What is the value of acceleration in the following conditions
when a body comes at its initial position after motion

The tension force on object 2 must be one-fourth the tension force on object 1. The correct option is D.

The cross-sectional area is directly proportional to the square of the diameter, or A = πd²/4.

The Young's modulus is a constant for a given material.

Therefore, the change in length is proportional to the tension force and the square of the diameter.

For the two objects to have the same change in length, they must also have the same tension force.

The tension force is inversely proportional to the cross-sectional area, or F = EA/L0.

Therefore, the tension force is inversely proportional to the square of the diameter.

If object 2 has twice the diameter of object 1, then it will have four times the cross-sectional area.

Therefore, the tension force on object 2 must be one-fourth the tension force on object 1.

In other words, T2/T1 = 1/4.

Learn more about tension on

https://brainly.com/question/24994188

#SPJ1

Objects 1 and 2 attract each other with an electrostatic force of 36.0 units. If the distance separating Objects 1 and 2 is tripled, then the new electrostatic force will be four units.

Coulomb's law can be expressed as:

F = k × (q1 × q2) / r²

In which:

F = electrostatic force

k = electrostatic constant (k = 9 × 10⁹ N·m²/C²)

q1 and q2 = the charges of the objects

r =  distance between the objects

Let's consider that the initial electrostatic force in between objects 1 and 2 is 36.0 units.

F1 = 36.0 units

Next, if the distance is considered between the objects is tripled, the new distance (r') changes into three times the initial distance (r):

r' = 3 ×  r

To determine the new electrostatic force (F'), replacement r' into Coulomb's law:

F' = k  × (q1  × q2) / (r')²

Place r' = 3r:

F' = k × (q1 × q2) / (3r)²

= k × (q1 × q2) / 9r²

The new force will be one-ninth (1/9) of the initial force since the electrostatic force (F') is directly proportional to (q1 q2) and inversely proportional to r2.

F' = (1/9) ×  F1

= (1/9) × 36.0

= 4.0 units

Thus, objects 1 and 2 attract each other with an electrostatic force of 36.0 units. If the distance separating Objects 1 and 2 is tripled, then the new electrostatic force will be 4 units.

Learn more about electrostatic force, here:

https://brainly.com/question/31042490

#SPJ1

Yes, the sum of magnitude of two vectors can be equal to the magnitude of sum of these two vectors.

The sum of two vectors is determined by applying triangle law of vector addition or parallelogram law of vector addition.

The sum of magnitude of two vectors can be equal to the magnitude of sum of these two vectors when two vectors are colinear.

For example, let vector A = ax  and vector B =  dy

The sum of the two vectors is given as;

v = √ (a² + d²)

Learn more about sum of vectors here: https://brainly.com/question/2927458

#SPJ1

Without knowing the forces exerted by Kari and Sandra, as well as the specific details about the stairs, we cannot determine who did more work. Option D

The amount of work done depends not only on the distance traveled but also on the force applied and the direction of the force. Without information about the force applied by both Kari and Sandra, we cannot determine who did more work.

Work is defined as the product of force and displacement in the direction of the force. In this case, the force exerted by Kari and Sandra while climbing the stairs is unknown.

If Kari and Sandra exerted the same amount of force while moving up the stairs, then the work done would be the same. However, if Sandra exerted a greater force compared to Kari, then Sandra would have done more work.

Additionally, the presence of stairs implies a vertical displacement. If Kari and Sandra were climbing stairs at the same height, the work done would be the same. However, if the stairs had different heights or slopes, the vertical displacement would differ, and that could affect the work done. Option D

For more such questions on work visit:

https://brainly.com/question/8119756

#SPJ8

If the net work done on a particle is zero, the particle will move with a constant speed.

The principle of work and kinetic energy, often known as the work-energy theorem, states that the change in kinetic energy of a particle is equal to the sum of the entire work done by all of the forces acting on it.

So,

W = ΔKE

Thus, we can say that the kinetic energy of the particle will not change if the net work done on it is equal to zero.

As a result, the state of motion of the particle will not change, and thus the speed of the particle will also remain constant.

To learn more about work done, click:

https://brainly.com/question/30641311

#SPJ1

The maximum speed that the small-mass object attains when it leaves the trebuchet horizontally is approximately 28.3 m/s.

To find the maximum speed that the small-mass object attains when it leaves the trebuchet horizontally, we can apply the principle of conservation of mechanical energy.

