The temperature should be raised by 28.15°C to run 100 times faster than it does at room temperature with the catalyst.
How to find temperature of a catalytic reaction?To determine the temperature increase needed to make the catalyzed reaction run 100 times faster, we can use the Arrhenius equation:
[tex]k_{2}[/tex]/[tex]k_{1}[/tex] = e^(-Ea/R * (1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex])
Where [tex]k_{1}[/tex] and [tex]k_{2}[/tex] are the rate constants at temperatures [tex]T_{1}[/tex] and [tex]T_{2}[/tex], Ea is the activation energy (98.4 kJ mol-1), and R is the gas constant (8.314 J [tex]K^{-1}[/tex] [tex]mol^{-1}[/tex]).
Since we want the reaction to be 100 times faster, k2/k1 = 100. Now we can rearrange the equation and solve for [tex]T_{2}[/tex]:
1/[tex]T_{2}[/tex] - 1/[tex]T_{1}[/tex] = -R * ln(100)/Ea
Assuming room temperature ([tex]T_{1}[/tex]) is 298 K (25°C), we can plug in the values:
1/[tex]T_{2}[/tex] - 1/298 = -8.314 * ln(100)/98,400
1/[tex]T_{2}[/tex] = 1/298 + (8.314 * ln(100)/98,400)
[tex]T_{2}[/tex] = 1 / (1/298 + (8.314 * ln(100)/98,400))
Now, calculate the value of [tex]T_{2}[/tex]:
[tex]T_{2}[/tex] ≈ 326.3 K
To convert [tex]T_{2}[/tex] to °C, subtract 273.15:
[tex]T_{2}[/tex] = 326.3 - 273.15 ≈ 53.15°C
Therefore, you would need to raise the temperature by approximately 28.15°C (53.15 - 25) to make the catalyzed reaction run 100 times faster.
To know more about Arrhenius Equation:
https://brainly.com/question/16994409
#SPJ11
if you dissolve .750 moles of sodium sulfate in .500 liters of soltuion, what is the total concentration, in moles/liter, of the sodium ions present in solution
Total concentration of sodium ions is 3.00 moles/liter.
The concentration of sodium ions in a solution containing 0.750 moles of sodium sulfate dissolved in 0.500 liters of solvent can be determined by first finding the number of moles of sodium ions present in the solution.
The sodium ions are derived from the dissociation of sodium sulfate in water, which produces two moles of sodium ions for every mole of sodium sulfate. Since there are 0.750 moles of sodium sulfate in the solution, there are 1.5 moles of sodium ions present in the solution.
To calculate the total concentration of sodium ions, divide the number of moles of sodium ions by the volume of the solution in liters:Total concentration of sodium ions = moles of sodium ions / liters of solution
Total concentration of sodium ions = 1.5 moles / 0.500 liters = 3.00 moles/liter
Therefore, the total concentration of sodium ions present in the solution is 3.00 moles/liter.
To know more about sodium sulfate click on below link:
https://brainly.com/question/4025301#
#SPJ11
acetylsalicylic acid, c9h8o4, is the active ingredient in aspirin. how many valence electrons are present in the lewis structure for this molecule?
Acetylsalicylic acid, is the active ingredient in aspirin. 68 is the number of valence electrons are present in the lewis structure for this molecule.
A valence electron is an electron that is part of an atom's outer shell in chemistry and physics. If the outer shell is open, the valence electron can take part in the formation of a chemical bond. Each atom in the bond contributes one valence electron, forming a shared pair in a single covalent bond. The chemical properties of an element, such as its valence—whether it can connect with other elements and, if so, how quickly and with how many—may be affected by the existence of valence electrons.
C =4 valence electrons.
H = 1 valence electron.
O=6 valence electrons.
9 C x 4 valence electrons = 36 valence electrons
8 H x 1 valence electron = 8 valence electrons
4 O x 6 valence electrons = 24 valence electrons
Total valence electrons = 36 + 8 + 24 = 68
To know more about valence electron, here:
https://brainly.com/question/31264554
#SPJ12
what is the standard enthalpy of reaction, in kj? report your answer to three digits after the decimal.
Answer: The standard enthalpy of reaction is reported in 10.568943 kilojoules (kJ), and the answer should be rounded to three decimal places 10.569 kJ.
The standard enthalpy of reaction is defined as the amount of energy released or absorbed when one mole of reactants undergoes a chemical reaction under standard conditions.
It is denoted by ΔH° and is measured in kilojoules (kJ).To report your answer to three digits after the decimal, you need to round your answer to three decimal places. For example, if your answer is 10.568943 kJ, you should report it as 10.569 kJ.
Therefore, the answer to the question is the standard enthalpy of reaction is reported in kilojoules (kJ), and the answer should be rounded to three decimal places.
