Answer:
Cocoa butter, the fat in chocolate, can crystallize in any one of 6 different forms (polymorphs, as they are called). Unfortunately, only one of these, the beta crystal (or Form V), hardens into the firm, shiny chocolate that cooks want. Form VI is also a stable hard crystal, but only small amounts of it form from the good beta (Form V) crystals upon lengthy standing. When you buy commercial chocolate it is in the form of beta crystals.
When you melt chocolate and get it above 94° F, you melt these much desired beta crystals and other types of crystals can set up. If you simply let melted chocolate cool, it will set up in a dull, soft, splotchy, disgusting-looking form. Even the taste is different. Fine chocolate has a snap when you break it and a totally different mouthfeel from the other cocoa butter forms.
Answer:
When you melt chocolate and get it above 94° F, you melt these much desired beta crystals and other types of crystals can set up. If you simply let melted chocolate cool, it will set up in a dull, soft, splotchy, disgusting-looking form. Even the taste is different. Fine chocolate has a snap when you break it and a totally different mouthfeel from the other cocoa butter forms.
Explanation:
hope it's help you......!!!!!!!
#rishu
As a professor Daniel must complete a research project each year in order to
stay on staff. Daniel is an engineer and has to deal with many complicated
mathematical calculations. Knowing this fact Daniel would most likely concern
himself with qualitative research,
Explanation:
Add our site sources in order to be advantage of knowledge
What is the structure of a fluorine atom?
Answer:
The nucleus consists of 9 protons and 10 neutrons. Nine electrons occupy available electron shells.
what happens to concrete after heating it
Which of the following are considered physical properties of a substance?
Color and odor
malleability and hardness
melting and boiling points
all of the above
hi <3
the correct option would be all of the above
hope this helps :)
Find the density of mercury if 205 mL has a mass of 2790 g round your answer to the nearest 0.1 g
Answer:
13.6g/L
Explanation:
The formula for density is D=m/V
D = Density in grams per liter (g/L)
m = Mass of sample in grams
V = volume of sample in liters
Convert 205mL to Liters as follows:
205mL (1L/1000mL) =0.205L
then simply plug into the equation for density:
2790g/0.205L = D= 13.6g/L
Fractions of crude oil
Answer:
Fractions. There are several ways of classifying the useful fractions that are distilled from crude oil. One general way is by dividing into three categories: light, middle, and heavy fractions. Heavier components condense at higher temperatures and are removed at the bottom of the column.
Answer:
Fraction: No. of carbon atoms: Boiling point range oC:
Gasoline (petrol) 4 - 12 32-160oC
Kerosine (paraffin) 11 - 15 160-250oC
Diesel oil 15 - 19 220-350oC
Residue lubricating oil heavy fuel oil bitumen C Above 350oC
Explanation:
Fractions. There are several ways of classifying the useful fractions that are distilled from crude oil. One general way is by dividing into three categories: light, middle, and heavy fractions. Heavier components condense at higher temperatures and are removed at the bottom of the column
grass → rabbit → fox
Explain why energy is lost by the rabbits in the middle step of this food chain.
Answer:
The rabbit losses energy by great and waste
Explanation:
The grass loses energy by respiration and a rabbit from eating other living organisms but when the fox eats the rabbit no if not little energy is passed to the fox
is water?
A. a substance made up of two different elements (hydrogen and oxygen)
B. an element
Answer:
A substance made up of two different elements (hydrogen and oxygen)
How does water vapor in the air change state below the freezing point
Answer:
Water vapor molecules in the air near the can cooled when energy from the air transferred to the cold can. These water molecules slowed down, condensed to liquid water, and then froze to become ice. Your can might have some water and some ice on the outside of it.
Explanation:
Can someone explain this to me, please?
A stable sodium atom has 11 electrons. The sodium isotope [tex]Na_{24}[/tex] has:
A.) How many protons?
B.) How many neutrons?
C.) An atomic number of what?
Answer:
Isotopes have same atomic numbers, no. of protons and no. of electrons. Only their no. of neutrons and atomic mass are changed.
Na - 24:
Atomic Mass = 24
Atomic No. = 11
Hence,
No. of protons in Na-24 = 11
No. of neutrons = Atomic Mass - Atomic Number
No. of neutrons = 24 - 11
No. of neutrons = 13
Atomic Number = 11
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807Peace!ons below.
Which diagram shows the correct electron
configuration for fluorine (F)?
Option A is correct way of representation of electronic configuration.
Define measurement. why is it important in our life?