Initially, the trebuchet is at rest, so its total mechanical energy is zero. As the small-mass object leaves the trebuchet horizontally, it gains kinetic energy. At this point, all of the potential energy of the system is converted into kinetic energy.

The potential energy of the system can be calculated as the sum of the gravitational potential energies of the two masses:

PE = m1 * g * h1 + m2 * g * h2

Since the trebuchet is released from rest in a horizontal orientation, the initial height h1 is zero. The height h2 can be calculated as the perpendicular distance between the pivot point and the center of mass of the larger mass m2:

h2 = 13.0 cm = 0.13 m

Therefore, the potential energy simplifies to:

PE = m2 * g * h2

The kinetic energy of the small-mass object can be calculated as:

KE = (1/2) * m1 * v^2

where v is the maximum speed of the small-mass object.

Since the total mechanical energy is conserved, we have:

PE = KE

m2 * g * h2 = (1/2) * m1 * v^2

Plugging in the given values, such as g = 9.8 m/s^2, m1 = 0.115 kg, m2 = 68.5 kg, and h2 = 0.13 m, we can solve for v:

(68.5 kg * 9.8 m/s^2 * 0.13 m) = (1/2) * 0.115 kg * v^2

Solving for v, we find:

[tex]v^2 = (68.5 kg * 9.8 m/s^2 * 0.13 m) / (0.115 kg)[/tex]

[tex]v^2 = 800[/tex]

v ≈ 28.3 m/s

For more such questions on maximum speed visit:

https://brainly.com/question/29573654

#SPJ8

The x component of the vector is determined as 8.03 m.

The x component of the vector is calculated by applying the following formula as shown below;

Vx = V cosθ

where;

The  x component of the vector is calculated as follows;

Vx = 12.1 m x cos (48.4⁰)

Vx = 8.03 m

Thus, the x component of the vector is determined as 8.03 m.

Learn more about x-component here: https://brainly.com/question/28002904

#SPJ1

The more mass the object has, the more force it takes to move it. This relation is obtained from Newton's first law.

Newton gives three laws for the motion of the object. Newton's first law states that the body remains at rest or in uniform motion until an external unbalanced force is applied to it. Newton's first law is also called as law of inertia.

Newton's second law states that the external unbalanced force is directly proportional to the acceleration of the object. F=m×a, where F is the force of the object, m is the mass of the object and a is the acceleration of the object.

Newton's third law states that, for every action, there are equal and opposite reactions. From the law of inertia, if the object has more mass, then the object takes more force to move.

Hence, if more mass, the more force it takes to move.

To learn more about Newton's law of motion:

https://brainly.com/question/32165039

#SPJ1

Answer:

1.4

Explanation:

We are given,

f=.1 Hz

and

λ= 14

Using the equation for wave speed, we can calculate

v=fλ

=.1 Hz × 14 cm

= 1.4m/s

Hence, the speed of the sound waves in the given medium is 1.4 m/s.

Since focal length cannot be negative for a converging lens, we take the positive value: f ≈ 41 cm Option C

To determine the focal length of the lens, we can use the lens formula, which relates the object distance (u), image distance (v), and focal length (f) of a lens. The lens formula is given by:

1/f = 1/v - 1/u

In this case, the object distance (u) is 25 cm and the image distance (v) is 64 cm. We can substitute these values into the lens formula to solve for the focal length:

1/f = 1/v - 1/u

1/f = 1/64 cm - 1/25 cm

To simplify the equation, we can find a common denominator:

1/f = (25 - 64) / (64 * 25)

1/f = -39 / (64 * 25)

Now, we can invert both sides of the equation to solve for the focal length:

f = (64 * 25) / -39

f ≈ -41.03 cm

Since focal length cannot be negative for a converging lens, we take the positive value:

f ≈ 41 cm

Therefore, the correct answer is option C) 41 cm.

It's important to note that in the lens formula, distances are measured with respect to the lens, with positive values indicating distances on the opposite side of the incident light. The negative value obtained for the focal length indicates that the lens is a converging lens, as expected. Option C

For more such questions on focal length visit:

https://brainly.com/question/9615224

#SPJ8

The pressure of the tank, when filled with water at a depth of 6 m, is approximately 580.124 atmospheres (atm). To calculate the pressure of the tank, one can use the equation: Pressure (P) = Density (ρ) × g × Depth (h)

Pressure (P) = Density (ρ) × g × Depth (h)

Given: Density of water (ρ) = 1000 kg/m³

Acceleration due to gravity (g) = 9.8 m/s²

Depth (h) = 6 m

Using the given values, one can calculate the pressure:

