why does the east coasts of continents usually have a humid climate, while the west coasts of continents have a drier climate?

Answers

Answer 1

The east coasts of continents usually have a humid climate due to several factors. One of the main factors is the prevailing winds. The winds blow from east to west, and as they travel over the ocean, they pick up moisture. When the winds reach the east coast, they release this moisture in the form of rain or snow, leading to a humid climate.

Another factor is the proximity to large bodies of water. The east coasts of continents are usually closer to oceans, which have a high water content and contribute to the humid climate.
On the other hand, the west coasts of continents have a drier climate due to the opposite effects of the prevailing winds. The winds blow from west to east, and as they travel over land, they lose moisture and become drier. Additionally, the west coasts of continents are usually farther from large bodies of water, which means they do not receive as much moisture from the ocean.
Overall, the difference in climate between the east and west coasts of continents can be attributed to the prevailing winds and proximity to large bodies of water. While the east coasts have a humid climate due to these factors, the west coasts have a drier climate as a result.

To know more about east coasts visit:

https://brainly.com/question/31316212

#SPJ11


Related Questions

List the Six criteria pollutants under the CAA. What are their
sources? Distinguish primary and secondary pollution sources?

Answers

Primary sources are direct emissions of pollutants into the atmosphere. For example, a primary source of carbon monoxide would be the exhaust from a vehicle.

1. Carbon Monoxide (CO): Sources include motor vehicle exhaust, industrial processes, and combustion of fossil fuels.

2. Lead (Pb): Sources include lead-acid batteries, smelters, and certain industrial processes.

3. Nitrogen Dioxide (NO2):Sources include motor vehicle emissions, power plants, and industrial combustion processes.

4. Ozone (O3):Formed by the reaction of volatile organic compounds (VOCs) and nitrogen oxides (NOx) in the presence of sunlight. Sources of VOCs and NOx include industrial emissions, motor vehicle exhaust, and chemical solvents.

5. Particulate Matter (PM10 and PM2.5): PM10 refers to particles with a diameter of 10 micrometers or less, while PM2.5 refers to particles with a diameter of 2.5 micrometers or less. Sources include combustion processes, industrial emissions, vehicle exhaust, and dust.

6. Sulfur Dioxide (SO2): Sources include power plants, industrial processes, and combustion of fossil fuels containing sulfur compounds.

learn more about fossil fuels here

https://brainly.com/question/2029072

#SPJ11

on separate pieces of tracing paper, sketch the outlines of the continents of south america and africa found in figure 3.5. move the tracing papers until you get the best fit of the continents. how well do they fit together?

Answers

When looking at the outlines of South America and Africa on separate pieces of tracing paper, it becomes clear that the two continents seem to fit together quite well. This is because, millions of years ago, the two landmasses were actually part of the same supercontinent, known as Gondwana.

Over time, tectonic plate movements caused the supercontinent to break apart and the individual landmasses to drift apart. However, the outlines of the two continents still appear to fit together quite well, indicating their shared geological history. It is interesting to note that this phenomenon is not unique to just South America and Africa - other continents such as Australia, Antarctica, and India also show evidence of being connected to Gondwana at some point in time. Overall, the fit between South America and Africa is a fascinating example of how geological processes have shaped our planet over millions of years.

To know more about Gondwana visit:

https://brainly.com/question/1065080

#SPJ11

An intrusive rock forms when
a.rocks are weathered
b.magma cools underground
c.magma erupts and cools on the surface
d.sediments are lithified

Answers

An intrusive rock forms when The correct answer is b. Magma cools underground.

An intrusive rock forms when molten magma, which is located beneath the Earth's surface, cools and solidifies slowly over time. As the magma cools, it crystallizes and forms an intrusive igneous rock. This process occurs underground, within the Earth's crust, and typically results in the formation of coarse-grained rocks such as granite or diorite. In contrast, the rocks that form from magma that erupts and cools on the surface are called extrusive rocks.

Learn more about earth crust here:

https://brainly.com/question/21302562

#SPJ11

The most sustainable land use in tropical forests is probably
A)logging.
B)cattle grazing.
C)monoculture agroforestry.
D)intensive,efficient modern row cropping.
E)milpa farming.

Answers

The most sustainable land use in tropical forests is probably E)milpa farming.

Milpa farming is a traditional agricultural practice that involves rotating crops on small plots of land and allowing the land to rest for periods of time to regenerate nutrients. This method of farming is sustainable because it works in harmony with the natural environment, promotes biodiversity, and requires minimal inputs of chemicals and fertilizers. In contrast, logging and cattle grazing can cause irreversible damage to tropical forests by disrupting ecosystems and reducing biodiversity. Monoculture agroforestry and intensive row cropping can also be unsustainable if not managed properly and can lead to soil degradation and loss of biodiversity. Therefore, milpa farming represents a promising solution for sustainable land use in tropical forests, as it can support both the environment and local communities while also producing food.

To know more about tropical forests visit:

https://brainly.com/question/11848066

#SPJ11

1. A has broad and moderately steep flanks and a steep summit. It results from the eruption of a mixture of both lava flows and pyroclastic deposits that contain less fluid materials and travel shorter distances.
2. A wide volcano that produces mainly basaltic lava flows is called a .
3. A very steep-sided volcano built primarily from ejected lava fragments is called a .
4. Broad sheets of fluid lava travel long distances and give shield volcanoes their distinctive shape.
5. Moderately viscous and gas-rich lavas can erupt as lava flows or pyroclastic materials, leading to the steepening slope of composite volcanoes.
6. Explosive eruptions of create steep-sided cinder cone volcanoes.
fill in with those words:
cinder cone
basaltic
pyroclastic materials
shield volcano
composite volcano
andesitic

Answers

Composite volcano; A has broad and moderately steep flanks and a steep summit. It results from the eruption of a mixture of both lava flows and pyroclastic deposits that contain less fluid materials and travel shorter distances.

