Fluorine reacts with xenon but iodine doesn't because fluorine is highly electronegative, it can pull electrons from xenon which is a noble gas and rarely reactive. On the other hand, iodine has low electronegativity and is least reactivity, so doesn't react with xenon.
Fluorine and iodine belongs to the family of halogens with the general electronic configuration ns²np⁵ . So, they have the tendency to attract electrons in their valence shell. Xenon, on the other hand is a noble gas with a stable electronic configuration ns²np⁶.
In family of halogens, Fluorine has the highest electronegativity and iodine has the least due to increase in its size. So, more electronegative fluorine has the tendency to form compounds with xenon whereas both iodine and xenon being less reactive cannot form a bond together.
To know more about reaction of fluorine with xenon here
https://brainly.com/question/2269881
#SPJ4
sodium is lost from the body in the ______.
Answer: In the sweat and urine
Explanation:
Sodium is part of body's mineral. It will easily go out or lose when we we sweat and when we urinate. They lost from the body in form of water contained sodium.
When you work with a chemical that emits hazardous vapors or fumes, what is the best way to protect yourself
When we work with a chemical that emits hazardous vapors or fumes, the best way to protect ourself is by using the fumes hood when working with chemicals.
The best way to protect ourself from the chemical fumes or vapor is the work with chemicals in the fumes hood. the fume hood is the ventilation device that limits the exposure of the hazardous fumes or the vapors.
There are several other ways to protect ourself from the chemical fumes are :
use the chemicals protective clotheswear the respiratory protectionuse the glovesalso wear the eye protectorThese are the some methods use to protect ourself from the chemical fumes or vapors.
To learn more about chemicals here
https://brainly.com/question/14276888
#SPJ4
Which molecular geometry, of an ABn molecule, results in a polar molecule?
O tetrahedral
O trigonal pyramidal
O square planar
O linear
Answer:
trigonal pyramidal
Explanation:
In the case of water.
Name the following straight-chain
alkane.
CH3CH2CH2CH3
A. butane
B. ethane
C. propane
D. methane
Answer:
B. Propane
Explanation:
just did it edge 2022
In an experiment, potassium chlorate decomposed according to the following chemical equation.
2 KClO3 → 2 KCl + 3 O2
If the mass of potassium chlorate was 240 grams, what is the mass of oxygen gas formed?
Answer Choices:
A)
94. 03g
B)
1378g
C)
41. 8g
D)
612. 5g
Grams have been employed to estimate the mass of decomposition. Option C is correct, so.
The chemical response is as follows:
Every mole of must be broken to generate one mole of KCl.
180 kilograms of KCl was produced.
KCl produced in moles =
Produced moles of KCl equals moles.
Degradation of the same material is necessary for the creation of moles of KCl.
Therefore, the moles of the must be decomposed = moles.
Decomposition of mass equals moles of molecular weight
122.2 grammes of moles must be degraded from the mass.
Has to be decomposed for the production of 2 moles of KCl =
kilos.
Thus, kilograms has supplied the mass of decomposition. Option C is correct, however.
To know more about Chemical click here
brainly.com/question/13145357
#SPJ4
A 750.0 mL solution contains 5.00 g of NaOH. If the molar mass of NaOH is 39.9969 g/mol, what is the molarity of the solution? (3 points)
25 M N OH
0.167 M N OH
5,98 M N OH
O 0,0891 M NaOH
help please
Answer:
0.167 M NaOH
Explanation:
Answer:
0.167
Explanation:
Make a claim about how exercise affects the balance of salt and water in your body
NO LINKS
Help me please will give brainliest
well excuse the "s" at the end
Calcium phosphate, Ca 3(PO 4) 2, is used to treat calcium deficiencies. What is the molar mass of this compound
Ca3(PO4)2 has a molar mass of 310.18 g/mol.
Molar mass: What is it?The sum of the molar masses of a compound's component parts determines its molar mass. The molar masses of calcium, phosphorus, and oxygen must be added up in order to determine the molar mass of Ca3(PO4)2.