Pressure = 1000 kg/m³ × 9.8 m/s² × 6 m Pressure

= 58800 kg·m⁻¹·s⁻²

Now, let's convert the units to pascals (Pa) using the conversion 1 atm = 1.013 x [tex]10^5[/tex] Pa:

Pressure = 58800 kg·m⁻¹·s⁻² × (1 atm / 1.013 x[tex]10^5[/tex] Pa)

Pressure = 580.124 atm

Learn more about pressure calculation here.

https://brainly.com/question/32496499

#SPJ1

Dimensions are measured using a Vernier Caliper  (option A)

A device renowned for its accuracy in measuring the size of objects, the Vernier caliper functions with two jaws to hold an object steady as its scale offers readings. It can assess both external and internal measurements as well as depth with precision.

The Vernier caliper is made up of two main parts: the main scale and the vernier scale. The main scale is a graduated scale that is used to read the measurement in millimeters. The vernier scale is a smaller scale that is used to read the measurement in fractions of a millimeter.

Learn about Vernier Caliper here https://brainly.com/question/28224392

#SPJ1

Answer:

that is the answer

Explanation:

brainlist

In social psychology, a stereotype is a generalized belief about a particular category of people.

A stereotype can be described as the accepted, condensed, and essentialist opinion  with regards to certain population.

I should be nted hat his can be related to  gender identity, race  as well as ethnicity, country,  however there are other things that an be used frequently used to stereotype groups. Stereotypes are pervasively present in both the larger social structure and culture.

Learn more about stereotype at;

https://brainly.com/question/361502

#SPJ1

In Ørsted's observation, the current-carrying wire acted like a magnet. This observation, made by Da nish physicist Hans Christian Ørsted in 1820, demonstrated the relationship between electricity and magnetism.

Ørsted noticed that when an electric current passed through a wire, a nearby compass needle deflected, indicating the presence of a magnetic field around the wire.

This discovery laid the foundation for the study of electromagnetism and played a significant role in the development of electric motors and generators. In Ørsted's observation, the current-carrying wire acted like a magnet or produced a magnetic field.

Learn more about electromagnetism on:

https://brainly.com/question/31039466

#SPJ1

The future consequence of using windmills for wind energy that is most closely related to the given options is: A) It can harm birds and species nearby. Option A

One of the potential consequences of using windmills for wind energy is the risk of harm to birds and other species. Wind turbines can pose a threat to birds, especially large raptors and migratory birds, as they can collide with the spinning turbine blades.

The fast-moving blades can cause injury or death to birds that come into contact with them. Additionally, the construction and operation of wind farms can disrupt wildlife habitats and migration patterns, impacting local ecosystems.

While weather can certainly affect the quality and consistency of wind energy generation (option B), it is not specifically a consequence of using windmills. Weather patterns and variations in wind speed and direction can influence the efficiency and reliability of wind turbines, but this is an inherent characteristic of wind energy rather than a consequence.

Option C states that wind energy produces less noise than other energy sources. This is a positive attribute of wind energy, as wind turbines generally generate less noise compared to other forms of power generation, such as fossil fuel power plants. However, it is not a future consequence but rather a benefit of wind energy.

Option D refers to wind cells being used in isolated locations. This statement is not related to the consequences of using windmills for wind energy but rather describes the potential use of wind cells (small-scale wind energy systems) in remote or isolated areas.

In summary, the most appropriate answer is A) It can harm birds and species nearby, as the impact on wildlife is a significant consideration in the development and operation of wind energy projects.

Option A.

For more such questions on windmills visit;

https://brainly.com/question/15321264

#SPJ8

Answer:

To round 52754.1683 to the nearest:

Thousand: 53000

Hundredth: 52754.17

Hundred: 52700

Tenth: 52754.2

Whole number: 52754

Explanation:

Energy conservation refers to the principle that energy cannot be created or destroyed; it can only be converted from one form to another or transferred between different systems.

This principle is based on the law of conservation of energy, also known as the first law of thermodynamics. In order to comment on energy conservation in a diagram.

Energy conservation refers to the practice of reducing energy consumption and using energy resources efficiently in order to minimize waste and environmental impact. It involves making conscious choices and adopting behaviors and technologies that aim to conserve energy and reduce energy-related costs.

Energy conservation is an important aspect of sustainable development and plays a vital role in mitigating climate change and promoting environmental sustainability.

Learn more about Energy conservation on:

https://brainly.com/question/13949051

#SPJ1

The angles between X, Y, and Z are θx = θy = 63.6, θz = 27.2 with the resultant vector R = i + 2j + 4k.