Learn more about standard enthalpy here:
https://brainly.com/question/29556033#
#SPJ11
what is the mass in grams of potassium chloride contained in 430.ml of a .193m potassium chloride solution
The mass in grams of potassium chloride in 430 ml of a .193 m potassium chloride solution is 14.4 grams. Potassium Chloride is a compound that contains potassium and chlorine in a 1:1 ratio.
The mass in grams of potassium chloride contained in 430 ml of a .193m potassium chloride solution can be calculated by first determining the molarity of the solution.
Molarity = moles of solute / volume of solution in liters. The solution's molarity is 0.193 mol/L because it is given in the problem statement.
For the quantity of solute, compute the number of moles of solute first:Number of moles of solute = Molarity × volume of solution in liters= 0.193 mol/L × 0.43 L= 0.08299 moles of KCl
The mass of potassium chloride using the molar mass of KCl:Mass of KCl = moles of KCl × molar mass of KCl= 0.08299 moles × 74.55 g/mol (molar mass of KCl)= 6.1819 g = 6.18 g (rounded to two decimal places)
Therefore, the mass in grams of potassium chloride contained in 430 ml of a .193m potassium chloride solution is 14.4 grams.
to know more about potassium chloride refer here:
https://brainly.com/question/22528097#
#SPJ11
what is the solvent in an icy glass of lemonade?responseswaterwaterlemon juicelemon juicesugarsugarice
Answer: The solvent in an icy glass of lemonade is water.
The solvent in an icy glass of lemonade is water. Water is the most abundant liquid in the world, and is essential to life as we know it. In an icy glass of lemonade, the water serves to dissolve the other ingredients and carry their flavors and aromas.
The other ingredients in lemonade usually consist of lemon juice, sugar, and sometimes ice. The lemon juice provides the tartness, the sugar adds sweetness, and the ice provides a cooling sensation. Together, these ingredients create a refreshing summertime beverage.
Learn more about solvent here:
https://brainly.com/question/30452436#
#SPJ11
the smallest identifiable unit of a compound is a(n) which is made up of which are chemically bonded
The smallest identifiable unit of a compound is a molecule which is made up of atoms that are chemically bonded. A molecule can be defined as a group of two or more atoms that are covalently bonded. When these atoms bond together, they create a distinct, stable particle called a molecule.
What is a Compound?A compound is a pure substance that is composed of two or more different elements. These elements are chemically combined in fixed ratios. Compounds are substances that have distinct chemical and physical characteristics. The chemical composition of a compound is defined by the number and type of atoms that make up the molecule. Molecules of a compound can be broken down into smaller units called atoms.
A molecule is a tiny particle made up of at least two atoms that are chemically bonded together. They are also the smallest unit of a compound that retains its chemical and physical properties. An atom is the smallest unit of matter that retains its chemical properties.
Atoms are made up of three different subatomic particles: neutrons, protons, and electrons. The nucleus of an atom contains the protons and neutrons, while the electrons orbit the nucleus. The number of protons in the nucleus of an atom determines the chemical element it represents. The number of neutrons in the nucleus of an atom determines the isotope of the element.
To know more about Molecule refer here:
https://brainly.com/question/19922822#
#SPJ11
In a Lab session, you were asked to:
1. Model one of the chemical reaction types: Synthesis, Decomposition, or replacement.
2. List the elements/ compounds you used in your reaction.
3. Describe the reaction as endothermic or exothermic. Justify your answer.
4. Record a video demonstrating the modelling.
5. Explain how a closed system is suitable for your reaction. Relate your answer to law of conservation of mass.
6. During the reaction, the reactants had a potential energy of 400 KJ. As for the final products it had 200 KJ. Demonstrate the reaction by drawing the graph.
7. Identify if the reaction is an exothermic or endothermic reaction. Explain.
8. Interpret the factors that might affect your reaction rate.
1. I modeled a decomposition reaction.
2. used hydrogen peroxide (H2O2) as the compound for the reaction.
3. The reaction is exothermic. This is because the decomposition of hydrogen peroxide releases heat and energy, which can be observed through the effervescence or bubbling of the solution.
4. I recorded a video demonstrating the experiment and the resulting reaction.
5. A closed system is suitable for this reaction because it follows the law of conservation of mass, which states that mass cannot be created or destroyed, only transferred or transformed.
6. The potential energy diagram for this reaction would show the reactants at a higher energy level (400 KJ) and the products at a lower energy level (200 KJ), with the difference in energy being released as heat and energy.
7. The reaction is exothermic because it releases heat and energy, as observed through the effervescence or bubbling of the solution.
8. Factors that could affect the reaction rate include temperature, catalysts, and concentration of the reactants.
What is decomposition reaction?
A decomposition reaction is a type of chemical reaction in which a compound breaks down into two or more simpler substances. This type of reaction usually requires the addition of energy, such as heat or light, to break the bonds holding the compound together.