The molar mass of calcium is 40.08 g/mol.
The molar mass of phosphorus is 30.97 g/mol.
The molar mass of oxygen is 16.00 g/mol.
There are 3 moles of calcium, 2 moles of phosphorus, and 8 moles of oxygen in the compound Ca3(PO4)2.
As a result, the formula for calculating the compound's molar mass is: 340.08 + 230.97 + 8*16 = 120.24 + 61.94 + 128 = 310.18 g/mol
Consequently, Ca3(PO4)2 has a molar mass of 310.18 g/mol.
To know more about molar mass visit: https://brainly.com/question/12127540
#SPJ4
Iodine Monochloride reacts reversibly with Chlorine to form Iodine Trichloride, What will be the color of the equilibrium mixture
Answer:
Yellow
Explanation:
The color of the equilibrium mixture of Iodine Monochloride and Chlorine is yellow. When the mixture is heated, it becomes darker brown in color.
Place the following in order of increasing magnitude of lattice energy:
K2O Rb2S Li2O
least lattice energy < --- --- ---> most lattice energy
I am really struggling with how to calculate lattice energy. So if you could, please explain how you got the answer and how that method could be generalized to other similar questions. I realize it has something to do with the charge product between the elements in the molecule, and secondary to that is the atomic radius... it's just not clicking for me to do on the fly.
Li2O > K2O > Rb2S is the order of given compounds lattice energy in the increasing order
Lattice energy is a measure of the strength of the electrostatic attraction between the positively charged cations and negatively charged anions in an ionic compound. The greater the lattice energy, the stronger the electrostatic attraction and the more stable the compound.The most common method for determining lattice energy is the Born-Haber cycle. This method uses thermochemical data of the individual steps in the formation of an ionic compound to calculate the lattice energy. However, it is often impractical to use this method in a test environment, so a more practical method that is used to compare lattice energies of different compounds is the use of the Coulomb's law which relates the lattice energy to the charge product of the cations and anions and the distance between them.
Learn more about lattice energy here:
https://brainly.com/question/29441166
#SPJ4
SO NOT HALAL MODE :(
Answer:
umm
Explanation:
2. How many moles of helium are present in a balloon at STP if the volume is 3.7 L? Please show all work!
Using the Ideal Gas Law equation: [tex]PV=nRT[/tex]
P = pressure (kPa)V = volume (L)n = moles (mol)R = gas constant( [tex]\frac{kPaL}{molK}[/tex])T = Temperature (K)STP also known as Standard Temperature and Pressure is a set of conditions at sea level
At STP:
P = 101.3 kPa
T = [tex]0^o C[/tex] or 273 K
[tex]n=\frac{PV}{RT}[/tex]
[tex]n=\frac{101.3kPa)(3.7L)}{(8.31\frac{kPaL}{molK})(273K)}[/tex]
[tex]n = 0.16 mol[/tex]
A balloon originally had a volume of 6.5 L at 280 K the volume must be cooled to ___K to reduce volume to 3.3
Answer:
[tex]\boxed {\boxed {\sf 142.2 \ K}}[/tex]
Explanation:
This problem asks us to find the temperature change necessary to make the volume change. We use Charles's Law which states that temperature is directly proportional to the volume of a gas. The formula is:
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
We know the balloon originally had a volume of 6.5 liters and a temperature of 280 Kelvin. Then, the temperature was cooled so the new volume is 3.3 liters. However, the exact new temperature is unknown.
Substitute all known values into the formula.
[tex]\frac {6.5 \ L}{280 \ K}=\frac{3.3 \ L}{T_2}[/tex]
Now, solve the new temperature (T₂). First, cross multiply. Multiply the 1st numerator by the 2nd denominator. Then, multiply the 1st denominator by the 2nd numerator.
[tex]280 \ K * 3.3 \ L = 6.5 \ L * T_2[/tex]
Multiply the left side.
