write the abbreviation for the base unit of each of these quantities in the metric system. mass: m length:

"The human perception of pitch primarily depends on frequency. " The correct answer is option: D.

Pitch refers to the subjective quality of sound that enables us to distinguish between high and low sounds. Frequency is physical property of sound that measures the number of cycles of vibration per second and is measured in hertz. The higher  frequency of a sound wave, the higher  pitch we perceive. This is because our ears are sensitive to different frequencies and can distinguish between them based on activity of the hair cells in  cochlea of the inner ear. While loudness, resonance, and intensity can also affect our perception of sound, they are not  primary factors that determine pitch. Hence correct answer is option: D.

To know more about Frequency, here

brainly.com/question/5102661

#SPJ4

---The complete question is , The human perception of pitch primarily depends on __.

A. Loudness

B. resonance

C. intensity

D. frequency --

Answer:

The kinetic energy is more than half of its maximum energy

Momentum may be demonstrated to be conserved for a properly described system using Newton's third law.

Newton's third law may be used to show that momentum is preserved for a system that is adequately defined. The Earth is being drawn towards the item in an equal and opposing force to that of gravity acting on the object while it is in free fall. As a result, the object's momentum is transferred to the Earth, which has a considerably higher mass and is hence more difficult to detect. The system's overall momentum—that of the Earth and the object—remains preserved. An open system like this one allows momentum to be shared with the environment while yet adhering to conservation standards.

learn more about Newton here:

https://brainly.com/question/4128948

#SPJ4

Rotation period for a mass of 0.550 kg at the same radius is 1.45 s.

The rotation period of a mass in circular motion is given by:

T = 2πR/v

where T is the period, R is the radius of the circular path, and v is the velocity of the mass.

For the first mass with a mass of 0.45 kg, radius R of 0.140 m, and period T of 1.45 s, we can calculate the velocity as follows:

v = 2πR/T = 2π(0.140 m)/(1.45 s) = 0.6066 m/s

Now, we can use the velocity and radius values to find the period for the second mass with a mass of 0.550 kg:

T = 2πR/v = 2π(0.140 m)/(0.6066 m/s) = 1.45 s

Therefore, the rotation period for a mass of 0.550 kg at the same radius is 1.45 s.

learn more about 'rotation':https://brainly.com/question/16931421

#SPJ11

Answer:

False, Other guy is wrong

Explanation:

The equation is not the same

Most of the mass of the solar system is located in the Sun. The Sun accounts for over 99% of the total mass of the solar system, with the remaining mass distributed among the planets, asteroids, comets, and other objects.

The solar system is a collection of objects that orbit around the Sun. It consists of the Sun, eight planets and their natural satellites, dwarf planets, asteroids, comets, and other small bodies. The eight planets, listed in order from the Sun, are Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune.

The Sun is at the center of the solar system and contains more than 99% of the mass of the solar system. It is a giant ball of gas, mostly hydrogen, and helium, and is the source of heat and light for the entire solar system.

Learn more about the Sun:

https://brainly.com/question/15837114

#SPJ11

The difference in energy between successive oscillation energy values is determined by the system's unique parameters, such as mass, spring constant, and oscillation amplitude.

The system and oscillation frequency both affect the energy differential between subsequent oscillation energy values. In general, an oscillating system's energy is exactly proportional to the oscillation's amplitude squared.  As a result, if the oscillation's amplitude varies slightly, the change in energy will be proportional to the square of that change. two significant figures and include the appropriate units.Typically, oscillation energy is expressed in joules (J). If we take a basic harmonic oscillator as an example, the energy difference between successive oscillation energy values is equal to 1/2 the spring constant (k) times the square of the oscillation's amplitude. The energy difference in this situation is proportional to the amplitude squared, and the energy difference.

learn more about  energy  here:

https://brainly.com/question/1932868

#SPJ4

The DC average of the waveform is 3 V.

The duty cycle of the square wave is the ratio of the pulse width to the total period of one cycle. The total period is the sum of the pulse width and the gap between pulses.

