Which type of energy is the total energy of kinetic energy and potential energy
in a system of objects?
A. sound energy
B. radiant energy
C. mechanical energy

Do 19565 ft × 3.28084 ft ...than

answer will come in meter than convert it into kilo meter

Number of grams of sodium sulfate that would be required to produce 120 grams of aluminum sulfate is 149g.

Mole is defined as the ratio of given mass to the molar mass of the substance.

Given,

Mass of aluminum sulfate = 120 g

Molar mass of Aluminum sulfate = 342g

Moles of aluminum sulfate can be calculated as

Given mass/ Molar mass

= 120/342

= 0.35mol

3(Na2SO4) + 2Al ----- Al2(SO4)3

We noticed that,

3 mol of Na2SO4 produces 1 mole of aluminum sulfate.

1 mole of sodium sulfate = 1/3 mole of aluminum sulfate.

Let x be the number of moles of (Na2SO4) = 1/3 × x = 0.35 mol of aluminum sulfate.

So, x = 1.05 mol × 142 = 149.1g.

Thus, we concluded that the number of grams of sodium sulfate that would be required to produce 120 grams of aluminum sulfate is 149g.

learn more about Mole:

https://brainly.com/question/14676971

#SPJ4

The baking of bread follows the law of conservation of mass. Baking is an irreversible chemical change in which chemical substances-  Ethanol and Carbon dioxide are formed.

During baking the dough loses weight during cooling. The total percentage loss is around 13%.Mass of the bread is also lost as steam. Carbon dioxide is also formed due to yeast, which converts the sugar. But the volume of the bread doubles. The steam puffs up the bread, giving it high hydration. After the bread is baked, the puffiness is reduced which makes the bread fluffy and light. 

Therefore, baking is a chemical change, occurring through the process of fermentation, which includes a series of steps to make a bread in which carbon dioxide rises the dough which eventually settles after cooling. 

Learn more about Fermentation of bread here:

https://brainly.com/question/23241540

#SPJ9

`

hi brainly user! ૮₍ ˃ ⤙ ˂ ₎ა

⊱┈────────────────────────⊰

Answer:

The melting of the caps increases the concentration of CO2 in the water, making its absorption faster.

⊱┈────────────────────────⊰

Explanation:

The polar caps of our planet have in their composition several elements, among them the CO2 that is absorbed by the atmosphere. Cold waters, which are present in the Arctic, have an easier time absorbing CO2 compared to other waters.

When glaciers melt, the CO2 that is present in the mixture is dissolved in the ocean, increasing its concentration. The cold waters that came from the ice caps increase the absorption of CO2.

Learn more about natural methods remove CO2 from the atmosphere in:

https://brainly.com/question/14323197

#SPJ2

Gold has a density of 19.2 gm/cm.

The necklace weighs 19.21 g.

Water was initially present in 20.8 ml.

22 ml is the total amount of water.

Due to its great density, which results from the fact that each of gold's atoms is individually highly heavy, gold is referred to as a heavy metal.

(a) The necklace's volume is 22 - 20.8 ml.

- The density of a necklace is determined by its mass and volume.

The necklace's density is 19.21 divided by 1.2.

Necklace has a density of 16 gm/ml.

(b) The necklace is constructed of alloy rather than pure gold.

This is due to the necklace's varied density from that of pure gold.

It follows that the necklace contains something else in addition to the gold.

Learn more about gold here-

https://brainly.com/question/4838993

#SPJ9

On converting 23.4 kilojoules of energy into calories we get 5.6 calories of energy.

We have energy in kilojoules.

We have to convert it into calories.

In 1 kilojoules there are 0.239 calories.

According to the question -

Energy in kilojoules = 23.4 kJ

In order to find the equivalent energy in calories, multiply 23.4 by 0.239 -

23.4 x 0.239 = 5.6 calories.

Hence, in 23.4 KJ there are 5.6 calories.

To solve more questions on Unit conversions, visit the link below-

https://brainly.com/question/4409880

#SPJ1

The beryl species includes such well-known gemstones as aquamarines, emeralds, and morganites.

Gemstones are synthetic mineral crystals that have been cut and polished for use in jewelry or other adornments. It is also referred to as a superb gem, jewel, expensive stone, and semiprecious stone.

But even though they are not minerals, other rocks like lapis lazuli, opal, and obsidian, as well as occasionally biological materials like amber, jet, and pearl, are regularly used to make jewelry and are frequently regarded as gemstones.