[tex]924 \ K *L=6.5 \ L *T_2[/tex]
We must isolate the variable. Currently, it is being multiplied by 6.5 liters. The inverse of multiplication is division. Divide both sides by 6.5 L.
[tex]\frac { 924 \ K*L}{6.5 \ L}= \frac{ 6.5 \ L *T_2}{ 6.5 \ L}[/tex]
[tex]\frac { 924 \ K*L}{6.5 \ L}= T_2[/tex]
The units of liters (L) cancel.
[tex]\frac { 924 \ K}{6.5 }= T_2[/tex]
[tex]142.153846 \ K= T_2[/tex]
Let's round to the nearest tenth place. The 5 in the hundredth place tells us to round the 1 up to a 2.
[tex]142.2 \ K= T_2[/tex]
The temperature must be cooled to approximately 142.2 Kelvin.
What is a strong base
What term do we use to describe how bright a star “seems” to us here on Earth?
absolute magnitude
apparent magnitud
Answer:
Apparent magnitude
Explanation:
By definition, Apparent magnitude which is usually denoted by "m" is the measure of the brightness of a star or even other astronomical objects that are observed from Earth. Meanwhile the absolute magnitude is defined as the intrinsic luminosity emitted by a star or other astronomical objects.
Thus, apparent magnitude is correct.
What behavior of light PROVES that it is a wave? Hint: will this ONLY happen because light is a wave, or could it also be true of fast moving particles? *
Reflection of light
Absorption of light
Light changes speed in glass and water.
Interference between two or more light waves
Answer:
Light changes speed in a glass of water.
Explanation:
Hello if anyone could help it would be great. Why is cooler material more dense than warmer material?
Lead absorption is decreased by the presence of ______ in the body. a) calcium and vitamin D b) calcium and iron c) iron and selenium
Answer: Correct option is B . calcium and iron decrease the absorption of lead in the body.
Explanation: calcium and iron decrease the absorption of lead in the body without affecting its solubility,probably by competing for shared absorptive receptors in the intestinal mucosa. The total body burden of lead does not affect lead absorption. Thus, lead does not have a feedback mechanism which limits absorption.
Normal text Calibri
25) Look at the way the contour lines point or bend on the topographic map below. Match the blanks on
the map below using the terms "Upstream" or "Downstream" based on the direction the stream is
flowing.
Zo
1?
2.?
In the given bend on the topographic map, 1. is Downstream and 2. is Upstream.
What is Upstream and Downstream of the river?The stream can be described as the moving water in a river is called a stream. Upstream can be described as if the water is flowing in the opposite direction to the stream, it is known as upstream.
Downstream can be described as flowing along the direction of the stream, it is known as downstream.
Still water can be described as under this circumstance the water is stationary and the speed of the water is equal to zero.
All rivers flow downhill from higher elevations to lower elevations and perpendicular to the contour line. As a rule of thumb, the V-shaped contour is representing upstream.
Learn more about Upstream and Downstream, here:
https://brainly.com/question/11194433
#SPJ1
What is the total reduction potential of a cell in which sodium (Na) is reduced and zinc (Zn) is oxidized
The total reduction potential of a cell in which sodium (Na) is reduced and zinc (Zn) is oxidized -1.95 V.
The tendency of a chemical species is to be reduced, expressed in volts under normal conditions, is known as the standard reduction potential.
The standard reduction potential belongs to the group of potentials known as standard electrodes or standard cells. The difference in voltage between the cathode and anode is known as the standard cell potential. The standard sodium reduction potential is -2.71V. Zinc has an average reduction potential of -0.76 V. Therefore, the overall reduction potential is 1.95 V.
Learn more about Reduction Potential
brainly.com/question/1313684
#SPJ4
What types of solutions are made when the temperature increases, then decrease?
a. saturated
b. supersaturated
c. unsaturated
No bots!!!!!! When 20.4 g of sodium metal are mixed with chlorine gas, how many g of NaCl are produced?
