same pattern as nitrogen and oxygen, filling the 1s and 2s orbitals with 2 electrons each. It then fills five of the available orbitals in the 2p sublevel with 5 electrons.
d. Neon (Ne): 1s² 2s² 2p⁶
Neon has an atomic number of 10. The electron configuration fills the 1s and 2s orbitals with 2 electrons each. It then fills all six available orbitals in the 2p sublevel with 6 electrons.
Please note that these electron configurations represent the ground state configurations for the elements mentioned.
To know more about neon visit:
https://brainly.com/question/31187112
#SPJ11
Classify each reaction according to whether a precipitate forms Pricipitate forms Precipitate does not form Answer Bank NaNO, + NaOH AgNO, +NaBr
To determine whether a precipitate form or not, we need to check if there is a possible formation of an insoluble compound when the two reactants mix together. Here's the classification for each reaction:
Reaction 1: NaNO3 + NaOH
This reaction involves sodium nitrate (NaNO3) and sodium hydroxide (NaOH).
When we mix sodium nitrate (NaNO3) and sodium hydroxide (NaOH), they will undergo a double displacement reaction.
NaNO3(aq) + NaOH(aq) → NaOH(aq) + NaNO3(aq)
In this reaction, no precipitate forms because both sodium nitrate (NaNO3) and sodium hydroxide (NaOH) are highly soluble in water and dissociate completely.
Reaction 2: AgNO3 + NaBr
This reaction involves silver nitrate (AgNO3) and sodium bromide (NaBr).
When we mix silver nitrate (AgNO3) and sodium bromide (NaBr), they will undergo a double displacement reaction.
AgNO3(aq) + NaBr(aq) → AgBr(s) + NaNO3(aq)
In this reaction, a precipitate forms because silver bromide (AgBr) is insoluble in water and will precipitate out. Sodium nitrate (NaNO3) remains in the solution because it is highly soluble.
Learn more about double displacement reaction here ;
https://brainly.com/question/29740109
#SPJ11