Answer:
Measurements are so often taken for granted we sometimes do not appreciate the grand importance measurements play in our lives. On a baseline level, measurements fall into the categories of weight, area, volume, length and even temperature. While we look at these various categories as stoic forms of mathematical measurements a closer examination of things we do in everyday life reveals their clear importance.
Explanation:
Measurements provide structure and remove the chaos that would result without any congruent method of understanding weight, mass, temperature, etc.
Answer:
The comparison of unknown physical quantity with the known standard quantity of the same kind is called measurement.
Measurements play an important role in daily life because they are useful to do basic tasks, such as take a child's temperature with a thermometer, make time estimations, measure out medicine and find weights, areas and volumes of different materials or substances.
Hope it helps you.Marta wants to explain how pollution is affecting the biodiversity of a local lake. Which of the following models are most appropriate options to use in her explanation? I. Graph II. 3-D model III. Simulation
Answer:
Graph models are most appropriate options to explain how pollution is affecting the biodiversity of a local lake.
Explanation:
Marta wants to explain how pollution is affecting the biodiversity of a local lake
For explanation
we have to use the graph because graph only shows the gradual level of of pollution that affect the biodiversity of a lake and water resources.
3D model and simulation is also effective but graph model is is more effective than other
To learn more about pollution refer:
https://brainly.com/question/20782855https://brainly.com/question/12191761nước tự nhiên là chất hay hổn hợp
nước tự nhiên là chất đó bạn
A student is investigating potential and kinetic energy by stretching a spring across a table
At which step is the potential energy in the spring the greatest
Answer: when it’s fully stretched across the table
Explanation: because when it’s stretched it has the most potential kinetic energy
Plant and Animal Cells
С
B
F
1 20 points
Which letter represents the brain of the cell?
о B
H
H
Why
E
D
G
Answer:
Nucleus is known as the brain of the cell.
correct option is B letter
What do the nuclei of 1H hydrogen atoms contain?
protons only
electrons and protons
electrons and neutrons
neutrons only
Answer:
"Protons only"
Explanation:
Hydrogen has one proton in its nucleus. It does have one electron rotating outside of the nucleus, BUT NOT IN THE NUCLEUS. 'A' is the correct answer.
May someone help me with the answer to this question I’ve been stuck on it
Explanation:
No, that would be incorrect
Answer:
There arre two main parts of the atom, the nucleus and the orbital rings. The three subatomic particles are contained in each of these, the proton and neutron together in the nucleus and the electrons orbiting in the rings.
who knows india??????
Answer:
Me India is located in Asia and its capital name is New Delhi.
Explanation:
[tex]india \\ 1)india \: is \: the \: 7 \: th \: largest \: country \\ 2)home \: to \: old \: civilizations \\ 3)father \: of \: the \: nation \: mahathma \: gandi \\ 4)country \: is \: divided \: in \: to \: 28state \\ 5)1000of \: lnguages \: 100 \: of \: cultures \: \\ so \: india \: is \: very \: much \: attractive \\ very \: much \: special \\ 1947 \: august15 \: indias \: independce \: day \\ thank \: you \: \\ jai \: hind[/tex]
Assertion : When the added electron goes to smaller n=3 quantum level, the electron-
electron repulsion is much less.
Reason: The added electron occupies a smaller region of space .
It is due to low volume of electron that causes large distance between two electrons.
When the added electron goes to smaller quantum level, the repulsive force between two electrons is less because the electron which is added occupies small space due to less volume so there is a large distance between two electrons that leads to less force of repulsion.
If the electron has more volume so it occupies more space and there will more repulsive force between two electrons so that's why we can say that the smaller volume of electron is the reason of less repulsive force.
https://brainly.com/question/24387646
Which statement about metals and nonmetals is correct? (1 point)
O Metals and nonmetals can both be found in any column of the periodic table.
O Most metals are a solid under normal conditions, and most nonmetals are a liquid.
O Metals tend to be poor conductors of electricity, while nonmetals are strong conductors of electricity.
O Metals can be hammered into thin sheets, and nonmetals are brittle
Answer:
The answer is the 4th one
The statement about metals and nonmetals that is correct is: "The Metals can be hammered into thin sheets, and nonmetals are brittle."
Metals are found mostly towards the left hand side of the periodic table. Non-metal character increases as you move towards the right hand side of the table.
One common property of metals is that they are malleable; this means that they can be hammered into sheets while a common property of nonmetals is that most of them are brittle.
Learn more: https://brainly.com/question/10714037
stute 2 lomportance of weather fore castings
Answer:
Climatology and Weather Forecasting is important since it helps determine future climate expectations.Forecasts based on temperature and precipitation are important to agriculture, and therefore to traders within commodity markets. Temperature forecasts are used by utility companies to estimate demand over coming days.Explanation:
Climatology and Weather Forecasting is important since it helps determine future climate expectations. Through the use of latitude, one can determine the likelihood of snow and hail reaching the surface. You can also be able to identify the thermal energy from the sun that is accessible to a region.