A composite volcano, also known as a stratovolcano, has a characteristic shape with broad and moderately steep flanks and a steep summit. This type of volcano is formed by alternating eruptions of both lava flows and pyroclastic deposits. The lava flows are often moderately viscous and gas-rich, leading to steepening slopes. The pyroclastic deposits contain less fluid materials, such as ash, rocks, and debris, which travel shorter distances compared to the lava flows. The combination of these materials gives composite volcanoes their distinctive shape.

Conclusion: A composite volcano is characterized by broad and moderately steep flanks, a steep summit, and the eruption of both lava flows and pyroclastic deposits containing less fluid materials.

To know more about pyroclastic visit:

https://brainly.com/question/30585052

#SPJ11

Sand dunes in desert areas are dynamic features. Which of the statements below - about these and the corresponding sand transport - is/are true?
Select one or more:
a)
Sand is transported through saltation in the surface load
b)
On the leeward side of the dune, sand is transported through mass movement
c)
Vegetation may stabilize dune migration
d)
Sand grains in a dune are well-sorted and angular
e)
Sand is transported in the suspended load by rolling along the surface
f)
Dunes usually migrate against the wind
g)
None of the alternatives are true

Answers

Answer:

a) Sand is transported through saltation in the surface load.

c) Vegetation may stabilize dune migration.

Explanation:

The correct statements about sand dunes and sand transport are:

a) Sand is transported through saltation in the surface load.

c) Vegetation may stabilize dune migration.

Explanation:

a) Saltation is the process by which sand grains are lifted and transported through a series of short jumps or bounces along the surface.

c) Vegetation, such as plants or grasses, can help stabilize sand dunes by reducing wind speed, trapping sand, and promoting the accumulation of sediment, which slows down or prevents dune migration.

The other statements are not true:

b) On the leeward side of the dune, sand is typically deposited rather than transported through mass movement.

d) Sand grains in a dune are generally well-sorted but rounded, not angular.

e) Sand in the suspended load is carried by wind as fine particles and not by rolling along the surface.

f) Dunes typically migrate in the direction of the prevailing wind rather than against it.

Therefore, the correct answers are a) and c).

Of the statements provided, the true statements about sand dunes and sand transport are a) Sand is transported through saltation in the surface load and c) Vegetation may stabilize dune migration.

In sand dunes, sand transport occurs through various mechanisms. Saltation refers to the process where sand grains are lifted and transported in short, bouncing hops along the surface load. This is a common mode of sand transport in dune systems.

Vegetation, such as grasses or shrubs, can play a role in stabilizing dune migration. The presence of vegetation can help anchor the sand and reduce wind erosion, thereby slowing down the movement of dunes.

The remaining statements (b, d, e, f, and g) are not true in the context of sand dunes and sand transport. Sand is not transported through mass movement on the leeward side of the dune (b), sand grains in a dune are not necessarily well-sorted and angular (d), sand is not transported in the suspended load by rolling along the surface (e), dunes typically migrate with the wind, not against it (f), and none of the alternatives are true (g) is not applicable as some of the statements are indeed true.

Learn more about sand dunes visit:

brainly.com/question/29342478

#SPJ11

"Emissions from motor vehicles is one of the major source of air
pollution in City A. Propose integrated vehicle emission control
schemes with details to improve outdoor air quality.

Answers

To improve outdoor air quality in City A and address emissions from motor vehicles, several integrated vehicle emission control schemes can be implemented:

Vehicle Inspection and Maintenance (I/M) Programs:

Implementing regular vehicle inspection and maintenance programs can help identify and address vehicles that are emitting pollutants above permissible levels. These programs involve regular emission testing and maintenance checks, ensuring vehicles meet specific emission standards. Pros include identifying and repairing high-emitting vehicles, reducing overall emissions, and improving air quality. Cons may include initial setup costs, enforcement challenges, and the need for public awareness and compliance.

Introduction of Low-Emission Zones:

Designating low-emission zones within City A can restrict or ban high-polluting vehicles from entering specific areas. This scheme encourages the use of cleaner vehicles and alternative modes of transportation. Pros include reducing emissions in highly congested or sensitive areas, promoting the adoption of cleaner vehicles, and improving air quality in those zones. However, cons may include the need for proper enforcement and monitoring, potential impacts on traffic flow, and the necessity of alternative transportation options.

Promotion of Electric Vehicles (EVs):

Encouraging the adoption of electric vehicles in City A can significantly reduce emissions from motor vehicles. This can be done through incentives, subsidies, and the development of EV charging infrastructure. Pros include zero-tailpipe emissions, reduced dependence on fossil fuels, and improved air quality. Cons may include limited range of EVs, higher initial costs, and the need for a robust charging network.

Learn more about emissions link:

https://brainly.com/question/32207902

#SPJ11

"what is the effect of ecological footprint on the short-term

Answers

The ecological footprint refers to the impact of human activities on the environment, particularly in terms of resource consumption and waste production.

In the short-term, a large ecological footprint can lead to various negative consequences. Excessive resource consumption, such as overexploitation of natural resources or high carbon emissions, can contribute to environmental degradation and pollution. This can result in immediate consequences such as air and water pollution, habitat destruction, and loss of biodiversity. Additionally, resource scarcity or depletion can impact local communities and economies, leading to social and economic challenges.

Reducing the ecological footprint in the short-term is important for mitigating these negative effects. Adopting sustainable practices, conserving resources, promoting renewable energy, and minimizing waste generation can help alleviate the immediate environmental pressures and contribute to a more sustainable future.