51.8 g NaCl
Explanation:
2Na(s) + Cl2(g) ---> 2NaCl(s)
20.4 g Na × (1 mol Na/22.9898 g Na) = 0.887 mol Na
0.887 mol Na × (2 mol NaCl/2 mol Na) = 0.887 mol NaCl
0.887 mol NaCl × (58.44 g NaCl/1 mol NaCl) = 51.8 g NaCl
which of the following is a combustion reaction ? ( please answer asap !! ) <3
Answer: 3
Explanation:
What is the net charge on the following peptide at pH = 0?
Peptide sequence: DSVK
a. net charge = +2
b. net charge = +1
c. net charge = 0
d. net charge = -2
The net charge on the Peptide sequence: DSVK at pH = 0 is : a. net charge = +2.
What is peptide sequence?The process of identifying the amino acids that make up a peptide chain's structural sequence is known as peptide sequencing. This knowledge must be made public in order to understand the structure and function of a protein within a cell, which is useful for biomedical research applications.
By convention, the names of peptides are always written from left to right, beginning with the N-terminal end. For example, the name glycyl-histidine-phenylalanine refers to a peptide that comprises glycine at the N-terminus, followed by a histidine, and then phenylalanine at the C-terminus.
To know more about peptide sequencing , refer
https://brainly.com/question/14775253
#SPJ4
A sample of 25L of NH3 gas at 10°C is heated at constant pressure until it fills a volume of 50L. What is the new temperature in °C?
Answer:
293 oC
Explanation:
Give the ΔH value for the combustion of ethanol as shown in the reaction C2H5OH(g)+3O2(g)⟶Δ2CO2(g)+3H2O(g)+1278 kJ .
Express your answer using four significant figures. If the value is positive, do not include the + sign in your answer.
The value of the ΔH for the reaction is obtained as 1278 kJ .
What is the value of ΔH?We have to note that the enthalpy change of the reaction has to do with the heat that ahs been evolved or absorbed in a reaction. In this case we have to obtain the enthalpy change by looking at the combustion reaction that has been shown here.
It is clear that from the thermochemical reaction equation, there is the evolution of about 1278 kJ of heat in the process of the reaction as shown in the question that we have above.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
A magnesium ion, Mg2+, with a charge of 3. 2×10−19C and an oxide ion, O2−, with a charge of −3. 2×10−19C, are separated by a distance of 0. 25 nm. How much work would be required to increase the separation of the two ions to an infinite distance?
The amount of work required to increase the separation of the two ions to an infinite distance is 3.68×10⁻¹⁸joules.
What is work and energy ?When a push or pull applied to an object causes the object to move, that movement is referred to as work. We refer to energy as the ability to perform the work. The work completed in a given amount of time is referred to as power.
Mg²⁺with a charge is 3.2×10⁻¹⁹C
O²⁻with a charge of −3.2×10⁻¹⁹C
distance = 0.25 = 0.25 ×10⁻⁹m
We know that the constant of proportionality is equal to 8.99×10⁹Jm/C²
Work = -kq₁q₂/d
Substitute given values into the formula,
Work = 8.99×10⁹× 3.2×10⁻¹⁹× -3.2×10⁻¹⁹/ 0.25 ×10⁻⁹
Work = 8.99×10⁹×-1.024×10⁻³⁷/0.25×10⁻⁹
Work = 9.21×10⁻²⁸/ 0.25×10⁻⁹
Work = 3.68×10⁻¹⁸Joules.
To know more about work visit:
https://brainly.com/question/14838284
#SPJ4
Table 4.4 : Metals and Non-metals in Acids and Bases
S.No. Name of the Base Metal Name of the Acid Non-metal
1. Calcium hydroxide Calcium Sulphuric acid Sulphur
2
3
4
5
Answer: devide the concept
Explanation: devide and then answer it
What is the hydrogen ion concentration of a strong acid which has a pH of 6.3
Answer:
5.0 x 10^-7
Explanation:
[H+]=10^-6.3