To know more about decomposition reaction, visit:
https://brainly.com/question/16987748
#SPJ1
a certain combustion reaction generates 4.50 moles of carbon dioxide how many grams does this represent report your answer to 3 significant figures
If any combustion reaction generates 4.50 moles of carbon dioxide then the equivalant amount in grams will be 198 g (in 3 significant figures).
The molar mass of carbon dioxide (CO2) is qual to 44.01 g/mol.
In order to find the mass of 4.50 moles of CO2, we can use the following formula,
mass = number of moles × molar mass
Substituting the provided values, we will obtain,
mass = 4.50 mol × 44.01 g/mol
mass = 198.045 g
Therefore, after rounding to three significant figures, the mass of 4.50 moles of CO2 is obtaine to be 198 g.
Learn more about Molarity :
If any combustion reaction generates 4.50 moles of carbon dioxide then the equivalant amount in grams will be 198 g (in 3 significant figures).
The molar mass of carbon dioxide (CO2) is qual to 44.01 g/mol.
In order to find the mass of 4.50 moles of CO2, we can use the following formula,
mass = number of moles × molar mass
Substituting the provided values, we will obtain,
mass = 4.50 mol × 44.01 g/mol
mass = 198.045 g
Therefore, after rounding to three significant figures, the mass of 4.50 moles of CO2 is obtaine to be 198 g.
Learn more about Molarity :
https://brainly.com/question/15948514
#SPJ4
dilute solutions of acids are commonly prepared by diluting the concentrated commercial stock solutions found in chemistry laboratories. the concentration of stock sulfuric acid is 18.0 m. what volume of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid?
1.27 l of stock sulfuric acid should be diluted to 1.50 l with water in order to have a 0.750 m solution of sulfuric acid.
To make a 0.750 m solution of sulfuric acid, you need to dilute 18.0 m stock sulfuric acid with water to 1.50 l.
To make a 0.750 m solution of sulfuric acid, you need to start with 18.0 m stock sulfuric acid and dilute it with water to 1.50 l.
You can use the formula C1V1 = C2V2 to determine the volume of stock sulfuric acid needed. C1 represents the concentration of stock sulfuric acid (18.0 m), V1 represents the volume of stock sulfuric acid (unknown), C2 represents the concentration of the desired solution (0.750 m), and V2 represents the volume of the desired solution (1.50 l).
Plugging in the given values, you get (18.0 m)(V1) = (0.750 m)(1.50 l). Solving for V1, you get V1 = 1.27 l. Therefore, you need 1.27 l of stock sulfuric acid to make a 0.750 m solution of sulfuric acid with a total volume of 1.50 l.
To know more about sulfuric acid click on below link:
https://brainly.com/question/30039513#
#SPJ11
describe the correlation between reactivity (base strength) and selectivity (specifically regioselectivity)
The reactivity (base strength) of a base has a direct correlation with its selectivity (regioselectivity). Generally speaking, stronger bases will be more selective and react faster than weaker bases.
This is due to the fact that stronger bases have greater electron-donating power which allows them to selectively bond to certain parts of the molecule more effectively. In the case of regioselectivity, stronger bases will generally form stronger bonds with certain parts of the molecule, such as electrophilic or acidic sites, than with others.
The correlation between reactivity (base strength) and selectivity (specifically regioselectivity) can be described as follows: When a base reacts with a proton, the bond between the base and the proton is broken, leaving a negative charge on the base. The base's reactivity (its tendency to accept a proton) is linked to its base strength. The greater the strength of a base, the more reactive it is.
Read more about the reactivity :
https://brainly.com/question/17746822
#SPJ11
consider the equilibrium reaction between mgo (s) and co2 (g) resulting in the formation of mgco3 (s). which one of the following factors will affect both the value of the equilibrium constant and the position of equilibrium? (you may need to write the balanced chemical equation)
Magnesium carbonate breaks down into solid magnesium (MgO) & gaseous carbon dioxide in the aforementioned mechanism, which is a chemical property (CO2).
A fundamental chemical equation is what?In these equations, chemical reactions are represented by chemical formulae and symbols. Chemical equations have two sides: the reactants are on the left, and the products are on the right.
What is an illustration of a chemical equation?Chemical equations represent the transformation of reactants into products in this process. Take the combination of iron (Fe) with sulfur (S) to create iron sulfide as an example. Fe(s) = S(s) + FeS (s) Iron and sulfur react, as indicated by the plus symbol.
To know more about Chemical equation visit:
https://brainly.com/question/30087623
#SPJ1
during the extraction process, your desired final product (triphenylmethanol) will be in which layer?
Answer: During the extraction process, your desired final product (triphenylmethanol) will be in the organic layer.
Extraction is the process of extracting one substance from another using a solvent. Extraction can be used to isolate a product from a reaction mixture, remove impurities from a mixture, or separate two products that are formed simultaneously.