Learn more about  ecological footprint here:

https://brainly.com/question/14441911

#SPJ11

Write the number for the correct concentration zone for natural disasters in America 1. Hurricane Zone 2. Earthquake Zone 3. Volcano Zone 4. Tornado Zone Rone C e zone B 1 zone O zone D A World Clim

Answers

The correct concentration zone for natural disasters in America is Zone 1: Hurricane Zone.

This zone is primarily associated with the Atlantic and Gulf coasts, where hurricanes frequently occur. While earthquakes (Zone 2), volcanoes (Zone 3), and tornadoes (Zone 4) can also pose significant threats in certain regions of America, the question specifically asks for the correct concentration zone. In terms of the highest concentration and frequency of natural disasters, the Hurricane Zone is the appropriate answer.

Learn more about the Atlantic here

https://brainly.com/question/31251342

#SPJ11

Part A - The types of deformation
Identify the type of deformation the rock has been exposed to.
Drag the appropriate labels to their respective targets.
Left to Right
Brittle deformation
ductile deformation
elastic deformation

Answers

I can provide some general information about the types of deformation.

There are three main types of deformation that rocks can experience: brittle deformation, ductile deformation, and elastic deformation.

Brittle deformation occurs when rocks break or fracture due to stress. This type of deformation is common in rocks near the Earth's surface and is associated with earthquakes.

Ductile deformation occurs when rocks bend or flow without breaking. This type of deformation is common in rocks deeper in the Earth's crust, where temperatures and pressures are higher.

Elastic deformation occurs when rocks are temporarily deformed due to stress but return to their original shape when the stress is released. This type of deformation is common in rocks near the Earth's surface and is associated with the elastic rebound theory of earthquakes.

I'm sorry, as an AI language model, I don't have a specific rock or context to identify the type of deformation it has been exposed to. However, I can provide some general information about the types of deformation.

There are three main types of deformation that rocks can experience: brittle deformation, ductile deformation, and elastic deformation.

Brittle deformation occurs when rocks break or fracture due to stress. This type of deformation is common in rocks near the Earth's surface and is associated with earthquakes.

Ductile deformation occurs when rocks bend or flow without breaking. This type of deformation is common in rocks deeper in the Earth's crust, where temperatures and pressures are higher.

Elastic deformation occurs when rocks are temporarily deformed due to stress but return to their original shape when the stress is released. This type of deformation is common in rocks near the Earth's surface and is associated with the elastic rebound theory of earthquakes.

The type of deformation a rock experiences depends on factors such as the type of rock, the temperature and pressure it is exposed to, and the intensity and duration of the stress applied to it.

To know more about earthquakes visit:

https://brainly.com/question/30322293

#SPJ11

There are three types of deformation that a rock can be exposed to: ductile, brittle, and elastic deformation. The correct option is Ductile deformation.

Each type of deformation can result from different stress environments and geologic conditions. The classification of rocks that undergo deformation can be useful in the study of rock mechanics, which provides an understanding of the behavior of rocks under stress.1. Brittle deformationBrittle deformation is the fracture of rocks due to stress. When stress exceeds the strength of the rock, brittle deformation occurs. Brittle deformation includes cracking, faulting, and jointing.2. Ductile deformationDuctile deformation is the bending, folding, and warping of rocks. Ductile deformation occurs in deeper parts of the earth's crust where temperatures and pressures are higher.3. Elastic deformationElastic deformation is the temporary deformation of a rock when stress is applied. When the stress is removed, the rock returns to its original shape. Elastic deformation is a common phenomenon in rocks and is related to the rock's mechanical properties. Rocks that undergo elastic deformation are said to be elastic.What type of deformation a rock undergoes depends on the type of stress applied and the rock's properties. However, rock deformation often occurs in a continuum of these three types. Some rocks may exhibit both brittle and ductile deformation. Others may exhibit both ductile and elastic deformation. Rocks with high strength may not undergo brittle deformation, and rocks that are weak may not undergo ductile deformation. Therefore, it is important to understand the types of deformation in the study of rock mechanics and geological processes.

To know more about ductile deformation visit:

https://brainly.com/question/29388545

#SPJ11

which physical characteristic of land addresses the concept that the geographic location of a piece of land is fixed and can never be changed?

Answers

The physical characteristic of land that addresses the concept that the geographic location of a piece of land is fixed and can never be changed is called immobility.

Immobility refers to the fact that land is a fixed resource and cannot be moved to another location. This characteristic is important for many reasons, including the fact that it allows for stable property values and ensures that landowners have a secure investment. Additionally, immobility makes land a unique resource that cannot be easily replicated or replaced, which further adds to its value. Overall, the concept of immobility is a critical aspect of land ownership and underscores the importance of carefully considering the location of a piece of land before making a purchase.

To know more about immobility visit:

https://brainly.com/question/32005546

#SPJ11

Which of the following geologic environments has lead to the formation of the Andes mountains and Cotopaxi Volcano?
Answer Instruction: Select the answer that most accurately answers the question.
▸ View Available Hint(s)
a mountain range formed due to the movement of tectonic plates along a transform boundary
a continental volcanic arc created due to the subduction of the Nazca Plate beneath the South American Plate
a tectonically inactive region
a continental volcanic arc created due to the divergence (moving apart) of the Nazca Plate and the South American Plate.

Answers

The geologic environment that has led to the formation of the Andes mountains and Cotopaxi Volcano is a continental volcanic arc created due to the subduction of the Nazca Plate beneath the South American Plate. This is a type of convergent boundary where two tectonic plates collide, with one being forced beneath the other. In this case, the denser Nazca Plate is subducting beneath the South American Plate, which has led to the formation of a volcanic arc. The Andes mountains are a result of this process, and Cotopaxi Volcano is one of the many active volcanoes in the region.