In this case, the pulse width is 25 ms and the gap between pulses is 75 ms, so the total period is:

Total period = pulse width + gap between pulses = 25 ms + 75 ms = 100 ms

The duty cycle can be calculated as:

Duty cycle = (pulse width / total period) x 100%

Duty cycle = (25 ms / 100 ms) x 100% = 25%

The DC average of the waveform is the average voltage over one cycle. Since the waveform is a square wave that alternates between 0 V and 12 V, the DC average can be calculated as:

DC average = (duty cycle) x (maximum voltage)

DC average = 0.25 x 12 V = 3 V

Therefore, the DC average of the waveform is 3 V.

Learn more about total period here : brainly.com/question/12634120

#SPJ1

The furthest protoplanet from the Sun is most likely to become a jovian planet due to the abundance of solid ice grains in the outer regions.

Jovian planets, otherwise called gas goliaths, are enormous planets that are fundamentally made out of hydrogen and helium, with a thick climate and no strong surface. These planets are accepted to have shaped further from the Sun than the earthly planets, in locales of the sun oriented cloud where the temperature was low enough for hydrogen and helium to consolidate into strong ice grains, known as planetesimals. This is on the grounds that in the external districts of the sun based cloud, the temperature was low enough for strong ice grains to collect and shape a strong center, which could then accumulate gas from the encompassing cloud to frame a thick air.Consequently, the protoplanet found uttermost from the Sun has a more prominent probability of turning into a jovian planet because of the overflow of strong ice grains in the external locales of the sun powered cloud.

To learn more about jovian planet, refer:

https://brainly.com/question/18089177

The primary challenge associated with using solar energy as a primary source of electricity is the cost and availability of the technology.

Cost: One of the significant challenges of solar energy is its cost. Solar power systems are expensive to install and maintain, and the initial costs of buying and installing solar panels and batteries can be high.

Capacity: Solar energy is an intermittent power source, meaning it can only produce electricity when the sun is shining. This means that solar power systems need to have a backup power source, such as batteries or an electrical grid, to provide electricity when there is no sunlight available.

Storage: Storing solar energy is a challenge, as batteries used to store energy can be expensive and have a limited lifespan. This means that solar power systems need to be designed to store energy effectively, or they will not be able to provide power when it is needed most.

Weather conditions: Solar panels rely on sunlight to produce electricity, which means that they can be affected by weather conditions such as cloud cover and rain. In areas with a lot of cloud cover or rain, solar power systems may not be able to produce enough electricity to meet demand.

Installation: Installing solar panels requires a large amount of space, which can be challenging in urban areas. Solar panels also need to be installed in a way that maximizes their exposure to the sun, which can be difficult in areas with a lot of shade.

Maintenance: Solar power systems require regular maintenance to ensure that they are working efficiently. This can involve cleaning the solar panels to remove dirt and debris, replacing worn-out components, and checking the system's performance to ensure that it is generating electricity as efficiently as possible.

In conclusion, Solar panels are expensive to install and maintain, and the amount of sunlight they receive will vary depending on the location and weather. Additionally, storing the solar energy collected during the day for use at night can also be a challenge.

To know more about Solar Energy, refer here:

https://brainly.com/question/9704099#

#SPJ11

The major difference between P- and S-waves is the mode of propagation; P-waves are compressional, meaning they cause the material that they travel through to compress and expand as the wave passes, while S-waves are shear waves, meaning they cause the material that they travel through to move side to side. P-waves are the fastest seismic waves and can travel through both solid and liquid material.

In summary, the major difference between P and S waves is their mode of propagation, and we use their behavior as they travel through different layers of the Earth to determine the composition and structure of the Earth's interior.

To know more about mode of propagation click here:

https://brainly.com/question/12945893

#SPJ11

Answer:

The answer for Work done is 60J or 60Nm

Explanation:

Work done=Force×distance

W=15×4

W=60J or 60Nm

Answer:

To explain the energy of two blocks, several types of evidence can be used depending on the context and the specific question being asked. Here are some examples:

Kinetic energy: The kinetic energy of a moving object is given by the formula KE = 0.5 * m * v^2, where m is the mass of the object and v is its velocity. If the two blocks are moving, their kinetic energy can be calculated using this formula.

Potential energy: The potential energy of an object is the energy it possesses by virtue of its position or configuration. If the two blocks are lifted to a certain height, they will possess potential energy due to their position in the Earth's gravitational field. The potential energy of an object is given by the formula PE = m * g * h, where m is the mass of the object, g is the acceleration due to gravity, and h is the height above a reference point.