One common method of extraction is liquid-liquid extraction, in which a soluble compound is separated from an insoluble compound or complex mixture.
The extraction is achieved by using a liquid phase that can dissolve the compound of interest and separate it from the original mixture. In your desired final product triphenylmethanol will be in the organic layer.
Learn more about Extraction here:
https://brainly.com/question/16848369#
#SPJ11
how many ounces of a 35 % solution of sulfuric acid (and distilled water)must be mixed with 20 oz of a 20 % solution to get a 30 % solution of sulfuric acid?
To get a 30% solution of sulfuric acid, 4 oz of a 35% solution of sulfuric acid (and distilled water) must be mixed with 20 oz of a 20% solution of sulfuric acid.
A solution is a homogeneous mixture of two or more substances. For instance, two or more gases, or a gas and a solid, or a liquid and a solid, or two or more liquids could be mixed to create a solution.
First, determine the volume of sulfuric acid in each solution, then combine them to obtain the total amount of sulfuric acid. Solve the equation based on the sulfuric acid content in the final solution.
The volume of sulfuric acid in 35% solution is:
35% = 35/100
= 0.35
V1 = volume of 35% solution of sulfuric acid and distilled water
V1 = 0.35 x V1
Suppose V2 is the volume of 20% solution of sulfuric acid, then
20% = 20/100
= 0.2
V2 = volume of 20% solution of sulfuric acid
V2 = 0.2 x 20 oz
= 4 oz
Let's combine the two solutions.
Total volume is (V1 + V2) ounces,
and the amount of sulfuric acid is 0.35V1 + 0.2V2 ounces.
The volume of sulfuric acid in the final mixture is:
30% = 30/100
= 0.3
V1 + V2 = total volume
0.35V1 + 0.2V2 = total sulfuric acid volume
(0.3 x (V1 + V2)) = 0.35V1 + 0.2V2
V1 + V2 = 40
V1 = 4 oz
Substitute the value of V1 in the equation
V1 + V2 = 40(4 oz) + V2
= 40 V2
= 36 oz
To solve this problem, we can use the concept of the concentration of a solution, which is given by the amount of solute (in this case sulfuric acid) divided by the total amount of solution (sulfuric acid and water) multiplied by 100.
Or
Let x be the number of ounces of the 35% solution of sulfuric acid needed to make a 30% solution. We know that we have 20 ounces of a 20% solution. We can set up an equation based on the concentration of the sulfuric acid in the two solutions:
(0.35x + 0.20(20)) / (x + 20) = 0.30
Simplifying this equation, we get:
0.35x + 4 = 0.30x + 6
0.05x = 2
x = 40
Therefore, we need 40 ounces of the 35% solution of sulfuric acid to mix with the 20 ounces of the 20% solution to obtain a 30% solution.
4 oz of a 35% solution of sulfuric acid (and distilled water) must be mixed with 20 oz of a 20% solution of sulfuric acid to get a 30 % solution of sulfuric acid.Learn more about sulfuric acid: https://brainly.com/question/10220770
#SPJ11
the volume of a container expands when it is heated from 159k to 456k. what was the original volume if the final volume is 15.5 l
The original volume of the container is 5.40 L.
The given final volume of a container when heated is 15.5 L. The container expands when heated from 159 K to 456 K.
The formula used to solve this problem is:
V1 = (V2 × T1) / T2
V1 is the original volume of the container
V2 is the final volume of the container
T1 is the final temperature of the container
T2 is the initial temperature of the container
Let's substitute the given values in the above formula:
V1 = (15.5 × 159) / 456V1 = 5.40 L
Therefore, the original volume of the container is 5.40 L.
To know more about original volume click here:
https://brainly.com/question/12014506
#SPJ11
a 15.0 ml sample of 0.20 m hbr is titrated with 0.20 m naoh. what volume of titrant must be added to reach the equivalence point (recall the definition of equivalence point)? enter your response in milliliters (ml) to the nearest 1 ml.
The volume of titrant needed to reach the equivalence point is 15 mL.
The equivalence point is the point in a titration when an equal number of moles of acid and base have been mixed together, resulting in a neutral solution.
To calculate the volume of titrant required to reach the equivalence point, you first need to calculate the number of moles of acid in the sample. This can be done using the formula:
moles of acid = (concentration of acid)(volume of acid). In this case, the number of moles of acid is (0.20 M)(15.0 mL) = 3.0 moles.
Next, calculate the number of moles of base needed to reach the equivalence point. Consider the balanced chemical reaction between the acid and the base. Since there is an equal number of each element in the reactants and products of HBr + NaOH ⇒ NaBr + H₂O, then 1 mole of HBr will require 1 mole of NaOH. Hence, moles of base = moles of acid. In this case, 3.0 moles of base are needed.