From the given,

the resultant vector, R = i+2j+4k

Rx = 1

Ry = 2

Rz = 4

R² = Rx² + Ry² + Rz²

   = (1)² + (2)² + (4)²

  = 1+4+16

= 21

R = √21

 = 4.5

Thus, the resultant vector, R is 4.5.

The angles between x, y, and z.

cosθx = Rx/R = 1/4.5

θx = cos⁻¹ (0.22) = 77.1° in X- axis.

cosθy = Ry/R = 2/4.5

θy = cos⁻¹(0.44) = 63.6° in Y-axis.

cosθz = Rz/R = 4/4.5

θz = cos⁻¹(0.88) = 27.2 in Z-axis.

The angles are θx = 77.1°, θy =63.6°, and θz = 27.2° along X, Y, and Z axis.

To learn more about the angle between the resultant vector:

https://brainly.com/question/13954873

#SPJ1

a) The moment of inertia of the pulley can be determined by dividing the net torque by the angular acceleration: 0.4 kgm²

b) Using the given values of the mass (M = 4.58 kg) and radius (R = 30.2 cm = 0.302 m), we can calculate the rough estimate of the moment of inertia.

(a) To determine the moment of inertia of the pulley, we can use the principles of rotational dynamics. The net torque acting on the pulley is given by the difference between the applied torque and the frictional torque.

The applied torque can be calculated using the force applied to the cord and the radius of the pulley. The torque is given by the equation:

τ_applied = F * R

Substituting the given values, F = 24.4 N and R = 30.2 cm = 0.302 m, we can find τ_applied.

The frictional torque is given as τ_friction = -τ = -1.48 mN.

The net torque acting on the pulley is the sum of the applied and frictional torques:

τ_net = τ_applied + τ_friction

The angular acceleration α can be calculated using the relationship between angular acceleration, final angular velocity, initial angular velocity, and time:

α = (ω_final - ω_initial) / t

Substituting the given values, ω_initial = 0 rad/s, ω_final = 26.8 rad/s, and t = 2.23 s, we can find α = 12.8

Using the formula for net torque and angular acceleration:

τ_net = I * α

we can solve for the moment of inertia I:

I = τ_net / α= 0.4

Substituting the calculated values of τ_net and α, we can determine the moment of inertia of the pulley.

(b) The rough estimate of the moment of inertia can be obtained by considering the pulley as a uniform disk. The moment of inertia of a uniform disk rotating about its center is given by the formula:

I_disk = (1/2) * M * R^2

where M is the mass of the pulley and R is the radius.

Using the given values of the mass (M = 4.58 kg) and radius (R = 30.2 cm = 0.302 m), we can calculate the rough estimate of the moment of inertia.

The difference between (a) and (b) is the deviation caused by considering the actual situation with friction (taking into account the frictional torque at the axle) compared to the simplified assumption of a uniform disk without friction.

The inclusion of friction affects the net torque acting on the pulley, resulting in a different moment of inertia value compared to the rough estimate. The difference between the two values indicates the impact of friction on the rotational motion of the pulley.

For more such questions on moment of inertia visit:

https://brainly.com/question/14460640

#SPJ8

To determine the image characteristics using the 3 principal rays and SALTS (Size, Attitude, Location, Type), we'll consider both lenses and mirrors separately. Here's how you can analyze each case:

Lenses:

Place an object at different distances to the left of a lens with a focal length (f).

a) Object placed beyond 2f:

In this case, the object is placed far beyond twice the focal length of the lens.

Principal ray 1: A ray parallel to the principal axis will pass through the focal point on the opposite side.

Principal ray 2: A ray passing through the optical center will continue in a straight line without any deviation.

Principal ray 3: A ray passing through the focal point on the object side will emerge parallel to the principal axis.

The image will be formed on the opposite side of the lens, between the focal point and twice the focal length.

SALTS:

Size: The image will be smaller than the object.

Attitude: The image will be inverted.

Location: The image will be located between the focal point and twice the focal length.

Type: The image will be real.

b) Object placed at 2f:

In this case, the object is placed at twice the focal length of the lens.

Principal ray 1: A ray parallel to the principal axis will pass through the focal point on the opposite side.

Principal ray 2: A ray passing through the optical center will continue in a straight line without any deviation.

Principal ray 3: A ray passing through the focal point on the object side will emerge parallel to the principal axis.

The image will be formed on the opposite side of the lens at twice the focal length.