Work done: If a force is applied to move the two blocks, work is done on them. The work done on an object is given by the formula W = F * d, where F is the force applied, and d is the distance over which the force is applied.

Conservation of energy: The law of conservation of energy states that energy cannot be created or destroyed, only converted from one form to another. Therefore, if the energy of the two blocks changes, it must be due to the transfer of energy from one form to another, such as from potential energy to kinetic energy or vice versa.

Overall, the evidence used to explain the energy of two blocks will depend on the specific context of the question being asked and the type of energy being considered.

The speed at which the pulse moves in music is known as its tempo. Tempo is measured in beats per minute (BPM) and is the speed of the underlying pulse of a piece of music.

Tempo is the speed at which a piece of music is played. It is measured in beats per minute (BPM), and it affects the overall mood of a piece of music. The tempo of a piece of music is typically determined by the composer, but it may also be affected by the performer's interpretation. Different types of music have different tempos; for example, a ballad may have a slow tempo, while a dance tune may have a fast tempo.

The speed at which the pulse moves in music is known as its tempo. Tempo can vary significantly between pieces and is often indicated in a piece's score with the terms allegro (fast), moderato (moderate) or largo (slow).

In music, the pulse refers to the beat that you can feel in the music. It is the underlying rhythm that keeps the music moving forward. The pulse is usually created by the drums or other percussion instruments in the music, but it may also be created by other instruments or by the vocals. Different types of music have different pulses; for example, a ballad may have a slow-moving pulse, while a dance tune may have a fast-moving pulse.

For more such questions on tempo , Visit:

https://brainly.com/question/3451676

#SPJ11

According to the question the speed of the balls just before they collide is 1.81 m/s.

Collide is a term used to describe the process of two objects or particles coming into contact with each other, often resulting in a collision. In physics, the term is used to refer to the force of two objects impacting one another. In everyday language, the term is used to describe two things, such as people or ideas, coming together in a way that produces a powerful impact.

The initial energy of the system can be calculated as:
[tex]E_{initial[/tex] = m₁*g*h + 0
where m_1 is the mass of the upper ball (2.0 kg), g is the acceleration due to gravity (9.8 m/s²), and h is the vertical distance between the two balls (12.0 cm).
The final energy of the system can be calculated as:
[tex]E_{final} = (m_1 + m_2)\times v^2[/tex]
where m_1 and m_2 are the masses of the two balls (2.0 kg and 3.0 kg, respectively), and v is the velocity of the lower ball when the two balls stick together.
From these equations, we can solve for v:
[tex]v = sqrt[(m_1\timesg\timesh)/(m_1 + m_2)] = sqrt[(2.0 kg\times9.8 m/s^2\times12.0 cm)/(2.0 kg + 3.0 kg)] = 1.81 m/s[/tex]
Therefore, the velocity of the lower ball when the two balls stick together is 1.81 m/s.

To learn more about collide
https://brainly.com/question/29312023
#SPJ1

The maximum kinetic energy of the ejected electrons when light consisting of 4.8 eV photons is incident on a piece of aluminum with a work function of 4.3 eV is 0.5 eV. The correct option is D.

Here's a step-by-step explanation:

1. When light consisting of photons with a certain energy (in this case, 4.8 eV) is incident on a metal (aluminum), it interacts with the electrons in the metal.

2. The energy of the photons is used to do work on the electrons to overcome the work function of the metal. The work function is the minimum energy required to free an electron from the surface of the metal.

3. In this case, the work function of aluminum is 4.3 eV. Since the energy of the incident photons is 4.8 eV, which is greater than the work function, the electrons can be ejected from the aluminum.

4. The maximum kinetic energy of the ejected electrons is determined by the difference between the energy of the incident photons and the work function of the metal. This is because any extra energy from the photons (beyond the work function) is converted into kinetic energy for the ejected electrons.

5. To calculate the maximum kinetic energy, subtract the work function (4.3 eV) from the energy of the incident photons (4.8 eV): Maximum kinetic energy = 4.8 eV - 4.3 eV = 0.5 eV

So, the maximum kinetic energy of the ejected electrons is 0.5 eV.

To know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

A brick is falling from the roof of three story building then free-body diagram would show only one force vector, which is the force of gravity acting on the brick.