The geologic environment that has led to the formation of the Andes mountains and Cotopaxi Volcano is a continental volcanic arc created due to the subduction of the Nazca Plate beneath the South American Plate. This is a type of convergent boundary where two tectonic plates collide, with one being forced beneath the other. In this case, the denser Nazca Plate is subducting beneath the South American Plate, which has led to the formation of a volcanic arc. The Andes mountains are a result of this process, and Cotopaxi Volcano is one of the many active volcanoes in the region. This area is characterized by a high level of seismic and volcanic activity due to the ongoing subduction process. The Andes mountains are the longest continental mountain range in the world, spanning over 7,000 km along the western coast of South America.

To know more about Andes visit:

https://brainly.com/question/29845668

#SPJ11

Warm winds which may occur as air crosses mountain ranges,
descending on the lee side are called:
a) Zonda in the Andes
b) Foehn in the Alps
c) Chinook in the Rocky Mountains
d) All of the above

Answers

Warm winds which may occur as air crosses mountain ranges,

descending on the lee side are called: Zonda in the Andes, Foehn in the Alps and chinook in the Rocky Mountains

Warm winds that occur as air crosses mountain ranges and descends on the lee side are called different names in different regions. In the Andes Mountains, they are referred to as Zonda; in the Alps, they are known as Foehn; and in the Rocky Mountains, they are called Chinook. These warm and dry winds are all examples of downslope winds that result from the adiabatic warming of air as it descends down the leeward side of a mountain range. They can have significant impacts on local weather conditions, causing temperature increases, rapid snowmelt, and changes in atmospheric stability.

Learn more about dry winds here:

https://brainly.com/question/2318070

#SPJ11

What started the war between India and Pakistan over Kashmir?

Responses

Kashmir’s leader chose to join India instead of Pakistan.
Britain agreed to allow Pakistan to control Kashmir.
Britain’s withdrawal from the region left Kashmir unclaimed.
India’s Hindu population claimed Kashmir as its religious home.

Answers

The most true statement among the possibilities is: "Kashmir's leader chose to join India instead of Pakistan."

The rivalry between India and Pakistan over the province of Kashmir dates back to British India's partition in 1947. At the time, princely states were given the option of joining either India or Pakistan depending on their geographical position, demography, and rulers' inclinations. Kashmir, a princely state with a Muslim majority but a Hindu king, found itself in a difficult predicament.

Hari Singh, the Maharaja (ruler) of Kashmir, first desired independence. However, in the midst of turmoil and tribal assaults from Pakistan, he requested military aid from India. In exchange, he consented to join India in October 1947.

For more questions on  British India's partition

https://brainly.com/question/30226487

#SPJ8

Which of the following statements about the new renewable alternatives would be considered false:
A. The sources have helped create a new sector of 'green collar jobs.
B. The sources can be used to generate electricity or heat water.
C. The sources all reduce greenhouse gas emissions
D. The sources have tremendous potential.
CE. Usage is growing rapidly and will soon compete with conventional energy sources

Answers

Answer:

B

Explanation:

E. Usage is growing rapidly and will soon compete with conventional energy sources.

While renewable energy sources have been growing in usage and have the potential to compete with conventional energy sources, the statement that they will soon compete with conventional energy sources is not universally true.

The growth and competition of renewable energy sources depend on various factors, including policy support, technological advancements, infrastructure development, and market dynamics. While renewable alternatives have made significant progress, they may still face challenges in terms of scale, cost-effectiveness, and integration into existing energy systems.

Learn more about energy sources here:

https://brainly.com/question/30378300

#SPJ11

1. What's happening to the lava in the lava lake inside the volcano in Ethiopia? What large- scale process does this mimic? 1 2. What causes the geysers and boiling pools of water in Iceland? How is t

Answers

The lava in the lava lake inside the volcano in Ethiopia is undergoing continuous movement and circulation.

This is primarily due to the convective currents within the lake. This process mimics the large-scale process of convection, which occurs in Earth's mantle and drives plate tectonics.

The geysers and boiling pools of water in Iceland are primarily caused by geothermal activity. Iceland sits on the Mid-Atlantic Ridge, a divergent plate boundary where the Eurasian and North American plates are moving apart. When the water reaches a critical temperature and pressure, it rapidly boils and erupts, creating the geysers. The boiling pools of water result from the hot water being trapped in depressions or basins.

In both cases, the underlying cause is the heat generated from Earth's interior. However, the specific geological conditions and mechanisms involved in each location give rise to different manifestations of geothermal activity.

Learn more about convection here:

brainly.com/question/4138428

#SPJ11

An environmentally sustainable economy is best defined as one that
a. balances the rate of species extinction with that of species evolution
b. controls the production of pollutants
c. reduces the consumption of energy resources
d. satisfies current needs without jeopardizing the prospects of future generations

Answers

An environmentally sustainable economy can be best defined as one that D)satisfies the current needs without compromising the ability of future generations to meet their own needs.

This means that the economy should be able to provide for the needs of the people while keeping in mind the preservation and conservation of the environment. The focus should be on creating a balance between economic development and environmental protection. In a sustainable economy, there should be a control on the production of pollutants, a reduction in the consumption of energy resources and the implementation of sustainable practices that promote biodiversity and ecosystem health. Overall, the goal of a sustainable economy is to ensure that economic growth is achieved in a way that is environmentally friendly and sustainable for future generations. This can only be achieved through long-term planning and effective implementation of policies that promote sustainable practices in all sectors of the economy.