Although soft minerals are more uncommon than hard gemstones, some of them are utilized in jewelry because of their brilliance or other aesthetically pleasing physical properties. Another quality that raises the value of diamonds is rarity. Another factor is reputation.

Along with jewelry, the two main categories of luxury art in early antiquity were hardstone sculptures and engraved jewels.

To learn more about gemstones  from the given link: https://brainly.com/question/2014808

#SPJ4

The epinephrine hormone is released in the human body during stress and increases the metabolic ratio of the body. The simplest molecular formula for epinephrine is C₉H₁₃NO₃.

Epinephrine is also known as adrenaline, it is both the hormone and neurotransmitter.

As a hormone, its made and released by your adrenal gland.

As a neurotransmitter, its a chemical messenger that helps transmit nerve signal across the nerve endings to another nerve cell.

Epinephrine is also called as catecholamines, as a norepinephrine and dopamine.

Formula - C₉H₁₃NO₃

Molar mass - 183.204 g/mole

As a neurotransmitter epinephrine plays a small role, small amount is produced in your nerves.

The major role of epinephrine is in hormones. It releases by your adrenal  glands in response to stress. This reaction causes a number of change in body and is known as a fight -or- flight response.

Thus, epinephrine hormone is released in the human body during stress and increases the metabolic ratio of the body. The simplest molecular formula for epinephrine is C₉H₁₃NO₃.

To learn more about epinephrine, refer to the link below:

https://brainly.com/question/13887971

#SPJ1

A scientific principle describes a more specific set of relationships than is usually identified as law.

A scientific law describes an important relationship that is observed in nature to occur consistently time after time. The difference between a scientific principle and scientific law is usually one of the extents of the phenomena covered by the explanation, but there is not always a clear distinction between the two.

A scientific law is an explanation of an observed phenomenon. No explanation is given as to why or why the phenomenon exists. Explanations of phenomena are called scientific theories. Scientific laws predict outcomes for specific initial conditions. You can predict the color of your child's hair, or how far a baseball will travel if it is shot at a certain angle. Theory by contrast attempts to provide the most logical explanation for why things happen the way they do.

Learn more about A scientific law here:-https://brainly.com/question/11313296

#SPJ1

Answer:

only 1 according to pauli no 2 electron have same set of quantum number

answer is A 1

Explanation:

according to pauli no 2 electron have same set of quantum number

Answer:They occur when the Earth, the Sun, and the Moon are in a line. The gravitational forces of the Moon and the Sun both contribute to the tides.Spring tides occur during the full moon and the new moon. During the moon's quarter phases the sun and moon work at right angles, causing the bulges to cancel each other.

Neap tides occur during the first and third quarter moon, when the moon appears "half full." NOAA's tide and tidal current predictions take into account astronomical considerations due to the position of the moon and the sun.

Explanation:

If the students look out a window for 5 min. and record the number of vehicles that pass, the type of vehicle and color of the vehicle, then the students are observing (Option D is correct).

The scientific method is a series of sequential steps by which we can collect empirical evidence about a scientific question, and it involves observation and experimentation.

In conclusion, If the students look out a window for 5 min. and record the number of vehicles that pass, the type of vehicle and color of the vehicle, then the students are observing (Option D is correct).

Learn more about the scientific method here:

https://brainly.com/question/17216882#

#SPJ1

Answer:

A pure substance is a form of matter that has a constant composition and properties that are constant throughout the sample. Mixtures are physical combinations of two or more elements and/or compounds.

Answer:

Cell are too small to see without a micrscope

Explanation:

Cuz I learned in school

The following which is not one of the basic points of Cell Theory is cells are too small to see without a microscope. Hence option c is correct.

Microscope is defined as a lab tool for inspecting things that are too small to be seen with the eye. The study of small objects and structures under a microscope is known as microscopy. Being microscopic means being difficult to see without a microscope. A specimen that has been placed on a slide is seen, magnified, and imaged using the microscope's optical components.

Cell theory is defined as a cells are believed to be the primary building blocks of all living tissues according to a basic biological scientific hypothesis. The essential unit of structure and function in living things is the cell, according to the current Cell Theory, which is widely recognized. One or more cells make up every living thing. Cellular division creates new cells from existing ones.