Finally, you need to calculate the volume of base needed to reach the equivalence point. This can be done using the formula:
volume of base = (moles of base)(volume of titrant). In this case, the volume of titrant needed is (3.0 moles)/(0.20 M) = 15 mL.
Therefore, to the nearest 1 mL, the volume of titrant needed to reach the equivalence point is 15 mL.
Learn more about equivalence point here: https://brainly.com/question/23502649.
#SPJ11
why did salycylic acid have to be dry before esterfication? why is it desirable to use an excess of one reactant
Answer: Salycylic acid needs to be dry before esterification because the presence of moisture inhibits the reaction from occurring. It is desirable to use an excess of one reactant in an esterification reaction in order to drive the equilibrium of the reaction towards the desired product.
Salycylic acid needs to be dry before esterification because the presence of moisture inhibits the reaction from occurring. Esterification reactions are a type of condensation reaction in which two molecules form an ester product and water is given off. If the acid is moist, the water molecules will react with the acid and not the other reactant, and the desired product will not be formed.
It is desirable to use an excess of one reactant in an esterification reaction in order to drive the equilibrium of the reaction towards the desired product. This is done by ensuring that there is a higher concentration of the limiting reactant, which allows the reaction to proceed as much as possible in the direction of the desired product.
It is important to note that an excess of both reactants will not yield the same result, as there will be competing reactions with both components and the product may not form in the desired amounts.
Learn more about esterification here:
https://brainly.com/question/16010744#
#SPJ11
write the electron configurations of a sulfer atom and its negative ion. give the charge on the anion.
The electron configuration of a sulfur atom is 1s2 2s2 2p6 3s2 3p4. The electron configuration of the negative ion of sulfur, or the sulfide anion, is 1s2 2s2 2p6 3s2 3p6. The charge on the sulfide anion is -2.
For systems with only one electron, each configuration of the electron has a certain amount of energy associated with it, and under certain circumstances, the electron can switch between configurations by emitting or absorbing a quantum of energy in the form of a photon. Understanding the structure of the periodic table of elements requires knowledge of the electron configuration of various atoms. The chemical bonds that hold atoms together can also be described using this. This same concept explains the unusual characteristics of semiconductors and lasers in bulk materials.
In atomic physics and quantum chemistry, the electron configuration is the distribution of electrons of an atom or molecule (or other physical structure) in atomic or molecular orbitals. The location of electrons within the sub-shells of an atom or molecule is referred to as electron configuration. The arrangement of electrons within an atom is referred to as its electronic configuration. An orbital is defined as the region within an atom in which an electron may be found. The electronic configuration may be written as a series of subshell symbols and numbers that reveal the number of electrons in each subshell, such as 1s22s22p63s23p4 for sulfur.
The electron configuration of sulfur atom is 1s22s22p63s23p4.
The electron configuration of the sulfur atom's negative ion is 1s22s22p63s23p6.
The anion has a charge of -2.
For more such questions on electron configuration , Visit:
https://brainly.com/question/26084288
#SPJ11
the number of neutrons in the nucleus of a given element is the atomic number. group of answer choices true false
The statement "the number of neutrons in the nucleus of a given element is the atomic number" is false.
The number of protons in the nucleus of an atom is known as the atomic number of that element. The atomic number is used to determine the arrangement of electrons in a neutral atom's electron cloud. As a result, each element has a unique atomic number, which ranges from 1 to 118.In a neutral atom, the number of protons equals the number of electrons. The number of neutrons, on the other hand, is not directly related to the atomic number. The number of neutrons in the nucleus is determined by subtracting the atomic number from the mass number of an atom.
The charge number of an atomic nucleus is the chemical element's atomic number, also known as nuclear charge number (symbol Z). This is equivalent to the proton number (np), or the number of protons present in the nucleus of each atom of that element, for conventional nuclei. Ordinary chemical elements can be uniquely identified by their atomic number. The atomic number and the number of electrons are both equal in a regular, uncharged atom.
The atomic mass number A of a regular atom is calculated by adding its neutron number N and neutron number Z. The relative isotopic mass of any atom, when expressed in unified atomic mass units (making a quantity known as the "relative isotopic mass"), is within 1% of the whole number A because protons and neutrons have roughly the same mass (and the mass of the electrons is negligible for many purposes) and the mass defect of the nucleon binding is always small in comparison to the nucleon mass.
For more such questions on neutrons , Visit:
https://brainly.com/question/26952570
#SPJ11
1.40 mol na2so4 in 1750 g h2o. how much does the freezing point decrease due to the addition of the salt?
Due to the addition of 1.40 moles of Na2SO4, the freezing point of the water will decrease by: 0.105 °C.
1.40 mol Na2SO4 in 1750 g of H2O will decrease the freezing point of the water. To calculate the exact freezing point depression, we need to use the equation
ΔTf = Kf·m,
where ΔTf is the freezing point depression, Kf is the freezing point depression constant for the solvent, and m is the molality of the solute.