To know more about sustainable economy visit:

https://brainly.com/question/28497694

#SPJ11

Use the diagram shown. If BC = 13, AB = 7, and the perimeter of triangle ABC is 33, then what is the value of BD

Answers

Answer:

guys the answer to the question is given by 33=7+13+ b

b=33-20=13

According to Warren, at 1° Celsius, in addition to the trends we are already observing, oceans will further acidify, natural ecosystems will start to collapse, and as many as 18-60 million people in the developing world will go hungry. At 1.5° Celsius the Greenland ice sheet will melt, eventually causing a 7m rise in sea level, inundating coastal areas. At 2° Celsius agricultural yields in the rich nations will start to fall and 1-3 billion people will experience water scarcity. At 3° Celsius the Amazon rainforest is expected to collapse and at 4° Celsius most of Africa and
Australia will lose all agricultural production.
vi. Fill in the blank: In order to avoid reaching 450pm of atmospheric CO2 the trend
in the data would have to become (???Calculus Term???). vii. Provide a (general or real world related question that you would like answered based on your work here. This should not be something that you could answer
yourself with a little work.
viii. Summarize your work on questions 1-5 in a short paragraph as if it were a news
article.

Answers

In order to avoid reaching 450 ppm of atmospheric CO2, the trend in the data would have to become negative. This means that greenhouse gas emissions would need to significantly decrease, and efforts to mitigate climate change would have to be intensified to reduce the concentration of CO2 in the atmosphere.

vii. Question: What are the potential consequences and impacts of reaching 450 ppm of atmospheric CO2 and beyond?

viii. News Article Summary:

A recent analysis by Warren highlights the alarming consequences of global warming at different temperature thresholds. With a rise of 1°C, we can expect further ocean acidification, ecosystem collapse, and a significant increase in hunger for millions in the developing world. At 1.5°C, the Greenland ice sheet melting poses a grave threat, leading to a potential 7-meter rise in sea level that would inundate coastal areas. Agricultural yields in wealthy nations could start declining at 2°C, and a staggering 1-3 billion people may face water scarcity. The Amazon rainforest is at risk of collapse at 3°C, while at 4°C, agricultural production could be lost in large parts of Africa and Australia. To avoid reaching the critical threshold of 450 ppm of atmospheric CO2, the data trend would need to become negative, requiring substantial reductions in greenhouse gas emissions and intensified climate mitigation efforts.

Learn more about global warming visit:

brainly.com/question/31661349

#SPJ11

Shanidar 1 is the name of the discovery of remains of an elderly Neandertal in a cave in Iraq. What is one of the special things about this find?
a.His crania is more robust than modern humans but otherwise identical
b.His was the only fossil in the cave, indicating he lived an isolated life
c.The extent of his injuries indicates he may been cared for by other members of his group
d.Both of arms were completely intact

Answers

The special thing about the Shanidar 1 discovery is that the extent of the Neandertal's C) injuries indicates he may have been cared for by other members of his group. This is significant because it suggests that Neandertals had a level of compassion and social behavior that was not previously attributed to them.

The Neandertal had several injuries, including a damaged eye socket and arm that had healed, indicating that he may have been disabled or elderly. The fact that he survived for an extended period of time after sustaining these injuries suggests that other members of his group helped care for him. This discovery challenges the notion that Neandertals were primitive and unsophisticated, and instead suggests that they were capable of complex social behavior and empathy. Overall, the Shanidar 1 discovery sheds new light on our understanding of Neandertals and their behavior.

To know more about Neandertal visit:

https://brainly.com/question/32107009

#SPJ11

List the three types of land use in Brazil in order from greatest to least.


PLS HURRY FOR A TEST

Answers

The three types of land use in Brazil, listed in order from greatest to least, are forests and natural vegetation, agriculture, and urban and built-up areas

Land use in Brazil in hierarchy

Forests and Natural Vegetation: The Amazon Rainforest is the largest tropical rainforest in the world and dominates Brazil's land use. It provides important ecosystem services and is vital for biodiversity conservation.

Agriculture: Brazil is a major agricultural producer and has abundant arable land. The country exports commodities like soybeans, beef, poultry, coffee, and sugarcane. Both large-scale commercial farming and smaller-scale family farming contribute to this land use.

Urban and Built-Up Areas: Brazil has a large population, leading to the expansion of cities and urban areas. Residential, commercial, and industrial zones form a significant but smaller portion of the country's land use.

Learn more on land use in Brazil here https://brainly.com/question/1160737

#SPJ1

suppose that the new england colonials baseball team is equally likely to win a game as not to win it. if 4 colonials games are chosent at random, what is the probbility that exactly 3 of those games are won by the colonials

Answers

The probability that exactly 3 of the 4 randomly chosen games are won by the Colonial is 0.25 or 25%.

Using the binomial probability formula:

P(X = k) = C(n, k) * [tex]p^k[/tex] * [tex]q^{(n-k)[/tex]

Substituting the values:

P(X = 3) = C(4, 3) * 0.5³ * [tex]0.5^{(4-3)[/tex]

C(4, 3) = 4! / (3!(4-3)!) = 4

0.5³  = 0.125

[tex]0.5^{(4-3)[/tex] = 0.5

P(X = 3) = 4 * 0.125 * 0.5 = 0.25

Colonial is a term that historically referred to the early European settlers who established colonies in various parts of the world. These individuals, primarily from Western European countries, embarked on voyages of exploration and settlement, seeking new territories and resources. The term commonly applies to the period of colonization during the 15th to 19th centuries.

Colonial played a crucial role in shaping the course of world history, as they established settlements that eventually grew into powerful nations. They introduced their languages, cultures, and governance systems to the lands they colonized, often at the expense of indigenous populations.