Define uniform and non-uniform motion.
Answer:
When a body covers equal distances in a straight line, equal intervals of time are called uniform motion
When a body covers unequal distance in equal intervals of time in a straight line is called non-uniform
Answer:
Uniform motion- is motion in which the
velocity does not change.
Non-uniform motion-occurs when the velocity of an object is not
constant : the object speeds up or slows down during its motion, or changes direction.
Hope it will help you !!
A student conducts an experiment to determine the speed of a toy car at the bottom of a ramp after it is released from different heights on the ramp. The student makes one measurement for each height.
What is one way that the student could improve the experiment?
use a different ramp for each height
perform multiple trials for each release height instead of just one
use a different timer for height
perform one trial for each measurement but use a different car for each height
Answer:
perform multiple trials for each release height instead of just one
Explanation:
Most electrochemical cells are the site of redox reactions. They contain 2 electrodes, the ______ where reduction occurs and the _______
A. cathode, anode
B. None of these
C. anode, galvanode
D. anode, cathode
Answer:
A.cathode,anodeExplanation:
positive and negative
pls make me the brainliestwhy does the s orbital fill before the p orbital
Answer:
The s orbital is lower in energy than the p orbital
Explanation:
S-orbital electrons are simultaneously closer to the nucleus (more stable) and farther from the nucleus (less stable) compared to the corresponding p-orbitals. This makes them favorable to occupy when no p-electrons are present, but less favorable to occupy when p-electrons are present, which is why they are filled first but ionize first.
Complete the following sentences by writing in the correct word.
In a neutral atom, the number of electrons must be the same as the number of
.
The subatomic particle in an atom with no charge is the
.
The number of protons in an atom is the
number.
The total number of protons and neutrons in an atom is the
number.
1)proton number
2)neutron
3)(Z)
4)mass
This is an image of ice
cubes made of water. Is
water (or ice) a mixture or a
compound made up of
molecules?
А.
a mixture
В.
a compound made up of molecules
Answer:
it is a compound made up of molecules
Circle the two terms in each group that are related. Explain how the terms are related.
16. Celsius degree, mass, Kelvin
17. balance, second, mass
18. kilogram, liter, cubic centimeter
19. time, second, distance
20. decimeter, kilometer, Kelvin
Answer:
16) Celsius degree and Kelvin are related since they are measuring unit of temperature.
(17) Balance and Mass are related since mass can be measured with balance.
18) Liter and cubic centimeters are related since they are used to measure capacity or volume of liquid.
19) time and second are related since time is measured in second
20) decimeter and kilometer are related since they are measuring unit of distance or displacement.
Explanation:
The two terms in each group that are related are Celsius and Kelvin, balance and mass, liter and cubic centimeter, time and second, and decimeters and kilometers.
What are Celsius and Kelvin?Celsius and Kelvin are the units and they are related to each other because both of them can be used to determine or to define the temperature of the environment for anything which is needed to be measured.
The balance and mass are related to the balancing of mass and kilogram with centimeter cubic are related for density and time and second is related to each other last decimeters and kilometers unit of lengths.
Therefore, two terms in each group that are related are Celsius and Kelvin, balance and mass, liter and cubic centimeter, time and second, and decimeters and kilometers.
Learn more about Celsius and Kelvin, here:
https://brainly.com/question/14618997
#SPJ2
If you were converting from Milli- to Centi- units, how many decimal places would you move?
Answer:
1 decimal place
Explanation:
centi- is 10 times larger than milli- (centi- = 0.01 milli- = 0.001)
1 mili is equal to the 0.01 centi. Since all metric units differ by powers of ten, changing between them just necessitates moving the decimal point to the left or right.
What is difference between millimeter and centimeter ?The actual ratio is 10 millimeters to 1 centimeter. Now, it is clear that centimeters are bigger than millimeters.
There is no change in volume, these measurements are the same. The main distinction is that fluid quantities are measured in milliliters, but solid quantities are measured in cubic centimeters. 1 cc is 1 mL no matter what is being measured.
The units used to measure length are centimeters and millimeters, respectively. 1 cm is equivalent to 10 mm, and 1 millimeter is equal to 0.1 centimeter.
Thus, for converting from Milli- to Centi- units 10 digit place would be move.
To learn more about millimeter and centimeter refer the link below;
https://brainly.com/question/17251149
#SPJ2