SALTS:

Size: The image will be the same size as the object.

Attitude: The image will be inverted.

Location: The image will be located at twice the focal length.

Type: The image will be real.

c) Object placed between f and 2f:

In this case, the object is placed between the focal point and twice the focal length of the lens.

In this case, the object is placed far beyond twice the focal length of the mirror.

Principal ray 1: A ray parallel to the principal axis will reflect through the focal point on the same side.

Principal ray 2: A ray passing through the focal point on the object side will reflect parallel to the principal axis.

Principal ray 3: A ray passing through the center of curvature will reflect back along the same path.

The image will be formed on the opposite side of the mirror, between the focal point and twice the focal length.

Learn more about focal length on:

https://brainly.com/question/31755962

#SPJ1

Based on the information, the net force acting on sphere B is 0 N.

Net force refers to the overall force acting on an object or system. It is determined by considering all the individual forces acting on the object and combining them according to their magnitudes and directions.

When multiple forces act on an object, they can either be in the same direction or in opposite directions. If the forces are in the same direction, the net force is equal to the sum of the individual forces.

The forces exerted by spheres X and Y on sphere B are equal in magnitude and opposite in direction. Therefore, they cancel each other out and the net force on sphere B is 0 N.

F(BX) = F(BY) = 6.0 × 10^-6 N

F(net) = F(BX) + F(BY) = 0 N

Learn more about force on

https://brainly.com/question/12970081

#SPJ1

The underlined statement refers to the work function of a metal, X, which is a measure of the minimum energy required to liberate an electron from the surface of the metal. In other words, if the energy of the incident light is equal to or greater than the work function, electrons can be ejected from the metal's surface.

(i) To calculate the cutoff wavelength, we can use the equation:

E = hc/λ

where E is the energy of a photon, h is the Planck's constant (6.6 x 10^(-34) J s), c is the speed of light (3.0 x 10^8 m/s), and λ is the wavelength of light.

Since we want to find the cutoff wavelength, we need to determine the energy of a photon that corresponds to the work function of the metal, X. We can use the equation:

E = work function = 2.0 eV = 2.0 x 1.6 x 10^(-19) J

Now we can rearrange the equation to solve for λ:

λ = hc/E

Substituting the values:

λ = (6.6 x 10^(-34) J s) * (3.0 x 10^8 m/s) / (2.0 x 1.6 x 10^(-19) J)

Calculating this expression will give us the cutoff wavelength.

(ii) (a) To calculate the maximum energy of the liberated electrons, we can use the equation:

E = hc/λ

Using the given wavelength of 4.5 x 10^(-7) m, we can substitute it into the equation to find the energy.

(B) To calculate the stopping potential, we can use the equation:

eV_stop = E - work function

where e is the elementary charge (1.6 x 10^(-19) C), V_stop is the stopping potential, E is the energy of a photon corresponding to the given wavelength, and the work function is given as 2.0 eV. Solving for V_stop will give us the stopping potential.

(Y) It seems that there is no specific information or question provided for (Y). Please provide additional context or information for me to assist you further with (Y).

Learn more about wavelength on:

https://brainly.com/question/31143857

#SPJ1

The value of the area A₁ of this cylinder of the hydraulic press is determined as 0.019 m².

The value of the area A₁ of this cylinder is calculated by applying Paschal principle as follows;

P = F/A

F₁/A₁ = F₂/A₂

where;

A₁/F₁ = A₂/F₂

A₁ = (F₁ / F₂ ) A₂

The value of the area A₁ of this cylinder is calculated as follows;

A₁ = (182 / 1140 x 9.8 ) 1.15

A₁ = 0.019 m²

Learn more about hydraulic press here: https://brainly.com/question/21634180

#SPJ1

The rider feels an acceleration of approximately 19.6 m/s^2 from the seat at the bottom of the loop. the speed at which riders feel no push from the seat when they are at the top of the loop is approximately 14 m/s.

To determine the speed at which riders feel no push from the seat when they are at the top of the loop, we need to consider the forces acting on the riders at that point. At the top of the loop, the riders are moving in a circular path, so there is a centripetal force acting toward the center of the loop, provided by the net force. In this case, the net force is the gravitational force.