To know more about Colonial refer here :

brainly.com/question/730598

#SPJ4

Because N often limits primary production, adding an ever-increasing amount of plant-available N will continually increase primary production. True False"

Answers

False. Because N often limits primary production, adding an ever-increasing amount of plant-available N will continually increase primary production.

While nitrogen (N) is an essential nutrient for primary production, there is a concept known as the law of limiting factors, which states that the growth and productivity of an organism or ecosystem are limited by the nutrient that is in the shortest supply relative to the needs of the organisms. Adding an ever-increasing amount of plant-available nitrogen will not continually increase primary production because other factors, such as the availability of other nutrients (e.g., phosphorus, potassium), light, temperature, and water, can also limit primary production.

Once nitrogen becomes sufficient and no longer limits primary production, the growth and productivity may be limited by other factors. For example, if phosphorus becomes the limiting factor, adding more nitrogen will not result in a further increase in primary production. Therefore, while nitrogen is important for primary production, the availability of other essential nutrients and environmental factors must also be considered to achieve optimal growth and productivity.

Learn more about environmental factors visit:

brainly.com/question/29529998

#SPJ11

In six sentences or less, briefly describe the process of wave
refraction at a headland and how this action can lead to the
straightening out of a coastline?

Answers

Wave refraction at a headland occurs when waves approach a coastline with irregularities such as headlands or bays.

As waves encounter the headland, they slow down in shallower water near the coast, causing the wave fronts to bend or refract. This bending of wave fronts redirects the energy of the waves, causing them to focus and concentrate on the headland.
The concentrated energy of the waves on the headland leads to increased erosion, particularly on the sides facing the incoming waves. Over time, this erosion can result in the headland becoming narrower, as the softer rock or sediment is eroded away more rapidly.
Simultaneously, the bays or indentations adjacent to the headland experience reduced wave energy due to the wave refraction. With less wave energy reaching these areas, deposition of sediment can occur, gradually filling in the bays and straightening out the coastline.
The combined processes of erosion at the headland and sediment deposition in the adjacent bays contribute to the straightening out of the coastline, as the headland is eroded and the bays are filled in. This process can take place over an extended period and is influenced by various factors such as wave energy, sediment availability, and the geology of the coastline.

Learn more about coastline link:

https://brainly.com/question/31443316

#SPJ11

How did ancient cultures, such as from Egypt and Mexico (Mesopotamia and Mesoamerica) view light, primarily?
As divine.
As a means to describe forms in space realistically.
As part of the transcendent or sublime in nature.
As a means to capture the subjective, visual, sensory experience an individual at a particular moment in time, seeing something as though just at a glance.
As a visual element to work with in creating their designs.

Answers

Ancient cultures, including those from Egypt, Mesopotamia, and Mesoamerica, viewed light primarily in various ways, encompassing multiple perspectives.

1. As divine: Light was often associated with the divine or spiritual realm, symbolizing illumination, enlightenment, and the presence of deities. It represented the divine order, knowledge, and wisdom.

2. As a means to describe forms in space realistically: Ancient cultures recognized the importance of light in understanding and representing the physical world. They observed how light interacted with objects and used this knowledge to depict forms realistically in their art and architecture.

3. As part of the transcendent or sublime in nature: Light was seen as a manifestation of the transcendent or sublime aspects of nature. It evoked awe, beauty, and a sense of the extraordinary, representing the mysterious and cosmic forces.

4. As a means to capture the subjective, visual, sensory experience: Ancient cultures valued the role of light in capturing subjective experiences and sensory perceptions. They recognized the transformative power of light in shaping one's visual perception and emotional response to the world.

5. As a visual element to work with in creating designs: Ancient cultures utilized light as a visual element in their artistic creations. They harnessed its qualities, such as brightness, contrast, and shadow, to enhance their designs and compositions.

Learn more about the Ancient cultures here:

https://brainly.com/question/29462742

#SPJ11

Match the five primary air mass regions to the correct definition
Polar
Tropical
Arctic
Continental
maritime
A. formed poleward of 60° north or south
B. formed over the oceans
C. formed over large landmasses
D. formed over the Arctic
E. formed within about 30° of the equator

Answers

The five primary air mass regions are polar, tropical, arctic, continental, and maritime. To match each region to the correct definition, we have:

Polar: formed poleward of 60° north or south. This air mass is characterized by cold temperatures and low moisture content.

Tropical: formed within about 30° of the equator. This air mass is characterized by warm temperatures and high moisture content.

Arctic: formed over the Arctic region. This air mass is characterized by very cold temperatures and low moisture content.

Continental: formed over large landmasses. This air mass is characterized by dry conditions and large temperature fluctuations between day and night.

Maritime: formed over the oceans. This air mass is characterized by humid conditions and relatively stable temperatures.

The five primary air mass regions are polar, tropical, arctic, continental, and maritime. To match each region to the correct definition, we have:

Polar: formed poleward of 60° north or south. This air mass is characterized by cold temperatures and low moisture content.

Tropical: formed within about 30° of the equator. This air mass is characterized by warm temperatures and high moisture content.

Arctic: formed over the Arctic region. This air mass is characterized by very cold temperatures and low moisture content.

Continental: formed over large landmasses. This air mass is characterized by dry conditions and large temperature fluctuations between day and night.

Maritime: formed over the oceans. This air mass is characterized by humid conditions and relatively stable temperatures.

It is important to understand the characteristics of these air mass regions because they influence weather patterns in different parts of the world. The movement and interaction of these air masses can lead to the formation of storms, precipitation, and changes in temperature.