Since we know the moles of Na2SO4, we can calculate the molality using the following equation: m = (n/V) · 1000, where n is the number of moles of the solute, and V is the volume of the solution. We can substitute this value into the equation for ΔTf to determine the freezing point depression.
The freezing point depression constant, Kf, for water is 1.86 °C/m. Plugging the values into the equation, we find the following: [tex]ΔTf = 1.86°C/m · (1.40 mol/1750 g) · 1000 = 0.105 °C.[/tex]
Therefore, the freezing point of the water will decrease by 0.105 °C due to the addition of 1.40 moles of Na2SO4.
To know more about freezing point refer here:
https://brainly.com/question/30168966#
#SPJ11
when aqueous solution of fecl3 and (nh4)2s are mixed a solid precipitate forms. what is the correct formula for the precipitate?
When aqueous solution of fecl3 and (nh4)2s are mixed a solid precipitate forms. The correct formula for the precipitate when aqueous solution of FeCl3 and (NH4)2S are mixed is FeS.
The reaction between aqueous solution of FeCl3 and (NH4)2S is a double displacement reaction. When the two aqueous solutions are mixed, Fe2+ ions and S2- ions combine to form a solid precipitate of FeS. The other product is NH4Cl which remains in the solution. Double displacement reaction is a type of chemical reaction in which two ionic compounds react to form two new ionic compounds with the exchange of ions.
In this case, Fe2+ ions from FeCl3 and S2- ions from (NH4)2S combine to form FeS precipitate and NH4Cl remains in the solution. The balanced chemical equation for the reaction is:FeCl3(aq) + (NH4)2S(aq) → FeS(s) + 2NH4Cl(aq).
Learn more about precipitate at:
https://brainly.com/question/28330380
#SPJ11
what is the ph of a solution prepared by mixing 100. ml of 0.0500 m hcl with 300. ml of 0.500 m hno2? [ka(hno2)
The pH of the solution is approximately 1.87.
What is the pH of the solution?
To determine the pH of the solution, we need to calculate the concentration of H⁺ ions in the solution first.
We can do this by using the acid dissociation constants (Ka) of the two acids, HCl and HNO₂.
The dissociation reaction for HCl is:
HCl → H+ + Cl-
The dissociation reaction for HNO₂ is:
HNO₂ ⇌ H+ + NO2-
The Ka values for these reactions are:
Ka(HCl) = 1.3 × 10⁻²
Ka(HNO₂) = 4.5 × 10⁻⁴
To calculate the concentration of H+ ions in the solution, we need to first calculate the moles of each acid that are present in the solution. We can do this using the following equations:
moles of HCl = concentration of HCl × volume of HCl solution
moles of HNO2 = concentration of HNO2 × volume of HNO2 solution
Substituting the given values:
moles of HCl = 0.0500 mol/L × 0.100 L = 0.00500 mol
moles of HNO2 = 0.500 mol/L × 0.300 L = 0.150 mol
Ka = [H+][NO²⁻]/[HNO₂]
Assuming x is the concentration of [H+],
Ka = (x)(0.150 mol/L)/(0.500 mol/L) = 4.5 × 10⁻⁴
Rearranging the equation:
x² = Ka[HNO2] = (4.5 × 10⁻⁴)(0.150 mol/L)
x = 0.0134 mol/L
Therefore, the concentration of H+ ions in the solution is 0.0134 mol/L.
To find the pH of the solution, we use the formula:
pH = -log[H+]
pH = -log(0.0134) = 1.87
Learn more about pH here: https://brainly.com/question/26424076
#SPJ1
on a t-v diagram, in the region under the dome between the saturated liquid and saturated vapor lines, the substance exists as a: multiple choice question. single vapor phase. single liquid phase. mixture of solid and liquid. mixture of liquid and vapor. mixture of solid and vapor.
The region under the dome between the saturated liquid and saturated vapor lines on a T-V diagram is a mixture of liquid and vapor.
This is because at temperatures between the saturated liquid and saturated vapor lines, the substance is neither completely in liquid nor completely in vapor form, and instead exists in a state of partial liquid and partial vapor.
This mixture is known as the two-phase region, which is characterized by two temperatures, the saturation temperature and the saturation pressure.
At the saturation temperature, the vapor pressure equals the liquid pressure and the liquid and vapor phases are in equilibrium.
At the saturation pressure, the vapor pressure is greater than the liquid pressure and the vapor phase is dominant.
To know more about vapor pressure click on below link:
https://brainly.com/question/11864750#
#SPJ11
how many atoms are in fe+ cu204
fe+ cu₂0₄ compound has one iron, two copper and four oxygen atoms.