The centripetal force required to keep an object moving in a circle is given by the equation:

F_c = m * a_c

Where:

F_c is the centripetal force

m is the mass of the object

a_c is the centripetal acceleration

In this scenario, the centripetal force is provided solely by the gravitational force, which is given by:

F_g = m * g

Where:

F_g is the gravitational force

g is the acceleration due to gravity (approximately 9.8 m/s^2)

Equating the centripetal force to the gravitational force, we have:

m * a_c = m * g

The mass cancels out, so:

a_c = g

The centripetal acceleration is equal to the acceleration due to gravity. Now, we can determine the speed at the top of the loop. The centripetal acceleration is given by:

a_c = v^2 / r

Where:

v is the speed

r is the radius of the loop

Substituting the value of a_c from above, we get:

g = v^2 / r

Rearranging the equation to solve for v, we have:

v = √(g * r)

Plugging in the values for g and r, we can calculate the speed:

v = √(9.8 m/s^2 * 20 m)

v ≈ √(196 m^2/s^2)

v ≈ 14 m/s

To find the speed of the car at the top of the loop, we can equate the centripetal acceleration with the acceleration due to gravity. At the top of the loop, the centripetal force is provided by the gravitational force, and this ensures that riders feel no push from the seat.

The centripetal acceleration can be calculated using the formula:

[tex]a_c = v^2 / r[/tex]

where a_c is the centripetal acceleration, v is the velocity, and r is the radius of the circular loop.

At the top of the loop, the centripetal acceleration is equal to the acceleration due to gravity (g):

[tex]a_c = g[/tex]

Equating the two, we have:

[tex]v^2 / r = g[/tex]

Solving for v, we get:

v = [tex]\sqrt{g * r}[/tex]

Given that the radius of the circular loop is 20 m and the acceleration due to gravity is approximately 9.8 m/s^2, we can calculate the speed of the car at the top of the loop.

v = [tex]\sqrt{9.8 m/s^2 * 20 m}[/tex]= 19.8 m/s

Therefore, the speed of the car at the top of the loop is approximately 19.8 m/s.

Now, let's calculate the acceleration that the rider feels from the seat at the bottom of the loop. At the bottom, the seat needs to provide both the acceleration due to gravity and the centripetal acceleration.

The net acceleration can be calculated by subtracting the acceleration due to gravity from the centripetal acceleration:

[tex]a_net = a_c - g[/tex]

Using the same values of the radius (20 m) and acceleration due to gravity (9.8 m/s^2), we can calculate the net acceleration:

[tex]a_net = (v^2 / r) - g[/tex]

Substituting the speed at the top of the loop (19.8 m/s) and the radius (20 m), we can find the net acceleration:

[tex]a_net = (19.8^2 / 20) - 9.8 = 19.6 m/s^2[/tex]

For more such questions on acceleration visit:

https://brainly.com/question/460763

#SPJ8

Therefore,  the student and the skateboard will move backward by 5m/s to counterbalance the forward momentum.

According to to law of conservation of momentum, the total momentum before the ball is thrown is equal to the final momentum after the ball is thrown.

Momentum is mass × velocity.

The initial momentum is

mass of student + mass of skate ball * velocity.

50kg * 0 = 0kh m/s

Final momentum

mass of student + mass of skate ball * velocity.

The velocity is 5m/s

According to the question, the student and the skateboard move backward which counter balance the forward movement.

mass * -v

momentum = 50kg * -v

Therefore,  the student and the skateboard will move backward by 5m/s to counterbalance the forward momentum.

Learn more about momentum below.

https://brainly.com/question/1042017

#SPJ1

The externally applied force is directly proportional to the distance of elongation. F ∝ x, where x is the elongation of materials. F=-kx, where k is the force constant of spring.

From the given,

block 1 is attached to the spring. When there is no force applied, block 1 remains at rest. When the force is applied externally to the spring attached to block 1, it begins to oscillate. While oscillating, block 1 gets displaced to point C.

The net force acts on block 1, and applied force F is acted towards the left and pushes block 1 to move towards the right. The frictional force Ff restricts the motion of block 1, which acts towards the left.

The Normal force Fn acted normally or perpendicular to block 1 and the normal force is acted upwards. The gravitational force Fg, acts downwards to attract block 1. Therefore, the net force acted on block 1 involves applied Force, Frictional force, Normal force, and Gravitational force.

To learn more about Hooke's law:

https://brainly.com/question/29126957

#SPJ1

Answer:  A. He developed the world's first star catalogue.

Explanation: Gan De's contribution to astronomy was the development of the world's first star catalogue , along with his colleague Shi Shen. He also made observations of the planets, particularly Jupiter, and may have been the first to describe one of Jupiter's moons. Unfortunately, all of Gan De's writings have been lost, but fragments of his works' titles and quoted fragments are known from later texts.