To know more about tropical visit:

https://brainly.com/question/31034027

#SPJ11

the known water depth is 6000 m. an acoustic energy pulse travels down and back in 8 seconds. what is the velocity of the acoustic energy through the seawater medium?

Answers

The velocity of acoustic energy through the seawater medium, we can use the formula: Velocity = 2 * Depth / Time

The velocity of acoustic energy through the seawater medium, we can use the formula: Velocity = 2 * Depth / Time. In this case, the known water depth is 6000 m, and the time it takes for the acoustic energy pulse to travel down and back is 8 seconds. Substituting these values into the formula: Velocity = 2 * 6000 m / 8 s. Calculating this expression, the velocity of the acoustic energy through the seawater medium is 1500 m/s. Please note that this calculation assumes a round-trip time for the acoustic energy pulse and does not take into account any variations in the speed of sound due to temperature, salinity, or pressure.

Learn more about the acoustic energy here:

https://brainly.com/question/31720364

#SPJ11

how far below the earth's surface are most diamonds crystallized

Answers

Most diamonds are crystallized at a depth of around 100 to 200 kilometers below the Earth's surface.

This is in the upper mantle of the Earth where the conditions are just right for the formation of diamonds. The upper mantle is made up of rocks that are under high pressure and high temperature, which is the perfect environment for diamond formation. The diamonds are formed from carbon that is subjected to extreme heat and pressure, causing it to crystallize into the diamond form. Once the diamonds are formed, they are carried closer to the surface by volcanic activity, which is why diamond mines are often located near volcanoes. While diamonds can be found at shallower depths, most high-quality diamonds are found deeper down where the conditions for formation are ideal.

To know more about diamonds visit:

https://brainly.com/question/31816989

#SPJ11

The table shows human development indicators from 2013. A 3-column table with 4 rows titled Human Development Indicators, 2013. Column 1 is labeled Country and rank with entries 1, Norway; 29, Greece; 91, Colombia; 182, Mali. Column 2 is labeled Life expectancy with entries 81.3, 80, 73.9, 51.9. Column 3 is labeled Years of education with entries 12.6, 10.1, 7.3, 2. What does the table indicate about standard of living? Colombia has a very high standard of living. Greece has a low standard of living. Mali has a low standard of living. Norway has a mid-range standard of living.

Answers

The table presents some data on human development indicators for four countries in 2013. Human development indicators are measures of average achievement in key dimensions of human development, such as health, education and income. According to the table, Norway ranked first in the world in terms of human development, while Mali ranked last among the countries shown. Norway had the highest life expectancy and years of education among the four countries, indicating a high standard of living. Greece ranked 29th in human development, with a slightly lower life expectancy and years of education than Norway, but still above the world average. Colombia ranked 91st in human development, with a moderate life expectancy and years of education, indicating a medium standard of living. Mali ranked 182nd in human development, with a very low life expectancy and years of education, indicating a low standard of living.

About low standard of living

Low standard of living is a state or condition in which a person or community does not have the financial resources and basic needs for a certain level of life. Poverty can have a variety of social, economic, and political causes and effects.

Learn More About low standard of living at https://brainly.com/question/2696547

#SPJ11

According to the small angle equation, if an object at a fixed distance is suddenly shrunk to a smaller size, then the angular size will…
- Stay the same
- Increase
- There’s not enough information to say for sure
- Decrease

Answers

According to the small angle equation, the angular size of an object is directly proportional to its physical size and inversely proportional to its distance from the observer. Therefore, if an object at a fixed distance is suddenly shrunk to a smaller size, then its angular size will decrease. This is because the physical size of the object has decreased while its distance remains the same, resulting in a smaller angle between the observer and the object. So, the correct answer to the question is "Decrease". It's important to note that the small angle equation is only valid for small angles, which are typically less than a few degrees.

According to the small angle equation, the angular size of an object is directly proportional to its physical size and inversely proportional to its distance from the observer. Therefore, if an object at a fixed distance is suddenly shrunk to a smaller size, then its angular size will decrease. This is because the physical size of the object has decreased while its distance remains the same, resulting in a smaller angle between the observer and the object. So, the correct answer to the question is "Decrease". It's important to note that the small angle equation is only valid for small angles, which are typically less than a few degrees. If the angle is large, then other factors such as perspective and distortion can come into play.

To know more about proportional visit:

https://brainly.com/question/31548894

#SPJ11

Other Questions
on january 1, payson incorporated had a retained earnings balance of $44,000. during the year, payson reported net income of $32,400 and paid cash dividends of $19,400. calculate the retained earnings balance at its december 31 year-end. rebecca notices that as winter approaches and the days get shorter, colder, and less sunny, she feels increasingly sad and down. rebecca's friend suggests that she try a treatment in which she sits by a high-intensity light source for a short period of time each day. rebecca's friend is suggesting that she try:a. phototherapyb. cognitive-behavioral therapyc. behavioral therapyd. a mood stabilizer In a state lottery four digits are drawn at random one at a time with replacement from 0 to 9. Suppose that you win if any permutation of your selected integers is drawn. Give the probability of winning if you select: a. 6,7,8,9 b. 6,7,8,8, c. 7,7,8,8 d. 7,8,8,8 In this assignment, you'll create a C++ Date class that stores a calendar date.. You'll test it using the supplied test main() function (attached below).In your class, use three private integer data member variables to represent the date (month, day, and year).Supply the following public member functions in your class.A default constructor (taking no arguments) that initializes the Date object to Jan 1, 2000.A constructor taking three arguments (month, day, year) that initializes the Date object to the parameter values.It sets the Date's year to 1900 if the year parameter is less than 1900It sets the Date's month to 1 if the month parameter is outside the range of 1 to 12.It sets the Date's day to 1 if the day parameter is outside the range of days for the specific month. Assume February always has 28 days for this test.A getDay member function that returns the Date's day value.A getMonth member function that returns the Date's month value.A getYear member function that returns the Date's year value.A getMonthName member function that returns the name of the month for the Date's month (e.g. if the Date represents 2/14/2000, it returns "February"). You can return a const char* or a std::string object from this function.A print member function that prints the date in the numeric form MM/DD/YYYY to cout (e.g. 02/14/2000). Month and day must be two digits with leading zeros as needed.A printLong member function that prints the date with the month's name in the form dd month yyyy (e.g. 14 February 2000) to cout. This member function should call the getMonthName() member function to get the name. No leading zeroes required for the day.The class data members should be set to correct values by the constructor methods so the get and print member functions simply return or print the data member values. The constructor methods must validate their parameter values (eg. verify the month parameter is within the range of 1 to 12) and only set the Date data members to represent a valid date, thus ensuring the Date object's data members (i.e. its state) always represent a valid date.The print member function should output the date in the format MM/DD/YYYY with leading zeros as needed, using the C++ IOStreams cout object. To get formatting to work with C++ IOStreams (cout), look at the setw() and setfill() manipulator descriptions, or the width() and fill() functions in the chapter on the C++ I/O System.#include #include #include using namespace std; // or use individual directives, e.g. using std::string;class Date{// methods and data necessary};Use separate files for the Date class definition (in Date.h), implementation of the member functions (Date.cpp), and the attached test main() function (DateDemo.cpp). The shortest member functions (like getDay() ) may be implemented in the class definition (so they will be inlined). Other member functions should be implemented in the Date.cpp file. Both Date.cpp and DateDemo.cpp will need to #include the Date.h file (since they both need the Date class definition in order to compile) and other include files that are needed (e.g. iostream, string, etc).-----main function used for data and to test class----// DateDemo.cpp// Note - you may need to change the definition of the main function to// be consistent with what your C++ compiler expects.int main(){Date d1; // default ctorDate d2(7, 4, 1976); // July 4'th 1976Date d3(0, 15, 1880);// Adjusted by ctor to January 15'th 1900d1.print(); // prints 01/01/2000d1.printLong(); // prints 1 January 2000cout the human eye can response to as little as 10-18 j of light energy. for a wavelength near the peak of visual sensitivity, 550 nm, what is the minimum number of photons that lead to an observable flash? (be sure to round up, and submit your answer without units.) Find all values of m so that the functiony = x^mis a solution of the given differential equation. (Enter your answers as a comma-separated list.)x^2y'' 8xy' + 20y = 0 This problem asks you to "redo" Example #4 in this section with different numbers. Read this example carefully before attempting this problem. Solve triangle ABC if ZA = 43.1, a = 185.6, and b= 244. need help with bothSuppose that f(x) dx = 6 and bre f(x) dx = -5, and o) x = 9(x) dx = -1 and (*_*) dx 3. Compute the given integral. $ 1994 ) - 94 - -9(x)) dx Suppose that f(x) dx = 8 and f(x) dx = -4, and Se Find the position vector for a particle with acceleration, initial velocity, and initial position given below. a(t) = (4t, 3 sin(t), cos(6t)) 7(0) = (3,3,5) 7(0) = (4,0, -1) F(t) Some observations give the graph of global temperature as a function of time as: There is a single inflection point on the graph a) Explain, in words, what this inflection point represents. b) Where is temperature decreasing? for the following estimated CAPM stock XYZ return= 0.003+1.38(MARKET RETURN)what is the financial interpretation 1.38 the process of helping families or couples settle disputes or dissolve their relationships in a nonadversarial way is called: group of answer choices A binary classifier's accuracy is frequently a poor-quality measurement of its positive predictive ability. True. False You want to invest in a project in Wonderland. The project has an initial cost of W787,000. It is expected to produce cash inflows of W379,000 a year for 4 years. The project will be worthless after that. . The expected inflation rate in Wonderland is 2% while it is 4% in the U.S. The applicable interest rate for a project like this in Wonderland is 13%. . The current spot exchange rate is W1.0000 = $5.4321. What is the Net Present Value of this project in Wonderland's currency (i.e., in "W")? Increase decimal places for any intermediate calculations, from the default 2 to 6 or higher, and only round your final answer to TWO decimal places: for example, 10,000.23. Do NOT use "currency units" in your answer. HINT: You won't need to use all the numbers that are given! what does the cost approach to finding an appraised value measure? unset starred question the cost to acquire a property only the cost to acquire land and construct a reproduction the cost to construct a reproduction only the expenses the property is expected to produce for the owner the computer must be removed from a late model vehicle. tech a says to keep one hand on chassis ground when handling the computer. tech b says to wear an anti-static wrist strap when handling the computer. who is right? Write a recursive formula for the sequence: { - 12, 48, - 192,768, 3072, ...} - ai = -12 9 an" Which mixture contains all of the elements in a typical fertiliser? A) ammonium nitrate and calcium phosphate B)ammonium phosphate and potassium chloride C)potassium nitrate and ammonium chloride D)potassium carbonate and ammonium nitrate Using business philosophies, what is strategy? What are keyconsiderations in developing a strategy? certain balance sheet accounts of a foreign subsidiary of rowan inc., at december 31, have been translated into u.s. dollars as follows: translated at current rates historical rates note receivable, long-term $240,000 $200,000 prepaid rent 85,000 80,000 patent 150,000 170,000 $475,000 $450,000the subsidiary's functional currency is the currency of the country in which it is located. what total amount should be included in rowan's december 31 consolidated balance sheet for the above accounts?