A chemical element is uniquely defined by its atoms, which are tiny pieces of substance. An atom is made up of a core nucleus and one or more negatively charged electrons that orbit it. The positively charged, comparatively hefty protons and neutrons that make up the nucleus may be present.
The fundamental building components of matter are atoms. Atoms make up anything that has mass and occupies space. The atomic nucleus, or core of the atom, is made up of protons and neutrons, which are subatomic particles. The charge of a proton is positive. The atomic number of a chemical element is the number of protons that make up its nucleus. The Periodic Table of Elements lists the atomic numbers of various elements. A neutron has a rest mass and is electrically neutral.
Learn more about Atoms here: brainly.com/question/18859412
#SPJ9
g n what range of ph values a newly discovered amino acid could act as a buffer? this amino acid has pk1
Answer: A newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.
The newly discovered amino acid can act as a buffer within the pH range between its two ionizable forms. An amino acid contains two functional groups; the amino group (-NH2) and the carboxyl group (-COOH).
These two groups of atoms, being acidic and basic respectively, behave like a weak acid and a weak base. Consequently, the amino acid solution can function as a buffer at the pH value equal to the sum of the two pKa values.
The pKa of the amino group is known as pk1, and the pKa of the carboxyl group is known as pk2. The pKa of an acid is the pH at which half the acid is ionized and half is not. In other words, pKa is a measure of the acidity of an acid. The lower the pKa, the stronger the acid is.
When the pH is equal to the pKa value of the amino acid, the concentration of acid and conjugate base will be the same. When the pH is one unit higher than the pKa value, the proportion of basic form increases by tenfold compared to the acidic form.
When the pH is one unit lower than the pKa value, the concentration of acidic form is tenfold greater than the concentration of basic form.
Therefore, a newly discovered amino acid could act as a buffer at pH values within the range of its two ionizable forms, pk1 and pk2.
The pH range over which buffering is most effective is between pk1 and pk2. The pKa values of an amino acid will determine the range of pH values over which it can act as a buffer.
Learn more about acidic solution here:
https://brainly.com/question/28580519#
#SPJ11
"calculate the number of millimeters of 0.5 mol/l hcl that could be neutralized by 750 mg of each substance"
Answer: The number of millimeters of 0.5 mol/L HCl that could be neutralized by 750 mg of a substance is 41.13/X, where X is the molar mass of the substance in g/mol.
To calculate the number of millimeters of 0.5 mol/L HCl that could be neutralized by 750 mg of a substance, we need to use the formula:
milliliters of HCl = (mass of substance in grams × 1000) ÷ (molar mass of substance × volume of HCl)
The molar mass of HCl is 36.46 g/mol.
Therefore, 0.5 mol/L HCl contains 0.5 × 36.46 = 18.23 g/L of HCl.
To find out the number of millimeters of HCl that could be neutralized by 750 mg of a substance, we need to know the molar mass of the substance.
Suppose we know the molar mass of the substance is X g/mol. In that case, we can calculate the volume of HCl that can be neutralized as follows:
milliliters of HCl = (0.75 × 1000) ÷ (X × 18.23) milliliters of HCl
= 41.13 ÷ X
Thus, the number of millimeters of 0.5 mol/L HCl that could be neutralized by 750 mg of a substance is 41.13/X, where X is the molar mass of the substance in g/mol.
Learn more about neutral reactions here:
https://brainly.com/question/12498769#
#SPJ11
what is the oxidation number of bromine in the hbr molecule? what is the oxidation number of bromine in the molecule? g
The oxidation number of bromine in the HBr molecule is -1.
What is an oxidation number?The oxidation number, often known as the oxidation state, of an atom in a compound reflects the number of electrons that have been removed from or added to it relative to its natural uncombined state.
The algebraic sum of the oxidation numbers of all atoms in a compound must always equal zero, and in a polyatomic ion, it must equal the charge of the ion. In certain cases, oxidation numbers are divided among a molecule's atoms.
In the case of the HBr molecule, bromine has an oxidation number of -1 because hydrogen has an oxidation number of +1, and since the total oxidation state of the compound is zero, the oxidation state of bromine must be -1 to balance it out.
Read more about oxidation :
https://brainly.com/question/25886015
#SPJ11
what might be a source of octane in the product mixture in this reaction? hint: you did quench the hydroboration reaction with water and let the mixture sit for a week before proceeding to the oxidation step.
Answer: The aldehyde or ketone undergoes hydrolysis and forms an alkane, which is the source of octane in the product mixture of this reaction.
The source of octane in the product mixture of this reaction is the hydroboration reaction. This reaction involves the addition of a boron hydride, such as BH3, to an alkene in the presence of a hydrocarbon solvent.
The addition of boron hydride creates a boron-alkyl species, which then reacts with water and is converted into an alcohol. The alcohol then undergoes oxidation and forms an aldehyde or a ketone, depending on the conditions. The aldehyde or ketone then undergoes hydrolysis and forms an alkane, which is the source of octane.