Thus, the following which is not one of the basic points of Cell Theory is cells are too small to see without a microscope. Hence option c is correct.

To learn more about microscope, refer to the link below:

https://brainly.com/question/6686502

#SPJ2

volume, length, mass are under Extrinsic properties where as Temperature, Density, Melting Point, Color, Boiling Point, Luster are the Intrinsic properties .

Extrinsic  properties are depend on the amount of the substance you have, all size measurements are extrinsic properties like length of a piece of wire.

Intrinsic properties are essential qualities of a material which characterize each of the substances but independent of the size of a sample.

An extrinsic property is not essential  to the subject where weight is an example of extrinsic property that depends on the strength of the gravitational field.

Learn more about lab intrinsic property, here:

https://brainly.com/question/28528346

#SPJ1

The relative rate of effusion for the orange to blue spheres is 1.263.

Relative rate is defined as the ratio of the incidence rate of disease or death among the group exposed to the incidence rate of disease ox death among the unexposed group.

It is also defined as the rate at any one particular point of time. It can be measured in per second.

Rate of effusion of orange/ Rate of effusion of blue

= [M blue / M orange] ¹/₂

= 485 / 384 = 1.263

Thus, the relative rate of effusion for the orange to blue spheres is 1.263.

To learn more about relative rate, refer to the link below:

https://brainly.com/question/14223290

#SPJ1

The concentration will be 156 minutes later when the rate at which a certain drug is eliminated by the body follows first-order kinetics, with a half life of 78 minutes is 0.275 ug/mL

Half life: It is known as the time needed to minimize the initial concentration to half. It is denoted by the symbol t1/2

For a first order reaction,

t1/2=0.693/k1

The half-life time for a first order reaction is unaffected by the substrate's starting concentration.

Half life of the given drug is 78 min

Total time is 156 min

Number of half lives corresponding to 156 min is 156/78=2

Therefore, the concentration of drug reduced in 156 min =2^2=4 times

Therefore, the number of half-life is present in the given total time is determined by dividing the total time with half-life of the drug.

The initial concentration is 1.1 ug/mL

Final concentration is 1.1/4=0.275 ug/mL

The concentration of drug after 156 min is 0.275 ug/mL

Learn more about half life at:

brainly.com/question/24710827

#SPJ9

The electron charge on barium is +2

Hence electron charge is +2.

Barium (Ba) has a +2 electron charge, that is barium has a positive charge of two.

Barium ion gets +2 charge by losing two electrons from its valence shell and becomes a positively charged ion called a cation. Also, barium is placed in group 2 of the periodic table, therefore has 2 electrons in its valence shell.

It is easier to lose these two outer shell electrons to become an ion than to gain six electrons to attain a stable configuration.

As barium is placed in group 2, it has two electrons, therefore in the given reaction Ba → Ba²⁺, barium when changing to barium ion has a +2 charge.

To learn more about barium and electron charge, visit: https://brainly.com/question/1712729

#SPJ9

You may use a hand-lens to help you make this measurement.  A student investigates the vertical oscillations of the mass–spring system.

Depending on the point of view and the unit of time, velocity is the rate at which the direction of an object in motion changes over time. Velocity is a key concept in kinematics, the branch of classical mechanics that analyzes how bodies move.

The physical vector quantity known as velocity's magnitude and direction must be determined. The scalar absolute value (magnitude) of velocity is speed, a coherently derived unit whose quantity is measured in meters per second in the SI (metric system). In contrast to "5 meters per second east," which is a vector, "5 meters per second" is a scalar.

To learn more about mass–spring system from the given link: https://brainly.com/question/22985863

#SPJ4

A fireplace poker glowing red when you heat it in the fire is referred to as a physical change.

This change is a reversible one in the physical properties of a substance such as the size, color etc. Physical change doesn't alter or change the chemical composition of a substance and no new products are formed in this process.

A fireplace poker glowing red when you heat it in the fire doesn't change the composition and is reversible when allowed to cool down which is why physical change was chosen as the most appropriate choice.

Read more about Physical change here https://brainly.com/question/17609067

#SPJ1

Answer:

Water cycle follws conservation of mass

Explanation:

Water conservation is the practice of using water efficiently to reduce unnecessary water usage. According to Fresh Water Watch, water conservation is important because fresh clean water is a limited resource, as well as a costly one.