A free-body diagram is used to graphically represent the forces acting on an object. It shows all of the forces acting on an object and can be used to analyze the motion of an object.

A free-body diagram for a falling brick would include two force vectors: Gravity or Weight.

So, in this scenario, the free-body diagram would show only one force vector, which is the force of gravity acting on the brick.

To lean more about the 'force vectors':

https://brainly.com/question/30893090

#SPJ11

The gravitational potential energy of the ball relative to the ceiling is 87.9 J.

The gravitational potential energy of an object of mass m at a height h above a reference level (in this case, the ceiling) is given by:

U = mgh

where g is the acceleration due to gravity.

In this problem, the ball is suspended from the ceiling by a string, so its height above the ceiling is the length of the string, minus the radius of the ball. Assuming the ball is a sphere with a radius of 0.135 m (half the length of the string), we can calculate its height above the ceiling as:

h = 4.45 m - 1.35 m + 0.135 m = 3.24 m

(Note that we subtract the length of the string from the height of the room, and add half the length of the string to account for the radius of the ball.)

Plugging in the given values, we get:

U = (2.70 kg)(9.81 m/s^2)(3.24 m)

U = 87.9 J

Therefore, the result is 87.9 J.

Learn more about the potential energy: https://brainly.com/question/24284560

#SPJ11

Ganymede is the largest moon in the solar system. Scientists believe that Ganymede, like Europa, has a subsurface ocean of liquid water because of the magnetic field it produces.

Magnetic fields are areas around a magnet or a moving electric charge where magnetic forces are present. The magnetic field's magnitude and direction at each point in space are used to define a magnetic field. Magnetic fields are produced by electric charges in motion.

Magnetic fields are present in the universe in the form of stars, galaxies, and even black holes. Magnetic fields have a significant impact on our planet's electromagnetic environment, from the polar auroras to the solar wind interaction with the Earth's magnetosphere. The Earth has its own magnetic field that plays a vital role in our planet's habitability.

Magnetic fields are useful in a variety of ways, from generating electricity in power plants to levitating trains to keeping our smartphones and other electronic devices charged. Magnetic fields have a plethora of applications in technology and research.

Therefore, scientists infer that Ganymede has a subsurface ocean of liquid water due to the magnetic field it generates, similar to Europa.

To know more about magnetic field click here:

https://brainly.com/question/14848188

#SPJ11

If the same horizontal net force were exerted on both vehicles, pushing them from rest over the same distance, the ratio of their final kinetic energies will be 1:1.

The kinetic energy of an object depends on its mass and velocity, and if the force and distance traveled are the same, the velocity of the vehicles at the end of the distance will be the same. The kinetic energy of an object can be calculated using the formula: KE = 1/2mv². Where KE is the kinetic energy, m is the mass, and v is the velocity of the object. If the force and distance traveled are the same for both vehicles, their final velocities will also be the same. Therefore, the ratio of their final kinetic energies will be 1:1, regardless of the mass of the vehicles. The mass of an object only affects its kinetic energy when the force applied is not the same. In that case, the object with the larger mass will have a smaller velocity and therefore smaller kinetic energy, even if the distance traveled is the same.

Learn more about kinetic energy at https://brainly.com/question/20658056

#SPJ11

The initial speed given to the rock was approximately 100.96 m/s.

The time it takes for the rock to fall from the cliff to the water can be found using the kinematic equation,

h = 1/2gt^2

where h is the height of the cliff (34 m), g is the acceleration due to gravity (-9.81 m/s^2), and t is the time it takes for the rock to fall. Solving for t,

t = sqrt(2h/g) = sqrt(2 * 34 / 9.81) = 2.15 s

The horizontal velocity of the rock can be found using the equation,

v = d/t

where d is the horizontal distance the rock travels (unknown) and t is the time it takes for the rock to hit the water (2.78 s). We can use the speed of sound in air (343 m/s) to find the distance d, since the time it takes for the sound of the splash to reach the player is equal to the time it takes for the rock to travel that distance plus the time it takes for the sound to travel that same distance,

2.78 s = t + d/343

Solving for d,

d = (2.78 - t) * 343 = (2.78 - 2.15) * 343 = 217.11 m

Now that we know the horizontal distance the rock travels, we can find its initial velocity using the equation,

v = d/t = 217.11/2.15 = 100.96 m/s

To know more about speed, here

brainly.com/question/30622344

#SPJ4

Anne is wrong. The actual mechanical advantage of the ramp is 4.