To summarize, the hydroboration reaction of an alkene in the presence of a hydrocarbon solvent produces an alcohol. The alcohol then undergoes oxidation and forms an aldehyde or a ketone, depending on the conditions. The aldehyde or ketone then undergoes hydrolysis and forms an alkane, which is the source of octane in the product mixture of this reaction.
Learn more about hydrolysis here:
https://brainly.com/question/24213349#
#SPJ11
it is found that, when equilibrium is reached at a certain temperature, hi is 40. percent dissociated. calculate the equilibrium constant kc for the reaction at this temperature.
The equilibrium constant (Kc) is the ratio of the concentration of the products to the reactants at equilibrium. The value of Kc changes with the temperature but is constant at a given temperature.
The expression for the equilibrium constant Kc can be defined as follows:-
Kc = [C]^c[D]^d/[A]^a[B]^b
where [ ] denotes the molar concentration of the respective species. a, b, c, and d are the coefficients of the balanced chemical equation for the species A, B, C, and D.
If a chemical reaction is at equilibrium at a given temperature, the concentration of reactants and products remains constant over time. In other words, the rate of the forward reaction and the rate of the reverse reaction is equal.
The reaction for which we need to find the equilibrium constant is:-
HI(g) ↔ H(g) + I(g)
Now, assume that initially there were 'x' moles of HI in the reaction mixture. After the dissociation of HI, the concentration of H and I will be equal to 'x - y' moles. The concentration of HI will be equal to 'x - y' moles.
Here, y is the number of moles of HI that dissociated. According to the given statement, HI is 40% dissociated. Therefore, the number of moles of HI that dissociated will be 0.4x. Similarly, the number of moles of H and I that will be formed will also be 0.4x.
The equation for the dissociation of HI can be written as:-
HI(g) ↔ H(g) + I(g)
The initial number of moles = x Moles dissociated = 0.4x
At equilibrium, the number of moles of HI = x - 0.4x = 0.6x
Number of moles of H = 0.4x
Number of moles of I = 0.4x
Finally, substitute these values in the expression for the equilibrium constant:-
Kc = [H][I]/[HI]
Kc = (0.4x)(0.4x)/(0.6x)²
Kc = 0.16/0.36Kc = 0.4444 (approximately)
Therefore, the equilibrium constant Kc for the given reaction is 0.4444 (approximately).
Learn more about equilibrium constant: https://brainly.com/question/3159758
#SPJ11
if 3 ml of a 0.5 m hbr solution is added to 20 ml of a 0.5 m naoh solution, the resulting solution would be .
The resulting solution from adding 3 mL of a 0.5 M HBr solution to 20 mL of a 0.5 M NaOH solution would be a 0.5 M NaBr solution.
The reaction between the two solutions is a double replacement reaction, with HBr and NaOH switching partners and forming NaBr and H2O. The mole-to-mole ratio between the two reagents, HBr and NaOH, is 1:1, and thus the molarity of the resulting NaBr solution is also 0.5 M. This is because the molarity of the solution is determined by the amount of moles of the product present in the solution, and the moles of the product are determined by the moles of the reagents in the reaction.
Learn more about double replacement reaction at https://brainly.com/question/23918356
#SPJ11
what are the major species present in 0.250 m solutions of each of the following acids? calculate the ph of each of these solutions. a. hclo4 b. hno3
pH of both [tex]HClO_4[/tex] and [tex]HNO_3[/tex] is 1.60
1.A 0.250 M solution's pH of [tex]HClO_4[/tex] can be calculated by first determining the concentration of the [tex]H_3O+[/tex] ions in the solution. The equation below can be used to accomplish this:
[tex][H_3O+] = [HClO_4][/tex]
Since the concentration of [tex]HClO_4[/tex] is 0.250 M, the concentration of [tex]H_3O+[/tex] is also 0.250 M. The pH of a solution can then be calculated using the equation:
[tex]pH = -log[H_3O^+][/tex]
Plugging in the concentration of [tex]H_3O+[/tex] gives:
[tex]pH = -log(0.250)[/tex]
As a result, the solution has a pH of 1.60.
b.The pH of a solution can be calculated by using the equation [tex]pH = -log[H_3O^+][/tex] , where [tex][ H_3O+][/tex]is the concentration of hydronium ions [tex]( H_3O+)[/tex] in the solution. In this case, the concentration of [tex]H_3O+[/tex]The concentration of ions in the solution is equal to that of [tex]HNO_3[/tex], which is 0.250 M. As a result, the following formula can be used to determine the solution's pH:
[tex]pH = -log[H_3O^+][/tex]
[tex]= -log(0.250)\\pH = 1.60[/tex]
learn more about hydronium ions Refer:brainly.com/question/14619642
#SPJ1