Matter is conserved in the water cycle as water is found on Earth in a fixed amount, and is never added nor removed from the earth or its atmosphere. The earth itself is a closed system, with all matter cycling through but never being created nor destroyed.

EXPLANATION IN DETAIL:

Water is one of the key ingredients to life on Earth. About 75 percent of our planet is covered by water or ice. The water cycle is the endless process that connects all of that water. It joins the Earth’s oceans, land, and atmosphere.

The Earth’s water cycle began about 3.8 billion years ago when rain fell on a cooling Earth, forming the oceans. The rain came from water vapor that escaped the magma in the Earth’s molten core into the atmosphere. Energy from the sun helped power the water cycle and Earth’s gravity kept water in the atmosphere from leaving the planet.

The oceans hold about 97 percent of the water on Earth. About 1.7 percent of Earth’s water is stored in polar ice caps and glaciers. Rivers, lakes, and soil hold approximately 1.7 percent. A tiny fraction—just 0.001 percent—exists in the Earth’s atmosphere as water vapor.

When molecules of water vapor return to liquid or solid form, they create cloud droplets that can fall back to Earth as rain or snow—a process called condensation. Most precipitation lands in the oceans. Precipitation that falls onto land flows into rivers, streams, and lakes. Some of it seeps into the soil where it is held underground as groundwater.

When warmed by the sun, water on the surface of oceans and freshwater bodies evaporates, forming a vapor. Water vapor rises into the atmosphere, where it condenses, forming clouds. It then falls back to the ground as precipitation. Moisture can also enter the atmosphere directly from ice or snow. In a process called sublimation, solid water, such as ice or snow, can transform directly into water vapor without first becoming a liquid.

Answer:

Water cycle follws conservation of mass

Explanation:

Answer:

7° it's that cause the crylatise

The temperature at which 4.62 g of KCl begins to crystallize in 10 mL of water is 62° Celsius.

Temperature is the measurement of the hotness or coldness of the body. It is denoted by Kelvin.

Given, m=4.62 g of KCl, V= 10 ml of water

ro = 1 g/ml for water, so m(water)

V x ro = 10ml x 1(g/ml) = 10 g.

Solubility (for water as solvent) is defined as grams of solute dissolved per 100g of water.

So solubility for this case = m(KCl)/m(water) =

4.62g of KCl/10g of water = 46.2 g of KCl/100 g of water.

According to the graph below, KCl's solubility reached 46.2 g/100 g at a temperature of about 62 degrees Celsius.

KCl/10 g of water or 46.2 g of KCl/100 g of water.

Therefore, cooling the solution is necessary for crystallization. Crystallization will occur in this situation as soon as the temperature falls below 62 degrees Celsius (about).

The ultimate conclusion is that this KCl solution in water will begin to crystallize at 62 degrees Celsius (about).

Therefore, the temperature is 62° Celsius.

To learn more about temperature, refer to the link:

https://brainly.com/question/15267055

#SPJ2

Answer:

Observation and recording

Explanation:

She was observing the rainfall for a year, and recorded the events everyday to analyze

Answer:

chloroplast

Explanation:

hope this helps!

Explanation:

number 5 have nucleus....

changed answer=chloroplast

Answer: As the water molecules gain energy, they can escape from the attractions of their neighbors and change into a more fluid state.

Explanation: have a wonderul day !

Answer:

I believe it's 5 because, valence electrons are electrons which are on the outer layer of an atom.

The boiling point of a 0.21 M solution of CaSO₄ in water is  0.107 °C.

For a dilute solution,

molarity ≅ molality

Molarity is approximately equal to the molality.

The elevation in the boiling point is a phenomenon that the boiling point of any liquid will be higher if any other compound is added to it. It depicts that a solution has higher boiling point than that of a solvent.

            ΔTb = i x Kb x m

where,

ΔTb = Boiling point elevation

i = Van't Hoff factor

Kb = Molal boiling point constant

m = Molality of solution

Van't Hoff factor is measurement of effect of solute. It is a ratio of concentration of particles to concentration of substance.

Here, i = 1, as CaSO₄ does not dissociate into ions in water.

Given data -

  Kb = 0.512°C/m

  m = 0.21 m

  i = 1

Putting the values,

ΔTb = 1 x 0.512 x 0.21

ΔTb = 0.107°C

Hence,

The boiling point of CaSO₄ is 0.107 °C

To learn more about CaSO₄,

brainly.com/question/14592314

#SPJ1