To determine whether Anne is correct in saying that the mechanical advantage of a 2.00 meter ramp that is 0.50 meters high is 0.25, we need first to calculate the mechanical advantage of the ramp.

The mechanical advantage of a ramp is defined as the ratio of the length of the ramp to its height. In this case, the length of the ramp is 2.00 meters and its height is 0.50 meters. So the mechanical advantage of the ramp is:

Mechanical advantage = Length of ramp / Height of ramp

Mechanical advantage = 2.00 meters / 0.50 meters

Mechanical advantage = 4

Therefore, Anne is incorrect in saying that the mechanical advantage of the ramp is 0.25.

More on mechanical advantages can be found here: https://brainly.com/question/16617083

#SPJ1

The combined magnitude of the two stars is 12.14.

The combined magnitude of the two stars is 12.14. What is a binary system? A binary system is a star system consisting of two stars that orbit one another around their mutual center of gravity. Astronomers believe that most stars are part of a binary or multiple star system. As a result, the Sun is most likely a binary star, though no companion star has been detected or recognized. How to calculate the combined magnitude of the two stars?. The formula to calculate the combined magnitude of the two stars is: m= -2.5log10(I1 + I2) + C Where, m = MagnitudeI1, I2 = Intensities of the stars C = Constant The combined magnitude of the two stars is given as: m = -2.5log10(2.512(-12.5) + 2.512(-12.9)) + C For C = 0, the answer is calculated as: m = -2.5log10(2.512(-12.5) + 2.512(-12.9))m = -2.5 * (-12.14)m = 30.35Therefore, the combined magnitude of the two stars is 12.14.

Learn more about  Combined Magnitude

brainly.com/question/30588646

#SPJ11

Explanation:

To solve this problem, we can use the law of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces.

Before the collision, the momentum of the blue clay is:

momentum of blue clay = mass of blue clay * velocity of blue clay

= 2 kg * 1.5 m/s = 3 kg*m/s to the east (positive)

Before the collision, the momentum of the red clay is:

momentum of red clay = mass of red clay * velocity of red clay

= 1.5 kg * (-2.5 m/s) = -3.75 kg*m/s to the west (negative)

The total momentum before the collision is:

total momentum before collision = momentum of blue clay + momentum of red clay

= 3 kgm/s - 3.75 kgm/s = -0.75 kg*m/s to the west (negative)

After the collision, the two clays stick together and move as one combined object. Let's assume that the final velocity of the combined clay pieces after the collision is v.

By the law of conservation of momentum, the total momentum after the collision is equal to the total momentum before the collision:

total momentum after collision = total momentum before collision

= -0.75 kg*m/s

The combined mass of the two clays after the collision is:

combined mass = mass of blue clay + mass of red clay

= 2 kg + 1.5 kg = 3.5 kg

Therefore, the final velocity of the combined clay pieces after the collision is:

v = total momentum after collision / combined mass

= (-0.75 kg*m/s) / 3.5 kg

= -0.214 m/s to the west (negative)

Since the negative velocity indicates a direction to the west, the final velocity of the combined clay pieces after the collision is 0.214 m/s to the west.

The acceleration of a car is zero when it is driving up a long straight incline at constant speed.

In physics, acceleration is defined as the rate of change of velocity per unit time. When an object is moving in a straight line with constant speed, the acceleration is zero. This means that there is no change in the object's velocity or direction. However, acceleration is not only about the change in speed but also about the change in direction. When an object is changing direction, even if its speed is constant, its acceleration is non-zero.

Now let's look at the given options:

Traveling over the crest of a hill at a constant speed - acceleration is non-zero because crests are usually curved which means there is some centripetal acceleration associated with the car.

Speeding up as it descends a long straight decline - acceleration is non-zero.

Driving up a long straight incline at a constant speed - acceleration is zero

Bottoming out at the lowest point of a valley at a constant speed - acceleration is non-zero because valleys are usually curved so there is some centripetal acceleration associated with the car.

Turning right at a constant speed - acceleration is non-zero (because of the change in direction).

Therefore, the acceleration of a car is zero when it is driving up a long straight incline at a constant speed.

Learn more about acceleration:

https://brainly.com/question/460763

#SPJ11

The spring constant, k, is 0.00694 N/m or 6.94 kg/s2. the spring is compressed by 1.00 cm and the total stored potential energy is 0.00694 j.

To calculate the spring constant, k, if the spring is compressed by 1.00 cm and the total stored potential energy is 0.00694 J, you can use the following equation:

k = 2E/x2

Where E is the stored potential energy, and

x is the displacement of the spring.

So, plugging in the given values:

k = (2 × 0.00694) / (1.00 cm)2

  = 0.00694 N/m or 6.94 kg/s2

for such more question on spring constant

https://brainly.com/question/23885190

#SPJ11

The final answer are average electric field in the fringe region is smaller than in the central region in parallel electrodes.

According to Gauss's law, the electric field's magnitude E between two parallel plates carrying uniform charge densities σ1 and σ2 in a vacuum is given by the formula; E = σ1 - σ2 / ε0 where ε0 is the permittivity of free space.

A fringe region is formed near the edges of parallel plates, where the electric field's strength is weak due to the presence of fringe fields.

The electric field between two plates with uniform charge densities is constant over the central region and weaker at the edge region.

So, the average electric field in the fringe region is smaller than in the central region.

To know more about electric field refer here:

https://brainly.com/question/15800304#

#SPJ11

The mass, in units of me (the mass of the earth), of a planet with twice the radius of the earth for which the escape speed is twice that of the earth is 8 me.

The amount of matter in an object is referred to as mass. Mass is expressed in terms of the unit kilogram in the International System of Units (SI).

The escape velocity is defined as the minimum velocity required for an object to leave the gravitational influence of another object. For example, if a ball is thrown from the surface of the earth at a speed of 11.2 km/s (40,320 km/h), it will escape the earth's gravitational pull and continue into space.

The formula for escape velocity is given by:

  v=√(2GM/r)

Where, v is the escape velocity, G is the gravitational constant, M is the mass of the planet, and r is the radius of the planet.

The formula for mass:

  m = v²r/Gm = (2v)²(2r)/GMm = 8r/G

Therefore, the mass, in units of me (the mass of the earth), of a planet with twice the radius of earth for which the escape speed is twice that of the earth is 8 me.

Learn more about escape velocity at https://brainly.com/question/29911258

#SPJ11

D) introduce a dielectric material between the plates, and E) decrease the separation between the plates will increase the capacitance of a parallel-plate capacitor.

The capacitance of a parallel-plate capacitor is given by the formula:

C = εA/d

where C is the capacitance, ε is the permittivity of free space, A is the area of the plates, and d is the distance between the plates.

From this formula, we can see that the capacitance is directly proportional to the area of the plates and the permittivity of free space, and inversely proportional to the distance between the plates. Therefore, the following changes will increase the capacitance of a parallel-plate capacitor:

D) Introduce a dielectric material between the plates: A dielectric material has a higher permittivity than air, which increases the capacitance of the capacitor.

E) Decrease the separation between the plates: A decrease in the distance between the plates increases the capacitance of the capacitor.

Therefore, the correct choices are D) introduce a dielectric material between the plates, and E) decrease the separation between the plates.

Learn more about Capacitor: https://brainly.com/question/17176550

#SPJ11

If your mass, the mass of earth, and the mass of everything in the solar system were twice as much as it is now, yet everything stayed the same size, your weight on earth would be twice as much as it is now.

The weight of an object is equal to the force of gravity acting on its mass. When the mass of an object increases, the force of gravity on it also increases. So, if your mass, the mass of the earth, and the mass of everything in the solar system were twice as much as it is now, yet everything stayed the same size, the force of gravity would be twice as much as it is now.

As a result, your weight on earth would be twice as much as it is now. Therefore, the correct answer is twice as much as it is now. Weight is the measure of the force of gravity acting on the mass of an object. The unit of weight is Newtons (N), and its value depends on the mass of the object and the gravitational field it is in. Weight is a vector quantity, meaning it has both magnitude and direction.

Learn more about gravitational field at:

https://brainly.com/question/8843426

#SPJ11